- Industrial & lab equipment
- Electrical equipment & supplies
- Electrical boxes & accessories
- Electrical enclosures
- QSC
- SB-118F & SB-218F
- Specification
advertisement
SB-118F/SB-218F
Preliminary
SB-118F/SB-218F
Flyable Cinema Subwoofer
Features
• High output performance with 800
W/1600 W continuous power rating
• Eight built-in M10 mounting points for overhead suspension
• 15 mm plywood construction for increased cabinet structural integrity
• 4 ohm impedance for efficient amplifier power
• Side mounted hand holds for easy handling during installation
• Foam-lined perforated steel grille
• Barrier Strip and Neutrik SpeakOn ® connection
The SB-118F single 18” and SB-218F dual
18” subwoofers are designed specifically for low frequency enhancement in cinema applications, especially for low frequency content of the surround channels using bass management techniques. A common application is suspending these enclosures from the cinema ceiling in proximity to the wall mounted surround loudspeakers for which the SB-118F/218F provides low frequency enhancement. The SB-118F/218F covers the frequency range from 37 Hz to
230 Hz.
These enclosures are designed for safe and easy suspension using eight built-in M10 fly points. Heavily braced, tour grade 15 mm plywood construction provides great strength while keeping weight to a minimum. The custom 800 watt, 18” transducers were developed especially for cinema use. They feature large 4” (101 mm) voice coils and a multi-vented pole piece to ensure cool operation, even at high power levels. Cooler temperatures increase transducer lifespan and decrease the problem of power compression at high power.
The SB-218F enclosure features separate chambers for each transducer. In the rare event of a transducer failure, this prevents over-excursion of the remaining transducer caused by improper box loading. Both models feature 4 ohm impedance, which means that you can use a smaller amplifier to get maximum output from the loudspeaker.
please recycle
SB-118F/218F Subwoofer Details
Specifications:
System Details
Configuration
Frequency Response (-6 dB)
Frequency Range (-10 dB)
SB-118F
1 x 18-inch, subwoofer
Power Capacity 2 : Continuous/Peak 800 W / 3200 W
Sensitivity (1W, 1m)
Output 1 (Peak SPL @ 1m)
98 dB
133 dB
Driver
Nominal Impedance
Input Connectors
Enclosure
Grille
Mounting
Net Weight
Shipping Weight
Dimensions (WxHxD)
37 Hz – 230 Hz
32 Hz – 230 Hz
1 x 457 mm (18-inch) driver with 101 mm (4-inch) voice coil
4 ohms
2 x NL4, 1 x barrier strip
15 mm plywood, black texture finish. Hand holds on each side.
Perforated, powder-coated steel, foam-lined
Eight (8) M10 threaded mounting points
43 kg / 95 lb
48 kg / 106 lb
590 x 616 x 615 mm /
23.2 x 24.2 x 23.6 in
1 With QSC processing
2 Power that the device can withstand for 2 hours without permanent change in acoustical, mechanical,
or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedances
Specifications are subject to change without notice.
SB-218F
2 x 18-inch, subwoofer
1600 W / 6400 W
101 dB
139 dB
2 x 457 mm (18-inch) drivers with 101 mm (4-inch) voice coils
76.4 kg / 168 lb
83.2 kg / 183 lb
1180 x 595 x 640 mm /
46.5 x 23.2 x 25.25 in
Dimensions:
SB-118F SB-218F
610.0mm
[24.02 in]
Front
615.3 mm
[24.22 in]
1180.0 mm
[46.46 in]
82.0 mm
[3.23 in]
142.0mm
[5.59 in]
30.0mm
[1.18 in]
186.0mm
[7.32 in]
Back
82.0mm
[3.23 in]
Front
155.0 mm
[6.10 in]
Back
414.5 mm
[16.32 in]
142.0 mm
[5.59 in]
©2018 QSC, LLC all rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries.
SpeakOn is a registered trademark of Neutrik AG. All other trademarks are the property of their respective owners. Patents may apply or be pending.
SB-118F/SB-218F Spec Sheet 01/1 5 /2018 please recycle
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project