advertisement
5
6
1
2
3
4
7
8
32
33
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
9
10
11
Public Address System
MP3 Mixer Amplifier
MP60B
MP120B
User’s Manual
Welcome to use the public address system manufactured by DSPPA Company. For the better application of this equipment, please read the operation instruction carefully prior to use.
Guangzhou DSPPA Audio Co., Ltd.
http://www.DSPPA.com
D
1
2
3
Message on Information of Instructions
The instructions contain the introduction to product function, introduction to appearance, technical parameters, schematic diagram of connection, safety precautions, and after-sales service for the broadcasting power amplifier with MP3 /preamplifier in the types of
MP60B/MP120B. It is necessary to read this manual prior to the connection and application.
The functions and relevant technical parameters described in the instructions shall be applicable as of the completion of development of this product. The functions and technical parameters shall be subject to future change without prior notice.
Please preserve the instructions properly for the future use.
Description Of Product
1.1 About MP60B/MP120B broadcasting terminal
MP60B/MP120B is advanced public address equipment integrating MP3 player, preamplifier and post power amplifier.
This equipment has two line signal input interfaces, one line signal output interface, and four routes of the microphone input interfaces, of which the signal from the interface of microphone 1# on the front panel shall be granted the highest priority level.
Integrating the whole set of the broadcasting program as the small-sized public address system including the sound source, partition, preamplifier, post power amplifier and volume control and other functions, this equipment is applicable to the sites needing the public address by the small-sized public broadcasting system.
1.2 Performance characteristics
Combined power amplifier series with MP3, the preamplifier and post power amplifier.
Plugged with U disc and other memory equipment to provide MP3 sound source.
four microphone inputs, two Line inputs, and one Line output for link.
Muting function.
Individual volume control. Bass and treble tone control.
A five-element LED level meter is provided for the quick and easy visual monitoring of sound level.
2 MP60B MP120B
- 1 -
Mixer amplifier
Mixer amplifier
Front Panel
2 3 10 11 12
POWER
ON OFF
1
POWER
2 4 6
OUTPUT
8 10
BASS
TONE
TREBLE
USB VOL
MP3 DISPLAY
AUX2 VOL AUX1 VOL
USB
MIC4 VOL MIC3 VOL MIC2 VOL
MP60B
MIXER AMPLIFIER
MIC1 VOL
MIC1 IN
4 5 6 7 8 9
1. Power switch(power indicator lighting as ON state)
For main power.
2. LED power indicator
For main power.
3. LED level meter
Indicate output level.
4. Bass control
Adjust bass response.
5. Treble control
Adjust treble response.
6. MP3 output volume control
Adjust treble response.
7. Line volume control
Adjust Line input volume.
8. Mic1-Mic4 volume control
Adjust microphone volume.
9. Mic1 input jack
Connect to microphone of unbalanced
30-600Ω with 1/4″phone plug. The muting function is activated while the signal is sent to
Mic1.
10. MP3 Display
11. MP3 USB input jack
12. MP3 Player control button
Note:
When all the five elements (+10dB) of the LED level meter remain lit, it indicates that the sound is distorted. In a such case, adjust each volume controlling knob, until LED element 4
(+8dB) and LED element 5 (+10dB) shall flashing.
- 2 -
Mixer amplifier
Rear Panel
8
MIC 2 MIC 3 MIC 4
AUX1 AUX2 OUT
MUTE
MAX MIN
1 2 3 4
1. Mute control
Adjust muting function.
2. Line 1 input and Line 2 input
Connect to linear source equipment.
3. Line output
Connect a recorder
4. Fan Exhaust Window
5. Speaker output 100V
6. AC fuse
Prevent the excessive AC current flow.
7. AC power Input jack ( ~220V-240V/50-60Hz/6A )
Connected to AC power source.
8.
Mic2-Mic4 input jack
SPEAKER OUTPUT
COM 100V
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
F4AL250V
Nur Sicherung 250V
Use Only With A 250V Fuse
Employer Unlquement Avec
~220V/50~60Hz/6A
5 6 7
Operation Instructions to MP3
plug the U-disc storing MP3 program into USB interface, and the equipment start playing automatically. Make use of the 12 buttons on the panel of the equipment to select the program to be played and to control the suspension of playing.
- 3 -
Mixer amplifier
Muting Function
This equipment provides muting function. The inputs from Mic2-Mic4, Line1, Line 2 are automatically muted by a input from Mic1, as the signal from Mic1 overrides other input signals.
The level of
MUTE can be adjusted within the range
MUTE from MAX to MIN by adjusting MUTE control button on the rear panel. It is preset at MAX before shipping from the factory.
MAX MIN
Precaution Of Installation
1. Do not block ventilation holes.
2. The amplifier should not be placed in any of the areas:
1) with poor ventilation;
2) exposed to direct sunlight;
3) with high ambient temperature or adjacent to heat-generating equipment;
4) with high humidity or heavy dust;
5) susceptible to vibration.
3. Make sure the power outlet conforms to the plug of the unit.
4. Do not use this unit if the electrical power cord is frayed or broken.
5. Always operate the unit with the AC ground wire connected to the electrical system’s ground.
6. If an alarm rings after the power has been on and the signal has been fed, there must be an of output short-circuit trouble. In a such case, please turn the power off. Do not turn on the power again, until the trouble shall be resolved.
- 4 -
Mixer amplifier
Packing List
No.
4
5
6
1
2
3
Specification
5×19 whole machine fixing screw
SY542 wire (AV terminal audio wire)
Instructions
U disc
Certificate
Plastic washer
Specifications
Model
Rated output
Output regulation
Speaker output
AUX output
Input Sensitivity
Frequency response
Distortion
The ratio of signal to noise ratio
Tone
Less than 3dB
MP60B
60W
100V
1V
Mic1,2,3,4 : 3mV( ± 0.5mV) unbalanced
Line 1,2 : 300mV( ± 30mV) unbalanced
65Hz-20kHz ( ± 3dB)
Less than 1% at 1kHz , 1/3 rated output voltage
Mic1 ,2,3,4 : Bigger than 80dB
Line 1 、 2 : Bigger than 80dB
Bass : ± 12dB at 100Hz
Treble : ± 12dB at 10kHz
MP3 Input Sensitivity
Protection
Muting function
230-280mV
AC fuse; DC voltage; overload; short-circuit.
Mic1 overrides other input signals with
0 ~ -30dB attenuation
AC 220-240V/50-60Hz
430 × 300 × 88mm
Power requirements
Dimensions
Power consumption
Gross weight
Net weight
Specifications are subject to change without notice.
90W
9kg
6kg
MP120B
120W
200W
10kg
7kg
Quantity
4
1
1
1
1
4
- 5 -
CAUTION
● When the “Power switcher” is off, please pull out the power cord from the socket.
Please keep the equipment out of water.
● To reduce the risk of electric shock, do not remove the cover.
● No user parts inside. Refer servicing to qualified service personnel.
The symbol on rear panel indicates hazardous live. The connection of these terminals must be operated by the instructed person. The unit connect to the mains by the plug. Pull out the plug when the unit is in fault or danger status. So the socket for the unit plugging must be set in the place can be easy to plug into and pull out the plug.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project