Aeg HK854870XB User Manual

Add to My manuals
20 Pages

advertisement

Aeg HK854870XB User Manual | Manualzz

HK854870XB

USER

MANUAL

EN User Manual

Hob

2 www.aeg.com

CONTENTS

1. SAFETY INFORMATION......................................................................................2

2. SAFETY INSTRUCTIONS.................................................................................... 4

3. INSTALLATION.....................................................................................................6

4. PRODUCT DESCRIPTION...................................................................................8

5. DAILY USE......................................................................................................... 10

6. HINTS AND TIPS................................................................................................14

7. CARE AND CLEANING...................................................................................... 15

8. TROUBLESHOOTING........................................................................................16

9. TECHNICAL DATA............................................................................................. 18

10. ENERGY EFFICIENCY.....................................................................................18

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support

Register your product for better service: www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the

ENGLISH instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safety

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.

Do not let children play with the appliance.

Keep all packaging away from children and dispose of it appropriately.

Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts are hot.

If the appliance has a child safety device, this should be activated.

Children shall not carry out cleaning and user maintenance of the appliance without supervision.

Children aged 3 years and under must be kept away from this appliance when it is in operation at all times.

1.2 General Safety

WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.

Do not operate the appliance by means of an external timer or separate remote-control system.

WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.

NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.

3

4 www.aeg.com

CAUTION: The cooking process has to be supervised.

A short term cooking process has to be supervised continuously.

WARNING: Danger of fire: Do not store items on the cooking surfaces.

Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.

Do not use a steam cleaner to clean the appliance.

If the glass ceramic surface / glass surface is cracked, switch off the appliance to avoid the possibility of electric shock.

If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard.

WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must install this appliance.

WARNING!

Risk of injury or damage to the appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instruction supplied with the appliance.

• Keep the minimum distance from the other appliances and units.

• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to prevent moisture to cause swelling.

• Protect the bottom of the appliance from steam and moisture.

• Do not install the appliance adjacent to a door or under a window. This prevents hot cookware to fall from the appliance when the door or the window is opened.

• If the appliance is installed above drawers make sure that the space, between the bottom of the appliance and the upper drawer, is sufficient for air circulation.

• The bottom of the appliance can get hot. Make sure to install a separation panel made from plywood, kitchen carcass material or other nonflammable materials under the appliance to prevent access to the bottom.

2.2 Electrical Connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections should be made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make sure that the appliance is disconnected from the power supply.

• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.

• Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets

• Do not use multi-plug adapters and extension cables.

• Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised

Service Centre or an electrician to change a damaged mains cable.

• The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.

• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.

• If the mains socket is loose, do not connect the mains plug.

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

ENGLISH 5

• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.

• The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.

2.3 Use

WARNING!

Risk of injury, burns and electrical shock.

• Remove all the packaging, labelling and protective film (if applicable) before first use.

• Use this appliance in a household environment.

• Do not change the specification of this appliance.

• Make sure that the ventilation openings are not blocked.

• Do not let the appliance stay unattended during operation.

• Set the cooking zone to “off” after each use.

• Do not put cutlery or saucepan lids on the cooking zones. They can become hot.

• Do not operate the appliance with wet hands or when it has contact with water.

• Do not use the appliance as a work surface or as a storage surface.

• If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock.

• When you place food into hot oil, it may splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.

• The vapours that very hot oil releases can cause spontaneous combustion.

• Used oil, that can contain food remnants, can cause fire at a lower

6 www.aeg.com

temperature than oil used for the first time.

• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.

WARNING!

Risk of damage to the appliance.

• Do not keep hot cookware on the control panel.

• Do not put a hot pan cover on the glass surface of the hob.

• Do not let cookware to boil dry.

• Be careful not to let objects or cookware fall on the appliance. The surface can be damaged.

• Do not activate the cooking zones with empty cookware or without cookware.

• Do not put aluminium foil on the appliance.

• Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface.

• This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.

2.4 Care and cleaning

• Clean regularly the appliance to prevent the deterioration of the surface material.

• Deactivate the appliance and let it cool down before you clean it.

• Disconnect the appliance from the electrical supply before maintenance.

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Before the installation

Before you install the hob, write down the information bellow from the rating plate.

The rating plate is on the bottom of the hob.

• Do not use water spray and steam to clean the appliance.

• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use any abrasive products, abrasive cleaning pads, solvents or metal objects.

2.5 Service

• To repair the appliance contact the

Authorised Service Centre. Use original spare parts only.

• Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for information on how to discard the appliance correctly.

• Disconnect the appliance from the mains supply.

• Cut off the mains electrical cable close to the appliance and dispose of it.

Serial number ...........................

3.2 Built-in hobs

Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards.

3.3 Connection cable

• The hob is supplied with a connection cable.

• To replace the damaged mains cable, use the cable type: H05V2V2-F which

3.4 Assembly

ENGLISH withstands a temperature of 90°C or higher. Speak to your local Service

Centre.

7 min.

500mm min.

50mm

R 5mm min.

55mm

490

+1 mm

750 +1 mm min.

28 mm min.

20 mm min.

12 mm

8 www.aeg.com

3.5 Protection box If you use a protection box (an additional accessory), the protective floor directly below the hob is not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier.

You can not use the protection box if you install the hob above an oven.

4. PRODUCT DESCRIPTION

4.1 Cooking surface layout

1 1

145 mm

1 Cooking zone

2 Control panel

180 mm

1 2 1

4.2 Control panel layout

1 2 3 4 5 6 7 8 9

13 12 11 10

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.

ENGLISH 9

9

10

1

2

3

4 -

5

-

6 -

7

8

Sen‐ sor field

11

/

Function Comment

-

-

ON / OFF

Lock / The Child Safety

Device

STOP+GO

To activate and deactivate the hob.

To lock / unlock the control panel.

-

To activate and deactivate the function.

Heat setting display

Timer indicators of cooking zones

-

Timer display

To show the heat setting.

To show for which zone you set the time.

To show the time in minutes.

To activate and deactivate the outer ring.

To activate and deactivate the outer ring.

Hob²Hood To activate and deactivate the manual mode of the function.

To select the cooking zone.

To increase or decrease the time.

12

13 -

Automatic Heat Up

Control bar

4.3 Heat setting displays

Display

-

+ digit

/ /

To activate and deactivate the function.

To set a heat setting.

Description

The cooking zone is deactivated.

The cooking zone operates.

STOP+GO function operates.

Automatic Heat Up function operates.

There is a malfunction.

OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / residual heat.

Lock / The Child Safety Device function operates.

10 www.aeg.com

Display Description

Automatic Switch Off function operates.

4.4 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ / There is a risk of burns from residual heat.

The indicator shows the level of the residual heat.

5. DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Activating and deactivating

Touch for 1 second to activate or deactivate the hob.

5.2 Automatic Switch Off

The function deactivates the hob automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you activate the hob,

• you spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel.

• you do not deactivate a cooking zone or change the heat setting. After some time comes on and the hob deactivates.

The relation between the heat setting and the time after which the hob deactivates:

Heat setting

, 1 - 3

4 - 7

The hob deacti‐ vates after

6 hours

5 hours

Heat setting

8 - 9

10 - 14

The hob deacti‐ vates after

4 hours

1.5 hour

5.3 The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat setting or move your finger along the control bar until you reach the correct heat setting.

5.4 Activating and deactivating the outer rings

You can adjust the surface you cook to the dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the sensor field. The indicator comes on.

To activate more outer rings: touch the same sensor field again. The subsequent indicator comes on.

To deactivate the outer ring: touch the sensor field until the indicator goes out.

When you activate the zone but do not activate the outer ring the light that comes out from the zone may cover the outer ring. It does not mean that the outer ring is activated. To see if the ring is activated check the indicator.

5.5 Automatic Heat Up

Activate this function to get a desired heat setting in a shorter time. When it is on, the zone operates on the highest setting in the beginning and then continues to cook at the desired heating setting.

To activate the function the cooking zone must be cold.

To activate the function for a cooking

zone: touch ( comes on).

Immediately touch a desired heat setting.

After 3 seconds comes on.

To deactivate the function: change the heat setting.

5.6 Timer

Count Down Timer

You can use this function to set how long the cooking zone should operate for a single cooking session.

First set the heat setting for the cooking zone then set the function.

To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on.

To activate the function: touch of the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash slowly the time counts down.

To see the remaining time: set the cooking zone with . The indicator of the cooking zone starts to flash quickly.

The display shows the remaining time.

To change the time: set the cooking zone with . Touch or .

ENGLISH 11

To deactivate the function: set the cooking zone with and touch . The remaining time counts back to 00. The indicator of the cooking zone goes out.

When the time comes to an end, the sound operates and

00 flashes. The cooking zone deactivates.

To stop the sound: touch .

CountUp Timer (The count up timer)

You can use this function to monitor how long the cooking zone operates.

To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on.

To activate the function: touch of the timer. comes on. When the indicator of the cooking zone starts to flash slowly the time counts up. The display switches between and counted time (minutes).

To see how long the cooking zone

operates: set the cooking zone with .

The indicator of the cooking zone starts to flash quickly. The display shows how long the zone operates.

To deactivate the function: set the cooking zone with and touch or

. The indicator of the cooking zone goes out.

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and the cooking zones do not operate. The heat setting display shows .

To activate the function: touch .

Touch or of the timer to set the time. When the time comes to an end, the sound operates and 00 flashes.

To stop the sound: touch .

The function has no effect on the operation of the cooking zones.

12 www.aeg.com

5.7 STOP+GO

This function sets all cooking zones that operate to the lowest heat setting.

When the function operates, you cannot change the heat setting.

The function does not stop the timer functions.

To activate the function: touch . comes on.

To deactivate the function: touch .

The previous heat setting comes on.

5.8 Lock

You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting.

Set the heat setting first.

To activate the function: touch . comes on for 4 seconds. The Timer stays on.

To deactivate the function: touch .

The previous heat setting comes on.

When you deactivate the hob, you also deactivate this function.

5.9 The Child Safety Device

This function prevents an accidental operation of the hob.

To activate the function: activate the hob with . Do not set the heat setting.

Touch for 4 seconds. comes on.

Deactivate the hob with .

To deactivate the function: activate the hob with . Do not set the heat setting.

Touch for 4 seconds. comes on.

Deactivate the hob with .

To override the function for only one

cooking time: activate the hob with .

comes on. Touch for 4 seconds.

Set the heat setting in 10 seconds.

You can operate the hob. When you deactivate the hob with the function operates again.

5.10 OffSound Control

(Deactivating and activating the sounds)

Deactivate the hob. Touch for 3 seconds. The display comes on and goes out. Touch for 3 seconds. or

comes on. Touch of the timer to choose one of the following:

• - the sounds are off

• - the sounds are on

To confirm your selection wait until the hob deactivates automatically.

When the function is set to you can hear the sounds only when:

• you touch

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control panel.

5.11 Power management

• Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration.

• Each phase has a maximum electricity loading of 3700 W.

• The function divides the power between cooking zones connected to the same phase.

• The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3700 W.

• The function decreases the power to the other cooking zones connected to the same phase.

• The heat setting display of the reduced zones alternates between the chosen heat setting and the reduced heat setting. After some time the heat setting display of the reduced zones stays on the reduced heat setting.

ENGLISH 13

5.12 Hob²Hood

It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infra — red signal communicator.

Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually.

For most of the hoods the remote system is originally deactivated. Activate it before you use the function.

For more information refer to hood user manual.

Operating the function automatically

To operate the function automatically set the automatic mode to H1 – H6. The hood reacts whenever you operate the hob. The hob recognizes temperature of the cookware automatically and adjusts the speed of the fan.

Automatic modes

Boil‐ ing 1)

Frying 2) Auto‐ matic light

Mode H0 Off

Mode H1 On

Mode

H2 3)

On

Mode H3 On

Off

Off

Fan speed 1

Off

Off

Off

Fan speed 1

Fan speed 1

Auto‐ matic light

Mode H4 On

Boil‐ ing 1)

Frying 2)

Mode H5 On

Fan speed 1

Fan speed 1

Fan speed 1

Fan speed 2

Mode H6 On Fan speed 2

Fan speed 3

1) The hob detects the boiling process and acti‐ vates fan speed in accordance with automatic mode.

2) The hob detects the frying process and acti‐ vates fan speed in accordance with automatic mode.

3) This mode activates the fan and the light and does not rely on the temperature.

Changing the automatic mode

1. Deactivate the appliance.

2. Touch for 3 seconds. The display comes on and goes off

3. Touch for 3 seconds.

4. Touch a few times until comes on.

5. Touch of the Timer to select an automatic mode.

To operate the hood directly on the hood panel deactivate the automatic mode of the function.

When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After that time the system deactivates the fan automatically and prevents you from accidental activation of the fan for the next 30 seconds.

Operating the fan speed manually

You can also operate the function manually. To do that touch when the hob is active. This deactivates automatic operation of the function and allows you to change the fan speed manually. When

14 www.aeg.com

you press you raise the fan speed by one. When you reach an intensive level and press again you will set fan speed to 0 which deactivates the hood fan. To start the fan again with fan speed

1 touch .

To activate automatic operation of the function, deactivate the hob and activate it again.

6. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

6.1 Cookware

The bottom of the cookware must be as thick and flat as possible.

Cookware made of enamelled steel and with aluminium or copper bottoms can cause the colour change on the glassceramic surface.

Activating the light

You can set the hob to activate the light automatically whenever you activate the hob. To do so set the automatic mode to

H1 – H6.

The light on the hood deactivates 2 minutes after deactivating the hob.

6.2 Öko Timer (Eco Timer)

To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation.

6.3 Examples of cooking applications

The data in the table is for guidance only.

Heat setting

- 1

1 - 3

1 - 3

3 - 5

5 - 7

7 - 9

Use to:

Keep cooked food warm.

Time

(min) as nec‐ essary

5 - 25

Hints

Put a lid on the cookware.

Hollandaise sauce, melt: but‐ ter, chocolate, gelatine.

Mix from time to time.

Solidify: fluffy omelettes, baked eggs.

Simmer rice and milkbased dishes, heating up readycooked meals.

10 - 40 Cook with a lid on.

25 - 50 Add the minimum twice as much liquid as rice, mix milk dishes part procedure through.

Steam vegetables, fish, meat.

20 - 45 Add some tablespoons of liq‐ uid.

Steam potatoes.

20 - 60 Use max. ¼ l water for 750 g of potatoes.

ENGLISH 15

Heat setting

7 - 9

9 - 12

12 - 13

14

Use to:

Cook larger quantities of food, stews and soups.

Gentle fry: escalope, veal cor‐ don bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts.

Time

(min) as nec‐ essary

Hints

60 - 150 Up to 3 l liquid plus ingredi‐ ents.

Turn halfway through.

Heavy fry, hash browns, loin steaks, steaks.

5 - 15 Turn halfway through.

Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

6.4 Hints and Tips for

Hob²Hood function

When you operate the hob with the function:

• Protect the hood panel from direct sunlight.

• Do not spot halogen light on the hood panel.

• Do not cover the hob panel.

• Do not interrupt the signal between the hob and the hood (for example with a hand or a cookware handle).

See the picture.

Hood in the picture is only exemplary.

It may happen that other remote controlled appliances may block the signal. To avoid it do not operate the remote of the appliance and the hob at the same time.

Cooker hoods with the Hob²Hood function

To find the full range of cooker hoods which work with this function refer to our consumer website. The AEG cooker hoods that work with this function must have the symbol .

7. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

7.1 General information

• Clean the hob after each use.

• Always use cookware with clean bottom.

16 www.aeg.com

• Scratches or dark stains on the surface have no effect on how the hob operates.

• Use a special cleaner applicable for the surface of the hob.

• Use a special scraper for the glass.

7.2 Cleaning the hob

Remove immediately: melted plastic, plastic foil, sugar and food with sugar.

If not, the dirt can cause damage to the hob. Take care to avoid burns. Put the special scraper on the glass

8. TROUBLESHOOTING

surface at an acute angle and move the blade on the surface.

Remove when the hob is

sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth.

Remove shiny metallic

discoloration: use a solution of water with vinegar and clean the glass surface with a moist cloth.

WARNING!

Refer to Safety chapters.

8.1 What to do if...

Problem

You cannot activate or oper‐ ate the hob.

An acoustic signal sounds and the hob deactivates.

An acoustic signal sounds when the hob is deactivated.

Possible cause

The hob is not connected to an electrical supply or it is connected incorrectly.

The fuse is blown.

Remedy

Check if the hob is correctly connected to the electrical supply. Refer to the connec‐ tion diagram.

Make sure that the fuse is the cause of the malfunction.

If the fuse is blown again and again, contact a quali‐ fied electrician.

Activate the hob again and set the heat setting in less than 10 seconds.

Touch only one sensor field.

You touched 2 or more sen‐ sor fields at the same time.

STOP+GO function oper‐ ates.

There is water or fat stains on the control panel.

You put something on one or more sensor fields.

Refer to "Daily use" chapter.

Clean the control panel.

Remove the object from the sensor fields.

ENGLISH 17

Problem

The hob deactivates.

Residual heat indicator does not come on.

Hob²Hood function does not work.

Automatic Heat Up function does not operate.

You cannot activate the out‐ er ring.

Possible cause

You put something on the sensor field .

The zone is not hot because it operated only for a short time.

Remedy

Remove the object from the sensor field.

If the zone operated suffi‐ ciently long to be hot, speak to an Authorised Service

Centre.

You covered the control pan‐ el.

The zone is hot.

The highest heat setting is set.

Remove the object from the control panel.

Let the zone become suffi‐ ciently cool.

The highest heat setting has the same power as the func‐ tion.

Activate the inner ring first.

It is normal that there is a dark area on the multiple zone.

There is a dark area on the multiple zone.

The heat setting changes between two levels.

The sensor fields become hot.

There is no signal when you touch the panel sensor fields.

Power management function operates.

The cookware is too large or you put it too near to the controls.

Refer to "Daily use" chapter.

Put large cookware on the rear zones if possible.

The signals are deactivated. Activate the signals.

Refer to "Daily use" chapter.

comes on.

comes on.

and a number come on.

Automatic Switch Off oper‐ ates.

The Child Safety Device or the Lock function operates.

Deactivate the hob and acti‐ vate it again.

Refer to "Daily use" chapter.

There is an error in the hob. Disconnect the hob from the electrical supply for some time. Disconnect the fuse from the electrical system of the house. Connect it again.

If comes on again, speak to an Authorised Service

Centre.

18 www.aeg.com

Problem

E6 comes on.

8.2 If you cannot find a solution...

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass

9. TECHNICAL DATA

9.1 Rating plate

Possible cause

The second phase of the power supply is missing.

Remedy

Check if the hob is correctly connected to the electrical supply. Remove the fuse, wait one minute, and insert the fuse again.

surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the

Service Centre and conditions of guarantee are in the guarantee booklet.

Model HK854870XB

Typ 60 HBD R2 AO

Ser.Nr. .................

AEG

PNC 949 597 109 01

220 - 240 V 50 - 60 Hz

Made in Germany

7.7 kW

9.2 Cooking zones specification

Cooking zone

Left front

Left rear

Middle front

Right front

Nominal Power (Max heat set‐ ting) [W]

2000

1600

1100 / 2300 / 3400

1800 / 2800

Cooking zone diameter [mm]

180

145

145 / 210 / 270

170 / 265

For optimal cooking results use cookware not larger than the diameter of the cooking zone.

10. ENERGY EFFICIENCY

10.1 Product information according to EU 66/2014

Model identification HK854870XB

ENGLISH 19

Type of hob

Lenght (L) and width (W) of non circular cooking zone

Energy consumption per cooking zone (EC electric cooking)

Number of cooking zones

Heating technology

Diameter of circular cook‐ ing zones (Ø)

Left front

Left rear

Middle front

Right front

Energy consumption of the hob (EC electric hob)

Left front

Left rear

Middle front

Right front

Built-In Hob

4

Radiant Heater

18.0 cm

14.5 cm

27.0 cm

L 26.5 cm

W 17.0 cm

185.5 Wh / kg

190.4 Wh / kg

186.1 Wh / kg

185.5 Wh / kg

186.9 Wh / kg

EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance

10.2 Energy saving

You can save energy during everyday cooking if you follow below hints.

• When you heat up water, use only the amount you need.

• If it is possible, always put the lids on the cookware.

11. ENVIRONMENTAL CONCERNS

• Before you activate the cooking zone put the cookware on it.

• The cookware bottom should have the same diameter as the cooking zone.

• Put the smaller cookware on the smaller cooking zones.

• Put the cookware directly in the centre of the cooking zone.

• Use the residual heat to keep the food warm or to melt it.

Recycle materials with the symbol .

Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

*

www.aeg.com/shop

advertisement

Related manuals

Download PDF

advertisement