Sony BDV-E4100 Quick guide

Blu-ray Disc™/DVD Home Theatre System
GB
Start here
Quick start guide
BDV-E6100
BDV-E4100
BDV-E3100
BDV-E2100
BDV-E6100
BDV-E4100
BDV-E3100
BDV-E2100
1
2
What’s in the box/Setting up the speakers
BDV-E6100



Connecting your TV

4
5


BDV-E4100


3

Connecting other devices

The on-screen Easy Setup




BDV-E3100

 

 

 

Playback and using other functions
BDV-E2100
 



Main unit
What’s in the box
 Front speakers
 Surround speakers
 Center speaker
 Subwoofer
Remote
Speaker-bottom covers
(BDV-E6100 (4) /BDV-E4100 (2))
Screws (large)
(BDV-E6100 (4) /BDV-E4100 (2))
R6 (size AA) batteries (2)
FM wire antenna (aerial)
Screws (small)
(BDV-E6100 (16) /BDV-E4100 (8))
03
1
Start by positioning the speakers
according to the labels on the
rear panel. 
You can also set the speakers
in ALL FRONT  position. For
further details, visit:
http://support.sony-europe.com/

SUBWOOFER
SUR L
FRONT L
FRONT R
SUR R

SUBWOOFER
FRONT L
FRONT R
CENTER
Main unit
CENTER
SUR L
04
SUR R
Main unit
Next, connect the speakers to the
main unit.
For BDV-E6100/BDV-E4100,
refer to the supplied “Speaker
Installation Guide” for assembling
the speakers.
05
2
To enjoy high-quality video and
audio, connect via a High Speed
HDMI cable  (not supplied).
If your TV has no HDMI ARC jack,
you also need an optical digital
cord  (not supplied) to enjoy
TV sound through the system
speakers.


06
3
To connect your set-top box, game
console, or digital satellite receiver,
make an audio connection to the
main unit with an optical digital
cord  (not supplied). Separately,
make a video connection to the
TV.
For FM radio, connect the supplied
wire antenna (aerial) and extend it
for the best reception. 


07
3
You can connect to the Internet
and home network via a wireless
LAN or LAN cable  (not
supplied).
Network settings can be found in
the home menu (page 12).
For further details, visit:
http://support.sony-europe.com/
Connect the AC power cord
(mains lead)  to a wall outlet
(mains).


08
To a broadband router
4
Press / to turn the system on.
“SETUP” appears in the front
panel display.
To ready the system for use,
go through the on-screen Easy
Initial Settings using the supplied
remote. This should only take a
few minutes.
Once [Easy Initial Settings are
complete.] appears on the
screen, select [Finish] and the
system is ready to use.
If the setup screen is not
displayed, select the correct AV
input in your TV.
/
///,
09
5
To play a disc, press , then place
the disc on the disc tray. Press 
again to close the disc tray.
If playback does not start
automatically, select in the
[Video], [Music], or [Photo]
category, and press .

10

 pressing the BLUETOOTH
button, or
 using the NFC function (for
NFC compatible devices only).
Download the application and
simply hold your device near to
the N mark on the main unit. For
further details, visit:
http://support.sony-europe.com/
You can enjoy music on your
smartphone, etc., via Bluetooth
communication from your
system.
You can pair/connect your
Bluetooth device by either:


BLUETOOTH
11
To access more features, simply press
HOME.
Examples:
 Listen to the radio through the system’s
speakers
 Preset radio stations
 Access Internet content
 Play files on the connected USB device









ou can make network
Y
settings via this menu
when the main unit
is connected to a
broadband router.
HOME
12
Presetting radio stations
1 Press FUNCTION repeatedly
until “FM” appears in the front
panel display.
2 Press and hold TUNING +/–
until auto scanning starts.
3 Press OPTIONS.
4 Press / to select [Preset
Memory], then press .
5 Press / to select the preset
number you want, then press
.
6 Repeat Steps 2 to 5 to store
other stations.
Selecting a preset station
1 Press FUNCTION repeatedly
until “FM” appears in the front
panel display.
2 Press PRESET +/– repeatedly to
FUNCTION
///,
OPTIONS
HOME
PRESET +/–
select the preset station.
TUNING +/–
13
Troubleshooting
If you experience any of the following difficulties while using
the system, use this troubleshooting guide to help remedy the
problem before requesting repairs.
Also consult the Operating Instructions on the following website:
http://support.sony-europe.com/
The power does not turn on.
‚‚Check that the AC power cord (mains lead) is securely
connected to the wall outlet (mains).
The system does not work normally.
‚‚Disconnect the AC power cord (mains lead) from the wall
outlet (mains), then reconnect after several minutes.
The system does not output sound of the TV program when
connected to a set-top box.
‚‚Check the connections.
‚‚Select the correct input of the system to which the set-top box
is connected.
A disc does not play.
‚‚The region code of the disc does not match the system.
‚‚Moisture has condensed on the lenses inside the main unit.
Remove the disc and leave the main unit turned on for about
half an hour.
‚‚The disc is not correctly finalized.
Reducing power usage to less than 0.3 W in
Standby Mode
Press HOME, and then press /// to select [Setup]. Check that
the following settings are made:
ˎˎ Select [System Settings] > [HDMI Settings] > [Control for HDMI],
then set [Control for HDMI] to [Off ].
ˎˎ Select [System Settings] > [Quick Start Mode], then set [Quick
Start Mode] to [Off ].
ˎˎ Select [Network Settings] > [Remote Start], then set [Remote
Start] to [Off ].
14
15
This quick start guide saves paper
To save natural resources, Sony has drastically reduced paper by no longer including full
printed manuals. However, full operating instructions, and more, can be found online:
http://support.sony-europe.com/
4-446-740-12(1)
2013 Sony Corporation
Printed in Malaysia

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project