Lenovo E2001bA, ThinkVision E2002bA User Manual


Add to my manuals
16 Pages

advertisement

Lenovo E2001bA, ThinkVision E2002bA User Manual | Manualzz

E200 b A

LCD Monitor

User’s Guide

TABLE OF CONTENTS

ABOUT THIS GUIDE------------------------------------------------------------------------1

NATIONAL CONVENTIONS---------------------------------------------------------------1

FCC NOTICE --------------------------------------------------------------------------------- 2

PRECAUTIONS ------------------------------------------------------------------------------- 3

SETUP THE STAND AND BASE ------------------------------------------------------- 4

ADJUSTING VIEWING ANGLE ---------------------------------------------------------- 4

ATTACHING THE CABLES --------------------------------------------------------------- 6

WALL MOUNTING -------------------------------------------------------------------------- 7

EXTERNAL CONTROLS ------------------------------------------------------------------ 8

OSD SETTINGS ---------------------------------------------------------------------------- 9

IMAGE ADJUSTMENT -----------------------------------------------------------------10

LED INDICATORS -----------------------------------------------------------------------10

PROBLEMS AND SOLUTIONS ----------------------------------------------------- 1 1

SPECIFICATIONS ------------------------------------------------------------------------- 1 2

PRESET DISPLAY MODES ---------------------------------------------------------- 1 3

PIN ASSIGNMENTS --------------------------------------------------------------------1 3

PLUG AND PLAY ----------------------------------------------------------------------1 4

About This Guide

This guide describes the monitor’s features, setup, and operation. lnformation in this document is subject to change without notice.

The sections are as follows:

• Safety Instructions: lists safety information.

• Setup: describes the initial setup process.

• Using the Monitor: gives an overview of how to use the monitor.

• Technical Support : provides tips and solutions for common problems.

• Product Information: lists the technical specifications of the monitor.

National Conventions

The following subsections describe national conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your computer system

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem

WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem

Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.

FCC Notice

FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED

MODELS)

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

NOTICE :

1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is there sponsibilities of the user to correct such interference.

Precautions

WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards

Read and follow these precautions when connecting and using your computer monitor:

PRECAUTIONS

• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

• Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.

• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided.

• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

• The monitor is equipped with a three-pronged grounded plug, a plug with a third

(grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.

If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.

• Unplug the unit during a lightning storm or when it will not be used for long periods of time.

This will protect the monitor from damage due to power surges.

• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

• Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor.

• Do not attempt to service the monitor yourself; opening or removing covers can expose you to dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.

• To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V AC, Min. 5A.

• The wall socket shall be installed near the equipment and shall be easily accessible.

• Please make sure to clean the cabinet regularly with the provided cloth , you can use soft-cleanser to clean the stain , instead of severe spray cleanser which will cauterize the monitor cabinet.

• Don’t leak liquid into monitor which will result in the damage of chassis or component.

Please unplug before cleaning ,and do not scratch the screen with hard things.

• For displays with glossy bezels the user should consider the placement of the display as

the bezel may cause disturbing reflections from surrounding light and bright surfaces.

Setup the stand and base

Please setup or remove the base following below steps.

Adjusting Viewing Angle

• For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.

• Hold the stand so you do not topple the monitor when you change the monitor’s angle.

• You are able to adjust the monitor’s angle from 3 ° ~ -7 ° to 20 ° ~24° .

3 °~7 °

20°~24°

NOTE: Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Swivel

With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle.

360 360

Height Adjustment

After pressing the top of the monitor, remove the fixed pin and adjust the height of the monitor.

Monitor Pivot

- Adjust height to the top position before rotation the monitor.

- Rotate clockwise until the monitor stops at 90°.

- 'RQRWURWDWHWKHDQWLFORFNZLVH .

5

Attaching the Cables

Cable Connections On Back of Monitor and Computer

1. Power Cord

2 . DVI Cable

3 . Analog Cable

Turn off your computer before performing the procedure below.

1. Connect the power cable to the AC port on the back of the monitor.

2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.

3. (Optional – Requires a video card with DVI port) - Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s DVI port.

4 . Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, see

Troubleshooting.

6

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Follow these steps:

1. Remove the base.

2. Follow the manufacturer’s instructions to assemble the wall mounting arm.

3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor.

4. Insert the 4 screws into the holes and tighten.

5. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on attaching it to the wall.

Noted : VESA mounting screw holes are not available for all models, please check with the dealer or the reseller nearest your house.

7

External Controls

Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure ). By changing these settings, the picture can be adjusted to your personal preferences.

* The power cord should be connected.

* Press the power button to turn on the monitor. The power indicator will light up.

1 2 3 4 5

1 Auto / Exit

2 - / ECO

3

4

+ / Image Ratio

Menu / Enter

5 ON / OFF

8

OSD Settings

• Press the MENU-button to activate the OSD window.

• Press + or - to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. If the function selected has a sub-menu, press + or - again to navigate through the sub-menu functions.

Once the desired function is highlighted, press MENU-button to activate it.

• When the OSD is closed, press - button will be ECO Hot-Key Function, press + button will be Image Ratio Function.

• OSD Lock Function: To lock the OSD, press and hold the Menu button while the monitor is off and then press power button to turn the monitor on. To unlock the OSD , press and hold the Menu button while the monitor is off and then press power button to turn the monitor on.

• Auto configure hot key: When the OSD is closed, Source window will be pop-up

when press auto button, continue to press Auto button will changed to next source

if available, then press Menu button will execute change input source; When the

OSD is closed, press Auto button continuously about 3 second to do auto configure,

or it will be Exit function.

Contrast

Brightness

Eco Mode

DCR

Luminance

50

90

Standard

Off

AUTO :Exit :Move MENU :Select

9

Image Adjustment

Luminance

Contrast

Brightness

Eco

DCR

Image Setup

Clock

Phase

H .

Position

V .

Position

Image Ratio

Color Temperature

Warm

Normal

Cool sRGB

Red

Green

Blue

OSD Setup

V. Position

H. Position

Timeout

Language

Extra

Input Select

DDC / CI

Reset

Information

LED Indicators

Status

Full Power Mode

Active-off Mode

Adjust Range

0-100

0-100

Standard

Text

Internet

Game

Movie

Sports

On/Off

0-100

0-100

0-100

0-100

Wide/4:3

6500K

7200K

9300K

0-100

0-100

0-100

0-100

0-100

0-100

'68%

D 9,

On/Off

On/Off

Description

Contrast from Digital-register

Backlight Adjustment

Standard Mode

Text Mode

Internet Mode

Game Mode

Movie Mode

Sports Mode

Dynamic contrast ratio

Adjust picture Clock to reduce Vertical-Line noise

Adjust Picture Phase to reduce Horizontal-Line noise

Adjust the horizontal position of the picture

Adjust the vertical position of the picture

Select Image Aspect Ratio

Recall Warm Color Temperature

Recall Normal ColorTemperature

Recall Cool Color Temperature

Recall SRGB Color Temperature

Red Gain from Digital-register

Green Gain Digital-register

Blue Gain from Digital-register

Adjust the Vertical position of OSD

Adjust the Horizontal position of OSD

Adjust the OSD Timeout

Select the OSD language

Select '68% Signal Source as Input

Select '9, Signal Source as Input

Select DDC/CI on or off

Reset the menu to default

Show the resolution, H/V frequency of current input timing

LED Color

Blue

Amber

10

Problems and Solutions

Problem and Questions

Power LED is Not ON

No Plug & Play

Possible Solutions

• Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor

• In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer & video card. Check with your computer manufacturer.

Also check the monitor’s video cable and make sure none of the pins are bent

• Make sure the Monitor’s Drivers are installed

Picture is Fuzzy and has

Ghosting Shadowing Problem

• Adjust the Contrast and Brightness Controls

• Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to the video card output connector on the back of your computer

Picture Bounces, Flickers or

Wave Pattern is Present in the

Picture

• Move electrical devices that may cause electrical interference as far away from the monitor as possible

• Use the maximum refresh rate your monitor is capable of at the resolution your are using

Monitor is Stuck in Active Off-

Mode

• The computer Power Switch should be in the ON posiiton

• The computer Video Card should be snugly seated in its slot

• Make sure the monitor’s video cable is properly connected to the computer

• Inspect the monitor’s video cable and make sure none of the pins are bent

Missing one of the primary colors (RED, GREEN or BLUE)

• Inspect the monitor’s video cable and make sure that none of the pins are bent

• Make sure the monitor’s video cable is properly connected to the computer

• Adjust H-Position and V-Position or press hot-key

(AUTO)

Screen image is not centerred or sized properly

Picture has color defects (while does not look white)

Horizontal or Vertical disturbances on the screen

• Adjust RGB color or select color temperature

• Adjust CLOCK and PHASE or perform hot-key

(AUTO-key)

1

Specifications

LCD Panel

Resolution

Physical

Characteristics

Enviromental

Model Number

Driving system

Viewable Image Size

Pixel Pitch

Video

Separate Sync.

Display Color

Dot Clock

Highest preset resolution

Plug & Play

Input Connector

( 3 E$

TFT Color LCD

4 mm diagonal

0.

mm (H) x 0.

mm (V)

R, G, B Analog Interface & Digital

H/V TTL

16.7M Colors

MHz

Horizontal scan range 30 kHz - 83 kHz

Horizontal scan Size (Maximum) 4 mm

Vertical scan range 50 Hz - 75 Hz

Vertical scan Size (Maximum)

Optimal present resolution

23 .

mm

1 x (60 Hz)

1 [ (60 Hz)

VESA DDC2B/CI

D-Sub 15 pin & DVI-D

Interface

Input Video Signal Analog: 0,7 V p-p (standard), 75 OHM,

Positive & DVI-D Digital Interface (TMDS)

Power Source

Power Consumption

Connector Type

Signal Cable Type

100 - 240 VAC, 50/60 Hz

Active < 2 1 W

Power saving < W

15-pin D-Sub & DVI-D

Detachable

Dimensions & Weight:

Height (with base)

Width

Depth

Weight (monitor only)

Weight (with packaging)

Temperature:

Operating

Non-Operating

Humidity:

Operating

Non-Operating

Altitude:

Operating

Non-Operating

PP mm mm

PP

4 .

29 kg

5 .2

9 kg

0° to 40°

-20° to 60°

8�� to 80�� (non-condensing)

5�� to 95�� (non-condensing)

0 ~ 8000 ft

0 ~ 40000 ft

2

EPA ENERGY STAR ®

ENERGY STAR® is a U.S registered mark. As an ENERGY STAR® Partner, our company has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Preset Display Modes

RESOLUTION

640 x 480 @60Hz

640 x 480 @67Hz

640 x 480 @72Hz

640 x 480 @75Hz

720 x 400 @70Hz

800 x 600 @60Hz

800 x 600 @72Hz

800 x 600 @75Hz

1024 x 768 @60Hz

1024 x 768 @70Hz

1024 x 768 @75Hz

1 440 x 900 @60Hz

1 440 x 900 @7 5 Hz

1 600 x 900 @ 60 Hz

Pin Assignments

D-Sub pins

HORIZONTAL

FREQUENCY (kHZ)

31.469

35

37.861

37.5

31.469

37.879

48.077

46.875

48.363

56.476

60.023

55.935

70.635

60

VERTICAL

FREQUENCY (HZ)

59.94

66.667

72.809

75

70.087

60.317

72.188

75

60.004

70.069

75.029

59.887

7 4.984

60

12

13

14

15

8

9

10

11

Pin

Number

1

2

3

4

5

6

7

Signal Cable

Video - Red

Video - Green

Video - Blue

Ground

Detect Cable

GND-R

GND-G

GND-B

+5V

Ground

Ground

DDC-Serial data

H-sync

V-sync

DDC-Serial clock

3

DVI-D pins

Pin No.

1

2

5

6

3

4

7

8

Signal Name

TMDS Data 2-

TMDS Data 2+

TMDS Data 2/4

Shield

TMDS Data 4-

TMDS Data 4+

DDC Clock

DDC Data

N.C.

Pin No.

9

10

11

12

13

14

15

16

Signal Name

TMDS Data 1-

TMDS Data 1+

TMDS Data 1/3

Shield

TMDS Data 3-

TMDS Data 3+

+5V Power

Cable Detect

Hot Plug Detect

Pin No.

17

18

19

20

21

22

23

24

Signal Name

TMDS Data 0-

TMDS Data

0+

TMDS Data

0/5 Shield

TMDS Data 5-

TMDS Data

5+

TMDS Clock

Shield

TMDS Clock

+

TMDS Clock -

Plug and Play

Plug & Play DDCB Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD.

It allows the monitor to inform the host system of its identity and depending on the level of DDC used, communicate additional information about its display capabilities.

The DDC2B is a bidirectional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.

1 4

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Frequently Answers and Questions

What precautions should be taken when using the Lenovo E2001bA monitor?
Handle with care, avoid unstable surfaces, ensure proper ventilation, use the specified power source, connect to a grounded outlet, unplug during storms or extended absence, avoid overloading power strips, don't insert objects into slots, don't attempt self-service, use only with compatible computers, install wall socket nearby and accessible, clean regularly with the provided cloth and avoid harsh cleansers, don't leak liquid into the monitor, and protect the screen from scratches.
How do I adjust the viewing angle of the Lenovo E2001bA monitor?
Hold the stand to prevent toppling, adjust the angle within the specified range (-3°~-7° to 20°~24°), avoid touching the LCD screen during adjustment.
What is the recommended viewing position for the Lenovo E2001bA monitor?
It is recommended to look at the full face of the monitor and adjust the angle to your preference.
How do I connect the Lenovo E2001bA monitor to my computer?
Connect the power cable to the AC port on the monitor, connect a 15-pin D-Sub cable from the monitor to the computer's D-Sub port, or connect a 24-pin DVI cable from the monitor to the computer's DVI port if available.
Can the Lenovo E2001bA monitor be mounted on a wall?
Yes, you can purchase a wall mounting arm separately and follow the manufacturer's instructions to attach it to the back of the monitor.