Samsung BD-ES5000 BD-ES5000 Blu-ray & DVDPlayer User manual

Below you will find brief information for BD-ES5000. This Blu-ray Disc player supports high-quality HD video playback from Blu-ray Discs and DVDs. You can enjoy features like BD-LIVE content via a network connection and stream media (videos, music, photos) from devices on your network using AllShare. The player also supports playing multimedia files (MP3, JPEG, DivX, etc.) from your USB storage device.

PDF

Document

BD-ES5000

Blu-ray ™ Disc Player user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at

www.samsung.com/register

ENGLISH

Key features

Blu-ray Disc Features Blu-ray Disc Player Features

Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no compromise on video quality.

The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below.

Video highlights

The BD-ROM format supports three highly advanced video codecs, including AVC, VC-1 and MPEG-2.

HD video resolutions are also supported:

• 1920 x 1080 High Definition

• 1280 x 720 High Definition

For High-Definition Playback

To view high-definition contents on a Blu-ray Disc, you need an HDTV (High Definition Television).

Some Blu-ray Discs may require you to use the player’s HDMI OUT to view high-definition content.

The ability to view high-definition content on

Blu-ray Discs may be limited depending on the resolution of your TV.

BD-LIVE

You can use a Blu-ray Disc that supports

BD-LIVE to download content provided by the disc manufacturer through a network connection.

AllShare

You can play videos, music, and photos saved on your devices (such as your PC or

NAS [Network-Attached Storage]) through a network connection.

Playing multimedia files

You can use the USB connection to play various kinds of multimedia files (MP3, JPEG,

DivX, etc.) located on a USB storage device.

Safety Information

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lighting flash and Arrowhead within the triangle is a warning sign alerting you of dangerous voltage inside the product.

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The explanation point within the triangle is a warning sign alerting you of important instructions accompanying the product.

Do not install this equipment in a confined space such as a bookcase or similar unit.

WARNING

To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.

CAUTION

Blu-ray Disc Player USES AN INVISIBLE

LASER BEAM WHICH CAN CAUSE

HAZARDOUS RADIATION EXPOSURE IF

DIRECTED. BE SURE TO OPERATE Blu-ray

Disc Player CORRECTLY AS INSTRUCTED.

CLASS 1 LASER product

This Compact Disc player is classified as a

CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE

LASER RADIATION WHEN OPEN. AVOID

EXPOSURE TO THE BEAM (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN COVER AND

DO NOT REPAIR YOURSELF. REFER

SERVICING TO QUALIFIED PERSONNEL.

CLASS 1

KLASSE 1

KLASS 1

LASER PRODUCT

LASER PRODUKT

LUOKAN 1 LASER LAITE

LASER APPARAT

PRODUCTO LÁSER CLASE 1

This product satisfies CE regulations when shielded cables and connectors are used to connect the unit to other equipment.

To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

IMPORTANT NOTE

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug.

If it requires replacing, a fuse approved to

BS1362 of the same rating must be used.

Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.

Replacement covers are available from your dealer.

If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.

However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains jack, as there is a risk of shock hazard from the bared flexible cord.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.

Precautions

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below.

Keep these operating instructions handy for future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Disc Storage & Management

Disc Handling

Disc Shape

• Use discs with regular shapes. If you use an irregular disc

(a disc with a special shape), you can damage the player.

Holding discs

• Avoid touching the surface of a disc where data has been recorded.

Blu-ray Discs

• Do not leave a Blu-ray Disc in the player for long periods of time. Remove the Blu-ray

Disc from the player and store it in its case.

• Be careful not to scratch or leave fingerprints on the surface of the Blu-ray

Disc.

DVD-VIDEO, Audio CD (CD-DA)

• Wipe off dirt or contamination on the disc with a soft cloth.

Disc Storage

Be careful not to damage the disc because the data on these discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Store vertically.

• Keep in a clean, protective jacket.

• If you move your player suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the player, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

Handling Cautions

• Do not write on the printed side with a ballpoint pen or pencil.

• Do not use record cleaning sprays or antistatic sprays to clean discs. Also, do not use volatile chemicals, such as benzene or thinner.

• Do not apply labels or stickers to discs.

(Do not use discs fixed with exposed tape adhesive or leftover peeled-off stickers.)

• Do not use scratch-proof protectors or covers.

• Do not use discs printed on by label printers available on the market.

• Do not load warped or cracked discs.

• Before connecting other components to this player, be sure to turn them off.

• Do not move the player while it is playing a disc. The disc can be scratched or damaged and the player’s internal parts can be damaged.

• Do not put a flower vase filled with water or any small metal objects on the player.

• Be careful not to put your hand into the disc slot.

• Do not place anything other than the disc in the disc slot.

• Interference from exterior sources such as lightening and static electricity can affect the normal operation of this player. If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally.

• Be sure to remove the disc and turn off the player after use.

• Disconnect the AC power cord from the

AC outlet when you don’t intend to use the player for long periods of time.

• To clean a disc, wipe it in a straight line from the inside to the outside of the disc.

• Do not expose the player to any liquid.

• When the AC plug is connected to a wall outlet, the player will still draw power

(standby mode) when it is turned off.

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

• The main plug is used as a disconnect device and shall stay readily operable at any time.

• Do not touch the power plug with a wet hand.

Otherwise, it can cause an electric shock.

• Do not share one power socket with multiple electric devices. Otherwise, it may cause an overheat, resulting in a fire.

• If you encounter an abnormal noise, burning smell or smoke, turn off the power switch immediately and disconnect the power plug from the wall outlet. Then, contact the nearest customer centre for technical assistance.

If you still use the product as it is, this may cause an electric shock or fire.

Maintenance of Cabinet

Before you clean the Blu-ray Disc’s cabinet, be sure to disconnect the AC power cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for cleaning.

• Wipe the cabinet with a soft cloth.

Restrictions on Playback

• This player may not respond to all operating commands because some Blu-ray Disc,

DVD, and CD discs allow specific or limited operation and provide only certain features during playback.

Please note that this is not a defect in the player.

• Samsung cannot guarantee that this player will play every disc bearing the Blu-ray

Disc, DVD or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray

Disc, DVD, and CD software and/or the manufacture of discs.

Please contact the SAMSUNG customer care centre if you have questions or encounter difficulty in playing Blu-ray Disc,

DVD, or CD discs in this player. Also, refer to rest of this user manual for additional information on playback restrictions.

KEy FEATURES

Blu-ray Disc Features...................................

Blu-ray Disc Player Features ........................

SAFETy INFORMATION

Warning .......................................................

Precautions .................................................

Disc Storage & Management .......................

GETTING STARTED

Before using the User Manual ......................

Accessories .................................................

Front Panel ..................................................

Rear Panel ...................................................

Remote Control ...........................................

CONNECTIONS

A. Connecting to a TV .................................

B. Connecting to an Audio System ............

C. Connecting to a Network ......................

SETUP

The Initial Settings Procedure.....................

Menu Navigation ........................................

Accessing the Settings Menu ....................

Display ......................................................

Audio .........................................................

Network ....................................................

System ......................................................

Language ..................................................

Security .....................................................

General ......................................................

Support .....................................................

BASIC FUNCTIONS

Playing a Video ..............................................

Using the Disc Menu/Title Menu/

Popup Menu..................................................

Using the Search and Skip Functions ............

Slow Motion Play/Step Motion Play ...............

Using the TOOLS button ...............................

Listening to Music..........................................

Playing back Pictures ....................................

Playing back a USB Storage Device ..............

NETWORK SERVICES

BD-LIVE™ .................................................

Using the AllShare Function .......................

APPENDIx

Troubleshooting .........................................

Specifications ............................................

Getting Started

Before using the User Manual

Disc Types and Contents your player can play

Disc types your player cannot play

• HD DVD

• DVD-ROM/PD/MV-

Disc, etc

• DVD-RAM

• Super Audio CD

(except CD layer)

• DVD-RW(VR mode)

• CVD/CD-ROM/CDV/

CD-G/CD-I/LD

(CD-Gs play audio only, not graphics.)

• 3.9 GB DVD-R Disc for

Authoring.

Content

VIDEO

Logo Icon h z

�

Definition

Indicates a function available on a BD-ROM or BD-RE/-R disc recorded in the BD-RE format.

Indicates a function available on a DVD-VIDEO or recorded

DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized.

MUSIC

PHOTO

-

� o

�

Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD-

RE/-R disc or in a USB storage media containing DivX, MKV, MP4 contents.

Indicates a function available on an audio CD-RW/-R (CD-DA format).

Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD-

RE/-R disc or in a USB storage media containing MP3 or WMA contents.

Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD-

RE/-R disc or in a USB storage media containing JPEG contents.

✎ NOTE

▪ The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

▪ If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.

▪ Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.

▪ Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds

25 Mbps.

✎ NOTE

▪ Some commercial discs and DVDs discs purchased outside your region may not play on this player.

▪ Playback may not work for some types of discs, or when you use specific operations, such as angle change and aspect ratio adjustment.

Information about the discs is written in detail on the disc box. Please refer to this if necessary.

▪ Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for playback.

▪ When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.

▪ This player may not respond to all operating commands because some Blu-ray Disc, DVD, and

CD discs allow specific or limited operation and provide only certain features during playback.

Please note that this is not a defect in the player.

▪ Samsung cannot guarantee that this player will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the manufacture of discs.

Please contact the SAMSUNG customer care centre if you have questions or encounter difficulty when playing Blu-ray Disc, DVD, or CD discs in this player. Also, refer to rest of this user manual for additional information on playback restrictions.

Blu-ray Disc Compatibility

Blu-ray Disc is a new and evolving format.

Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Compliance and

Compatibility Notice section of this user manual.

Disc Types

BD-ROM

Blu-ray ROM discs can only be played back.

This player can play back pre-recorded commercial BD-ROM discs.

BD-RE/-R

Blu-ray RE/-R discs can be recorded on and played back.

This player can play back a BD-RE/-R disc recorded by other compatible Blu-ray Disc recorders.

DVD-VIDEO

• This player can play back pre-recorded commercial DVDs (DVD-VIDEO discs) with movies.

• When switching from the first layer to the second layer of a dual-layered DVD-VIDEO disc, there may be momentary distortion in the image and sound. This is not a malfunction of the player.

DVD-RW/-R/+R

This player can play back a DVD-RW/-R/+R disc recorded and finalized with a DVD video recorder. The ability to play back may depend on recording conditions.

DVD+RW

• This player can play back a DVD+RW disc recorded with a DVD Video recorder.

The ability to play back may depend on recording conditions.

Audio CD (CD-DA)

• This player can play back CD-DA format audio CD-RW/-R discs.

• The player may not be able to play some

CD-RW/-R discs due to the condition of the recording.

CD-RW/-R

• Use a 700MB (80 minute) CD-RW/-R disc.

If possible, do not use an 800MB (90 minute) or larger disc, as the disc may not play back.

• If the CD-RW/-R disc was not recorded as a closed session, you may experience delays when playing back the beginning of the disc or all recorded files may not play.

• Some CD-RW/-R discs may not play on this player, depending on the device which was used to burn them. For contents recorded on CD-RW/-R media from CDs for your personal use, playability may vary depending on the contents and discs.

AVCHD (Advanced Video Codec High

Definition)

• This player can play back AVCHD format discs. These discs are normally recorded and used in camcorders.

• The AVCHD format is a high definition digital video camera format.

• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format.

• Some AVCHD discs use the “x.v.Color” format. This player can play back AVCHD discs that use “x.v.Color” format.

• “x.v.Color” is a trademark of Sony

Corporation.

• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic

Industrial Co., Ltd. and Sony Corporation.

✎ NOTE

▪ Some AVCHD format discs may not play, depending on the recording condition.

AVCHD format discs need to be finalized.

▪ “x.v.Color” offers a wider color range than normal DVD camcorder discs.

▪ Some DivX, MKV and MP4 format discs may not play, depending on the video resolution and frame rate condition.

Blu-ray

Disc

DVD-VIDEO

Region Code

Both players and discs are coded by region.

These regional codes must match for a disc to play. If the codes do not match, the disc will not play.

The Region Code for this player is displayed on the rear panel of the player.

Copyright

Area

America, South America,

Kong and South East Asia.

Europe, Greenland, French territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central and South Asia.

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle

East, Egypt, South Africa,

Greenland

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Caribbean

Russia, Eastern Europe, India, most of Africa, North Korea,

Mongolia

6 China

Samsung Electronics Co.,Ltd.

Supported File Formats

Notes on the USB connection

• Your player supports USB storage media,

MP3 players, digital cameras, and USB card readers.

• The player does not support folder or file names longer than 128 characters.

• Some USB/External HDD/digital camera devices may not be compatible with the player.

• Your player supports the FAT16, FAT32, and NTFS files systems.

• Connect USB devices directly to the player’s USB port. Connecting through a USB cable may cause compatibility problems.

• Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly.

• The player does not support the PTP protocol.

• Do not disconnect a USB device during a

“loading” process.

• The bigger the image resolution, the longer the image takes to display.

• This player cannot play MP3 files with DRM

(Digital Rights Management) downloaded from commercial sites.

• Your player only supports the video that is under 30fps (frame rate).

Video File Support

File Extension

*.avi

*.mkv

*.wmv

*.mp4

*.mpg

*.mpeg

Container

AVI

MKV

WMV (wmv9)

MP4

Video Codec

DivX 3.11/4.x/5.1/6.0

MP4v3

H.264 BP/MP/HP

VC-1 AP

DivX 5.1/6.0

H.264 BP/MP/HP

VC-1 AP

VC-1 SM

MP4 (mp4v)

H.264 BP/MP/HP

MPEG1

MPEG2

H.264 BP/MP/HP

Audio Codec

MP3

Dolby Digital

DTS

WMA

PCM

MP3

Dolby Digital

DTS

WMA

AAC

MP1, 2

Dolby Digital

DTS

Resolution

1920x1080

Music File Support

File Extension

*.mp3

*.wma

Container

Logos of Discs the player can play

Blu-ray Disc

MP3

WMA

Audio Codec

MP3

WMA

Accessories

Support Range

* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48

* Bit rates - All bit-rates from 5kbps to 384kbps

BD-LIVE

• Limitations

- Even when the file is encoded by a supported codec mentioned above, a file might not be played if its content has a problem.

- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.

- Files having higher Bit rate/frame rate than standard may stutter during sound/video playback.

- The Seek (skip) function is not available if the file’s index table is damaged.

• Video decoder

- Supports up to H.264 Level 4.1and AVCHD

- Does not support H.264 FMO/ASO/RS, VC1 SP/MP/AP L4

- MPEG4 SP, ASP :

Below 1280 x 720 : 60 frames max

Above 1280 x 720 : 30 frames max

- Does not support GMC 2 or higher

• Audio decoder

- Supports WMA 7, 8, 9 and STD

- Does not support WMA sampling rate of 22050Hz mono.

Check for the supplied accessories shown below.

Batteries for Remote Control

(AAA Size)

User Manual

Adapter

Quick Guide

PAL broadcast System in

U.K., France, Germany, etc

Remote Control

STOP BUTTON

POWER BUTTON

Front Panel

PLAY/PAUSE BUTTON

EJECT BUTTON

Rear Panel

REMOTE CONTROL SENSOR STANDBY INDICATOR

DISC SLOT

✎ NOTE

▪ When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the s button.

▪ Lights when this player is in Standby mode, and it flashes while a signal is being received from the remote control sensor.

USB HOST

HDMI OUT

LAN

DC 12V 2A

DIGITAL AUDIO OUT

✎ NOTE

▪ To upgrade the player's software through the USB Host jack, you must use a USB memory stick.

Tour of the Remote Control

Remote Control

Turn the player on and off.

Press to eject a disc.

Press numeric buttons to operate options.

Use to enter the disc menu.

Press to skip backwards or forwards.

Press to stop a disc.

Press to play a disc.

Use to access various audio functions on a disc (Blu-ray Disc/DVD).

Press to use Tools menu.

Return to the previous menu.

These buttons are used both for menus on the player and also several Blu-ray Disc functions.

Press to use the bonusview function.

Allows you to repeat A-B disc.

Installing batteries

Turn the TV on and off.

TV volume adjustment.

Use to enter the popup menu/title menu.

Press to search a disc backwards or forwards.

Press to pause a disc.

Press to move to the home menu.

Press to switch the Blu-ray Disc/DVD’s subtitle language.

Use to display the playback information when playing a Blu-ray Disc/DVDs.

Press to exit the menu.

Press to see the full screen on a TV.

Allows you to repeat a title, chapter, track or disc.

Connections

A. Connecting to a TV

Connecting to a TV with an HDMI Cable - Best Quality

1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the

HDMI IN terminal of your TV. See page 11.

2. Turn on the player and TV.

3. Press the input selector on your TV remote control until the HDMI signal from the player appears on your TV screen.

✎ NOTE

▪ An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.

▪ If the player is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2) HDMI cable.

▪ HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

▪ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

▪ When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output resolution will be automatically set to the highest supported by the TV.

▪ A long HDMI cable may cause screen noise. If this occurs, set Deep Colour to Off in the menu.

▪ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio

Out to an audio system to hear audio.

✎ NOTE

▪ If the remote does not operate properly:

• Check if the batteries are drained.

• Check if there is any fluorescent lighting nearby.

CAUTION

▪ Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

B. Connecting to an Audio System

• Please turn the volume down when you turn on the AV receiver. A sudden loud sound may cause damage to the speakers and your ears.

• Please set the audio format according to the capabilities of your AV receiver.

• The position of HDMI input terminals may vary depending on your AV receiver. Please refer to the user manual of your AV receiver.

C. Connecting to a Network

This player lets you use network based services such as BD-LIVE and download software upgrades when it is connected to a network. We recommend using a Broadband modem (with integrated router) or IP router for the connection. For more information on router connections, refer to the user manual of the router or contact the router manufacturer for technical assistance.

Cable Network

Case 1 : Connecting to an Audio System (HDMI supported AV receiver) - Best Quality (Recommended)

1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the

HDMI IN terminal of your AV receiver. See page 11.

2. Using an HDMI cable, connect the HDMI OUT terminal of the AV receiver to the HDMI IN terminal of your TV.

3. Turn on the player, TV, and AV receiver.

4. Using the input select button of the AV receiver and TV, select the correct HDMI input or each to hear sound and see video from the player. Refer to your AV receiver’s user manual to set the AV receiver’s audio input.

1. Using a Direct LAN (UTP) CAT 5 cable, connect the LAN terminal of the player to the LAN terminal of your modem or router. See page 11

2. Set the network options. See page 16.

✎ NOTE

▪ Internet access to Samsung’s software update server may not be allowed, depending on the router you use or your ISP’s policy. For more information, contact your ISP (Internet Service Provider).

▪ DSL users, please use a router to make a network connection.

▪ To use the AllShare function, you must connect your PC to your network as shown in the figure.

The connection can be wired.

Case 2 : Connecting to an Audio System (AV receiver with Dolby

Digital or DTS decoder) - Better Quality

1. Using a optical cable, connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the player to the DIGITAL AUDIO IN (OPTICAL) terminal of your AV receiver. See page 11.

2. Using an HDMI cable, connect the HDMI terminal on the rear of the player to the HDMI terminal of your TV.

3. Turn on the player, TV, and AV receiver.

4. Press the input select button of the AV receiver to select the correct external input and hear sound from the player. Refer to your AV receiver’s user manual to set the AV receiver’s audio input.

5. Press the input selector on your TV remote control to select the HDMI video source.

Connecting to a TV

HDMI cable

(not included)

Network

Broadband modem (with integrated router)

Broadband service

Router

Broadband modem

Broadband service

Networking with PC for AllShare function

✎ NOTE : You can only connect this unit to a network via a wired connection.

Connecting to an Audio System

Case 1 : HDMI cable

(not included)

Case 1 : HDMI cable

(not included)

Case 2 : Optical cable

(not included)

Setup

The Initial Settings Procedure

1. Turn on your TV after connecting the player.

When you connect the player to a TV for the first time, the player turns on automatically and the Initial Settings screen appears.

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

English

Français

Deutsch

Español

Italiano

Nederlands

> Move " Select

2. Use the ▲▼ buttons on the remote to select the desired language, and then press the ENTER button.

3. Press the ENTER button to select Start .

4. Use the ▲▼ buttons to select an Aspect

Ratio, and then press the ENTER button.

5. Select Auto , and then press the ENTER button. If you do not have a home network, press the BLUE (D ) button on your remote. You will go directly to the

Home menu.

6. The Blu-ray player automatically verifies your wired network. When verification in complete, the screen displays “Your network is operating properly.” Press the

ENTER button.

7. The “Initial settings completed.” message appears, and then the Home screen appears.

If you Blu-ray player does not connect to your

network or you want to connect manually, go to

Network Setup on page 16.

✎ NOTE

▪ The Home menu will not appear if you do not configure the initial settings except as noted below.

▪ If you press the BLUE (D) button during network setup, you can access the Home menu even if the network setup is not completed yet.

▪ When you return to the Home menu, the full screen mode is cancelled automatically.

▪ If you want to display the Initial Setting screen again to make changes, press the STOP ( @ ) button on the front panel of the player for more than 5 seconds with no disc inserted. This resets the player to its default settings.

▪ If you want to use an Anynet+(HDMI-CEC) function, please follow the instructions below.

1) Connect the player to an Anynet+(HDMI-

CEC)-compliant Samsung TV using HDMI

Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in both the TV and the player.

3) Set the TV to the Initial Settings Procedure.

▪ If you leave the player in the stop mode for more than 5 minutes without using it, a screen saver will appear on your TV. If the player is left in the screen saver mode for more than 25 minutes, the power will automatically turn off.

Menu Navigation

HOME Button : Press to move to the Home menu.

RETURN Button : Return to the previous menu.

ENTER / DIRECTION Button :

Move the cursor or select an item.

Activate the currently selected item.

Confirm a setting.

EXIT Button : Press to exit the current menu.

• Home Menu

Videos

No Disc a Change Device

YouTube d View Devices " Enter

Selects Videos.

Selects YouTube.

3 Selects Photos.

4 Selects Music.

5 Selects Settings.

Displays the buttons you can use on the remote to access functions.

Accessing the Settings Menu

To access the Settings menu and sub-menus, follow these steps:

1. Press the POWER button.

The Home Menu appears.

2. Press the ◄► buttons to select Settings , and then press the ENTER button.

3. Press the ▲▼ buttons to select the desired submenu, and then press the

ENTER button.

4. Press the ▲▼ buttons to select the desired item, and then press the ENTER button.

5. Press the ExIT button to exit the menu.

✎ NOTE

▪ The access steps may differ depending on the menu you selected. The OSD (On Screen Display) may change in this player after you upgrade the software version.

Display

You can configure various display options such as the TV Aspect Ratio, Resolution, etc.

TV Aspect Ratio

Depending on the type of television you have, you may want to adjust the screen size setting.

• 16:9 Original : Select when you connect the player to a 16:9 TV screen. The player will display all content in its original aspect ratio.

Content formatted in 4:3 will be displayed with black bars on the left and right.

• 16:9 Full : Select when you connect the player to a 16:9 TV screen. All content will fill the full screen. Content formatted in 4:3 will be stretched.

• 4:3 Letter Box : Select when you connect the player to a 4:3 TV screen. The player will display all content in its original aspect ratio.

Content formatted in 16:9 will be displayed with black bars on the top and bottom.

• 4:3 Pan-Scan : Select when you connect the player to a 4:3 TV screen. 16:9 content will have the extreme left and right portions cut off.

✎ NOTE

▪ Depending on the disc type, some aspect ratios may not be available.

▪ If you select an aspect ratio and option which is different than the aspect ratio of your TV screen, then the picture might appear to be distorted.

▪ If you select the 4:3 Pan-Scan or 4:3 Letter

Box, pressing the FULL SCREEN button on the remote will not bring up a full screen picture.

▪ If you select the 16:9 Original, your TV may display 4:3 Pillar-box (black bars on sides of picture). If this occurs, pressing the FULL

SCREEN button on the remote will not bring up a full screen picture.

BD Wise (Samsung Players only)

BD Wise is Samsung’s latest inter-connectivity feature.

When you connect a Samsung player and a

Samsung TV with BD Wise to each other via

HDMI, and BD Wise is on in both the player and

TV, the player outputs video at the video resolution and frame rate of the Blu-ray Disc/DVDs.

• Off : The output resolution stays fixed at the resolution you set previously in the

Resolution menu, regardless of the resolution of the disc.

• On : The player outputs video at the original resolution and frame rate of the Blu-ray

Disc/DVDs.

✎ NOTE

▪ When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise appears in the Resolution menu.

▪ If the player is connected to a device that does not support BD Wise, you can not use the BD

Wise function.

▪ For proper operation of BD Wise, set the BD Wise menu of both the player and the TV to On .

Resolution

Lets you set the output resolution of the HDMI video signal to Auto, 1080p, 1080i, 720p or

576p/480p. The number indicates the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively.

The more lines, the higher the quality.

• Auto : Automatically sets the output resolution to the connected TV’s maximum resolution.

• BD Wise : Automatically sets the resolution to the resolution of the Blu-ray Disc/DVDs if you have connected the player via HDMI to a TV with the BD Wise feature. (The BD

Wise menu item appears only if BD Wise is set to On . See BD Wise above.)

• DVD playback

Setup

BD Wise

Auto

1080p

1080i

720p

576p/480p

Output

• 1080p : Outputs 1080 lines of progressive video.

• 1080i : Outputs 1080 lines of interlaced video.

• 720p : Outputs 720 lines of progressive video.

• 576p/480p : Outputs 576/480 lines of progressive video.

Resolution according to the output mode

• Blu-ray Disc/E-contents/Digital Contents playback

Setup

Output

Blu-ray Disc

Resolution of Blu-ray Disc

HDMI / connected

HDMI Mode

Max. Resolution of TV input

E-contents/Digital contents

1080p

Max. Resolution of TV input

BD Wise

Auto

1080p@60F

(Movie Frame : Off)

Movie Frame : Auto

(24Fs)

1080i

720p

576p/480p

1080p@60F

1080p@24F

1080i

720p

576p/480p

1080p@60F

1080p@24F

1080i

720p

576p/480p

HDMI / connected

HDMI Mode

576i/480i

Max. Resolution of TV input

1080p

1080i

720p

576p/480p

✎ NOTE

▪ If the TV you connected to the player does not support Movie Frame or the resolution you selected, the message “If no pictures are shown after selecting ‘Yes’, please wait for 15 seconds to return to the previous resolution. Do you want to change the resolution?” appears. If you select

Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.

▪ If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the STOP ( @ ) button on the front of the player for more than 5 seconds. All settings are restored to the factory default. Follow the steps on the previous page to access each mode and select the Display Setup that your TV will support.

▪ When the factory default settings are restored, all stored user BD data is deleted.

▪ The Blu-ray Disc must have the 24 frame feature for the player to use the Movie Frame (24Fs) mode.

Movie Frame (24 Fs)

Setting the Movie Frame (24Fs) feature to Auto allows you to adjust the player’s HDMI output to

24 frames per second for improved picture quality.

You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate.

You can select Movie Frame only when the player is in the HDMI 1080i or 1080p output resolution modes.

• Auto : Movie Frame (24Fs) functions work.

• Off : Movie Frame (24Fs) functions are off.

HDMI Colour Format

Lets you set the colour space format for

HDMI output to match the capabilities of the connected device (TV, monitor, etc).

• Auto : Automatically sets the player to the optimum format supported by your device.

• yCbCr (4:4:4) : If your TV supports the

YCbCr colour space via HDMI, select this to output the normal YCbCr colour gamut.

• RGB (Standard) : Select to output the normal RGB colour gamut.

• RGB (Enhanced) : If you have connected the player to a DVI display device such as a monitor, select this to output the enhanced

RGB colour gamut.

Digital Output

Set the Digital Output to match the capabilities of the AV receiver you’ve connected to the player :

• PCM : This is the default setting. It is compatible with most TVs and receivers.

Digital Output Selection

Setting

Connection

PCM

Audio

PCM

HDMI supported

AV receiver

Up to PCM

7.1ch

Optical

PCM 2ch

• Bitstream (Unprocessed) : Choose if you want your receiver to decode all the audio.

Bonusview audio will not be available.

• Bitstream (Re-encoded DTS) : The original audio will be re-encoded into DTS.

• Bitstream (Re-encoded Dolby D) : The original audio will be re-encoded into Dolby

Digital

For more details, please refer to the Digital

Output Selection table .

Bitstream

(Unprocessed)

HDMI supported

AV receiver

PCM

Optical

Bitstream

(Re-encoded

DTS)

HDMI supported

AV receiver or

Optical

Bitstream

(Re-encoded

Dolby D)

HDMI supported

AV receiver or

Optical

HDMI Deep Colour

Lets you output video from the HDMI OUT jack with Deep Colour. Deep Colour provides more accurate colour reproduction with greater colour depth.

• Auto : The player outputs video with Deep

Colour to a connected TV which supports

HDMI Deep Colour.

• Off : The picture is output without Deep

Colour.

Progressive Mode

Lets you improve picture quality when viewing

DVDs.

• Auto : Select to have the player automatically select the best picture quality for the DVD you’re watching.

• Video : Select for the best picture quality from concert or TV show DVDs.

Audio

Stream on

Blu-ray

Disc

Dolby Digital

Plus

DTS PCM 2ch PCM 2ch

DTS-HD

HRA

PCM 2ch PCM 2ch

DTS

DTS-HD

HRA

DTS

DTS-HD MA PCM 2ch PCM 2ch DTS-HD MA DTS

Audio

Stream on

DVD

PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch

Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital

DTS PCM 2ch PCM 2ch DTS DTS DTS DTS

Setup

Connection

Definition for Blu-ray

Disc

Any

PCM

HDMI supported

AV receiver

Optical

Decodes the main feature audio and

BONUSVIEW audio stream together into

PCM audio and adds

Navigation Sound

Effects.

Bitstream

(Unprocessed)

HDMI supported

AV receiver

Optical

Bitstream

(Re-encoded

DTS)

HDMI supported

AV receiver or

Optical

Bitstream

(Re-encoded

Dolby D)

HDMI supported

AV receiver or

Optical

Outputs only the main feature audio stream so that your AV receiver can decode the audio bitstream.

You will not hear

BONUSVIEW audio or

Navigation Sound Effects.

Decodes the main feature audio and

BONUSVIEW audio stream together into

PCM audio and adds Navigation

Sound Effects, then re-encodes the PCM audio into DTS bitstream.

Decodes the main feature audio and

BONUSVIEW audio stream together into

PCM audio and adds Navigation

Sound Effects, then reencodes the

PCM audio into

Dolby digital bitstream or

PCM.

* If the Source Stream is 2ch, “Re-encoded Dolby D” Setting is not applied. Output will be

LPCM 2ch.

Blu-ray Discs may include three audio streams :

- Main Feature Audio : The audio soundtrack of the main feature.

- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.

- Navigation Sound Effects : When you choose a menu navigation selection, a

Navigation Sound Effect may sound.

Navigation Sound Effects are different on each Blu-ray Disc.

✎ NOTE

▪ Be sure to select the correct Digital Output or you will hear no sound or just loud noise.

▪ If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio signal outputs as PCM.

▪ Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.

▪ Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.

▪ This Digital Output setup does not affect the

HDMI audio output to your TV. It affects the optical and HDMI audio output when your player is connected to an AV receiver.

▪ If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital

Output selections (PCM or Bitstream).

PCM Downsampling

Lets you set 48kHz and 96kHz PCM downsampling on or off.

• Off : Select when the AV receiver connected to the player is 96kHz compatible.

• On : Select when the AV receiver connected to the player is not 96kHz compatible. 96kHz signals will be down converted to 48kHz.

✎ NOTE

▪ Even when PCM Downsampling is set to Off , some discs will only output downsampled audio through the optical digital outputs.

HDMI

• If your TV is not compatible with compressed multi-channel formats (Dolby

Digital, DTS), the player may output PCM

2ch downmixed audio even though you selected Bitstream (either Re-encoded or

Unprocessed) in the setup menu.

• If your TV is not compatible with PCM sampling rates over 48kHz, the player may output 48kHz downsampled PCM audio even though you set PCM Downsampling to Off .

Dynamic Range Control

You can listen at low volumes, but still hear dialog clearly.

This is only active if your player detects a

Dolby Digital signal.

• Auto : The Dynamic Range Control will be set automatically based on the information provided by the Dolby TrueHD Soundtrack.

• Off : You can enjoy the movie with the standard Dynamic Range.

• On : When Movie soundtracks are played at low volume or through smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

Downmixing Mode

Select Downmix method for stereo output.

• Normal Stereo : Downmix the multichannel audio into normal stereo. Choose this if you hear the sound from TV or Stereo Amplifier.

• Surround Compatible : Downmix the multichannel audio into surround compatible stereo. This mode helps your

AV Receiver to decode stereo into surround sound.

Network

Please contact your ISP to find out if your IP address is static or dynamic. If it is dynamic

- and most are - we recommend using the

Auto procedure for network setup. This is easiest and will work in the majority of cases.

If it is static, you must use the manual set up procedure.

Network setup directions start below.

✎ NOTE

▪ This unit can only be connected to a Network via a wired connection.

Automatic Network Setup

1. In the Home menu, press the ◄► buttons to select Settings , and then press the

ENTER button.

2. Press the ▲▼ buttons to select Network , and then press the ENTER button.

3. Press the ▲▼ buttons to select Wired

Network Settings , and then press the

ENTER button. The Wired Network

Settings screen appears.

Settings

Display

Audio

Network

Wired Network Settings

Internet Protocol Setup : Auto

System

Language

IP Address

Subnet Mask

: 0 0 0 0

0 0

Security

General

DNS

DNS Server

Support

> Move

: Auto

Select

Return

4. In the Internet Protocol Setup field, select

Auto if it is not selected. (Press ENTER select AUTO , and then press ENTER .)

5. The Auto Function acquires and fills in the values for IP Address , Subnet Mask , etc., automatically.

✎ NOTE

▪ This process can take up to five minutes.

6. After the Network Function has acquired the network values, press the RETURN button.

7. Select Network Test , and then press

ENTER to ensure the player has connected to your network.

8. When the Network Test is complete, press the RETURN twice to return to the Main

Menu.

9. If the Network Function does not acquire the network values, go to the directions for

Manual Setup.

Manual Network Setup

Before you start manual network setup, you need the network setting values.

To get the Network setting values through most Windows computers, follow these steps:

■ Windows xP

1. Right click the Network icon on the bottom right of the Windows desktop.

2. In the pop-up menu, click Status.

3. On the dialog that appears, click the

Support tab.

4. On the Support tab, click the Details button. The Network settings are displayed.

■ Windows 7

1. Click the Network icon on the bottom right of the Windows desktop.

2. In the pop-up menu, click Network and

Sharing Center.

3. On the dialog that appears, click the Local

Area Connection or Wireless Network

Connection depending on your network connection.

4. On the Support tab, click the Details button. The Network settings are displayed.

To enter the Network Settings into your player, follow these steps:

1. In the Home menu, press the ◄► buttons to select Settings , and then press the

ENTER button.

2. Press the ▲▼ buttons to select Network , and then press the ENTER button.

3. Press the ▲▼ buttons to select Wired

Network Settings , and then press the

ENTER button. The Wired Network

Settings screen appears.

4. Select the Internet Protocol Setup field, and then press the ENTER button.

5. Press the ▲▼ buttons to select Manual , and then press the ENTER button.

6. Press the ▼ button to go to the first entry field (IP Address).

7. Use the number buttons on your remote to enter numbers.

8. When done with each field, use the ► button to move to the next field. You can also use the other arrow buttons to move up, down, and back.

9. Enter the IP Address , Subnet Mask , and Gateway values in the same way.

10. Press the ▼ button to go to DNS .

11. Press the ▼ button to go to the first DNS entry field.

12. Enter the numbers as above.

13. Press the RETURN button on your remote.

14. Run a Network Test to ensure the player has connected to your network.

Network Test

Use this menu item to connect to the wired network or check whether your network connection is working or not.

Network Status

Use to check whether a connection to the network and the Internet have been established.

BD-Live Internet Connection

Set to allow or prohibit an Internet connection when you use the BD-LIVE service.

• Allow (All) : The Internet connection is allowed for all BD-LIVE contents.

• Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE contents containing a valid certificate.

• Prohibit : No Internet connection is allowed for any BD-LIVE content.

✎ NOTE

▪ What is a valid certificate?

When the player uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the player.

▪ The Internet connection may be restricted while you are using BD-LIVE contents.

System

Initial Settings

By using the Initial Settings function, you can set the language, Network Settings, etc.

For more information about the Initial Settings function, refer to the Initial Settings section of this user manual (page 12).

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that offers linked operations with other Samsung players that have the Anynet+ feature.

To operate this function, connect this player to an

Anynet+ Samsung TV with an HDMI cable.

With Anynet+ on, you can operate this player using a Samsung TV remote control and start disc playback simply by pressing the PLAy

( ) button on the TV’s remote control.

For more information, please see the TV user manual.

• Off : Anynet+ functions will not work.

• On : Anynet+ functions will work.

✎ NOTE

▪ This function is not available if the HDMI cable does not support CEC.

▪ If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.

▪ Depending on your TV, certain HDMI output resolutions may not work.

Please refer to the user manual of your TV.

BD Data Management

Enables you to manage the downloaded contents you accessed through a Blu-ray disc that supports the BD-LIVE service and stored on a flash drive.

You can check the device’s information including the storage size, delete the BD data, or change the Flash memory device .

BD Data Management Screen Information :

• Current Device : Display the connected device.

• Total Size : Total memory size of the device.

• Available Size : Available memory in the device.

• Delete BD Data : Delete all BD data in the storage.

• Change Device : Change desired flash memory to store BD data.

✎ NOTE

▪ In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback.

▪ Only those USB devices formatted in FAT file format (DOS 8.3 volume label) are supported.

We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster read/write speed.

▪ The Resume Play function may not work after you format the storage device.

▪ The total memory available to BD Data

Management may differ, depending on the conditions.

Divx® Video On Demand

View DivX® VOD Registration Codes to purchase and play DivX® VOD contents.

Language

You can select the language you prefer for the

Home menu, disc menu, etc.

• On-Screen Menu : Select the language for the on-screen displays.

• Disc Menu : Select the language for the disc menu displays.

• Audio : Select the language for disc audio.

• Subtitle : Select the language for disc subtitles.

✎ NOTE

▪ The selected language will only appear if it is supported on the disc.

Security

When you access this function for the first time, the password setup screen appears.

Enter a desired 4-digit password using the number buttons. (The default password is

0000.)

BD Parental Rating

Prevent playback of Blu-ray Discs with specific age ratings unless a password is entered.

• Off : BD Parental Rating is not active and all Blu-ray discs will play in full.

• On : This will prohibit playback of Blu-ray disc rated above Parental Rating.

DVD Parental Rating

This function works in conjunction with DVDs that have been assigned an age rating or numeric rating that indicates the maturity level of the content. These numbers help you control the types of DVDs that your family can watch.

Select the rating level you want to set.

For example, if you select Level 6, discs rated above 6 - Level 7 and 8 - will not play.

A larger number indicates more mature content.

youTube Lock

Restrict the use of the YouTube service unless a password is entered.

• Off : Turn Off YouTube lock.

• On : Turn On YouTube lock.

Change PIN

Change the 4-digit password used to access security functions.

If you forgot your password

1. Remove any discs.

2. Press and hold the STOP ( @ ) button on the front panel for 5 seconds or more.

All settings will revert to the factory settings.

✎ NOTE

▪ When the factory default settings are restored, all the user stored BD data will be deleted.

Time Zone

General

You can specify the time zone that is applicable to your area.

Support

Software Upgrade

The Software Upgrade menu allows you to upgrade the player’s software for performance improvements or additional services.

By Online

To upgrade By Online, follow these steps:

1. Select By Online , and then press the

ENTER button. The Connecting to Server message appears.

2. A popup message will appear if an update is available.

3. If you select yes , the player will turn off automatically before restarting.

(Never turn the player on during an upgrade.)

4. The update progress popup will appear.

When the update is completed, the player will turn back off automatically.

5. Press the POWER button to turn on the player.

✎ NOTE

▪ The Update is complete when the player turns off after restarting. Press the POWER button to turn on the updated player for your use.

▪ Never turn the player off or back on manually during the update process.

▪ Samsung Electronics shall take no legal responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade.

▪ If you want to cancel the upgrade while the upgrade software is downloading, press the

ENTER button.

By USB

To upgrade by USB, follow these steps:

1. Visit www.samsung.com/bluraysupport.

2. Download the latest USB software upgrade zip archive to your computer.

3. Unzip the zip archive to your computer.

You should have a single RUF file with the same name as the zip file.

4. Copy the RUF file to a USB flash drive.

5. Make sure there is no disc in the player, and then insert the USB flash drive into the

USB port of the player.

6. In the player’s menu, go to Settings >

Support > Software Upgrade.

7. Select By USB .

✎ NOTE

▪ No disc should be inserted in the product when you upgrade the software using the USB Host jack.

▪ When the software upgrade is done, check the software details in the software Upgrade menu.

▪ Do not turn off the player during the software upgrade. It may cause the player to malfunction.

▪ Software upgrades using the USB Host jack must be performed with a USB flash memory stick only.

Auto Upgrade Notification

If you have connected the player to your network, and then set Auto Upgrade

Notification on, the player automatically notifies you when a new software version is available for the player.

To set Auto Upgrade Notification on, follow these steps:

1. Select Auto Upgrade Notification , and then press the ENTER button.

2. Use the ▲▼ buttons to select On , and then press the ENTER button.

If there is a new software version available, the player notifies you with a popup message.

1. To upgrade the firmware, select yes on the

Pop-up. The player turns off automatically, then restarts, and begins the download.

(Never turn on the player manually here.)

2. The update progress popup appears.

3. When the update is complete, the player turns off again automatically.

4. Press the POWER button to turn on the player.

✎ NOTE

▪ Update is complete when the player turns off after restarting. Press the POWER button to turn on the updated player for your use.

Never turn the player off or on manually during the update process.

▪ Samsung Electronics shall take no legal responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during software upgrade.

Contact Samsung

Provides contact information for assistance with your player.

Terms of Service Agreement

View the general disclaimer regarding third party contents and services.

Reset

All settings will revert to the default except for the network settings.

Basic Functions

Playing a Video

title 1 title 2 chapter 1 chapter 2 chapter 1 chapter 2 chapter 3

Playback

1. Push a disc gently into the slot with the disc's label facing up.

• Audio CD (CD-DA)

2. Press the PLAy ( ) button.

Playback related buttons

PLAY (

STOP ( )

) Starts playback.

Stops playback.

• If you press the button once : The stop position is memorized.

• If you press the button twice : The stop position is not memorized.

PAUSE ( ) Pauses playback.

✎ NOTE

▪ For some discs, pressing the STOP ( ) button once may not memorize the stop position.

▪ Video files with high bit rates of 20Mbps or more strain the player’s capabilities and may stop playing during playback.

Disc Structure

The content of discs are usually divided as shown below.

• Blu-ray Disc, DVD-VIDEO track 1 track 2 track 3 track 4 track 5

• MP3, WMA, Divx, MKV and MP4 folder (group) 1 file 1 file 2 file 1 folder (group) 2 file 2 file 3

Using the Disc Menu/Title Menu/

Popup Menu

Using the Disc Menu

hZ

1. During playback, press the DISC

MENU button on the remote control.

2. Press the ▲▼◄► buttons to make a selection, and then press the ENTER button.

✎ NOTE

▪ Depending on the disc, the menu items may differ or this menu may not be available.

Using the Title Menu

1. During playback, press the TITLE

MENU button on the remote control.

2. Press the ▲▼◄► buttons to make the desired selection, then press the ENTER button.

Z

✎ NOTE

▪ Depending on the disc, the menu items may differ or this menu may not be available.

Playing the Title List

z

1. During playback, press the DISC

MENU or TITLE MENU button.

2. Press the ▲▼ buttons to select an entry you want to play from the Title List, and then press the

ENTER button.

✎ NOTE

▪ If your disc has a playlist, press the GREEN (B) button to go to the playlist.

Using the Popup Menu

1. During playback, press the POPUP

MENU button on the remote control.

2. Press the ▲▼◄► buttons or

ENTER button to select the desired menu.

h

✎ NOTE

▪ Depending on the disc, the menu items may differ or this menu may not be available.

Using the Search and Skip Functions

During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.

Searching for a Desired Scene

hzZ��

• During playback, press the SEARCH ( button.

)

Each time you press the SEARCH ( ) button, the playback speed will change as follows:

BD-ROM,

BD-RE/-R,

DVD-RW/-R,

DVD+RW/+R,

DVD-VIDEO

DivX, MKV,

MP4

) 1  ) 2  ) 3 

) 4  ) 5  ) 6  ) 7

( 1  ( 2  ( 3 

( 4  ( 5  ( 6  ( 7

) 1  ) 2  ) 3

( 1  ( 2  ( 3

• To return to normal speed playback, press the PLAy ( ) button.

✎ NOTE

▪ The player does not play sound in search mode.

Skipping Chapters

hzZ��

• During playback, press the SKIP ( button.

)

If you press the SKIP ( ) button, the disc moves to the next chapter.

If you press the SKIP ( ) button, the disc moves to the beginning of the chapter.

One more press makes the disc move to the beginning of the previous chapter.

Slow Motion Play/Step Motion Play

Slow Motion Play

hzZ��

• In pause mode, press the SEARCH ( ) button.

Each time you press the SEARCH ( ) button, the playback speed will change as follows: * 1/8 * 1/4 * 1/2

• To return to normal speed playback, press the PLAy ( ) button.

✎ NOTE

▪ The player does not play sound in Slow mode.

Step Motion Play

hzZ��

• In pause mode, press the PAUSE ( ) button.

Each time you press the PAUSE ( ) button, a new frame appears.

• To return to normal speed playback, press the PLAy ( ) button.

✎ NOTE

▪ The player does not play sound in step mode.

Using the TOOLS button

During playback, you can operate the disc menu by pressing the

TOOLS button.

✎ NOTE

▪ Depending on the disc, the Tools menu may differ.

Moving to a Desired Scene

Directly

hzZ�

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Title ,

Chapter or Playing Time .

3. Press the ◄► or number button to select the desired Title, Chapter or Playing Time, then press the ENTER button.

Repeating the Title or Chapter

hzZ�

Lets you repeat the disc title or chapter.

Depending on the disc, the Repeat function may not be available.

1. During playback, press the

REPEAT button.

2. Press the ▲▼ buttons to select

Chapter or Title , then press the

ENTER button.

3. To return to normal play, press the

REPEAT button again.

4. Press the ▲▼ buttons to select Off , then press the ENTER button.

Repeating a Section

hzZ�

1. During playback, press the REPEAT button.

2. Press the ▲▼ buttons to select

Repeat A-B .

3. Press the ENTER button at the point where you want repeat play to start (A).

4. Press the ENTER button at the point where you want repeat play to stop (B).

5. To return to normal play, press the

REPEAT button again.

6. Press the ▲▼ buttons to select Off , and then press the ENTER button.

✎ NOTE

▪ If you set point (B) less than 5 seconds of playing time after point (A), a prohibition message appears.

▪ Depending on the disc, the menu items may differ and this menu may not be available.

Selecting the Audio Language

hzZ�

You can also operate this function by pressing the AUDIO button on the remote control.

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Audio .

3. Press the ◄► buttons to select the desired audio language.

✎ NOTE

▪ The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any

BONUSVIEW audio settings.

▪ Information about the main feature/BONUSVIEW mode will also appear if the Blu-ray Disc has a

BONUSVIEW section.

Press the ◄► button to switch between main feature and BONUSVIEW audio modes.

▪ This function depends on the selection of audio languages encoded on the disc and may not be available.

▪ A Blu-ray Disc can contain up to 32 audio languages and a DVD up to 8.

▪ Some Blu-ray Discs may allow you to select either the PCM or Dolby digital audio soundtrack in English.

▪ If you press the AUDIO button on the remote control, the Audio bar appears.

Press the RETURN button to remove the Audio bar.

Selecting the Subtitle Language

hZ�

You can also operate this function by pressing the SUBTITLE button on the remote control.

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Subtitle .

3. Press the ◄► buttons to select the desired subtitle language.

✎ NOTE

▪ Depending on the Blu-ray Disc / DVD, you may be able to select the desired subtitle in the Disc

Menu. Press the DISC MENU button.

▪ This function depends on the selection of subtitles that are encoded on the disc and may not be available on all Blu-ray Discs/DVDs.

▪ A Blu-ray Disc can contain up to 255 subtitle languages and a DVD up to 32.

▪ Information about the main feature/BONUSVIEW mode will also appear if the Blu-ray Disc has a

BONUSVIEW section.

▪ This function changes both the primary and secondary subtitles at the same time.

▪ The total number of primary and secondary subtitles are displayed respectively.

▪ If you press the SUBTITLE button on the remote control, the subtitle bar appears.

Press the RETURN button to remove the subtitle bar.

Changing the Camera Angle

hZ

When a Blu-ray Disc/DVD contains multiple angles of a particular scene, you can use the

ANGLE function.

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Angle .

3. Press the ◄► buttons to select the desired Angle.

Selecting the Picture Settings

hzZ�

This function enables you to adjust video quality when the player is connected to a TV.

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Picture

Setting , and then press the ENTER button.

3. Press the ◄► buttons to select the desired Picture Setting .

• Dynamic : Choose this setting to increase Sharpness.

• Normal : Choose this setting for most viewing applications.

• Movie : This is the best setting for watching movies.

• User : Lets you adjust the sharpness and noise reduction function respectively.

✎ NOTE

▪ When you use BD wise function, this menu will not appear.

Setting BONUSVIEW

h

The BONUSVIEW feature allows you to view additional content (such as commentaries) in a small screen window while the movie is playing.

This function is only available if the disc has the Bonusview feature.

1. During playback, press the

TOOLS button.

2. Press the ▲▼ buttons to select BONUSVIEW Video or

BONUSVIEW Audio .

3. Press the ◄► buttons to select the desired Bonusview.

✎ NOTE

▪ If you switch from BONUSVIEW Video,

BONUSVIEW Audio will change automatically in accordance with BONUSVIEW Video.

Audio CD (CD-DA)/MP3 Screen

Elements

6 +

TRACK 001

00:08 / 05:57

TRACK 001

TRACK 002

TRACK 003

TRACK 004

TRACK 005

TRACK 006

" Pause

Playlist

05:57

1/6

04:27

04:07

03:41

03:17

03:35

Tools ' Return

Listening to Music

o�

Playing an Audio CD (CD-DA)/MP3

1. Insert an Audio CD (CD-DA) or an MP3

Disc.

• For an Audio CD (CD-DA), the first track plays automatically.

• For an MP3 disc, press the ◄► buttons to select Music , then press the ENTER button.

2. Press the ▲▼ buttons to select the track you want to play, and then press the

ENTER button.

1 Displays the music information.

2 Displays the playlist.

Display the current track/total tracks.

Displays buttons available.

Shows the current play time/total play time.

Displays the current playback status.

Displays the repeated playback status.

Repeat an Audio CD (CD-DA)/

MP3

1. During the Playlist playback, press the TOOLS button.

2. Select Repeat Mode , and then press the ◄► buttons to select the desired repeat mode.

3. Press the ENTER button .

Repeat Modes :

Off

( ) One

( ) All

Audio CD

(CD-DA)/MP3

MP3

Audio CD

(CD-DA)/MP3

( ) Shuffle Audio CD

Tracks on a disc are played in the order in which they were recorded on the disc.

Current track is repeated.

All tracks are repeated.

The random option plays a disc’s tracks in random order.

Playlist

1. Insert an Audio CD (CD-DA) or an MP3

Disc.

• For an Audio CD (CD-DA), the first track plays automatically.

• For an MP3 disc, press the ◄► buttons to select Music , then press the ENTER button.

2. To move to the Music List, press the

STOP ( ) or RETURN button.

The Music List screen appears.

3. Press the ▲▼◄► buttons to move to a desired track, then press the yELLOW (C) button to check the desired track.

Repeat this procedure to select additional tracks.

4. If you want to remove a track from the playlist, go to the track, and then press the yELLOW (C) button again. The track is removed.

5. Press the ENTER button to play the selected tracks.

The selected tracks will play automatically.

6. To go to the Music List, press the STOP ( ) or RETURN button.

7. To go to the Playlist, press the ENTER button.

✎ NOTE

▪ You can create a playlist with up to 99 tracks on

Audio CDs (CD-DA).

Playing back Pictures

G

Playing JPEG files

1. Insert a JPEG disc.

2. Press the ◄► buttons to select Photos , and then press the ENTER button.

3. Press the ▲▼◄► buttons to select the folder you want to play, and then press the

ENTER button.

4. Press the ▲▼◄► buttons to select the photo you want to play, and then press the

ENTER button.

✎ NOTE

▪ You can’t enlarge the subtitle and PG graphic in the full screen mod

e.

Using the TOOLS button

You can use various functions by pressing the TOOLS button.

• Start Slide Show : Select to start the slide show.

• Stop Slide Show : Select if you want to stop the slide show.

• Slide Show Speed : Select if you want to adjust the Slide Show speed.

• Background Music : Select to listen to music while viewing a slide show.

• Zoom : Select to enlarge the current picture. (Enlarged up to 4 times)

• Rotate : Select to rotate the picture. (This will rotate the picture either clockwise or counter clockwise.)

• Information : Shows the picture information including the name and size, etc.

✎ NOTE

▪ To enable the background music function, the photo file must be in the same storage media as the music file. However, the sound quality can be affected by the bit rate of the MP3 file, the size of the photo, and the encoding method.

▪ Start Slide Show and Stop Slide Show alternate, depending on whether you are running a slide show or not.

Playing back a USB Storage Device

You can use the USB connection to play multimedia files (MP3, JPEG, DivX, etc) located on a USB storage device.

1. Move to the Home menu.

2. In Stop mode, connect the USB storage device to the USB port on the rear panel of the player.

The message “Do you want to access the device?” will be displayed.

3. Press the ◄► button to select yes , then press the ENTER button.

4. Press the RED (A) button or BLUE (D) button.

If you pressed the RED (A) button, go to

Step 5.

If you pressed the BLUE (D) button, go to

Step 4 -1 .

Playing Selected Photos

You can select specific photos to play pressing the yELLOW (C) button on your remote. To select specific photos, follow these steps:

1. Select the folder that contains the photos you want to view, and then press the

ENTER button.

2. Press the ▲▼◄► buttons to select a photo you want to play, and then press the yELLOW (C) button. A check mark appears on the photo.

3. Repeat Step 2 for each photo you want to play.

✎ NOTE

▪ To deselect a photo, press the ▲▼◄► buttons to highlight the photo, and then press the yELLOW (C) button.

4. Press the ENTER button when done. The slide show starts.

YouTube

No Disc

123

DLNA

123 a Change Device c Safely Remove USB d View Devices " Enter

5. Press the ▲▼ buttons to select USB , then press the ENTER button.

6. Press the ◄► buttons to select the desired Videos, Music or Photos, then press the ENTER button. Go to Step 7

4 -1 . If you pressed the BLUE (D) button, the screen below appears. Go to 5 -1 .

123

YouTube d Home " Enter

5 -1 . Press the ◄► buttons to select USB , then press the ENTER button.

6 -1 . Press the ▲▼ buttons to select the desired Videos, Music or Photos, then press the ENTER button.

7. For playing back Video, Music or Photo files see pages 19~22.

✎ NOTE

▪ You must remove the USB storage device safely (by performing the “Safely Remove USB” function) in order to prevent possible damage to the USB memory. Press the MENU button to move to the Home menu, select the YELLOW (C) button, and then press the ENTER button.

▪ When the Audio-CD (CD-DA), MP3 or JPEG files are in stop mode, pressing the FULL SCREEN button on the remote will not bring up a full screen picture.

▪ If you insert a disc when playing a USB storage device, the device mode changes to “DVD or

CD” automatically.

Network Services

You can enjoy various network services such as BD-LIVE by connecting the player to your network.

Read the following instructions before using any network service.

1. Connecting the player to the network

(pages 10 and 11).

2. Configuring the network settings

(page 16).

BD-LIVE™

Once the player is connected to the network, you can enjoy various movie-related service contents using a BD-LIVE compliant disc.

1. Attach a USB memory stick to the USB jack on the rear panel of the player, and then check its remaining memory. The memory device must have at least 1GB of free space to accommodate the BD-LIVE services.

2. Insert a Blu-ray Disc that supports BD-

LIVE.

3. Select an item from various BD-LIVE service contents provided by the disc manufacturer.

✎ NOTE

▪ The way you use BD-LIVE and the provided contents may differ, depending on the disc manufacturer.

Appendix

Using the AllShare Function Troubleshooting

AllShare lets you play music, video, and photo files located in your PC or NAS on the player.

To use AllShare with your player, you must connect the player to your network (See pages 10~11).

To use AllShare with your PC, you must install

AllShare software on your PC.

If you have NAS, you can use AllShare without any additional software.

To download AllShare software

1. Go to Samsung.com

2. Click Support, enter your player’s product number in the field that appears, and then click Product.

3. On the next screen, click Get downloads under Downloads.

4. Click Software on the next page.

5. Click the icon in the AllShare line under File to start the download.

Playing content located in your

PC on the Blu-ray Disc Player

You can view shared files of your computer to your Blu-ray Disc Player.

You can get detailed instructions for using

AllShare from the Samsung.com web site.

AllShare Connection

Blu-ray Disc Player

Play back PC’s files

Before requesting service, please try the following solutions.

No operation can be performed with the remote control.

PROBLEM

Disc does not play.

• Ensure that the disc is installed with the label side facing up.

• Check the region number of the Blu-ray Disc/DVD.

Disc Menu does not appear.

• Ensure that the disc has disc menus.

The prohibition message appears on the screen.

SOLUTION

• Check the batteries in the remote control. They may need replacing.

• Operate the remote control at a distance of no more than 6.1m.

• Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it. Reinstall batteries and try to operate the remote control again.

Play mode differs from the

Setup Menu selection.

The screen ratio cannot be changed.

• This message appears when an invalid button is pressed.

• The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).

• You’ve requested a title or chapter number or search time that is out of range.

• Some of the functions selected in the Setup Menu may not work properly if the disc is not encoded with the corresponding function.

• The Screen Ratio is fixed on your Blu-ray Disc/DVD.

• This is not a problem with the player.

No audio.

The screen is blocked

• Make sure you have selected the correct Digital Output in the Audio Options

Menu.

• If the HDMI output is set to a resolution your TV cannot support (for example,

1080p), you may not see a picture on your TV.

• Press the STOP ( @ ) button (on front panel) for more than 5 seconds with no disc inside. All settings will revert to the factory settings.

• When the factory default settings are restored, all stored user BD data is deleted.

PROBLEM

Forgot password

If you experience other problems.

The picture is noisy or distorted

No HDMI output.

SOLUTION

• Press the STOP ( @ ) button (on front panel) for more than 5 seconds with no disc inside. All settings including the password will revert to the factory settings.

Don’t use this unless absolutely necessary.

• When the factory default settings are restored, all stored user BD data is deleted.

• Go to the contents and find the section of the user manual that contains the explanations regarding the current problem, and follow the procedure once again.

• If the problem still cannot be solved, please contact your nearest Samsung authorised service center.

• Make sure that the disc is not dirty or scratched.

• Clean the disc.

• Check the connection between the TV and the HDMI jack of the player.

• Check if your TV supports 576p/480p, 720p, 1080i, 1080p HDMI input resolution.

• If random noise appears on the screen, it means that TV does not support

HDCP (High-bandwidth Digital Content Protection).

Abnormal HDMI output screen.

AllShare function

I can see folders shared through AllShare, but I cannot see the files.

Video is played intermittently.

AllShare connection between Player and PC is unstable.

• AllShare shows only files corresponding to the Image, Music, and Movie categories. Files that do not correspond to these categories may not be displayed.

• Check if the network is stable.

• Check if the network cable is properly connected and if the network is not overloaded.

• The IP address under the same subnetwork should be unique. If they are not,

IP interference can cause this phenomenon.

• Check if you have a firewall enabled.

If so, disable the firewall function.

PROBLEM

BD-LIVE

I cannot connect to the BD-

LIVE server.

When using the BD-LIVE service, an error occurs.

SOLUTION

• Check whether the network connection is successful or not by using the

Network Status menu.

• Check whether the USB memory device is connected to the player.

• The memory device must have at least 1GB of free space to accommodate the BD-LIVE service.

You can check the available size in BD Data Management.

• Check whether the BD-LIVE Internet Connection menu is set to Allow(All).

• If all above fails, contact the contents provider or update the player to the latest firmware.

• The memory device must have at least 1GB of free space to accommodate the BD-LIVE service.

You can check the available size in BD Data Management.

✎ NOTE

▪ When the factory default settings are restored, all stored user BD data is deleted.

Repairs

If you contact us to repair your player, an administration fee may be charged if either:

1. An engineer is called out to your home at your request and there is no defect in the product.

2. You bring the unit to a repair center and there is no defect in the product.

We will provide you with the amount of the administration fee before we make a home visit or begin any work on your player.

We recommend you read this manually thoroughly, search for a solution on line at www.

samsung.com, or contact Samsung Customer Care before seeking to repair your player.

Specifications

General

Weight

Dimensions

Operating Temperature Range

Operating Humidity Range

Type A

USB

DC output

Video

HDMI

Audio

Audio Output Digital Audio Output

Network Ethernet

1 Kg

187 (W) X 187 (D) X 56 (H) mm

+5°C to +35°C

10 % to 75 %

USB 2.0

5V 500mA Max.

1080p, 1080i, 720p, 576p/480p

PCM, Bitstream

Optical

100BASE - TX Terminal

- It is not supported when the network speed is below or equal to 10Mbps.

- Design and specifications are subject to change without prior notice.

- For the power supply and power consumption, refer to the label attached to the product.

- Weight and dimensions are approximate.

Compliance and Compatibility Notice

NOT ALL discs are compatible

• Subject to the restrictions described below and those noted throughout this Manual, including the Disc Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded commercial

BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs. above discs may not play due to one or more reasons provided below.

• Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,

DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to all operating commands or operate all features of every disc. These and other disc compatibility and player operation issues with new and existing format discs are possible because:

- Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs because

Disc format after the production of this player, and certain available features may be subject to delayed availability;

- not all new and existing disc format versions are supported by this player;

- new and existing disc formats may be revised, changed, updated, improved and/or supplemented;

- some discs are produced in a manner that allows specific or limited operation and feature during playback;

- some features may be optional, additional features may have been added after the production of this player or certain available features may be subject to delayed availability;

- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and

CD-RW/-R logos may still be non-standardized discs;

- some discs may not be played depending on their physical state or recording conditions;

- problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the manufacture of discs;

- this player operates differently than a standard DVD player or other AV equipment; and/or

- for reasons noted throughout this user manual and for other reason(s) discovered and posted by

SAMSUNG customer care centre.

• If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer care centre.

You may also contact SAMSUNG customer care centre for possible updates on this player.

• For additional information on playback restrictions and disc compatibility, refer to the Precautions, Before

Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this user manual.

• For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT ALL

HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY

CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN PICTURE

PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD

DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS

PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

Copy Protection

• Because AACS (Advanced Access Content System) is approved as content protection system for

Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions

The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.

Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please contact SAMSUNG customer care centre.

• Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy protected Blu-ray Disc/DVDs.

• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorised recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other materials may subject you to civil and/or criminal liability.

• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibitet use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.

More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by email, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego CA, 92138,

USA.

This product incorporates proprietary technology under licence from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patens issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance

Network Service Disclaimer

All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal non-commercial use. You may not use any content or services in a manner that has not been authorised by the content owner or service provider. Without limiting the foregoing, unless expressly authorised by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services displayed through this device.

THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT WARRANT

CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.

SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO,

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG DOES NOT

GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT

OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING

NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR

ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN,

OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Third party services may be terminated or interrupted at any time, and Samsung makes no representation or warranty that any content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which Samsung has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or suspension of any content or service made available through this device.

Samsung is neither responsible nor liable for customer service related to the content and services. Any question or request for service relating to the content or services should be made directly to the respective content and service providers.

License

• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

UNITED KINGDOM EIRE

• Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;

6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the

Symbol, & DTS and the Symbol together are registered trademarks & DTS

2.0+Digital Out is a trademark of DTS, Inc. Product includes software.

• DivX

- ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,

LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.

- ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

- DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;

7,519,274.

• The terms HDMI and HDMI High-Definition Multimedia Interface, and the

HDMI Logo are trademarks or registered trademarks of HDMI Licensing

LLC in the United States and other countries.

• Oracle and Java are registered trademarks of Oracle and/or its affiliates.

Other names may be trademarks of their respective owners

• Open Source License Notice

- In the case of using open source software, Open Source Licenses are available on the product menu.

• Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.

This Samsung product is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased.

However, Samsung Authorised Dealers and

Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned.

In case of difficulty, details of our Authorised Service

Centres are available from:

Samsung Customer Support Centre, PO Box 479,

Gateshead, NE9 9BJ United Kingdom

Telephone : 0330 SAMSUNG (7267864)

Fax : 0330 7260001 (UK & Northern Ireland)

Tel : 0818 717 100

Fax : +44 (0)117 915 6736 (EIRE Only)

Web : www.samsung.com

@ WARRANTY CONDITIONS

1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced.

2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.

3. Warranty repairs must be carried out by Authorised

Samsung Dealers or Authorised Service Centres.

No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty.

4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any

Country other than the one for which the product was originally designed and manufactured. This warranty will not cover, and no re-imbursement will be made for such adaptation nor any damage which may result.

5. This warranty covers none of the following:

a) Periodic check ups, maintenance and repair or replacement of parts due to normal wear and tear.

b) Cost relating to transport, removal or installation of the product.

c) Misuse, including the failure to use this product for its normal purposes or incorrect installation.

d) Damage caused by Lightning, Water, Fire, Acts of God, War, Public Disturbances, incorrect mains voltage, improper ventilation or any other cause beyond the control of Samsung.

6. This warranty is valid for any person who legally acquired possession of the product during the warranty period.

7. The consumers statutory rights in any applicable national legislation whether against the retailer arising from the purchase contract or otherwise are not affected by this warranty. Unless there is national legislation to the contrary, the rights under this warranty are the consumers sole rights and

Samsung, its subsidiaries and distributors shall not be liable for indirect or consequential loss or any damage to records, compact discs, videos or audio taper or any other related equipment or material.

SAMSUNG ELECTRONICS (U.K.) LTD.

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the

SAMSUNG customer care centre.

HUNGARY

ITALIA

KOSOVO

LUXEMBURG

MONTENEGRO

NETHERLANDS

NORWAY

POLAND

PORTUGAL

ROMANIA

SERBIA

SLOVAKIA

SPAIN

SWEDEN

Switzerland

U.K

EIRE

LITHUANIA

LATVIA

ESTONIA

ALBANIA

AUSTRIA

BELGIUM

BOSNIA

BULGARIA

CROATIA

CZECH

DENMARK

FINLAND

FRANCE

GERMANY

CYPRUS

GREECE

Area Contact Centre 

42 27 5755

0810 - SAMSUNG (7267864, € 0.07/min)

02-201-24-18

05 133 1999

07001 33 11

062 SAMSUNG (062 726 7864)

800 - SAMSUNG (800-726786)

70 70 19 70

030 - 6227 515

01 48 63 00 00

01805 - SAMSUNG(726-7864 € 0,14/Min)

8009 4000 only from landline

80111-SAMSUNG (80111 726 7864) only from land line

(+30) 210 6897691 from mobile and land line

06-80-SAMSUNG(726-7864)

800-SAMSUNG(726-7864)

+381 0113216899

261 03 710

020 405 888

0900-SAMSUNG (0900-7267864) (€ 0,10/Min)

815-56 480

+48 22 607-93-33

808 20-SAMSUNG (808 20 7267)

(+40) 21 206 01 10 from mobile and land line

0700 Samsung (0700 726 7864)

0800 - SAMSUNG(0800-726 786)

902 - 1 - SAMSUNG (902 172 678)

0771 726 7864 (SAMSUNG)

0848 - SAMSUNG(7267864, CHF 0.08/min)

0330 SAMSUNG (7267864)

0818 717100

8-800-77777

8000-7267

800-7267

Web Site www.samsung.com

www.samsung.com

www.samsung.com/be_fr (French) www.samsung.com

www.samsung.com

www.samsung.com/ch www.samsung.com/ch_fr (French) www.samsung.com

www.samsung.com

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg , Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC

Directive 2006/66.

If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.

This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Key features

Black
Video formats supported: AVCHD, DIVX, MPEG2, MPEG4, WMV
Audio formats supported: AAC, LPCM, MP3, WMA
Dolby Digital, Dolby TrueHD, DTS
Video upscaling
3D
Ethernet LAN

Frequently asked questions

The BD-ROM format supports AVC, VC-1, and MPEG-2 video codecs.

This player supports FAT16, FAT32, and NTFS file systems.

Samsung cannot guarantee that this player will play every disc bearing the Blu-ray Disc logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc software and/or the manufacture of discs.