Panasonic DMPBDT280GH Operating instructions

Add to my manuals
39 Pages

advertisement

Panasonic DMPBDT280GH Operating instructions | Manualzz

DMP-BDT280&180_EBGNGAGH-SQW0349.book 1 ページ 2020年4月13日 月曜日 午後4時23分

Operating Instructions

Blu-ray Disc

TM

Player

Model No. DMP-BDT280

DMP-BDT180

DMP-BDT167

DMP-BD84

Unless otherwise indicated, illustrations in these operating instructions are of DMP-BDT280.

Firmware updates

Panasonic is constantly improving the unit’s firmware to ensure that our customers are enjoying the latest technology.

Panasonic recommends updating your firmware as soon as you are notified.

For details, refer to “Firmware updates” ( > 15) or

http://panasonic.jp/support/global/cs/ (This site is in English only.)

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Model number suffix “EB”, “B” denotes UK model.

SQW0628-2 EB B GN GA GH until

2014/4/14

DMP-BDT280&180_EBGNGAGH-SQW0349.book 2 ページ 2020年4月13日 月曜日 午後4時23分

Precautions

WARNING

Unit

To reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or splashing.

≥ Do not place objects filled with liquids, such as vases, on this unit.

≥ Use only the recommended accessories.

≥ Do not remove covers.

≥ Do not repair this unit by yourself. Refer servicing to qualified service personnel.

≥ Do not let metal objects fall inside this unit.

≥ Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,

≥ Ensure that the power supply voltage corresponds to the voltage printed on this unit.

≥ Insert the mains plug fully into the socket outlet.

≥ Do not pull, bend, or place heavy items on the lead.

≥ Do not handle the plug with wet hands.

≥ Hold onto the mains plug body when disconnecting the plug.

≥ Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from the socket outlet immediately.

Batteries

Mishandling of batteries can cause electrolyte leakage and may cause a fire.

≥ Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.

≥ When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

≥ Do not mix old and new batteries or different types at the same time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

≥ Do not take apart or short circuit.

≥ Do not recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark place.

[BDT167] [BD84]

AC adaptor

The AC adaptor operates on AC between 110 V and 240 V.

But obtain a suitable plug adaptor if the plug does not fit the AC mains socket.

CAUTION

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted candles, on this unit.

≥ This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

[For_the_United_Kingdom,_Ireland,_HongKong,_Australia_and_New_Zealand]

≥ This unit is intended for use in moderate climates.

[For_the_South_East_Asia]

≥ This unit is intended for use in tropical climates.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,

≥ Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.

≥ Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.

≥ Do not place the unit on amplifiers/receivers or equipment that may become hot. The heat can damage the unit.

≥ Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration.

Caution for AC Mains Lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained.

A replacement fuse cover can be purchased from your local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A Figure B

Fuse cover

2. Replace the fuse and close or attach the fuse cover.

Figure A

Fuse

(5 ampere)

Figure B

Fuse

(5 ampere)

- 2 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 3 ページ 2020年4月13日 月曜日 午後4時23分

Restriction on use of unauthorized copied content

This unit adopts the following technology for copyright protection.

Cinavia Notice

This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.

More information about Cinavia technology is provided at the

Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about

Cinavia by mail, send a postcard with your mailing address to:

Cinavia Consumer Information Center, P.O. Box 86851, San

Diego, CA, 92138, USA.

[BDT280]

Wireless LAN connection

The following limits are in place regarding the usage of this unit.

You must be aware of these limits before using this unit.

Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this unit.

≥ Data transmitted and received over radio waves may be intercepted and monitored.

≥ This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and follow the following points:

– Do not expose this unit to high temperatures or direct sunlight.

– Do not bend, or subject this unit to strong impacts.

– Keep this unit away from moisture.

– Do not disassemble or alter this unit in any way.

To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete

the user settings. ( > 30, “To return all settings to the factory preset.”)

≥ The operation history may be recorded in the memory of this unit.

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment.

For more information about collection and recycling, please contact your local municipality.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

[For_the_United_Kingdom_and_Ireland]

Declaration of Conformity (DoC)

Hereby, “ Panasonic Corporation ” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to our

R&TTE products from our DoC server: http://www.doc.panasonic.de

Contact to Authorised Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

This product is in compliance with the radio standards of the following countries.

Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,

Finland, France, Germany, Greece, Hungary, Ireland, Italy,

Iceland, Liechtenstein, Luxembourg, Malta, Netherlands,

Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, United Kingdom, Switzerland

This product on purpose to connect to access point of 2.4 GHz

WLAN.

- 3 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 4 ページ 2020年4月13日 月曜日 午後4時23分

Table of contents

Precautions . . . . . . . . . . . . . . . . . 2

Getting started

Playback

Accessories . . . . . . . . . . . . . . . . . 5

Unit and media care . . . . . . . . . . . 6

Playable media. . . . . . . . . . . . . . . 7

Control reference guide . . . . . . . . 9

Connections and settings

Inserting or removing media . . . . 15

HOME menu . . . . . . . . . . . . . . . . 16

Playback . . . . . . . . . . . . . . . . . . . 17

Enjoying Network Service . . . . . . 19

Home Network feature . . . . . . . . 20

“HDMI CEC” . . . . . . . . . . . . . . . . 22

USB Sharing . . . . . . . . . . . . . . . . 22

Connecting to a TV . . . . . . . . . . 11

Connecting to an amplifier/ receiver. . . . . . . . . . . . . . . . . . . 12

Connecting to the network . . . . . 13

Settings . . . . . . . . . . . . . . . . . . . 14

Settings

Option menu . . . . . . . . . . . . . . . . 23

Setup menu. . . . . . . . . . . . . . . . . 24

Reference

Troubleshooting guide . . . . . . . . 30

Specifications . . . . . . . . . . . . . . . 34

- 4 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 5 ページ 2020年4月13日 月曜日 午後4時23分

Check the supplied accessories before using this unit.

1 Remote control

[BDT280]

[For_the_United_Kingdom_and_Ireland]

(N2QAYB001031)

[For_Australia_and_New_Zealand]

(N2QAYB000962)

[BDT180]

[For_the_United_Kingdom_and_Ireland]

[For_Australia_and_New_Zealand]

(N2QAYB001030)

[For_the_South_East_Asia_and_HongKong]

(N2QAYB001033)

[BDT167] [BD84]

[For_the_United_Kingdom_and_Ireland]

[For_Australia_and_New_Zealand]

(N2QAYB001029)

[For_the_South_East_Asia_and_HongKong]

(N2QAYB000958)

2 Batteries for remote control

[BDT280] [BDT180]

AC mains lead

[For_the_United_Kingdom_and_Ireland]

(K2CT2CA00007)

[For_Australia_and_New_Zealand]

(K2CJ2DA00014)

[For_the_South_East_Asia_and_HongKong] *

[BDT167] [BD84]

1 AC adaptor

[For_the_United_Kingdom_and_Ireland,_and_HongKong]

(SAE0003)

[For_Australia_and_New_Zealand]

(SAE0004)

[For_the_South_East_Asia]

(SAE0002)

[Except_the_United_Kingdom_and_Ireland]

1 HDMI Cable

Getting started

Using the remote control

Insert the batteries to the terminal so that it ( i and j ) matches those in the remote control.

R6/LR6, AA

(Alkaline or manganese batteries)

Point it at the remote control signal sensor on this

unit. ( > 9)

≥ Product numbers are provided in these operating instructions correct as of December 2015. These may be subject to change.

≥ Do not use AC mains lead and AC adaptor with other equipment.

≥ Do not use any other AC mains lead and AC adaptors except the supplied one.

* See page 11 for more information.

- 5 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 6 ページ 2020年4月13日 月曜日 午後4時23分

Getting started

Unit and media care

Clean this unit with a soft, dry cloth

≥ Never use alcohol, paint thinner or benzine to clean this unit.

≥ Before using chemically treated cloth, carefully read the instructions that came with the cloth.

This unit’s lens

Use the lens cleaner (not supplied) to clean the unit’s lens.

Clean discs

DO DO NOT

Wipe with a damp cloth and then wipe dry with a dry cloth.

Disc handling precautions

≥ Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use disc cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed stickers or labels (rented discs, etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart shapes.

- 6 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 7 ページ 2020年4月13日 月曜日 午後4時23分

Getting started

Playable media

Device Media markings Device types

BD-Video

BD

BD-RE

BD-R

Contents format

Video

Video,

JPEG, MPO*,

AAC, ALAC, DSD,

FLAC, MP3, WAV,

WMA

Video, MKV, Xvid,

AAC, ALAC, DSD,

FLAC, MP3, WAV,

WMA

DVD-Video Video

DVD

DVD-R

DVD-R DL

Video, AVCHD, MKV,

Xvid,

JPEG, MPO*,

AAC, ALAC, DSD,

FLAC, MP3, WAV,

WMA

DVD-RW

Video, AVCHD

— +R/+RW/+R DL

Music CD Music [CD-DA]

CD

CD-R

CD-RW

MKV, Xvid,

JPEG, MPO*,

AAC, ALAC, FLAC,

MP3, Music [CD-DA],

WAV, WMA

USB —

USB devices

(up to 4 TB)

MKV, MP4, MPEG2,

Xvid,

JPEG, MPO*,

AAC, ALAC, DSD,

FLAC, MP3, WAV,

WMA

* [BDT280] [BDT180] [BDT167] only

See pages 8 and 34 for more information on the types of content that can be played.

- 7 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 8 ページ 2020年4月13日 月曜日 午後4時23分

Types of discs that cannot be played by this unit

Any other disc that is not specifically supported or previously described.

≥ DVD-RAM

≥ Super Audio CD

≥ Photo CD

≥ DVD-Audio

≥ Video CD and Super Video CD

≥ HD DVD

Region management information

The unit can play back BD-Video/DVD-Video discs of the following regions codes, including

“ ALL ”:

Example: BD-Video DVD-Video

[For_the_United_Kingdom_and_Ireland]

[For_Australia_and_New_Zealand]

2

Getting started

Music CD

Operation and sound quality of CDs that do not comply with CD-DA specifications (copy control

CDs, etc.) cannot be guaranteed to work.

USB device

≥ This unit does not guarantee connection with all

USB devices.

≥ This unit does not support USB device charging.

≥ FAT12, FAT16, FAT32, and NTFS file systems are supported.

≥ This unit supports USB2.0 High Speed.

≥ This unit supports an HDD formatted in FAT32 and NTFS. If the HDD is not recognized, the power to the HDD may not be supplied. Supply power from an external source.

BD-RE, BD-R

Discs recorded in DR mode using Panasonic

Blu-ray Disc recorders may not play back the audio etc., correctly.

4

[For_the_South_East_Asia_and_HongKong]

3

≥ It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method, and how the files were created.

≥ The producers of the disc can control how discs are played, so you may not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully.

Finalize

Any DVD-R/RW/R DL, +R/+RW/+R DL and

CD-R/RW that are recorded by a recorder need to be finalized by the recorder to play on this unit.

Please refer to the recorder’s instructions.

BD-Video

≥ This unit supports high bit rate audio (Dolby ®

Digital Plus, Dolby ® TrueHD, DTS-HD High

Resolution Audio TM and DTS-HD Master

Audio TM ) adopted in BD-Video.

≥ If “Dolby D/Dolby D +/Dolby TrueHD” is set to

“PCM” and “DTS Neo:6” is set to “Off”, the maximum possible number of Dolby ® sound is

2ch PCM. ( >

25, 26)

[BDT280] [BDT180] [BDT167]

3D

≥ 3D videos and 3D still pictures can be played back when this unit is connected to a 3D compatible TV using a High Speed HDMI

Cable.

≥ [BDT280] [BDT180] 2D video can be enjoyed as 3D

virtually. ( > 24)

- 8 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 9 ページ 2020年4月13日 月曜日 午後4時23分

3

4

5

6

Getting started

Control reference guide

When other Panasonic devices respond to the remote control of the unit, change the remote control

code. ( > 29)

e.g., [For_the_United_Kingdom_and_Ireland]

[For_Australia_and_New_Zealand] e.g., [For_the_South_East_Asia_and_HongKong]

11

11

1

2

1

2

ㄈㄉㄊ pqrs abc jkl tuv

ㄅㄆㄇ mno wxyz

12

13

[BDT180]

[BDT167]

[BD84]

14

15

3

4

5

6

ㄈㄉㄊ pqrs abc jkl tuv

ㄅㄆㄇ mno wxyz

12

[BDT180]

[BD84]

13

14

15

7

8

9

10

16

17

18

19

20

7

8

9

10

16

17

18

19

20

[BDT280]

[BDT180]

[BDT167] [BD84]

21

21

- 9 -

25 26 27 28

22 23 24

24 23 22

25 28

DMP-BDT280&180_EBGNGAGH-SQW0349.book 10 ページ 2020年4月13日 月曜日 午後4時23分

Getting started

1 Turn the unit on and off

2 TV operation buttons

You can operate the Panasonic TV using this unit’s remote control. Some buttons may not work depending on the TV.

[ Í TV] : Turn the TV on and off

[AV] : Change input

[ i j VOL] : Adjust the volume

3 Select title numbers, etc./Enter numbers or

[BDT280] [BDT180] characters

4 Cancel

5

Change soundtrack ( > 17)

6

Basic playback control buttons ( > 17)

7 [For_the_United_Kingdom_and_Ireland]

[For_Australia_and_New_Zealand]

Show Pop-up menu ( > 17)

[For_the_South_East_Asia_and_HongKong]

Show USB Sharing menu ( > 22)

8

Show Top menu ( > 17)

9

Show Option menu ( > 23)

10 Coloured buttons (red, green, yellow, blue)

Used for various purposes depending on the display

11 Transmit the remote control signal

12 Open or close the disc tray ( > 15)

13 Show the status messages ( > 18)

14 [BDT280]

Show Miracast TM

screen ( > 20)

[BDT180] [BDT167] [BD84]

Switch Secondary Video on/off

(Picture-in-picture) ( > 23)

15 Show the Home Screen of the Network

Service ( > 19)

16 Exit the Menu screen

17 [For_the_United_Kingdom_and_Ireland]

[For_Australia_and_New_Zealand]

Show Netflix screen ( > 19)

[For_the_South_East_Asia_and_HongKong]

Show Pop-up menu ( > 17)

18 Show HOME menu ( > 16)

19 [ 3 , 4 , 2 , 1 ] : Move the highlight for selection

[OK] : Confirm the selection

( ;1

) : Frame-by-frame ( > 17)

20 Return to previous screen

21 Disc tray ( > 15)

22 USB port ( > 15)

23 POWER LED

The LED lights when the unit is turned on, and flashes when error occurs.

24 Remote control signal sensor

Distance: Within approx. 7 m

Angle: Approx. 20 e up and down, 30 e left and right

25 Open or close the disc tray ( > 15)

26 [BDT280] [BDT180]

Stop ( > 17)

27 [BDT280] [BDT180]

Start play ( > 17)

28 Standby/on switch ( Í /I )

( > 14)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

Rear panel terminals ( > 11–13)

Available keys for HDMI CEC ( > 22)

3 Number keys

6 Basic playback control buttons

9 Option button

10 Coloured buttons (red, green, yellow, blue)

16 Exit button

19 [ 3 , 4 , 2 , 1 ]/[OK] button

20 Return button

- 10 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 11 ページ 2020年4月13日 月曜日 午後4時23分

Connections and settings

Connections and settings

Connecting to a TV

Connect the AC mains lead after making all connections.

≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC power.

[BDT280]

[BDT180]

[BDT167]

[BD84]

HDMI IN

HDMI cable

( [Except_the_United_Kingdom_and_Ireland] supplied)

[BDT280]

[BDT180]

[BDT167]

[BD84]

AC adaptor (supplied)

To a household mains socket

AC mains lead (supplied)

≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.

It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p or

[BDT280] [BDT180]

24p (4K) signal, please use HDMI cables 5.0 meters or less.

[Except_the_United_Kingdom_and_Ireland] The HDMI-compliant cable is supplied with this unit.

[BDT180] [For_the_South_East_Asia_and_HongKong]

2 AC mains leads are supplied.

Use the AC mains lead that matches the socket for the area you live in.

≥ Thailand: With a label

This unit consumes a small amount of AC power ( > 34) even when turned off in standby mode. For

the purpose of energy conservation, the unit should be disconnected if you will not be using it for extended period of time.

≥ [BDT167] [BD84]

The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.

- 11 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 12 ページ 2020年4月13日 月曜日 午後4時23分

Connections and settings

Connecting to an amplifier/receiver

[BDT280]

[BDT180]

[BDT167]

[BD84]

HDMI cable

( [Except_the_United_Kingdom_and_Ireland] supplied)

HDMI cable

HDMI IN

HDMI OUT

(ARC)

HDMI IN

(ARC)

[BDT280]

[BDT180]

Amplifier/receiver

[BDT167]

[BD84]

Set “Digital Audio Output” ( > 25).

≥ [BDT280] [BDT180] [BDT167] When connecting to a non-3D or [BDT280] [BDT180] 4K compatible amplifier/receiver, connect this unit to a TV, then connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to 5.1ch.

≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”

(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.

- 12 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 13 ページ 2020年4月13日 月曜日 午後4時23分

Connections and settings

Connecting to the network

The following services can be used when this unit is connected to broadband.

Firmware can be updated ( > 15)

You can enjoy BD-Live ( > 18)

You can enjoy Network Service ( > 19)

≥ [BDT280] [BDT180]

You can access other devices (Home Network) ( > 20)

≥ [BDT280] This unit supports Wi-Fi Direct ® and can make a wireless connection to wireless devices without router. You can use this function when enjoying Home Network feature, etc. Internet access is not available while connected via Wi-Fi Direct ®

. ( >

20, 27)

For details about connection method, refer to the instructions supplied with the connected equipment.

[BDT280]

Wireless LAN connection

This unit has built-in Wi-Fi ® and can be connected to a wireless router.

Wireless router, etc.

Internet

≥ For up-to-date compatibility information on your wireless router, refer to http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ The unit is not compatible with public wireless LAN services (Hotspot etc.) provided in airports, stations, cafes, etc.

See page 3 for the precautions for wireless LAN connection.

LAN cable connection

[BDT280]

[BDT180]

[BDT167]

[BD84]

LAN Cable

Broadband router, etc.

Internet

≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.

≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.

- 13 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 14 ページ 2020年4月13日 月曜日 午後4時23分

Connections and settings

Settings

The following settings can be performed anytime

in the Setup menu. ( >

27, 28)

Easy Settings

After connecting your new player for the first time and pressing [ Í ], the basic settings screen will appear.

Preparation

Turn on the TV and select the appropriate video input.

1

Press [ Í ].

Setup screen appears.

2

Follow the on-screen instructions to continue with the settings.

Easy Network Setting

After completing “Easy Settings”, you can perform

“Easy Network Setting”.

Follow the on-screen instructions to establish your connection settings.

e.g., [BDT280]

Select “Wired” or “Wireless” and press [OK].

Easy Network Setting

Select a connection mode.

OK

RETURN

Wired

Wireless

[BDT280]

About the wireless connection

Before beginning wireless connection setup

≥ Obtain your network name (SSID*).

≥ If your wireless connection is encrypted, please be sure that you know your encryption key.

If your SSID is not displayed;

≥ Search again by pressing the red button on the remote control.

≥ Stealth SSIDs will not be displayed; in this case, enter manually by using “Manual setting”.

Press [HOME]

> press [OK] to select “Setup”

> select “Player Settings”

> select “Network” and press [OK]

> select “Network Settings” and press [OK]

> select “Wireless Settings” and press [OK]

> select “Connection Setting” and press [OK]

> select “Manual setting” and press [OK]

If your wireless network is encrypted;

Encryption Key input screen will be displayed.

Input the encryption key of your network.

≥ An USB keyboard can be used, but only for the keys displayed on the screen.

If your wireless router is supports WPS (Wi-Fi

Protected Setup TM );

You can easily set up a connection by pressing the green button on the remote control.

≥ Refer to the operating instructions of the hub or router.

≥ [BDT280] Do not use this unit to connect to any wireless network for which you do not have usage rights.

Using these networks may be regarded as illegal access.

≥ If you have trouble getting online on your PC after performing network settings on this unit, perform the network settings on your PC.

≥ [BDT280] Please be aware that connecting to a network without encryption may result in the leaking of data such as personal or secret information.

* SSID:

An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.

- 14 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 15 ページ 2020年4月13日 月曜日 午後4時23分

Firmware updates

Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.

Playback

Inserting or removing media

This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection.

*

When a new firmware version is available, the following message is displayed.

Firmware Update

New Version: X.XX

Current Version: X.XX

Do you want to start firmware update?

For the update information, please visit the following website: http://panasonic.jp/support/global/cs/

Yes No

OK

RETURN

You can also download the latest firmware from the following website and store it to a USB device to update the firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.

After the firmware is installed, unit will restart and the following screen will be displayed.

e.g.,

The firmware has been updated.

Current Version : x.xx

Notes

≥ When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.

≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected equipment. For details, refer to the instructions for the connected equipment.

CAUTION

Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and this may cause malfunction.

RETURN

To show the firmware version on this unit. ( > 29,

“Firmware Version Information”)

≥ Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment.

≥ If you do not want to check for the latest firmware version,

set “Automatic Update Check” to “Off”. ( > 29)

* You must agree to the terms of use for the Internet function and the privacy policy. ( [BDT280] [BDT180]

> 16, “Notice”,

[BDT167] [BD84]

> 28, “Notice”)

- 15 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 16 ページ 2020年4月13日 月曜日 午後4時23分

Playback

HOME menu

Major functions of this unit can be operated from the HOME menu.

Preparation

Turn on the TV and select the appropriate video input.

1

Press [ Í ] to turn on the unit.

≥ After network service introduction banner is shown, the HOME menu is displayed.

– When connected to the network, the banner content may be changed.

– You can disable the “Start-up Banner”

( > 29).

2

Press [OK] or [ 3 , 4 , 2 , 1 ] to select the item.

≥ If there are any other items, repeat this step.

[BDT280] [BDT180]

Videos/Photos/Music

Disc

USB

[BDT280] [BDT180]

Network

Network Service

Home Network

HOME

Blu-ray Disc Player

Network

Play back the contents.

( > 17)

≥ When multiple contents are recorded, select the types of contents or the title.

Displays the Home

Screen of Network

Service. ( > 19)

DLNA Client

( > 20)

[BDT280]

Miracast

( > 20)

Media Renderer

( > 21)

[BDT167] [BD84]

Network Service

Displays the Home Screen of Network Service.

( > 19)

Setup

Notice

Photos Setup

Videos

Music

Setup

Player Settings

( > 24)

USB Management

( > 18)

[For_the_South_East_Asia]

[For_the_HongKong]

USB Sharing

( > 22)

Wallpaper

Changes the background of HOME menu.

[BDT280] [BDT180]

Notice

Displays the terms of service for the cloud services.

To show the HOME menu

Press [HOME].

≥ Items to be displayed may vary with the media.

- 16 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 17 ページ 2020年4月13日 月曜日 午後4時23分

Playback

Playback

1

Insert the media.

Playback starts depending on the media.

2

Select the item to play and press [OK].

Repeat this step if necessary.

≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE

DISPLAYED. Press [ ∫ STOP] when you have finished playback to protect the unit’s motor, your TV screen and so on.

≥ [BDT280] [BDT180] When the following conditions are met, a still picture will be played back in 4K. The resolution of the still picture will be changed automatically.

– The unit is connected to a 4K compatible TV

– “HDMI Video Format” is set to “Automatic” ( > 25)

– The still picture is being played back in 2D

≥ It is not possible to play back AVCHD and MPEG2 videos which have been dragged and dropped or copied and pasted to the media.

Operations during playback

The following functions may not work depending on the media and contents.

Search/Slow motion

Search

While playing, press [SEARCH 6 ] or

[SEARCH 5 ].

Slow motion

While paused, press [SEARCH 5 ].

≥ Xvid, MKV, MP4 and MPEG2: Not effective.

The speed increases up to 5 steps.

≥ Music, MP3, etc.: The speed is fixed to a single step.

≥ Press [ 1 PLAY] to revert to normal playback speed.

Skip

While playing or paused, press [ : ] or

[ 9 ].

Skip to the title, chapter or track.

Stop

Press [ ∫ STOP].

The stopping point is memorized.

Frame-by-frame

While paused, press [ 1 ] ( ;1 ).

≥ Press and hold to fast forward.

≥ Press [ 1 PLAY] to revert to normal playback speed.

≥ Xvid, MKV, MP4 and MPEG2: Not effective.

Resume play function

Press [ 1 PLAY] to restart from this point.

≥ The point is cleared if the media is removed.

≥ On BD-Video discs including BD-J, the resume play function does not work.

Changing soundtrack

Press [AUDIO].

You can change the audio channel number or soundtrack language, etc.

Pause

Press [ ; PAUSE].

≥ Press [ ; PAUSE] again or [ 1 PLAY] to restart play.

Show top menu/pop-up menu

Press [TOP MENU] or [POP-UP MENU].

Select the item and press [OK].

- 17 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 18 ページ 2020年4月13日 月曜日 午後4時23分

Playback

Show the status messages

While playing, press [STATUS].

The status messages give you information about what is currently being played. Each time you press [STATUS], the display information may change or disappear from the screen.

≥ Depending on media and contents, the display may change or not appear.

e.g., BD-Video

A B

BD-Video

Play

T1 C1 0:05.14

0:20.52

C D

A T: Title, C: Chapter, PL: Playlist

B Elapsed time in the title

C Current position

D Total time e.g., JPEG

Date 11.12.2007

Size

Manufacturer

Equipment

500 X 375

1 / 26

Enjoying BD-Live

With “BD-Live” discs, you can enjoy bonus contents that use Internet access.

For this BD-Live function, connection of a USB device is necessary along with Internet connection.

1

Perform network connection and settings.

( >

13, 14)

2

Connect a USB device with 1 GB or more free space.

≥ The USB device is used as the local storage.

3

Insert the disc.

Deleting data on the USB device

Select “USB Management” in the HOME menu

( > 16), then select “BD-Video Data Erase” and

press [OK].

≥ The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visit their website.

≥ “BD-Live Internet Access” may need to be changed for

certain discs ( > 28).

[BDT280] [BDT180] [BDT167]

Enjoying 3D video and photos

Preparation

Connect this unit to a 3D compatible TV. ( > 11)

≥ Perform the necessary preparations for the TV.

≥ Play back following the instructions displayed on the screen.

3D Settings ( >

24, 26)

≥ Please refrain from viewing 3D images if you do not feel well or are experiencing visual fatigue.

In the event that you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.

≥ 3D video might not output the way it is set in “HDMI Video

Format” and [BDT280] [BDT180] “24p(4K)/24p Output”/

[BDT167]

“24p Output” ( > 25).

≥ When playing back 3D photos from “Photos” screen, select from the “3D” list. (Still pictures in “2D” are played back in

2D.)

If “2D” and “3D” indications are not displayed, press the red button on the remote control to switch the view of playback contents.

Slideshow

Play a slideshow of photos and adjust various settings during the playback.

1

Insert the media.

2

Select “Photos”.

3

Select an item and press the green button.

The following items can be set.

Start

Slideshow

Interval

Transition

Effect

Repeat Play

Start the slideshow.

You can display still pictures in the selected folder one by one at a constant interval.

Change the display interval.

Select the effect when sliding pictures.

Set whether to repeat the slideshow.

≥ Still pictures displayed as “ with this unit.

” cannot be played back

- 18 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 19 ページ 2020年4月13日 月曜日 午後4時23分

Playback

Enjoying Network

Service

Network Service allows you to access some specific websites supported by Panasonic.

[BDT167] [BD84]

This unit has no full browser function and some features of websites may not be available.

Network Service provides a variety of selected Internet services such as the following.

≥ Online movie rental service

≥ Video browsing service

[BDT280]

X

XXXXXXXX

XXXXXX

XXXXXXXXXXXXXXX

XXXXXXXXXXX

XXXXXX, XXXX

39°C

XXXXXXXX

MORE

BACK

Market

XXXXX

XXXXXXXXXXXXXXXXXXXX

XXXX

XXXX

*

≥ When playing content in the media, Network Service cannot be accessed by pressing [INTERNET].

≥ An USB keyboard can be used, but only for the keys displayed on the screen. It may not be used depending on the service.

≥ In the following cases, settings are possible using the

Setup menu items.

– When restricting the use of Network Service

( > 28, “Network Service Lock”)

– When correcting the displayed time

( > 27, “Time Zone”, “Summer Time”)

– When using another device such as a smartphone in combination with the unit by using a certain app on the device

( > 27, “Remote Device Operation”)

≥ When using a slow Internet connection, the video may not be displayed correctly. A high speed Internet service with a speed of at least 6 Mbps is recommended.

≥ Be sure to update the firmware as soon as a firmware update notice is displayed on the screen. If the firmware is not updated, you may not be able to use Network Service

function properly. ( > 15)

≥ Network Service Home Screen is subject to change without notice.

≥ The services through Network Service are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services.

≥ Some features of websites or content of the service may not be available.

≥ Some content may be inappropriate for viewers.

≥ Some content may only be available for specific countries and may be presented in specific languages.

Internet

* Images are for illustration purposes, contents may change without notice.

Preparation

Network connection ( > 13)

Network settings ( > 14)

1

Press [INTERNET].

[For_the_United_Kingdom_and_Ireland]

[For_Australia_and_New_Zealand]

≥ Netflix can be accessed directly by pressing [NETFLIX] button even when this unit is off.

2

Select the item and press [OK].

To exit from Network Service

Press [HOME].

- 19 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 20 ページ 2020年4月13日 月曜日 午後4時23分

Playback

Home Network feature

Before using the following features, be sure to configure the connected equipment on your

Home Network.

[BDT280]

Using Miracast

TM

You can enjoy the content you are viewing on a

Miracast-compatible smartphone, etc. on the big screen of your TV.

≥ Compatible with Android TM devices, ver. 4.2 and above and Miracast certified.

For information on whether the smartphone, etc. supports Miracast, contact the manufacturer of the device.

[BDT280] [BDT180]

Playing back contents on the

DLNA server

You can share photos, videos and music stored in the DLNA Certified media server [PC with

Windows 7 installed, smartphone, recorders, etc.] connected to your home network.

About support format of DLNA ( > 35).

Player

Server

Player

Miracast compatible device

Preparation

1

Perform network connection ( > 13) and

network settings ( > 14) of this unit.

2 Add the contents and folder to the libraries of the Windows Media ® Player or the smartphone, etc.

≥ Playlist of Windows Media ® Player can play back only the contents that are stored in the libraries.

≥ When connected to Panasonic DLNA compatible recorders, register this unit to your

Panasonic DLNA compatible recorders.

1

Press [MIRACAST].

2

Operate the Miracast compatible device.

≥ On the device, enable Miracast and select this unit as the device to be connected.

For details, refer to the instructions supplied with the device.

To exit from Miracast

Press [HOME].

1

Press [HOME].

2

Select “Network”.

3

Select “Home Network”.

4

Select “DLNA Client”.

≥ The list can be updated by pressing the red button on the remote control.

≥ [BDT280] The connection method can be switched to Wi-Fi Direct by pressing the green button on the remote control.

5

Select the equipment and press [OK].

6

Select the item to play and press [OK].

≥ You may be able to use convenient functions depending on the content by pressing [OPTION].

To exit from Home Network

Press [HOME].

- 20 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 21 ページ 2020年4月13日 月曜日 午後4時23分

Playback

[BDT280] [BDT180]

Using the Digital Media

Controller

You can use a smartphone or tablet as the Digital

Media Controller (DMC) to playback contents from DLNA server on the Renderer (this unit).

Possible applications:

[BDT280] [BDT180]

About DLNA and Media Renderer

For more details, refer to the following website and the operating instructions for each of the equipment.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ [BDT280] Wi-Fi Direct connection while using Home

Network feature is only temporary, and the network connection method returns to the original setting when exiting.

≥ [BDT280] Depending on the device or connection environment, the data transfer rate may decrease.

≥ Depending on the contents and the connected equipment, playback may not be possible.

≥ Items displayed in grey on the display cannot be played back by this unit.

Renderer

Server

Controller

*

*

Renderer

Server

+

Controller

*

* DMC compatible software should be installed.

Preparation

Perform steps 1 and 2

. ( > 20)

3 Perform the “Remote Device Settings”.

( > 27)

≥ You can register up to 16 devices.

1

Press [HOME].

2

Select “Network”.

3

Select “Home Network”.

4

Select “Media Renderer”.

5

[BDT280] Select “Home Network” or “Wi-Fi

Direct” and press [OK], then follow the indications on the screen.

6

Operate the DMC compatible devices.

To exit from Media Renderer screen

Press [HOME].

- 21 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 22 ページ 2020年4月13日 月曜日 午後4時23分

“HDMI CEC”

This unit supports “HDMI CEC” (Consumer

Electronics Control) function.

You can use this function by connecting the equipment that supports “HDMI CEC”.

See the operating instructions for connected equipment for operational details.

Preparation

1

Set “HDMI CEC” to “On” ( > 29).

(The default setting is “On”.)

2 Set the “HDMI CEC” operations on the connected equipment (e.g., TV).

3 Turn on all “HDMI CEC” compatible equipment and select this unit’s input channel on the connected TV so that the “HDMI CEC” function works properly.

Repeat this procedure when the connections or settings are changed.

Automatic input switching

Power on link

When the unit starts playback, the TV will automatically switch the input channel and the screen of the unit will be displayed.

Additionally when the TV is off, the TV will automatically turn on.

Power off link

All connected equipment compatible with “HDMI

CEC”, including this unit, automatically turns off when you switch the TV off.

Easy control only with TV remote control

By using the TV remote control, you can perform the same operations as you use the remote

control of this unit. ( > 10)

≥ This unit supports the “HDMI CEC” (Consumer Electronics

Control) function. However, operation cannot be guaranteed on all HDMI CEC devices.

Playback

USB Sharing

[For_the_South_East_Asia_and_HongKong]

This function allows you to copy content between the following media.

Disc

USB

Preparation

Insert the media. ( > 15)

1

Press [USB SHARING].

2

Select the copy source and press [OK].

3

Select the folder or file to be copied and press the red button on the remote control.

≥ Press the red button on the remote control again to cancel.

4

Press [OK].

5

Select the copy destination and press

[OK].

6

Select “Yes” on the confirmation screen and press [OK].

≥ When the destination contains a folder or file with the same name, you can change the option for resolving the conflict by pressing [OPTION].

≥ You cannot set the media formatted to NTFS as a copy destination.

≥ Copying of files in all formats is not guaranteed.

≥ Videos on discs and copyrighted content on discs cannot be copied.

≥ Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of copying content (data), and does not guarantee any content if copying does not work properly.

≥ The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content. Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your behalf. It is your responsibility to ensure that your use of this or any other device complies with applicable copyright legislation in your country. Please refer to that legislation for more information on the relevant laws and regulations involved or contact the owner of the rights in the content you wish to record or playback.

- 22 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 23 ページ 2020年4月13日 月曜日 午後4時23分

Settings

A variety of playback operations and settings can be performed from this menu.

Available options differ depending on the playing contents and the condition of the unit.

1

Press [OPTION].

2

≥ When playing music, select “Playback

Settings” and press [OK].

[BDT280] [BDT180] [BDT167] e.g., BD-Video

Operation Menu

Soundtrack

Subtitle

Angle

Repeat Play

Status

Primary Video

Secondary Video

Zoom

Top Menu

Pop-up Menu

Select an item and change the settings.

To exit the screen

Press [OPTION].

Regarding Language : ( > 36)

Operation Menu

1 ENG Dolby TrueHD 3/...

Off

1MPEG-4 AVC

∫ Soundtrack

Show or change the soundtrack.

∫ Audio channel

Select the audio channel number.

∫ Subtitle

Change the subtitle settings.

∫ Angle

Select the number of the angle.

∫ Repeat Play

Select the item that you want to repeat.

≥ You can repeat the playback of a chapter, playlist, the entire disc, etc., but the items displayed will differ depending on the type of the media.

≥ Select “Off” to cancel.

∫ Random

Select whether or not to play random.

∫ Start Slideshow

Start the slideshow.

∫ Status

Show the status messages.

[BDT280] [BDT180]

∫ Sound

Select the soundtrack and audio channel number during the playback of DLNA.

[BDT280]

∫ Reception

The radio wave status during the playback of

DLNA is displayed. (Only when a wireless connection is used)

∫ Rotate RIGHT

∫ Rotate LEFT

Rotate the still picture.

∫ Wallpaper

Set the still picture to the wallpaper of HOME

menu. ( > 16)

∫ Video

The recording method of original video appears.

∫ Primary Video

The recording method of original primary video appears.

∫ Secondary Video

Video

Soundtrack

Select on/off for images. The recording method of original video appears.

≥ During search/slow motion, only the primary video is displayed.

Select on/off for audio and the language.

∫ Zoom

Videos and pictures are magnified.

∫ Top Menu

Display Top Menu.

∫ Pop-up Menu

Display Pop-up Menu.

∫ Menu

Display Menu.

- 23 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 24 ページ 2020年4月13日 月曜日 午後4時23分

Picture Settings

∫ Picture Mode

Select the picture quality mode during play.

≥ If you select “User”, you can change settings in

“Picture Adjustment”.

∫ Picture Adjustment

Specific picture quality settings can be changed.

∫ Progressive

Select the method of conversion for progressive output to suit the type of material being played.

≥ If the video is disrupted when “Auto” is selected, select either “Video” or “Film” depending on the material to be played back.

∫ 24p

Movies and other material recorded on

DVD-Video at 24p are output at 24p.

≥ [BDT280] [BDT180] Only when you have selected

“24p(4K)” or “24p” in “24p(4K)/24p Output”

( > 25) and play discs recorded at a rate of

60 fields per second.

[BDT167] [BD84] Only when you have selected “On”

in “24p Output” ( > 25) and play discs recorded

at a rate of 60 fields per second.

≥ This may not work with the PAL contents.

∫ Reset to Default Picture Settings

Return picture settings to the factory defaults.

Settings

Setup menu

Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.

Some items are common to the Option menu. You can get the same effect with both menus.

1

Press [HOME].

2

Press [OK] to select “Setup”.

3

Select “Player Settings”.

[BDT280] [BDT180] [BDT167]

Player Settings

Picture

Sound

3D

Language

Network

Ratings

System

OK

RETURN

Picture Mode

Picture Adjustment

HDMI Output

Normal

4

Select an item and change the settings.

To exit the screen

Press [HOME].

[BDT280] [BDT180] [BDT167]

3D Settings

[BDT280] [BDT180]

∫ Signal Format

Original

Side by side

2D to 3D

Keep original picture format.

3D picture format comprising of left and right screens.

Converts 2D pictures to 3D effect.

∫ Distance

Set the amount of depth perception.

∫ Graphic Display Level

3D position for the Option menu or message screen, etc. can be adjusted during 3D playback.

- 24 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 25 ページ 2020年4月13日 月曜日 午後4時23分

Settings

Picture

Picture Mode ( > 24)

Picture Adjustment ( > 24)

∫ HDMI Output

Press [OK] to show the following settings:

¾ HDMI Video Format

The items supported by the connected devices are indicated on the screen as “ ¢ ”. When any item without “ ¢ ” is selected, the images may be distorted.

≥ If “Automatic” is selected, the best suited output resolution to the connected TV is automatically selected.

≥ To enjoy high-definition video up-converted to

1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition

TV). If this unit is connected to an HDTV through other equipment, the other equipment must also be 1080p compatible.

[BDT280] [BDT180]

¾ 24p(4K)/24p Output

This setting is for selecting the output method for content recorded in 24p* 1 , such as movies.

24p(4K)

Outputs signals by upconverting them to 4K* 2 .

Outputs in 24p.

24p

≥ Connect the compatible TV for each (4K or

1080/24p) output to the HDMI AV OUT terminal of this unit.

≥ “24p(4K)” works only when playing back in

2D.

≥ When playing DVD-Video, set this setting to

“24p(4K)” or “24p”, and then “24p” in “Picture

Settings” ( > 24) to “On”.

≥ When BD-Video/DVD-Video images other than 24p are played, images are output at

60p.

[BDT167] [BD84]

¾ 24p Output

When this unit is connected to a TV supporting

1080/24p output, movies and other material recorded at 24p* 1 are output at 24p.

≥ When playing DVD-Video, set to “On” and

then set “24p” in “Picture Settings” ( > 24) to

“On”.

≥ When BD-Video/DVD-Video images other than 24p are played, images are output at

60p.

¾ Deep Colour Output

This setting is for selecting whether to use Deep

Colour Output when a TV that supports Deep

Colour is connected.

¾ Contents Type Flag

Depending on the playback content, the TV will output adjusting to the optimal method when a

TV that supports this function is connected.

*1

*2

A progressive image recorded at a rate of 24 frames per second (motion-picture film). Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials.

A high resolution image/display technology of approximately 4000 (width) k 2000 (height) pixels.

Sound

∫ Dynamic Range Compression

You can listen at low volumes but still hear dialogue clearly.

(Dolby Digital, Dolby Digital Plus and Dolby

TrueHD only)

≥ “Automatic” is effective only when playing

Dolby TrueHD.

∫ Digital Audio Output

Press [OK] to show the following settings:

¾ Dolby D/Dolby D +/Dolby TrueHD

¾ DTS/DTS-HD

[BDT280] [BDT180] [BDT167]

¾ DSD Output Mode

Select the audio signal to output.

≥ Select “PCM” or

[BDT280] [BDT180] [BDT167]

“Off”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment.

≥ If you do not make proper settings the audio may be static or noisy.

¾ BD-Video Secondary Audio

Select whether or not to mix the primary and secondary audio (including the button click sound).

If “Off” is selected, the unit outputs the primary audio only.

- 25 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 26 ページ 2020年4月13日 月曜日 午後4時23分

∫ Downmix

Select the downmix system of multi-channel to

2-channel sound.

≥ Select “Surround encoded”, when the connected equipment supports the virtual surround function.

≥ The downmix effect is not available when

“Digital Audio Output” is set to “Bitstream”.

≥ The audio will be output in “Stereo” in the following cases:

– AVCHD playback

– Playback of secondary audio (including the button click sound).

∫ DTS Neo:6

2ch (2.1ch) audio is expanded to 7ch (7.1ch).

≥ This function works when the following conditions are met:

– Audio recorded at 96 kHz or lower is output.

– “Digital Audio Output” is set to “PCM” when audio other than PCM is output.

Settings

[BDT280] [BDT180] [BDT167]

3D

∫ 3D BD-Video Playback

Select the playback method of 3D compatible video software.

∫ 3D Playback Message

Set to display or hide the 3D viewing warning screen when playing back the 3D compatible video software.

Graphic Display Level ( > 24)

Language

∫ Soundtrack Preference

Choose the language for audio.

≥ If “Original” is selected, the original language of each disc will be selected.

≥ When the selected language is not recorded on the disc, or depending on how the navigation is created on the disc, it may playback in a different language than the selected language.

Enter a code ( > 36) when you select “Other

¢¢¢¢ ”.

∫ Subtitle Preference

Choose the language for the subtitle.

≥ When “Automatic” is selected, a subtitle for the language selected in the “Soundtrack

Preference” is displayed only when the language other than the language selected in the “Soundtrack Preference” is played back.

≥ When the selected language is not recorded on the disc, or depending on how the navigation is created on the disc, it may playback in a different language than the selected language.

Enter a code ( > 36) when you select “Other

¢¢¢¢ ”.

∫ Menu Preference

Choose the language for the disc menus.

Enter a code ( > 36) when you select “Other

¢¢¢¢ ”.

[Except_South_East_Asia_and_HongKong]

∫ Subtitle Text

Select a desired item according to the language used for MKV/Xvid subtitles text.

≥ This item is displayed only after playing back a file.

[Except_Australia,_New_Zealand]

∫ On-Screen Language

Choose the language for menus and on-screen messages.

- 26 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 27 ページ 2020年4月13日 月曜日 午後4時23分

Network

Easy Network Setting ( > 14)

∫ Network Settings

Perform network-related settings individually.

Press [OK] to show the following settings:

[BDT280]

¾ LAN Connection Mode

Select the LAN connection method.

≥ [For_the_United_Kingdom_and_Ireland] When not using wireless LAN (when turning it off), select

“Wired”.

[BDT280]

¾ Wireless Settings

This allows the wireless router and connection settings to be set up. Current connection settings and connection state can be checked.

Press [OK] to show the following settings:

Connection Setting

The wireless router connection wizard will be displayed.

Double Speed Mode Setting (2.4GHz)

Set the connection speed for a 2.4 GHz wireless format.

≥ If you connect using the “Double Speed

Mode (40MHz)”, 2 channels use the same frequency band, and there is consequently a greater risk of reception interference. This can cause the connection speed to drop or become unstable.

¾ IP Address / DNS Settings

This is for checking the state of the network connection and setting the IP address and

DNS-related.

Press [OK] to show the respective setting.

¾ Proxy Server Settings

This is for checking the state of connection with the Proxy server and performing settings.

Press [OK] to show the respective setting.

Settings

¾

Network Service Settings ( > 19)

Press [OK] to show the following settings:

Time Zone

Set the unit’s time to match your location.

≥ Some Network Service contents require the time zone to be set. Set time zone if necessary.

Summer Time

Select “On” when using summer time.

[BDT280] [BDT180]

[Except_South_East_Asia_and_HongKong]

¾ Network Drive Connection

This unit can access a hard disk shared folder on a network and play back videos, still pictures, and music.

For the setting and operation method of connected equipment, refer to the following website.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

¾

Remote Device Settings ( >

19, 21)

Press [OK] to show the following settings:

Remote Device Operation

Enable to start Network Service on this unit by using another device such as Smartphone, etc.

[BDT280] [BDT180] Enable to operate the unit by

DMC.

Device Name Entry

Set the name of this unit to be displayed on the connected equipment.

[BDT280] [BDT180]

Registration Type

Automatic

Manual

Allow connections to all the equipment accessing this unit.

Set the permission for individual equipment connections accessing this unit.

[BDT280] [BDT180]

Remote Device List

Registering/deregistering of the displayed equipment can be performed when “Manual” in “Registration Type” is selected.

- 27 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 28 ページ 2020年4月13日 月曜日 午後4時23分

Settings

¾

BD-Live Internet Access ( > 18)

You can restrict Internet access when BD-Live functions are used.

≥ If “Limit” is selected, Internet access is permitted only for BD-Live contents which have content owner certificates.

[BDT167] [BD84]

∫ Notice

Displays the terms of service for the cloud services.

Ratings

The following items use the same password.

Don’t forget your password.

∫ DVD-Video Ratings

Set a ratings level to limit DVD-Video play.

∫ BD-Video Ratings

Set an age limit of BD-Video play.

∫ Network Service Lock

You can restrict the usage of Network Service.

System

∫ Easy Settings

You can execute basic settings.

∫ TV Settings

Press [OK] to show the following settings:

¾ TV Aspect

Set to match the type of TV connected.

When connected to a 4:3 aspect TV and playing

16:9 ratio image:

4:3 Pan & Scan

4:3 Letterbox

The sides are cut off so the picture fills the screen.

When playing BD-Video, video is output as “4:3

Letterbox”.

Black bands appear at the top and bottom of the picture.

When connected to a 16:9 widescreen TV and playing 4:3 ratio image:

16:9

16:9 full

Video is displayed as a 4:3 ratio image in the centre of the screen.

Video is displayed as a horizontally stretched 16:9 image.

¾ TV System

Perform the setup so it matches the TV System of the connected TV.

¾ Screen Saver Function

This is to prevent image retention on the screen.

≥ When this is set to “On”:

If a list of playback content is displayed and there is no operation for 10 minutes or more, the screen switches to HOME menu automatically.

≥ While playing and pausing, etc., this function is not available.

- 28 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 29 ページ 2020年4月13日 月曜日 午後4時23分

Settings

¾ On-Screen Messages

Choose whether to show status messages automatically.

¾ HDMI CEC

Set to use “HDMI CEC” function when connected to a device that supports “HDMI

CEC”.

≥ Select “Off” when you do not want to use

“HDMI CEC”.

∫ Start-up Banner

Select whether to display the banner after turning

on this unit. ( > 16)

∫ Quick Start

Speed of start-up from standby mode is increased.

[For_the_United_Kingdom_and_Ireland]

≥ When set to “On”, the internal control unit will be powered and in Network standby mode. The idle power consumption will increase so compared to when set to “Off”.

(Power consumption > 34)

[For_Australia_and_New_Zealand]

[For_the_South_East_Asia_and_HongKong]

≥ When set to “On”, the internal control unit will be powered and the idle power consumption will increase so compared to when set to “Off”.

(Power consumption > 34)

∫ Remote Control

Change the remote control code if other

Panasonic products react to this remote control.

Firmware Update ( > 15)

Press [OK] to show the following settings:

¾ Automatic Update Check

When this equipment remains connected to the

Internet, it will check for the latest firmware version when it is turned on and you can update it if necessary.

¾ Update Now

You can update the firmware manually if a firmware update is available.

∫ System Information

Press [OK] to show the following settings:

¾ Software Licence

Information about the software used by this unit is displayed.

¾ Firmware Version Information

Display firmware version of this unit and

[BDT280] wireless LAN module.

∫ Default Settings

This returns all values in the Setup menu and the

Option menu to the default settings, except for some settings of network, ratings, remote control code, on-screen language*, etc.

* [Except_Australia,_New_Zealand]

- 29 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 30 ページ 2020年4月13日 月曜日 午後4時23分

Reference

Before requesting service, please perform the following checks.

If the problem remains unresolved, consult your dealer for instructions.

Unit does not respond to remote control or unit’s buttons.

Disconnect the AC mains lead, wait 1 minute, then reconnect the AC mains lead.

Do you have the latest firmware installed?

Panasonic is constantly improving the unit’s firmware to ensure that our customers are

enjoying the latest technology. ( > 15)

The following do not indicate a problem with this unit:

– Regular disc rotating sounds.

– Image disturbance during search.

[BDT280] [BDT180] [BDT167]

Image disturbance when replacing 3D discs.

Cannot eject disc.

1 Turn the unit on.

2 Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– POWER LED starts to flash, and “00 RET” is displayed on the screen.

3 Press [ 1 ] (right) repeatedly on the remote control until “06 FTO” is displayed on the screen.

4 Press [OK].

General operation

To return to the factory defaults.

¾ Select “Yes” in “Default Settings” in the Setup

menu. ( > 29)

To return all settings to the factory preset.

¾ Reset the unit as follows:

1 Turn the unit on.

2 Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– POWER LED starts to flash, and “00 RET” is displayed on the screen.

3 Press [ 1 ] (right) repeatedly on the remote control until “08 FIN” is displayed on the screen.

4 Press and hold [OK] for more than 5 seconds.

The remote control does not work properly.

¾ Change the batteries in the remote control.

( > 5)

¾ The remote control and this unit are using different codes.

Turn on this unit by using the standby/on switch on this unit, and check “Remote control  ”, which is displayed on the screen when you press a button on the remote control.

Press and hold [OK] and the displayed number (“  ”) for more than 5 seconds.

The TV tuner mode is not displayed when the

TV is turned on.

¾ This phenomenon may occur, depending on the

TV setting, when “Quick Start” is set to “On”.

¾ Depending on the TV, this phenomenon may be prevented by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting.

This unit is turned off automatically.

¾ To save on electricity, this unit is turned off automatically if there is no button operation for about 20 minutes when not playing back

(such as when paused or displaying the menu, displaying still pictures, etc.).

You have forgotten your ratings password.

You want to cancel the ratings level.

¾ The ratings level returns to the factory defaults.

1 Turn the unit on.

2 Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– POWER LED starts to flash, and “00 RET” is displayed on the screen.

3 Press [ 1 ] (right) repeatedly on the remote control until “03 VL” is displayed on the screen.

4 Press [OK].

The TV screen turns black.

¾ In the following cases, HDMI authentication takes place and a black screen is displayed:

[BDT280] [BDT180]

When “24p(4K)/24p Output” is set to “24p(4K)” or “24p”.

[BDT167] [BD84]

When “24p Output” is set to

“On”.

[BDT280] [BDT180] [BDT167]

When the display is switched between 2D and 3D images.

[BDT280] [BDT180]

When you quit the 4K playback of a still picture by displaying another screen, including the HOME menu.

- 30 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 31 ページ 2020年4月13日 月曜日 午後4時23分

Reference

This unit does not recognize the USB connection correctly.

¾ Disconnect and re-connect the USB cable. If it still does not recognize the connection, turn this unit off and on again.

¾ USB devices may not be recognized by this unit when connected using the following :

– a USB hub

– a USB extension cable

¾ If you connect USB HDD to this unit, use the

USB cable that is supplied with the HDD.

Picture

The images from this unit do not appear on the TV.

Picture is distorted.

¾ An incorrect resolution is selected in “HDMI

Video Format”. Reset the setting as follows:

1 Turn the unit on.

2 Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– POWER LED starts to flash.

3 Press [8] and the blue button on the remote control at the same time for more than

5 seconds.

Set the item again. ( > 25)

– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD ® audio are not output properly,

select “Yes” in “Default Settings” ( > 29) and

make proper settings.

¾ PAL discs cannot be correctly viewed on an

NTSC TV.

¾ [BDT280] [BDT180] [BDT167]

When “3D BD-Video

Playback” in the Setup menu is set to

“Automatic”, images may not be output depending on the connection method. After removing the disc from this unit, select “Set before play” in the Setup menu, and select

“2D Playback” in the setup screen displayed

when playing 3D discs. ( > 26)

¾ [BDT280] [BDT180]

When outputting in 24p (4K), images may be distorted depending on the

HDMI cable. Use an HDMI cable that supports 4K output.

Video is not output in high-definition.

¾ Confirm that “HDMI Video Format” in the

Setup menu is set properly. ( > 25)

[BDT280] [BDT180] [BDT167]

3D video is not output.

¾ Connect to a full high-definition TV.

¾ Is there a non-3D compatible amplifier/ receiver connected between this unit and a

TV? ( > 12)

¾ Are the settings on this unit and the TV

correct? ( > 18)

¾ Is the amplifier/receiver that is connected between this unit and TV on?

¾ Depending on the connected TV, the video being played back might switch to 2D video due to changes in resolution etc. Check the

3D setting on the TV.

[BDT280] [BDT180] [BDT167]

3D video is not output correctly as 2D.

¾ Select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen

displayed when playing 3D discs. ( > 26, “3D

BD-Video Playback”)

¾ Discs that have recorded titles with Side by side (2 screen structure) and that can be enjoyed in 3D are played back in accordance with the settings of the TV.

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

¾ Confirm the “TV Aspect” is set properly.

( > 28)

¾ Adjust the aspect setting on the TV.

Audio

Cannot switch audio.

¾ The audio cannot switch, if “Digital Audio

Output” is set to “Bitstream” or [BDT280] [BDT180]

[BDT167] “On”*. Set “Digital Audio Output” to

“PCM” or [BDT280] [BDT180] [BDT167]

“Off”*. ( > 25)

* For “DSD Output Mode”

Cannot hear the desired audio type.

¾ Check the connections and the “Digital Audio

Output” settings. ( >

12, 25)

- 31 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 32 ページ 2020年4月13日 月曜日 午後4時23分

Reference

Playback

Disc cannot be played.

¾

The disc is dirty. ( > 6)

¾

The disc is not finalized. ( > 8)

Still pictures (JPEG) do not play back normally.

¾ The images that were edited on the PC, such as Progressive JPEG, etc., may not be played back.

I can’t play back BD-Live.

¾ Confirm that this unit is connected to the

broadband Internet. ( > 13)

¾ Confirm the “BD-Live Internet Access”

settings. ( > 28)

¾ Confirm a USB device is connected to the

USB port. ( > 15)

¾ [BDT280] Connect this unit to the network by a wired connection.

Network

I can’t connect to the network.

¾ Confirm the network connection and settings.

( >

13, 14, 27)

¾ [BDT280] There may be interference that prevents the unit from detecting your home network. Place the unit and the wireless router closer to each other. This unit may be

able to detect your network name ( > 14,

“SSID”).

¾ Check the operating instructions for each device and connect accordingly.

[BDT280]

When using wireless LAN connection, video from the DLNA Certified media server is not played back or video frames are dropped during playback.

¾ Higher transfer rate router such as 802.11n

(2.4 GHz) wireless router may solve the problem. If you use 802.11n (2.4 GHz) wireless router, it is necessary to set the encryption type to “AES”.

Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems.

¾

On the “Wireless Settings” screen ( > 27), the

continuous lighting of at least 4 “Reception” indicators is the target for a stable connection.

If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your wireless router and see if the connection state improves. If there is no improvement, connect to a wired network and perform the “Easy Network

Setting” ( > 14) again.

- 32 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 33 ページ 2020年4月13日 月曜日 午後4時23分

Reference

Messages on the screen

Cannot play.

¾ You inserted an incompatible disc.

Cannot play on this unit.

¾ You tried to play a non-compatible image.

¾ Re-insert the media.

No disc inserted.

¾ The disc may be upside down.

$ This operation is not available.

¾ Some operations are unsupported by the unit.

(For example, reverse slow motion, etc.)

IP address is not set.

¾ The “IP Address” in “IP Address / DNS

Settings” is “---. ---. ---. ---”. Set the “IP

Address”, “Subnet Mask”, and “Gateway

Address”. (Select the automatic address acquisition if necessary.)

[BDT280]

The wireless access point currently has a low network security setting. It is recommended to change to a higher setting.

¾ Set a stronger network security level referring to the wireless router operating instructions.

POWER LED

When the POWER LED is flashing, check the message on the TV screen. If a message is not displayed on the TV screen, determine the type of the error by checking the way the POWER LED is flashing.

Flashes 6 times

¾ The remote control and this unit are using different codes.

Turn on this unit by using the standby/on switch on this unit, and check “Remote control

 ” which is displayed on the screen when you press a button on the remote control.

Press and hold [OK] and the displayed number (“  ”) for at least 5 seconds.

Flashes

¾ The copyright protected disc cannot be played back.

One of the devices connected to this unit (TV, amplifier, etc.) does not support copyright protection.

Flashes 3 times

¾ The disc in use cannot be played back since the copyright information is invalid.

- 33 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 34 ページ 2020年4月13日 月曜日 午後4時23分

Reference

Specifications

General

Signal system

Operating temperature range

PAL/NTSC i 5 o C to i 35 o C

Operating humidity range

HDMI AV output

10 % to 80 % RH (no condensation)

Output connector:

Type A (19 pin) 1 system

USB2.0: 1 system USB slot

Ethernet

[BDT280]

Wireless LAN

10BASE-T/100BASE-TX 1 system

Standard Compliance:

IEEE802.11 b/g/n

Frequency range:

2.4 GHz band

Security:

WPA TM /WPA2 TM (Encryption Type:

TKIP/AES, Authentication Type:

PSK), WEP (64 bit/128 bit)

LASER Specification Class 1 LASER Product

Wave length: 790 nm (CDs)/

660 nm (DVDs)/405 nm (BDs)

Laser power: No hazardous radiation is emitted with the safety protection

Power supply [BDT280] [BDT180]

[For_the_United_Kingdom_and_Ireland]

[For_Australia_and_New_Zealand]

AC 220 to 240 V, 50 Hz

[For_the_South_East_Asia_and_HongKong]

AC 220 to 240 V, 50 Hz/60 Hz

[BDT167] [BD84]

DC 12 V 0.8 A (DC IN terminal)

Power consumption*

Power consumption in standby mode*

[BDT280] [BDT180] Approx. 13 W

[BDT167] [BD84] Approx. 11 W

Approx. 0.5 W

(Quick Start: Off)

[For_the_United_Kingdom_ and_Ireland]

Power consumption in quick start standby mode

[BDT280] [BDT180]

Approx. 5.5 W

[BDT167] [BD84]

Approx. 3.5 W

(Quick Start: On)

[For_Australia_and_New_Zealand]

[For_the_South_East_Asia_ and_HongKong]

Power consumption in quick start standby mode*

[BDT280] [BDT180]

Approx. 5.5 W

[BD84]

Approx. 3.5 W

Dimensions

(W k H k D)

[BDT280] [BDT180]

312 mm k 43 mm k 180 mm

[BDT167] [BD84]

245 mm k 38.5 mm k 175 mm

Mass [BDT280] [BDT180]

Approx. 1.0 k g

[BDT167] [BD84]

Approx. 0.8 k g

* [BD84] Using supplied AC adaptor

≥ Specifications are subject to change without notice.

File format

File format

MKV

Xvid mp4

(H.264+AAC)

MPEG

(TS/PS)

JPEG

Extension Reference

“.MKV”, “.mkv” ≥ The video file and

[Except_South_East_Asia]

[Except_HongKong]

Subtitles text file

“.SRT”, “.srt”,

“.SSA”, “.ssa”,

“.ASS”, “.ass” subtitles text file are inside the same folder, and the file names are the same except for the file extensions.

≥ Some MKV/Xvid files may not be played back correctly, depending on

“.AVI”, “.avi” the video resolution, frame rate condition, subtitle format and so on.

[Except_South_East_Asia]

[Except_HongKong]

Subtitles text file

“.SRT”, “.srt”,

“.SUB”, “.sub”,

“.TXT”, “.txt”

“.MP4”, “.mov”

“.mpg”, “.mpeg”,

“.m2ts”, “.mts”,

“.ts”

“.JPG”, “.jpg”,

“.jpeg”

Some mp4/MPEG files may not be played back correctly, depending on the video resolution, frame rate condition and so on.

≥ MOTION JPEG and

Progressive JPEG are not supported.

≥ You may not be able to play back the file if you have edited the folder structure or the file name on a PC or other device.

[BDT280]

[BDT180]

[BDT167]

MPO

“.MPO”, “.mpo” 3D still picture

MP3

FLAC

WAV

AAC

WMA

DSD

ALAC

“.MP3”, “.mp3”

“.FLAC”, “.flac”

“.WAV”, “.wav”

“.M4A”, “.m4a”,

“.AAC”, “.aac”

“.WMA”, “.wma”

“.DSF”, “.dsf”,

“.DFF”, “.dff”

“.M4A”, “.m4a”

This unit supports ID3 tags, but only titles, artist names and album names can be displayed.

Maximum sampling rate:

192 kHz/24 bit

Maximum sampling rate:

192 kHz/24 bit

This unit supports ID3 tags.

Maximum sampling rate:

48 kHz/320 kbps

This unit supports ID3 tags.

Maximum sampling rate:

48 kHz/385 kbps

Maximum sampling rate:

5644 kHz/8 ch

Maximum sampling rate:

192 kHz/24 bit/2 ch

≥ With certain recording states and folder structures, the play order may differ or playback may not be possible.

- 34 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 35 ページ 2020年4月13日 月曜日 午後4時23分

Reference

Audio information

The audio output differs depending on the

settings on the unit. ( > 25, “Digital Audio Output”)

≥ The number of channels listed is the maximum possible number of output channels when connected to amplifier/ receiver compatible with the respective audio format.

Output channel

*3

“Digital Audio Output”

“Bitstream”/“On”

*4

Outputs using

original audio *1

“PCM” *2

/“Off”

BD-Video :

7.1ch PCM *1

DVD-Video :

5.1ch PCM

*4

*1

*2

*3

*4

When “BD-Video Secondary Audio” is set to “On”, the audio will be output as Dolby Digital, DTS Digital

Surround TM or 5.1ch PCM.

The maximum possible number of Dolby sound is 2ch

PCM.

When “DTS Neo:6” is set to “Cinema” or “Music”, 2ch

(2.1ch) audio can be expanded to 7ch (7.1ch) and output.

( > 26)

For “DSD Output Mode”

[BDT280] [BDT180]

Supported format for DLNA

≥ File formats that are not supported by your

DLNA server cannot be played.

Video

Container Video codec Audio codec

Example of file extension

MKV

Xvid*

AVCHD

MP4

PS

TS

H.264

H.264

MPEG2

MPEG2

H.264

AAC

DTS ®

PCM

Vorbis

FLAC

MPEG-4

Advanced

Simple Profile

(ASP)

MP3

Dolby Digital

Dolby Digital

AAC

Dolby Digital

Linear PCM

AAC

Dolby Digital

.mkv

.avi

.mts

.mp4, .mov

.mpg, .mpeg

.m2ts, .ts

Photo

Format

JPEG

Example of file extension

.jpg

Audio

Audio codec

MP3

FLAC

WAV

AAC

WMA

ALAC

DSD

Linear PCM

Example of file extension

.mp3

.flac

.wav

.m4a

.wma

.m4a

.dsf, .dff

* Only when the file is transcoded by DLNA server.

- 35 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 36 ページ 2020年4月13日 月曜日 午後4時23分

Display languages list

Display Language Display Language Display Language

ENG

FRA

DEU

ITA

ESP

NLD

SVE

NOR

DAN

POR

RUS

English

French

German

Italian

Spanish

Dutch

Swedish

Norwegian

Danish

Portuguese

Russian

JPN

CHI

KOR

MAL

VIE

THA

POL

CES

SLK

HUN

FIN

Japanese

Chinese

Korean

Malay

Vietnamese

Thai

Polish

Czech

Slovak

Hungarian

Finnish

ARA

HIN

PER

IND

MRI

BUL

RUM

GRE

TUR

Arabic

Hindi

Persian

Indonesian

Maori

Bulgarian

Romanian

Greek

Turkish

Others

Language code list

Language Code Language Code Language Code

Abkhazian: 6566

Afar: 6565

Afrikaans: 6570

Albanian: 8381

Amharic: 6577

Arabic: 6582

Armenian: 7289

Assamese: 6583

Aymara: 6589

Azerbaijani: 6590

Bashkir: 6665

Basque: 6985

Bengali; Bangla:

6678

Bhutani: 6890

Bihari: 6672

Breton: 6682

Bulgarian: 6671

Burmese: 7789

Byelorussian: 6669

Cambodian: 7577

Catalan: 6765

Chinese: 9072

Corsican: 6779

Croatian: 7282

Czech: 6783

Danish: 6865

Dutch: 7876

English: 6978

Esperanto: 6979

Estonian: 6984

Faroese: 7079

Fiji: 7074

Finnish: 7073

French: 7082

Frisian: 7089

Galician: 7176

Georgian: 7565

German: 6869

Greek: 6976

Greenlandic: 7576

Guarani: 7178

Gujarati: 7185

Hausa: 7265

Hebrew: 7387

Hindi: 7273

Hungarian: 7285

Icelandic: 7383

Indonesian: 7378

Interlingua: 7365

Irish: 7165

Italian: 7384

Japanese: 7465

Javanese: 7487

Kannada: 7578

Kashmiri: 7583

Kazakh: 7575

Kirghiz: 7589

Korean: 7579

Kurdish: 7585

Laotian: 7679

Latin: 7665

Latvian, Lettish: 7686

Lingala: 7678

Lithuanian: 7684

Macedonian: 7775

Malagasy: 7771

Malay: 7783

Malayalam: 7776

Maltese: 7784

Maori: 7773

Marathi: 7782

Moldavian: 7779

Mongolian: 7778

Nauru: 7865

Nepali: 7869

Norwegian: 7879

Oriya: 7982

Pashto, Pushto: 8083

Persian: 7065

Polish: 8076

Portuguese: 8084

Punjabi: 8065

Quechua: 8185

Rhaeto-Romance:

8277

Romanian: 8279

Russian: 8285

Samoan: 8377

Sanskrit: 8365

Scots Gaelic: 7168

Serbian: 8382

Serbo-Croatian: 8372

Shona: 8378

Sindhi: 8368

Singhalese: 8373

Slovak: 8375

Slovenian: 8376

Somali: 8379

Spanish: 6983

Sundanese: 8385

Swahili: 8387

Swedish: 8386

Tagalog: 8476

Tajik: 8471

Tamil: 8465

Tatar: 8484

Telugu: 8469

Thai: 8472

Tibetan: 6679

Tigrinya: 8473

Tonga: 8479

Turkish: 8482

Turkmen: 8475

Twi: 8487

Ukrainian: 8575

Urdu: 8582

Uzbek: 8590

Vietnamese: 8673

Volapük: 8679

Welsh: 6789

Wolof: 8779

Xhosa: 8872

Yiddish: 7473

Yoruba: 8979

Zulu: 9085

Reference

“AVCHD” is a trademark of Panasonic Corporation and Sony

Corporation.

Java is a registered trademark of Oracle and/or its affiliates.

Dolby, Dolby Audio, and the double-D symbol are trademarks of

Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS,Inc. DTS, the Symbol, DTS and the Symbol together, DTS-HD, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing, LLC in the United States and other countries.

<AVC>

This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the

AVC Standard ("AVC Video") and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC

Video. No license is granted or shall be implied for any other use.

Additional information may be obtained from MPEG LA, L.L.C.

See http://www.mpegla.com

<VC-1>

This product is licensed under the VC-1 Patent Portfolio License for the personal and non-commercial use of a consumer to (i) encode video in compliance with the VC-1 Standard ("VC-1

Video") and/or (ii) decode VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide

VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA,

L.L.C.

See http://www.mpegla.com

MPEG Layer-3 audio coding technology licensed from Fraunhofer

IIS and Thomson.

“DVD Logo” is a trademark of DVD Format/Logo Licensing

Corporation.

The Wi-Fi CERTIFIED TM Logo is a certification mark of Wi-Fi

Alliance ® .

The Wi-Fi Protected Setup TM of Wi-Fi Alliance ® .

Identifier mark is a certification mark

“Wi-Fi ® ” and “Wi-Fi Direct ® ” are registered trademarks of Wi-Fi

Alliance ® .

“Wi-Fi Protected Setup TM ”, “Miracast TM ”, “WPA TM ”, and “WPA2 TM ” are trademarks of Wi-Fi Alliance ® .

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network

Alliance.

Windows is a trademark or a registered trademark of Microsoft

Corporation in the United States and other countries.

Android is a trademark of Google Inc.

Copyright 2004-2014 Verance Corporation. Cinavia TM is a Verance

Corporation trademark. Protected by U.S. Patent 7,369,677 and worldwide patents issued and pending under license from Verance

Corporation. All rights reserved.

This product incorporates the following software:

(1) the software developed independently by or for Panasonic

Corporation,

(2) the software owned by third party and licensed to Panasonic

Corporation,

(3) the software licensed under the GNU General Public License,

Version 2.0 (GPL V2.0),

(4) the software licensed under the GNU LESSER General Public

License, Version 2.1 (LGPL V2.1), and/or

(5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.

- 36 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 37 ページ 2020年4月13日 月曜日 午後4時23分

The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS

FOR A PARTICULAR PURPOSE. Please refer to the detailed terms and conditions thereof shown in the Player Settings menu.

At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other licenses with the obligation to do so, as well as the respective copyright notice thereof.

Contact Information: [email protected]

The source code and the copyright notice are also available for free in our website below.

http://panasonic.net/avc/oss/

David M. Gay’s dtoa and strtod license

The author of this software is David M. Gay.

Copyright (c) 1991, 2000, 2001 by Lucent Technologies.

Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software.

THIS SOFTWARE IS BEING PROVIDED “AS IS”, WITHOUT ANY

EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR,

NEITHER THE AUTHOR NOR LUCENT MAKES ANY

REPRESENTATION OR WARRANTY OF ANY KIND

CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE

OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.

“UNICODE, INC. LICENSE AGREEMENT - DATA FILES AND

SOFTWARE

Unicode Data Files include all data files under the directories http://www.unicode.org/Public/, http://www.unicode.org/reports/, and http://www.unicode.org/cldr/data/.

Unicode Software includes any source code published in the

Unicode Standard or under the directories http://www.unicode.org/Public/, http://www.unicode.org/reports/, and http://www.unicode.org/cldr/data/.

NOTICE TO USER: Carefully read the following legal agreement.

BY DOWNLOADING, INSTALLING, COPYING OR OTHERWISE

USING UNICODE INC.’S DATA FILES (““DATA FILES””), AND/OR

SOFTWARE (““SOFTWARE””), YOU UNEQUIVOCALLY

ACCEPT, AND AGREE TO BE BOUND BY, ALL OF THE TERMS

AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT

AGREE, DO NOT DOWNLOAD, INSTALL, COPY, DISTRIBUTE

OR USE THE DATA FILES OR SOFTWARE.

COPYRIGHT AND PERMISSION NOTICE

Copyright (c) 1991-2009 Unicode, Inc. All rights reserved.

Distributed under the Terms of Use in http://www.unicode.org/copyright.html.

Permission is hereby granted, free of charge, to any person obtaining a copy of the Unicode data files and any associated documentation (the ““Data Files””) or Unicode software and any associated documentation (the ““Software””) to deal in the Data

Files or Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Data Files or Software, and to permit persons to whom the Data Files or Software are furnished to do so, provided that (a) the above copyright notice(s) and this permission notice appear with all copies of the Data Files or Software, (b) both the above copyright notice(s) and this permission notice appear in associated documentation, and (c) there is clear notice in each modified Data File or in the Software as well as in the documentation associated with the Data File(s) or Software that the data or software has been modified.

Reference

THE DATA FILES AND SOFTWARE ARE PROVIDED ““AS IS””,

WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO

EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS

INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR

ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES,

OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS

OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF

CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,

ARISING OUT OF OR IN CONNECTION WITH THE USE OR

PERFORMANCE OF THE DATA FILES OR SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in these Data Files or Software without prior written authorization of the copyright holder.”

(1) MS/WMA

This product is protected by certain intellectual property rights of

Microsoft Corporation and third parties. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary and third parties.

(2) MS/PlayReady/Final Product Labeling

This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.

(3) MS/PlayReady/End User Notices

Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content.

Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

(4) FLAC, WPA Supplicant

The software licenses are displayed when “Software Licence” in

the Setup menu is selected. ( > 29)

- 37 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 38 ページ 2020年4月13日 月曜日 午後4時23分

Reference

[For_Australia]

Panasonic Warranty

1. Subject to the condions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product, without charge for parts or labour, if in the opinion of Panasonic the product is found to have a manufacturing defect within one

(1) year or (12 months) (the “warranty period”) from the date of purchase appearing on your purchase receipt.

3.

Dealers, and only where the products are used and serviced within Australia or its territories. Warranty cover only applies to the services that are carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when the warranty service is requested.

This warranty only applies if the product has been installed and/or used in accordance with the manufacturer’s recommendaons (as noted in the operang instrucons) under normal use and reasonable care (in the opinion of Panasonic). The warranty does not cover damage, malfuncon or failure resulng from use of incorrect voltages, incorrect installaon, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm acvity, infestaon by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alteraons), exposure to abnormally corrosive condions, or any foreign object or maer having entered the product.

4. This warranty does not cover the following items unless the fault or defect existed at the me of purchase:

(a) Consumable parts

(b) Cosmec parts

(c) Worn or damaged parts

(d) Informaon stored on Hard Disk Drives, Opcal Discs, USB Devices, SD Cards, Tapes

(e) DTV recepon issues caused by TV Aerial / Cabling / Wall socket(s)

5. Some products may be supplied with Ethernet connecon hardware. The warranty is limited on such products and will not cover:

(a) Internet and or DLNA connecon / setup related problems

(b) Access fees and or charges incurred for internet connecon

(c) Incompable soware or soware not specifically spulated in the product operaons manual; and

(d) Any indirect or consequenal costs associated with the incorrect use or misuse of the hardware, its connecon to the internet or any

other device.

6. To claim warranty service, when required, you should:

• Contact Panasonic’s Customer Care Centre on 132 600 for Service Centre informaon.

• Confirm the opening and acceptance mes with the Authorised Service centre that you choose.

• Then send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt.

• Any freight and insurance costs associated with the transport of the product to and/or from your nearest Authorised Service Centre must

be arranged and paid for by you.

7.

The warranes hereby conferred do not extend to, and exclude, any costs associated with the installaon, de-installaon or re-installaon of a product, including costs related to the mounng, de-mounng or remounng of any screen, (and any other ancillary acvies), delivery, handling, freighng, transportaon or insurance of the product or any part thereof or replacement of and do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related to such installaon, de-installaon, re-installaon or transit.

Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however, coverage will vary dependant on product. For advice on exact Authorised Service Centre locaons for your product, please telephone our Customer Care

Centre on 132600 or visit our website and use the Service Centre Locator.

In addion to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the

Australian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have a refund or to have the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are also entled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a major failure.

If there is a major failure in regard to the product which cannot be remedied then you must nofy us within a reasonable period by contacng the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair or replace the product and will do so in a reasonable period of me from receiving noce from you.

THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)

SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES

If you require assistance regarding warranty condions or any other enquiries, please visit the Panasonic

Australia website

www.panasonic.com.au

or contact by phone on

132 600

If phoning in, please ensure you have your operang instrucons available.

Panasonic Australia Pty. Limited

ACN 001 592 187 ABN 83 001 592 187

1 Innovation Road, Macquarie Park NSW 2113 www.panasonic.com.au

PRO-031-F11 Issue: 5.0 23-01-2018

- 38 -

DMP-BDT280&180_EBGNGAGH-SQW0349.book 39 ページ 2020年4月13日 月曜日 午後4時23分

[For_the_United_Kingdom_and_Ireland_customers]

Sales and Support Information

Customer Communications Centre

≥ For customers within the UK: 0344 844 3899

≥ For customers within Ireland: 01 289 8333

≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays).

≥ For further support on your product, please visit our website: www.panasonic.co.uk

Direct Sales at Panasonic UK

≥ Order accessory and consumable items for your product with ease and confidence by phoning our

Customer Communications Centre Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays).

≥ Or go on line through our Internet Accessory ordering application at www.pas-europe.com.

≥ Most major credit and debit cards accepted.

≥ All enquiries transactions and distribution facilities are provided directly by Panasonic UK.

≥ It couldn’t be simpler!

≥ Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our website for further details.

(Inside of product)

[BDT280] [BDT180]

[BDT167] [BD84]

(Back of product)

Manufactured by:

Importer for Europe:

Panasonic Corporation

Kadoma, Osaka, Japan

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Panasonic Corporation

Web Site: http://www.panasonic.com

C Panasonic Corporation 2015

EU p

SQW0628-2

F1215BD2040

VQT3B63

F0617HA0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals