Zenith SRV1320S Operating Manual & Warranty
Below you will find brief information for SRV1320S. This manual covers safety precautions, operating controls, and functions for the 13" Color TV/VCR Combination. It includes instructions for TV operation, VCR operation, recording, timer settings, and troubleshooting. Learn about features like the remote control, closed caption system, and time search. Understand how to connect the device to antennae, record videos and use the timer.
Advertisement
Advertisement
Operating Guide
& Warranty
• • • o o,l=,loo°o°aoQ°ooooooollo°jol,=,,°lI,olooQJloeoo====oooooo°°D°, ,o°
.....""":':'::::::!:i:!!!iii!iiiii!iii!iii!i!i!i!i!i!!iii.i..
13" ColorTV/VCR Combination
SRV1320S
L
VVARNING:
TO REDUCE THE Kl3_ t_l Hkt: _1< l:l.Lt. | F,i(
NIIt)LK,
1)() NOI EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
-CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO
USER SERVICEABLE PARTS INSIDE.
REFER
SERVICING
NEL.
TO QUALIFIED SERVICE PERSON-
THIS SYMBOL INDICATES
GEROUS VOLTAGE
THAT
CONSTITUTING
DAN-
A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
THIS SYMBOL
IN THE LITERATURE
THE APPLIANCE.
INDICATES THAT
THERE ARE IMPORTANT
AND MAINTENANCE
OPERATING
INSTRUCTIONS
ACCOMPANYING
The caution marking is located on the rear of the cabinet.
IMPORTANT SAFEGUARDS
1. Read instructions-All the safety and operating instructions should be read before the appliance is operated.
2. Retain Instructions-The safety and operating instructions should be retained for future reference.
3. Heed Warnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions-All operating and use instructions should be followed.
5. Cleaning-Unplug TVNCR from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
EXCEPTION : A product that is meant for uninter-
rupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a
CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning
description otherwise required in item 5.
6. Attachments-Do not use attachments not recommended by the TV/VCR manufacturer as they may cause hazards.
7. Water and Moisture-Do not use this TVNCR near
water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swim-
ming pool, and the like.
8. Accessories-Do not place this TVNCR on an unstable
cart, stand, tripod, bracket, or table. The TV/VCR may
fall, causing serious injury to someone, and serious dam-
age to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV/VCR.
Any mounting of the appliance should follow the manufacturer's instructions and
PORTABLE CART WARNING should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care.
9,
Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/VCR and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV/VCR on a bed, sofa, rug, or other similar surface.
This TV/VCR should never be placed near or over a radiator or heat register. This TV/VCR should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources-This TVNCR should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVNCRs intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization-This TV/VCR is equipped with a polarized alternating-current line plug(a plug hav-
ing one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
-2-
EN
5L01
EXAMPLE UP ANTENNA
NATIONAL
GROUNUING
ELECTRICAL CODE
AS PER
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
$2898A
NEC - NATIONAL ELECTRICAL CODE
."_'-=_1-"--"
- GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
13. Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the TV/VCR, be sure the
antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-dis-
charge unit, connection to grounding electrodes, and re-
quirements for the grounding electrode. (Fig. A)
14. Lightning-For added protection for this TV/VCR re-
ceiver during a lightning storm, or when it is left unat-
tended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the TV/VCR due to lightning and power-line surges.
15. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
16. Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry-Never push objects of any kind into this TV/VCR through openings as they may touch
dangerous vokage points or short out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the TVNCR.
18. Servicing-Do not attempt to service this TV/VCR your-
self as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service-Unplug this TV/VCR from the wall outlet and refer servicing to qualified service personnel under the following conditions: a.
When the power-supply cord or plug is damaged or flayed.
b.
If liquid has been spilled, or objects have fallen into the
TV/VCR.
c.
If the TVNCR has been exposed to rain or water.
d.
If the TV/VCR does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/VCR to its normal operation.
e.
If the TVNCR has been dropped or damaged in any way.
f.
When the TV/VCR exhibits a distinct change in performance-this indicates a need for service.
20. Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer same characteristics as the original part.
that have
Unauthorized the substitutions may result in fire, electric shock, injury to persons or other hazards.
21. Safety Cheek-Upon
to this TVNCR, completion of any service or repairs ask the service technician to perform routine safety checks to determine that the TV/VCR is in proper operating condition.
22. Heat-This TV/VCR product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
- 3 - EN
5L01
For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place • for its installation:
Do not handle the power cord with wet hands.
• Shield it from direct sunlight and keep it away from sources of intense heat.
Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.
• Avoid dusty or humid places.
If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to an authorized Sears service center for servicing.
• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
Do not put your fingers or objects into the TV/VCR cassette holder.
Do not place anything directly on top of the unit.
• Install unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the unit near strong magnetic fields.
• Do not move the unit from a cold to a hot place or vice versa.
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. If a tape is played in a TV/VCR which has moisture, it may damage the tape and TV/VCR.
Therefore when the condensation occurs inside the unit turn the POWER button on and allow at least 2 hours for the unit to dry out.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws. We assume no responsibility for the unauthorized duplication, use, or other acts which infringe upon the rights of copyright owners.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
-4-
EN
6D11
• IMPOR_ANI' _'A_E_UARDS ...........................
2
• I)RECAU_ONS ...................................................
4
LOCATION ..........................................................
4
AVOIDING THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE .............................................
4
WARNING ...........................................................
4
• TVOPERATION ................................................
17
WATCHING A TV PROGRAM .......................
17
GAME MODE ....................................................
PICTURE CONTROL ........................................
CLOSED CAPTION SYSTEM .........................
17
17
18
• NORMAL PLAYBACK ......................................
19
• FEATURES ..........................................................
• SUPPLIED ACCESSORIES ...............................
6
6
• SPECIAL PLAYBACK .......................................
20
RENTAL PLAYBACK ......................................
20
REPEAT PLAYBACK .......................................
20
• VIDEO CASSETTE .............................................
7
• OPERA TING CONTROLS AND FUNCTIONS..
• PREPARATION FOR USE ...............................
10
CABLECONNECTIONS ..................................
INSTALLING THEBATTERIES .....................
EXTERNALINPUT MODE ..............................
• PRESET FOR USE ............................................
12
PRESET FOR THE FIRST TIME .....................
12
DELETING (OR ADDING) PRESET
CHANNELS .......................................................
12
AUTO PRESET AGAIN ....................................
13
SELECTING DESIRED LANGUAGE ............ 13
(AUTO / MANUAL) ..........................................
14
• ON-SCREEN DISPLA Y ....................................
II
8
10
11
16
• SEARCH .............................................................
21
COUNTER MEMORY ......................................
21
TIME SEARCH ..................................................
21
• RECORDING .....................................................
22
NORMAL RECORDING ..................................
22
SKIPPING SOME MATERIALS DURING
RECORDING .....................................................
22
OTR (One Touch Recording) .............................
23
COPYING A VIDEO CASSETTE
(Requires another VCR) .....................................
23
• TIMER ................................................................
AUTOMATIC TIMER RECORDING
AUTO RETURN ................................................
24
.............. 24
26
SLEEP TIMER ...................................................
27
ALARM TIMER ................................................
27
• SPECIAL FEATURES ......................................
16
DEGAUSSING ...................................................
16
AUTO REWIND-EJECT ...................................
16
• TROUBLESHOOTING
• MAINTENANCE
GUIDE .......................
...............................................
28
29
• SPECIFICATIONS ............................................
30
The serial number of this product is on the back of the unit. Each serial number is unique. You should record this number and other vital information in this book and keep as a permanent record of your purchase in the event of theft to aid in its identification.
m ....
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
- 5 EN
6DI1
• Infrared remote control
• Bilingual on-screen menu display selectable in
English or Spanish
• Real time counter-This shows the elapsed recording or playback time in hours, minutes, and seconds.
The "-" indicates that the tape is rewound further than "0:00:00" on the tape counter.
• 181 channelcapability PLL frequency synthesizer tuner with direct station call(A converter may be necessary to view scrambled cable channels.)
• Auto clock setting-Allows you to use the clock function from the PBS broadcast.
• Closed caption system-You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.
• Game mode- Allows TV/VCR display to be suitable for use with TV games.
• Auto power on system- (when a tape is inserted)
• Auto rewind when the end of a tape is reached-
(not in the case of timer recording).
• 2 Step picture search operation- You can view a video program at a high speed or super high speed in either a forward or reverse direction in either LP or SLP mode.
• Still-"Freeze" the picture at any time for close viewing of a particular scene. Only tapes recorded in the SLP mode will show a fairly clear picture.
• Digital Auto Tracking (DTR)-Adjusts the tracking automatically for each tape you play.
• Rental play mode- Improves playback picture quality of worn tapes, such as rental tapes.
• Auto repeat-Allows you to repeat a tape indefinitely without pressing the PLAY button.
• Time search- Allows you to set the TV/VCR to advance the tape by entering the desired playback time you want to skip.
• Three different tape speeds : SP/LP/SLP
• OTR (One Touch Recording)-Instant timed recording from 30 to 480 minutes is possible at the push of the REC/OTR button.
• 1 Year, 8 events (including Daily and Weekly
Timer Recording) The built-in timer allows you to record up to 8 programs at different times on different channels up to 1 year in advance. The Daily timer allows recordings to be made of daily broadcasts.
The Weekly timer allows recording to be made once a week until to the end of the tape is reached.
• Auto return-After finished timer recording, the beginning of the recorded program(s) can be searched.
• Sleep timer-Allows you to have the TV/VCR automatically turn off at a desired time.
• Alarm timer-Allows you to have the TV/VCR automatically turn on at a desired time.
Remote Control Unit
SUPPLIED ACCESSORIES
Dipole Antenna Matching Adapter 2 AA Batteries
PART NUMBER
(UREMT32SR018)
PART NUMBER
(0EMN00723)
PART NUMBER
(1813641, 1780103, 1780258)
If you need to replace these accessories, please refer to the PART NUMBER located under each illustration and contact the Sears Parts Department to order.
- 6 EN
6Dll
_ JJ)I!,U L.it,_3J_ Ji i!,
"lhi.,, 1 V/VCR will operate wi|h ;All) cassette that has the VHS mark.
For bcs! results, wc recommend the use ol high-quality tapes. Please do NOT use poor quality or damaged tapes.
PRECA UTIONS INSERTING A CA SSETTE
• Avoid moisture.
Moisture condensation may occur on the tape if it is moved from a cold place to a warm place. When using a tape under these conditions, wait until the tape has warmed to room temperature and the moisture has evaporated to avoid a damage to the tape and your TV/VCR.
• Avoid exposure to extreme heat, high humidity, and magnetic fields.
• Do not tamper with the cassette mechanism.
• Do not touch the tape with your fingers.
Insert the cassette in the direction as shown. Gently push on the back center portion of the cassette continuously until it is drawn into the TV/VCR.
The TV/VCR will automatically turn on.
CORRECT WRONG
THREE DIFFFRENT TAPE SPEI_I)S
Select the desired tape speed format before recording:
SP Mode:Standard Play
LP Mode:Long Play
SLP Mode: Super Long Play
The table below shows the maximum recording/playback time when using a T60, T 120, or T 160 tape in each mode.
Tape Speed
Type of tape
SP mode
LP mode
SLP mode
Recording/Playback Time
T60 T120
1 hour 2 hours
2 hours 4 hours
3 hours 6 hours
T160
2-2/3 hours
5-1/3 hours
8 hours
REMOVING A CASSETTE
1) In the Stop mode, press EJECT button on the remote control or press STOP/EJECT button on the
TV/VCR.
The TV/VCR will eject the tape.
2) Pull the cassette out of the cassette compartment and store in its case as shown.
ERASE PREVENTION
Breaking off the plastic tab from the back edge of the cassette prevents accidental erasure of your recording.
If you decide to record on ] the tape again, simply cover [ the hole with tape.
]
Plastic Tape
- 7 EN
6Dll
_Jl LKAI IfN_
_ON
- FRONT VIEW -
KUL, b AJND i_
U_LliO_
15
_REWlND
RECORO
1 2
POWER
3 4 5 6 7 8 9 10 11 12
- REMOTE CONTROL VIEW -
SELECT
(D
ADD/
DELETE !
(D--
C.RESET :
),MEMORY
C>--
:
5
24
23
3
1 AUDIO input lack- Connects audio output jack of your audioequipment or anotherVCR to theunit.
2 VIDEO input jack- Connects video output jack of your video camera or another VCR to the unit.
3 RECORD indicator-Flashes during recording.
Lights up in the Stand-by mode for Timer Recording.
4 POWER button-Turns TV/VCR on and off. Press to activate the Automatic Timer Recording mode.
5 STOP button Stops the tape.
EJECT button- Presswhile in the STOP modeto remove a tape from the TV/VCR.
6 REWIND button- Rewinds the tape. Press during the
PLAY mode to view the picture rapidly in reverse.
7 PLAY button- Begins playback of a recording.
8 F.FWD button-Rapidly advances the tape. Press during the PLAY mode to view the picture rapidly in forward.
REC buttonBegins manual recording.
OTR buttonActivates the One Touch Recording.
(located only on the TV/VCR unit)
10
VOLUME _
11
CHANNEL _ buttonsAdjusts the volume level.
buttonsSelects the channel for viewing or recording.
PICTURE CONTROL function-Adjusts the picture control.
This function is available only from the remote control.
(See page 17)
TRACKING +/- functionMinimizes video 'noise'
(lines or dots on the screen) during the Play mode.
(See page 19)
-8-
EN
6D11
- REAR VIEW-
25
12 EARPHONE jack- Connects earphones (not sup20 plied) for personal listening. The size of jack is 1/8"
C.MEMORY buttonTurns counter memory on and off. (See page 21) monaural (3.5mm).
21 ADD/DELETE button-Deletes or adds channel
13
14
Cassette compartment
NUMBER buttonsSelects viewing or recording. To select channels 1 to 9, press the 0 and the desired channel.
desired channels for numbers in the Channel Set Up mode (See page 12).
Press to cancel a setting program (such as setting clock or timer program) (See page 25)
NOTE: These functions are operative only during the ON-SCREEN menu mode.
÷100 button- Selects 100+ cable channels. To select channel 125, first press the "+100" button and then press "2" and "5".
15 ALARM button- Sets the time to have the TV/VCR automatically turn on. (See page 27)
C.RESET button- Resets counter to 0:00:00.
22 SELECT buttonWhen setting program (for example: setting clock or timer program), press to determine your selection and to proceed to the next choice.
16 SPEED button- Sets desired recording speed.
(SP/LP/SLP)
DISPLAY function-Displays on the TV screen either the counter or the current channel number and
17 PAUSE/STILL button- Used to temporarily stop the current time. (See page 16) tape during the recording or to view a still picture 23 during playback.
MENU button-Displays screen.
18 CHANNEL RETURN button-Toggles between the current channel and the previously viewed channel.
24 main menu on the TV
MUTE button- Mutes the sound. Press it again to resume sound.
19 SLEEP button- Sets the Sleep Timer. (See page 27)
25 ANT. terminalConnects to an antenna or CATV.
- 9 EN
61) I 1
VItI,YUttP SEPARA i i_ AA i i_A_AA5
It is necessary in some area to use an outdoor antenna.
VIII_/UttP ' COMBINIfl) A N 11":NNA q'he VHF/UHF Rod Antenna (supplied) is detachable.
Insert the stem of the antenna into the hole on the upperback portion of the TV/VCR.
Connect the VHF/UHF Rod Antenna or VHF/UHF
Combination Antenna to the ANT.
terminal of the
TV/VCR as shown in the diagram below.
For the best reception, fully extend the VHF/UHF Rod
Anlenna and make the necessary adjustments.
(Avoid touching the top section when adjusting.)
[
I
1__
VHF Antenna
VHF/UHF
=_ UHF Antenna
Combiner
II
I (Notsupplied)
II
Dipole Antenna(Supplied) VHF/UHF Antenna
_ Flat twin-lead cable
CABLE WITHOUT CONVERTER/
DE-SCRAMBLER
BOX
Use this connection if your cable system connects directly to your TV/VCR without a converter box.
By using this connection you can:
1) Use the TV/VCR remote to select channels
2) Program one or more unscrambled channels for
Automatic Timer Recording.
From Cable System
NOTE :
Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten the pin first before plugging the cable into antenna terminal.
Bent pin
,I,
Coaxial Cable _t____'_
ANT.@
(Needs to be straightened) (Straight pin)
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
-10EN
6DI 1
+,ABLE WITIt
CONVERTER/DE-SCRAMBLER BOX
If your cable service supplies you with a converter box, you can use the basic connection shown below.
By using this connection you can record and view any channel including scrambled channels.
However, channel selection must be made using the converter box. This means that channels cannot be changed using the
TV/VCR Remote Control.
Unattended recording is limited to one channel at a time.
1) Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity
(+1-) markings and replace the cover.
TO RECORD A SCRAMBLED/UNSCRAMBLED
CHANNEL
I.
Set the TVNCR channel selector to the output channel for the Cable Converter Box. (Ex. CH3)
2. Select which channel to record from your Cable
Converter Box.
75-ohm
Coaxial Cable
(not supplied)
Cable Box (not supplied)
From Cable System
When using an external input signal (another VCR or camcorder), connect the player's audio/video output cables to the AUDIO IN,
VIDEO IN jacks on your AUX
TV/VCR.
Then, press
CHANNEL • or • button or enter "00" so that "AUX" screen appears.
4_:c:__'_
_
_ _
II
:[,",I:,_I I
NOTE: When using a cable converter box, you cannot record one channel and view another.
- 11 EN
(_Dll
When first using the TV/VCR, you may want to select language (English or Espafiol=Spanish) and preset the tuner to show only the channels you receive in your area.
You must use the remote control for the following steps.
NOTE: Channel memory programming is not needed when using a converter/de-scrambler box.
1 Plug the TV/VCR power cord ;-_ into a standard AC outlet.
Channels that you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channels to the memory again.)
1
Select "CHANNEL SET UP"
Press MENU button to move to
"CHANNEL SET UP" and press
SELECT button.
_M_RR.0_.A_,NG
PICTURE CONTROL s .........
UP
USER'S SET UP
CART,O.
TIME SEARCH
2 Turn on the TVNCR l I I i lJ J Jll I[ I I I U J II II I £N
3 Select "ENGLISH" or "ESPAI_iOL"
LANGUAGE
_S,A_O_
Select by using the CH • or • f button. "[ ]" indicate the selected language.
L -sET0p-
I J] J [
2 Select "ADDfDELETE CH"
Press MENU button to move to
"ADD/DELETE
SELECT button.
CH" and press
II_
"W/CA'rV
AUTO PRESET
ADD / OELETE CH
[ TV ]
CHANNEL SET UP -
4 Begin auto preset SETUP-
LANGUAGE
Press MENU button to move to
"AUTO PRESET" and press
SELECT button.
The tuner scans and memorizes all the active channels in your area.
NOTES:
..........
• The TV/VCR distinguishes between standard TV channels and CATV automatically.
• If you want to play or record a video tape BEFORE presetting the tuner, you must press MENU button.
To preset the tuner again, see "AUTO PRESET
AGAIN".
3 Enter the desired channel number
Press CH • or • button until the desired channel number appears.
You can also use the number buttons to enter it.
0_ c_ )
,SO_ET_C. "_ J
4 Delete (or add) it from (into) memory
Press ADD/DELETE button.
The channel number changes to light red. The channel is deleted from memory.
• To delete another channel, repeat steps [3] and [4].
• If you press the ADD/DELETE button again, the channel is added to memory again.
L l dded channel : Light blue.
5 After scanning
The tuner stops at the lowest memorized channel.
(TV mode: from CH 02/CATV mode: from CH 01)
Should you want to recall the selected channels, you can select the desired channel by using the remote control number buttons or CH • or V.
5 Exit the channel setup mode
Press MENU button to return to TV mode.
NOTE: If you wish to confirm that channel(s) has been deleted or added, press CH • or • button.
TO RETURN
SCANNING
TO TV MODE WHEN
Press MENU button in scanning mode.
-12EN
6DI 1
1 Select "CHANNEL SET UP"
I Select"LANGUAGE"
Press MENU button to move to "LANGUAGE".
"CHANNEL SET UP" and press
SELECT button,
TIMER PROGRAMMING
SE_,.GOL_K
CHANNEL osER
SET UP
......
LANGUAGE ENGLISH]
CAPTION [C_PTION 1 ]
TIME SEARCH
2 Select "ENGLISH" or "ESPANOL"
2 Select "TV" or "CATV"
Select "ENGLISH" or
"ESPAIqOL = Spanish" using
CH • or • button.
_
[lj
.... CLO_KCO_T"O_
LANGUAG
SET UP
[EP GLISH]
_MESEA _ _ la l
Select [TV] or [CATV] by using
CH • or • button.
AUTO PRESET
ADO I DELETE CH dP" | _I
I
.J
3 Exit the Language mode
Press MENU button until the TV/VCR returns to the TV mode.
3 Begin auto preset
Press MENU button to move to
"AUTO PRESET" and press
SELECT button.
The tuner scans and memorizes all the active channels in your area.
c ......
,v,c,_
AUTO PRESET
............
ET UP -
__
4 After scanning
The tuner stops at the lowest memorized channel.
(TV mode: from CH02 / CATV mode: from CH01)
- 13 EN
6D11
2 Set "AUTO CLOCK" to [ON]
Settheclockaccurately recording.
available
SETTING".
SETTING".
Press CH • or • button until
[ON] appears.
A UTO CLOCK SL 171NG
You can have the TV/VCR set the clock automatically by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TV/VCR will automatically monitor the correct time and date being broadcast by the
PBS station in your area, using a new service called
Extended Data Service (EDS).
MANUAL CLOCK SET
3 Enter the channel number for the PBS station
Press MENU button and use the CH • or • button until the channel number for your local PBS station appears.
If you do not know the PBS channel number, leave it set to
[AUTO].
The TV/VCR will search automatically all available channels for the local PBS station, and will select that channel.
MANUAL CLOCK SET l
Make sure ...
• Turn on the TV/VCR.
• Confirm that the antenna connections are correct.
4 Exit the Auto Clock Setting
Press MENU button until the TV/VCR return to the TV mode.
• The cable converter box must be turned on if your
TV/VCR is connected directly to it. (See NOTES)
• You must use the remote control for the following steps.
5 Turn off the TV/VCR
Press POWER button to turn offthe TV/VCR for searching the local PBS station. The power must remain off during this search.
NOTES:
If you enter the channel number manually,
• Auto clock setting only needs to be set once, but can be done again if the clock's time has become
incorrect for some reason.
• it may take for about a few minutes for this search to be completed.
If you choose [A UT01,
• If the TV/VCR is connected directly to a cable
converter box, the local PBS station must be selected
on the cable box itself, and the TV/VCR must be set
to the output channel of the cable converter box
(usually channel 3 or 4), to be able to set up and automatically correct the clock.
The TV/VCR cannot control the channels of the cable converter box.
• the TV/VCR must search through all the available channels. It must scan each channel for a couple of minutes to determine if that channel is transmitting the EDS signal, because the PB S station will send this signal only once every minute. This search could take up to 2 hours. You may want to start this channel search at night when the unit is not in use.
• if the time that is automatically set by this selected
PBS station is incorrect, it may not be your local PBS station, but one from a different time zone. Or there
1 Select "SETTING CLOCK" is a case that no channel is broadcasting the EDS signal in your area, as shown by no time being set even after an overnight search. In these cases, you
"SETTING CLOCK" and press
SELECT button.
Press MENU button to move to l"
...............
SETTING must manually enter the correct local PBS station, or
USER'S
....
CLOCK
CH".E_S_T_
SET UP u
1 set the clock manually, turning off the Auto Clock
Setting feature.
TIME SEARCH
-14EN
61311
Make sure ...
• The remote control needs to be used.
• Power must be turned on.
lit/he eaample below, lhe clock will be sel Io."
March 1st, 1996 at 5:40PM
1
Select "SETTING CLOCK"
Press MENU button to move to
"SETTING CLOCK" and press
SELECT button.
Ill=*
TLMER
PICTURE
PROGRA_MLNG
CONTROL
SEI3"ING
CHANNEL
CLOCK
SET UP
USER'S
LANGUAGE
CAPTION
TIME
SET
SEARCH
UP
ENGLISH]
]
Select the hour
Press CH • or • button until your desired hour appears and press SELECT button.
EXAMPLE: 5PM
MONTH DAY YEAR
03 01 FRI
SETTING CLOCK
2 t')l_" -'_1¢
1996
-
2 Select "MANUAL CLOCK SET"
Press MENU button to move to
"MANUAL CLOCK SET" and press SELECT button ............
SETTING CLOCK
_'
II_
7 Select the minute
Press CH • or • button until the desired minute appears.
EXAMPLE: 40
MONTH DAY o..........
,ous,,_gTE o_ ._o_
YEAR
3 Select the month
Press CH • or • button until your desired month appears and press SELECT button.
EXAMPLE: 03 = March
OUR MINUTE
8 Start the clock
Press MENU or SELECT button.
Although seconds are not displayed, they begin counting from
00 when you press MENU or SE-
LECT button. Use this feature to synchronize the clock with the correct time.
5 40PM 1
• This unit has a built-in calendar up to the year 2010.
4 Select the day
Press CH • or • button until your desired day appears and
press SELECT button.
EXAMPLE: 01 = 1st
SETTING CLOCK -
MON_H,._, YEA.
o, ._oI¢ ......
HOUR MINUTE ii i ii iii
5 Select the year i i ii i i i
Press CH • or • button until your desired year appears and press SELECT button.
EXAMPLE: 1996
-
MONTH
8ETTtNG
DAY
CLOCK -
_E_R•
.......
-:,%.]
/
HOUR MINUTE / J
TO CHANGE CLOCK SETI7NG
1) Follow steps [1] and [3].
2) Select where you want to change using SELECT button or ADD/DELETE button.
3) Enter correct numbers using CH • or • button.
4) Press MENU or SELECT button to start the clock.
HINT!
If there is no local PBS station in your area or on your cable system, in step2 above, select "AUTO CLOCK " and press CH • or • button to show [OFF], then manually adjust clock.
- 15 EN
6DI 1
rio check the
CiouJltcr,
Clock a_d Channel number on the TV scrcen, press SELECT button t)_ the remote control.
Each time you press SELECT button on the remote control, the TV screen will change as follows:
When the Closed Caption mode is OFF:
OFF mode
• Counter mode: After 5 seconds, only the counter remains.
To clear it, press
• Clock mode: After 5 seconds, only the clock and the channel number remain.
To clear them, press SELECT button.
[
Counter mode
$P COUNT 0:12:34
Clock mode
CH2
5:40PM STOP
SP
_ After 5 seconds
5:40PM
OH2
COUNT
Counter remains
0:12:34
Clock & Channel remains
.........................
..................
•
Clock/Counter mode
When the Closed Caption mode is ON:
• The On-Screen Display disappears after 5 seconds.
• This is true even if MUTE button is pressed, or
PAUSE/STILL button is pressed while recording.
OFF mode
SP COUNT 0:12:34
SPECIAL FEAT URES
Magnetism from nearby appliances might affect the color of the TV picture.
If this happens, move this unit away from the appliance.
If the color is still not correct, disconnect power cord from AC outlet and reconnect it after 30 minutes.
• When the end of a tape is reached during recording, playback, or fast-forward, the tape will automatically rewind to the beginning, eject tape, and turn off.
• This function is operative when Auto Repeat is set to the [OFF] position.
• The tape will not auto-rewind during timer recording or One Touch Recording.
• When the tape is rewound to the preset memory position of the Counter Memory during Auto Rewind, the tape will not eject and TV/VCR will not turn off.
-16-
EN
6DI1
1 Turn on the TVNCR
2 Select the channel number
Press CH • or • button to select your desired channel number.
CH 06
The TV/VCR's picture controls BRIGHT,
CONTRAST, COLOR, TINT and SHARPNESS are preset to factory specifications.
Although they are usually the best, you may need to make some further adjustments for a natural looking image.
NOTES:
• Procedures must be followed within 5 seconds or the
Picture Control mode will be cancelled.
• When setting the Picture Control, the Game mode will automatically set to [OFF].
Make sure ...
• Use the remote control unit for the following steps:
3 Adjust sound
Press VOLUME • or • button to adjust the volume.
VOLUME 20 lllililiilnl
1
Select "PICTURE CONTROL"
Press MENU button to move to _" - M_ N o-
SETTING CLOCK press SELECT button.
"PICTURE CONTROL" and /"
SS_S_
LANGUAGE
CAP'FION
[ENGLISH
1
T ME SEARCH
This function enables you to adjust the TV screen making it suitable to use for a TV GAME.
Make sure ...
You must use the remote control unit for the following steps:
2 Select the item you want to adjust
Press SELECT button until the desired control is displayed.
Each will appear in sequence on the TV screen.
Press MENU button to move to
1 Select "USER'S SET UP" I
SELECT button.
TIMER PROGRAMMING
SE'_,N_0_0CN
CHANNEL SETUP
LANGUAGE
CAPTION
ENGLISH
[C_PTION 1]
' .........
l
CONTRAST
COLOR
TINT
SHARPNESS
-:l ,,J
BRIGHT
_JI _J
2 Set "GAME MODE"to [ON]
Press CH • or • button until f ..... .......
EM _.1_
[ON] appears,
3 Exit the Game mode
Press MENU button until the TV/VCR returns to the TV mode.
TO CANCEL
REPEAT PLAY [OFF] l" _AM.ENT,_O0_
TIlE GAME MODE
3 Adjust the picture control
Press CH • or • button to adjust to 'our desired level.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
CH • to decrease brightness to decrease contrast to pale to purple to soft
CH • to increase brightness to increase contrast to brilliant to green to clear
Repeat step [1] and [2], selecting [OFF]. Press MENU button to return to TV mode.
-17EN
6Dll
You can view specially labeled (cc) TV programs, movies, news and pre-recorded tapes with either a dialogue caption or text display.
CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news, while captioning the dialogues and the contents of news.
TEXT mode: By choosing the text mode, you can watch full screen text information.
1/2: You may get these captions or text information by selecting either "1" or "2". "2" is used usually for a second language if available.
Make sure ...
• Use the remote control unit for the following steps.
• Power must be turned on.
1 Select
"CAPTION".
"CAPTION"
Press MENU button to move to
TIMER
PICTURE
PROGRAMMING
CONTROL
SETTING
CHANNEL
USER'S S
CLOCK
SET
P
UP
L AN G U A_l- i_:i'_
CAPTI_ -MENU-
L IS H]
2 Select your desired caption menu
Press CH • or • button until your desired caption menu appears.
([CAPTIONI], [CAPTION2],
[TEXT1] or [TEXT2])
-MENU-
..............
c
PICTURE CONTROL
......
CAP TIOIW*I(
JJG L_H]
PTIONI]
.......
_' •
_
1
NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free closed captions from high quality antenna, cable and VCR signals.
Conversely, poor quality signals are likely to result in caption errors or no captions at all. Common signal conditions which may cause captions errors are listed below:
• Automobile ignition noise.
• Electric motor brush noise.
• Weak snowy reception on TV Screen.
• Multiplex signal reception displaying picture ghosts or airplane flutter.
• Playback of poorly recorded or worn VCR tapes.
3 Exit the caption setting mode
Press MENU button until the TV/VCR returns to the TV mode.
TO CANCEL
SYSTEM
Repeat steps [1] and [2], selecting [OFF] using CH • or • button.
7'HE CLOSED CAPITON
If the TV/VCR displays a black box ( on the TV screen, this means that the TV/VCR is set to the TEXT
[ mode.
To clear screen, select
[CAPTION1], [CAPTION2] or ,---
[OFF].
WHEN THE CLOSED
IS ON
CAPTION MODE
The On Screen Display will disappear after 5 seconds.
• This is true when the MUTE button is pressed and when PAUSE/STILL button is pressed while recording.
- 18- EN
6DII
_UI_NiAL i_LAil itALtk
Make sure ...
• Power is turned on.
1 Insert a pre-recorded tape if the erase-protection tab has been removed, the
TV/VCR will start playback automatically.
Press PLAY button.
2 IP_"
Press STOP button when playback is completed.
3 I _
[ PIcTuREsEARCH
This feature is useful in finding or skipping over a particular scene on a tape. In this mode, the sound is muted.
1) While in the PLAY mode, you can view a video tape at a high speed in either a forward or reverse direction by pressing F.FWD or REW button.
(available in SP / LP / SLP modes)
2) Depress it again, the TV/VCR will now search in super high speed.
(available in LP / SLP modes)
NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the picture may revert to Black and White.
This is normal.
3) For normal speed, simply press PLAY button.
STILL PICTURE
TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically (Digital Auto Tracking function) (ATR) when you start playback.
• When playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the screen.
If this occurs, adjust the tracking control by pressing CH • or • button until the streaks disappear.
To return to the ATR function, stop the tape once and start playback again.
You can view a still picture on the screen during playback (the STILL mode).
Press PAUSE/STILL button during playback.
Only tapes recorded in the SLP mode will show the least amount of lines.
Press PLAY button to return to playback.
NOTES:
• Usually there will be video "noise" lines (black and white streaks or dots) on the screen.
This is normal.
If the tape was originally recorded in SP or LP mode, the still picture will be black and white in addition to the "noise" lines.
This is not a fault of the machine, but merely a by-product of the technology involved in producing a TV/VCR with LP mode.
• If it is left in the PAUSE mode for more than five minutes, the TV/VCR will automatically switch to
the STOP mode.
I NOISE CANCEL (in the STILL mode)
This feature allows you to reposition or reduce the noise lines of a still picture.
Press PAUSE/STILL button so that the noise lines change position on the screen and you can see the picture in its entirety without distracting noise lines.
NOTE: This feature can be activated ONLY when viewing a tape recorded in the SLP mode.
- 19EN
6DI1
Make sure ...
• Use the remote control lot the following steps.
• Power is turned on.
• Insert a pre-rccorded tape.
This function cuables you to improve the picture quality when playing back worn cassettes such as rental tapes.
The TV/VCR has an auto repeat function that allows you to repeat a tape indefinitely without using the PLAY button. There are two selections for Auto Repeat Playback.
ALL REPEAT: Repeats playback from the beginning to the end of the tape.
BLANK REPEAT:Repeats playback from the beginning to a blank part, which is blank for more than 10 seconds.
Press MENU button to move to
TIMER
SETI"IHG
PROGRAMMING
P,CTU,ECONTROL
CLOCK
"USER'S SET UP" and press ,. _R'_N_S_+UP_R._,Up
I LANGUAGE
CAPTION
ENGLISH
[C_PTION1] SELECT button.
NOTE: All buttons except POWER and STOP buttons do not work during Repeat Playback. Always set the Repeat Playback to [OFF] when not using this function.
2 Set "RENTAL" to [ON]
Press MENU button to move to
GAME MODE _1. [OIFF]
"RENTAL PLAY". Press CH •
RENTAL Im [ON]
PLAY 10_: F]% REPEAT or • button until [ON] appears.
II_ USER'S SET UP -
•
AUTO RETURN [OF_ J
1
I II_
1 Select "USER'S SET UP"
Press MENU button to move to [
"USER'S SET UP" and press
SELECT button.
r
....
o-
TIMER PROGRAMMING
S_,.G_OC_
..........
LANGUAGE
CAPTION
ENGLISH]
[C_PTtON 1]
TIME SEARCH
-.....
_,¢--.-o_
3 Exit the Rental setting
Press MENU button until the TV/VCR returns to the TV mode.
2 Select "ALL" or "BLANK"
Press MENU button to move to
"REPEAT PLAY".
Press CH • or • button until your desired selection [ALL] or
[BLANK] appears.
_ [O_F] / RENTAL I o:,::::°°2:1
4 Start playback
Press PLAY button to start playback.
"RENTAL
PLAYI_" appears.
• The Rental mode stays in effect until it is cancelled.
3 Exit the Repeat Play setting
Press MENU button until the TV/VCR returns to the TV mode.
TO CANCEL THE RENTAL MODE
Repeat steps [1] and [2], selecting [OFF]. Press MENU button to return to TV mode.
4 Start playback
Press PLAY button to start the Repeat Play. "REPEAT
PLAY I_" appears.
• The Repeat Play mode stays in effect until it is cancelled.
• If the Rental mode is set [ON], the "RENTAL
PLAYI_" display has priority.
TO CANCEL THE REi'EA T PIA Y MODE
Press STOP button to stop playback. And repeat steps
[1] and [2], selecting [OFF]. Press MENU button until the TV/VCR returns to the TV mode.
- 20 EN
6D11
Make _ure ...
• Use the remt)tc ct).t_t)l lt)_ the lolk)_xiJ_g _tcps.
• Power is turned on.
• Insert a tape.
This feature can be used to memorize the beginning point that you want to review. You can search for it easily by rewinding or fast forwarding.
NOTES:
• If the All Repeat or Blank Repeat is set to [ON], the
Counter Memory function does not work.
• If the counter is not displayed, the Counter
Memory will not be activated. Press C.MEMORY
button so that the counter appears on the display.
1
Stop tape at desired point
Rewind or fast forward the tape to the beginning point where you want to review.
Press C.RESET
button to reset the counter to 0:00:00
The Time Search function makes it possible to quickly advance the tape to your desired position from any position by entering the exact amount of playback time of the part that you want to skip.
NOTES:
• Time Search can be set up to 9 hours 50 minutes
(9:50) in 10 minutes increments.
• This function is not operative in recording mode.
• Counter Memory function cannot be used in this mode.
• This function only works when a cassette tape is inserted in the TV/VCR.
In the example below: A program is viewed 2 hour 50 minutes from the present position of the tape.
2 Select Counter Memory mode
Press C.MEMORY
button so that "MEMORY" appears on the display.
1 Select"TIME SEARCH"
Press MENU button to move to
"TIME SEARCH" and then press SELECT button.
TIMER
PICTURE
PROGRAMMING
CONTROL
SEI_ING
CHANNEL
CLOCK
SET UP
USER'S SET UP
LANGUAGE
TIME
[E NGLISHI
-MENU-
CAPTIONI]
SEAI_CH
3 Begin recording or playback
Press RECORD or PLAY button.
Press STOP button to end recording or playback.
2
Enter your desired time
Press CH • or • button until your desired time appears.
EXAMPLE: 2:50 = 2 hrs 50 rain
I mTikql_ S_A P_H j2 :_ 0%.
4 To activate the Counter Memory
Press REWIND (or F.FWD) button.
The tape will automatically stop when the counter returns to 0:00:00
(approx.).
7D CANCEL 17tE COUNTER
First press C.MEMORY to display the counter on the
TV/VCR screen. Then, press
C.MEMORY continuously until
"COUNT" appears.
MEMORY
3 Begin Time Search
Press REWIND or EFWD button.
The tape will move
to the specified point in time.
The time counts down as the search progresses.
When
0:00 is reached, the tape automatically starts playback.
1"0 CA NCEL THE TIME SEARCH
Press STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time.
- 21 EN
6DI1
Make sure ...
• Power is turned on.
• The erase-prevention tab is still intact on tile cassette tape.
• Rewind or fast forward the tape to the point where you want to begin recording.
You can only watch the same TV program that is being recorded.
Press the number buttons on the remote control or CH • or • button to select the channel to be recorded.
2
Press SPEED button to select the desired tape speed (SP/LP/SLP).
3
Press RECORD button
to begin /
recording.
The REC indicator flashes while recording,
|
_EC p
CH 10 ]
Press PAUSE/STILL button to (PAos_
REC indicator blinks.
temporarily stop recording. The l's.....
RECORD button to resume recording.
NOTES:
• To prevent tape damage, after five minutes, the
TV/VCR will automatically return to the Recording mode.
• When in the PauselStill mode, a display showing 5
"I" marks will appear on the screen. Each "I" mark represents one minute of Pause time. You may refer to this display for remaining pause time available.
• If "CLOSED CAPTION [ON]" is selected from the
"CLOSED CAPTION SET UP" menu, the
On-Screen Display will appear for 5 seconds, then disappear.
• If you want to check the remaining pause time available using the On-Screen Display, press the
SELECT button. The On-Screen Display again will disappear after 5 seconds.
4
Press STOP button when recording is completed.
- 22EN
61) 11
This function enables you to set a recording length simply by pressing RECORD/OTR button on the
TV/VCR.
Make sure...
• Power is turned on.
• The erase-prevention tab has not been removed.
NOTE: This function CANNOT be done from the remote control.
Connect your TV/VCR and a Source (Playing) VCR using the following diagram.
Your TV/VCR
AUDIO VIDEO o
RECORD 1 Select the channel to be recorded
Press number buttons on the remote control or the
CHANNEL • or • button.
2 Begin OTR
Press RECORD/OTR button on (,T,_....
the TV/VCR as many times as needed.
The recording length will be determined by the number of times you press
RECORD/OTR button.
p
Each additional push will increase the recording time by
30 minutes up to 8 hours.
Push(es)
1 push
2 pushes
3 pushes
Display
0:30
1:00
Recording length
(normal recording)
30 minutes
60 minutes
Audio/Video adapter cords
(not supplied)
VIDEO
@ @
OUT
@
J
Source (Playing) VCR
17 pushes
18 pushes
8:00 480 minutes
(normal recording)
HINTS:
• Recording starts immediately when the REC/OTR button is pressed.
• When REC/OTR button is pressed 18 times, the
TV/VCR switches back to the Normal Recording mode.
• To stop the OTR operation, press STOP button on the
TV/VCR or on the remote control.
• To show the remaining time, press SELECT button until "OTR" appears on the TV screen.
• Recording stops when 0:00 is reached.
• Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T- 160 (or 6 hours using T- 120).
• If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, eject the tape and the TV/VCR power will turn off.
1) Insert a pre-recorded video cassette into the Source
(Playing) VCR.
2) Insert a blank video cassette, or one you want to record over, into the TV/VCR.
3) Press SPEED button to select the desired recording speed (SP, LP or SLP).
4) Press CHANNEL • or • button until "AUX" appears on the screen.
5) Begin playback of the tape in the Source (Playing)
VCR.
6) Press RECORD button on the TV/VCR.
NOTE: For best results during dubbing, use the
TV/VCR's front panel controls whenever possible. The remote control might also affect the Source (Playing) VCR's playback operation.
- 23 EN
6Dll
i
TIMER
You may set the TV/VCR to record while you are away.
You can set 8 programs to record on a specific day, daily or weekly within a 1 year period.
In the example below, the timer is set to record at:
DATE:
SETTING TIME:
CHANNEL:
TAPE SPEED:
PROGRAM # :
MAY 6th, 1996
7:30PM
CH61
LP
4 to 8:50PM
NOTE: Use the remote control for this procedure.
Make sure ...
• Be sure the clock is set to the correct time and date before setting the timer.
Avoid over lap of programs...
There is a case that a program will not be performed.
when programs overlap;
• The program with an earlier start time has priority.
• Once the earlier program finishes, the overlapping programs will begin recording in sequence.
• The illustration below demonstrates the sequence of recordings.
Program 1
Program 2
Program 3
10:00AM11:00AM
9:00AM - 10:00AM
9:30AM - 12:00PM
Program 1
IO:00AM
Recording Sequence
'
_=
1 Select "TIMER PROGRAMMING"
Press MENU button to move to "TIMER PROGRAM-
MING" and press SELECT button.
• If"SETTING CLOCK" appears, follow page 15 to set clock and repeat from step
[31.
I_.
_..... o_......
PICTURE CONTROL s_........
CHANNEL SET UP
USER'S SET UP
CAPTIoNLANGUAGE[c_PTICHljENGLISH]
-MENU-
, ....... CH
2 Select the program number (1~8)
/
The remaining program numbers [P.O_NA_
do not flash.
PressCH • or • button until the
L desired number appears and press SELECT button.
EXAMPLE: 4
ATE --_-- _S_!%
J
END TIME
CHANNEL
TARTTIME
APE SPEED
--
-
- - : ....
-
3 Select once, every day, or weekly recording
For once recording : _..O_RA%N_"=
Press CH • button until your |°ATE_,_o_o_-
SIS _m TIME -: ....
SELECT button.
_'N_EE --
EXAMPLE: 05106 = May 6
For every day recording: To record a TV program at the same time on the same channel every day.
(Example: Monday through Sunday)
"] Press CH • button until _P,O_RA_,,W,
"EVERY DAY" appears and IC`'E --_E]Y]A_¢ press SELECT button.
:_,_E _:_-__
Program 2
9:00AM - 11:00AM i
I
I
!
',1 '
I
=
= i
I
9:00AM 10:00AM 11:00AM 12:00PM
*Recording period is SHADED
For weekly recording : To record a TV program at the same time on the same channel every week.
(Example: Every Monday on channel 7 at 5:00PM
Press CH • button until (P,O_RAMN_ ,
"EVERY" with your desired /°"E ._E,_S,T.
day of the week appear I S'A"_T'_ .......
together and press SELECT L: _-
- 24 EN
6Dll
4 Set start hour
Press CH • or • button until your desired hour appears and press SELECT button.
EXAMPLE: "7,PM" = 7:30PM
DATE 05106 MON
4 ROGBAM NUMBER ."
IE......
/X__s_!'_
-
)
70 Exit the program mo0e
Press SELECT button. Program 4 is now completed.
To set another program, repeat steps [1] to [10].
5 Set start minute
Press CH • or • button until your desired minute appears and press SELECT button.
EXAMPLE: "30" for 7:30PM
DATE
PROGRAM
05/06
NUMBER
MON
4
START _ME
CHANNEL
END
TAPE
TIME
SPEED
_ 30
- -
--
- -
:
6 Set end hour
Press CH • or • button until your desired hour appears and press SELECT button.
EXAMPLE: "8,PM" = 8:50PM
DATE 05/06 MON
IIS ROGRAM NUMBER 4
..... E ..tV_,Y,
CHANNEL
TAPE SPEED
_l_
- i
•
7 Set end minute
Press CH • or • button until your desired minute appears and press SELECT button.
EXAMPLE: "50" = 8:50PM
DATE 05106
I 'ROQRAM NUMBER
MON
4
I
IEND"MEO*_O_
CHANNEL
-|
TAPE SPEED - -
11 Set the timer
Press POWER button to set automatic timer recording.
The TIMER REC indicator lights up.
• You must turn off the TV/VCR to activate automatic timer recording.
If power is not turned off and you continue watching
TV, "TIMER REC STANDBY" will start flashing on the TV screen 2 minutes before the programmed start time.
TO CORRECT A PROGRAM
While setting a program; press ADD/DELETE button to go back one step, and enter correct numbers using CH • or • button.
After setting a program;
1) Press POWER button.
2) Repeat steps [1] - [2].
3) Press SELECT button (or press ADD/DELETE button to go back one step) until the part you want to correct begins flashing,then make the change.
4) Repeat steps [10] and [11].
Press CH • or • button until your desired channel number
E
B
.......
.....
PM
:50 PM END TIME ......
2_
_.T, s___%
EXAMPLE: CH61
9 Set the tape speed
Press CH • or • button until your desired tape speed appears.
EXAMPLE: LP
DATE 05106 MON f
START TIME
CHANNEL
O7:30 PM
NUMBER
08:50
1
4
PM
_TAPESPEED i
SB% ul
TO CANCEL AN A UIDMA TIC TIMER
RECORDING
While setting or after setting a program;
1) press POWER button.
2) Repeat steps [ 1] ~ [2] and select a program number you want to cancel.
3) Press ADD/DELETE button.
4) Press MENU button to return to the TV mode.
While recording is in progress;
1) Press POWER button.
2) Press STOP/EJECT button on the TV/VCR.
If you press POWER button to turn off before the end time, timer recording will continue to function.
Repeat steps [ 1] ~ [2], select the program number you want to cancel and press ADD/DELETE button.
Press MENU button to return to the TV mode.
- 25 EN
6DII
1) Press POWER button so that the REC indicator goes off.
2) Press MENU button on the remote control.
3) Press MENU button to point to "TIMER
PROGRAMMING".
4) Select a program number you want to check. The details of selected program will appear on the TV screen.
5) Press MENU button. The TV screen returns to the
TV mode.
With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically.
1 Select "USER'S SET UP"
Press MENU button to move to
"USER'S SET UP".
I_
TIMER
PICTURE
PROGRAMMING
CONTROL
SETTING
CHANNEL
CLOCK
SET UP
USER'S SET UP
LANGUAGE ENGLISH]
CAPTION [C_,_TION 1 ]
TIME -MENU-
HINTS:
• Make sure the channel you want to record is properly set in advance.
• If you are recording using a Timer mode, you may not operate the unit manually.
• Recording begins automatically at the Start time.
• It is not necessary to press RECORD button for timer recording.
• The erase-prevention tab on the cassette must be in place (or you must put tape over the hole).
• If the erasure protection tab is removed, the cassette will be ejected when the POWER button is pressed to off.
• If the tape runs out before the end time, the TV/VCR will switch to the STOP mode immediately, and the tape will be ejected.
2 Set "AUTO RETURN" to [ON]
/
Press MENU button to point to [ -usE,.sSET
Press CH • or • button until
[ON] appears.
3 Auto Return will begin
RENTAL [OFF]
,
REP_ _qr_
A_OR_OR.
When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the recorded program(s).
NOTES:
• If you press POWER button while tape is rewinding, the Auto Return will stop.
• The Counter Memory function cannot be used in this mode.
- 26 EN
6DI 1
The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired time period of time.
Press SLEEP button on the remote control until your desired sleep time appears.
Each additional push will increase the recording time by 30 minutes up to 120 minutes.
SLEEP 120 MINUTE I
The alarm function enables you to turn on the TV/VCR without using the POWER button after a desired time period.
1 Select ALARM mode
Press ALARM button on the remote control.
_1 IIII J i
ALARiI_I 1 2:0
,ll'l
0 AM
I I _
1 push
2 pushes
3 pushes
4 pushes
5 pushes
6 pushes
DISPLAY
0 MINUTE
30 MINUTE
60 MINUTE
90 MINUTE
120 MINUTE
0 MINUTE
SLEEP TIME
0 minute
30 minutes
60 minutes
90 minutes
120 minutes
0 minute
TO CANCEL TIlE SLEEP TIMER
Press SLEEP button until "SLEEP 0 MINUTE" appears.
2 Select the alarm time
Press CH • or V button until your desired time is appeared and press SELECT button.
EXAMPLE: 7:30AM
_1 II I1 w
3 Confirm the alarm time is correct.
To check alarm time, press ALARM button.
When
"ALARM OFF" appears on the screen, repeat steps [1] and [2].
_1 II 1
ALARM=.0 7 : 3OAM 11_
4" I II _J
4 Activating the alarm timer
Press ALARM button again.
"ON" appears next to the alarm time on the screen.
The TV/VCR will turn on automatically at the set time.
ALARM 0 7:30AM I
TO (/ANCEL THE ALARM TIMER
Press ALARM button so that
"ALARM OFF" appears on the screen.
- 27EN
6D11
i KO _ bLi_iiOO 1 1_ tJ is Is iiib
If you have thoroughly read this instructions manual and are still having some difficulties operating your TV/VCR, the chart below will help you to locate the problem and give you corrective measures to fix it. Find which symptom best matches the difficulty you are experiencing and use the information in the columns on the right to remedy the problem.
SYMPTOM
No power.
POSSIBLE CAUSE
• AC Power cord is not connected.
• POWER button is set to OFF.
CORRECTIVE ACTION
• Connect AC power cord to AC outlet.
• Set the POWER button to ON.
No picture and sound.
• No channel in memory.
• Antenna is not connected.
• Program tuner's memory.
• Check antenna connection.
No picture or poor
picture on TV/VCR.
• TV/VCR is not plugged into an active AC outlet.
• Plug power cord into an active AC outlet.
• Direction or condition of antenna is not adequate.
Adjust direction or replace antenna.
No sound or poor sound.
• Picture control is not adequate.
• Volume control on remote control unit or main unit is in minimum position.
• Adjust picture controls.
• Adjust volume control on remote control unit or set.
• MUTE button on the remote control unit is in the ON position.
• Press MUTE button.
Timer recording is not possible.
• The timer recording is set incorrectly.
• Set the timer recording correctly.
• The timer recording is not set to ON.
• Set the timer recording to ON.
Cannot go into Record mode.
Playback picture is partially noisy.
• The erase-prevention is missing.
tab on cassette • Place plastic tape over missing erase-prevention tab.
• The TRACKING control is not set correctly.
• Adjust TRACKING control for better picture.
Noise in picture on playback.
• Video heads are dirty.
• Head cleaning is necessary, consult the nearest Sears Service Center.
No operation by infrared
Remote Control.
• No power to TV/VCR.
• Weak batteries.
• Make sure the AC cord is connected to an AC outlet.
• Check the batteries in infrared Remote
Control.
- 28 EN
6Dll
CLOSED CAPTION
PROBLEM
POSSIBLE REMEDY
My TV/VCR is showing captions
that are misspelled.
My TV/VCR will not show the text in its entirety or there is a delay of what is being said.
My captions are scrambled with white boxes on the TV screen.
My program guide listed a TV show as being closed captioned but none of the captions were displayed.
Although the tape box says it has closed captions, my pre-recorded video tape does not show any captions.
You are watching a live broadcast and spelling errors made by the closed captioning production company may pass through uncorrected. A pre-recorded program will not show any misspelled words because of the normal time available for editing the captions.
Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts. Most captioning production companies can display a dialogue to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-to-date with the current TV screen dialogue.
Interference caused by building, power lines, thunderstorms, etc. may cause scrambled or incomplete captions to appear.
Broadcasters may at times use a time compression process to speed up the actual program so that additional advertising time can be given. Since the decoder cannot read the compressed information, captions will be lost.
The video tape was either an illegal copy or the tape duplicating company accidentally left out the captioning signals during the copying process.
My TV screen shows a black box You are in the TEXT mode. Select CAPTION mode or CAPTION [OFF].
on certain channels.
MAINTENANCE
CABINE T CLEANING
• Wipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in lukewarm water and wrung dry.
• Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces.
SER VICING
• Should your TV/VCR become inoperative, do not try to correct the problem by yourself. There are no userserviceable parts inside. Turn off, unplug the power cord, and take the unit to the nearest Sears Authorized
Service Center for servicing.
HEAD CLEANING
• Picture playback may become blurred or interrupted while the TV program reception is clear. This does not mean that the recorded program has been erased.
Dirt accumulated on the video heads after long periods of tape playback, or the usage of rental or worn tapes can cause this problem. In this case, video head cleaning requires highly technical attention, therefore consult the nearest Sears Authorized
Service Center. Clean heads only when problems occur.
- 29 -
EN
6DII
51q_.,Lli_ iLA i iON 5
(iI_AI:t(A L ,51)i:(.It' I(.A
1 IONS
CRT :
Television system :
Closed caption system :
Video Heads :
Tape width :
Tape speed
SP :
LP :
SLP :
Tuner channel
TV VHF Low :
TV VHF High :
TV UHF :
CATV
VHF :
MID band :
SUPER band :
HYPER band :
Terminals
Antenna input :
13 inch in-line gun,
90 ° deflection tube
NTSC-M
§15.119/FCC
Rotary two-head
1/2 inch
33.40mndsec.
16.67mm/sec.
11.12mm/sec.
#2-#6
#7-#13
#14~#69
5A
A5~A1, A~I
J~W
W+l ~W+84
Video input :
Audio input :
Earphone :
VHF/UHF 75 ohms unbalanced
RCA connector x 1
RCA connector x 1
1/8" monaural (3.5 mm)
ELECTRICAL 5t'15C1i,1CA t 107€5
Video input level :
Audio input level :
Video S/N ratio :
Audio S/N ratio :
0.5-2.0Vp_p
-15dBs
More than 46dB
More than 43dB
OTHER SPECIFICATIONS
Power requirement :
Power consumption :
Dimensions :
Weight :
AC 120V/60Hz
75W
H : 15-13/16" (402mm)
W : 15-3/16" (386mm)
D : 14-3/4" (375mm)
27.56 lbs (12.5 kg)
• Designs and specifications are subject to change without notice and without our legal obligation.
- 30 EN
6DI1
OWNER'S
MANUAL
MODEL NO.
SRV1320S
tWARRANTY I
TV/VCR COMBINATION
LIMITED WARRANTY
This product is exclusive to and is warranted solely by
Sears. For 90 days from the date of purchase, Sears will repair any defect in material or workmanship in this TV/VCR combination, free of charge. For one year from the date of purchase, Sears will supply, at no charge, replacement for defective parts.
This above warranty coverage applies only to TV/VCR combinations which are used for private household purposes.
LIMITED WARRANTY ON PICTURE TUBE
After one year from the date of purchase and up to two years, Sears will furnish, free of charge, a replacement for the picture tube, if defective. You pay for labor.
Warranty service is available by returning the TVNCR combination to the nearest Sears Service Center/Department in the United States. This warranty applies only while this product is in use in the United States. For service after the warranty expires, it is recommended that this product be returned to the nearest Sears Service Center.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sold by Sears, Roebuck and Company, Dept.817WA
Hoffman Estates, IL 60179
Printed in Malaysia
0EMN01136
B5705UF *#r***

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- 13" Color TV/VCR Combination
- Remote Control
- Closed Caption System
- Time Search
- Three tape speeds (SP/LP/SLP)
- OTR (One Touch Recording)
- Timer recording (8 events)
- Auto rewind