Coopers 8845 Instructions

Coopers 8845 Instructions

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Manual
Coopers 8845 Instructions | Manualzz

2400W Vacuum Cleaner

8845

Instructions

Handle

Air intake control slide button

Crevice tool

Round brush

Steel extension tube

Hose

Floor brush

Filter cover

Power switch

Dust full indicator

Hose vacuum connector

Speed control slide button

Fore cover release button

Carry-handle

Cable winding button

Please read carefully before use and retain for future reference.

Warning

• Read the instructions carefully.

• This unit is for domestic use only. Use as described in this instruction booklet.

• Before using the unit, check that the mains power voltage corresponds to the voltage shown on the rating plate.

• Do not use the unit to vacuum liquids, sharp items such as broken glass, hot ash etc.

• Keep the vacuum cleaner away from stoves and heatemitting appliances. Heat can deform and discolour the plastic parts of unit.

• Do not block the flow of air.

Blocking suction or allowing dust to clog the hose will decrease the efficiency.

• Do not run the unit over the power cable.

• Always remove the plug from the power socket when the unit is not in use and before carrying out any cleaning or maintenance operations.

• Check the hose before use.

• If the supply cord is damaged in any way do not use.

• Never use spirits or other solvents to clean the unit.

Only use a damp cloth and surface wipe clean only

• Never leave the unit unattended when it is switched on. Keep the unit out of the reach of children or the infirm.

• Do not use the unit without a dust bag or filters.

Empty regularly for optimum performance.

How to use

1. Ready for use

Connect the extension tube to the hose and connect to the main body of the vacuum. Fix your chosen brush to the steel tube.

2. Operation

• Before using the unit, unwind the cable and insert the plug into the power socket. A yellow mark on the power cable shows the ideal cable length. Do not extend the cable beyond the red mark.

• Press the ON/OFF button to switch the unit on. Press it again to turn off.

• Slide the air intake control button on the handle to adjust the suction. The greater the air intake the smaller the suction.

• Choose a suitable suction according to the surface to be cleaned. Also adjust the speed control slide button.

• For carpet use minimum air intake for powerful suction.

• For hard floors use medium air intake for normal suction.

• For fabric, curtains, sofas etc.

use maximum air intake for soft suction.

3. Using the cleaning accessories

• On the Floor brush there are

2 settings. Press down the button with mark “ ”and then use the brush with the bristles extended for hard floors.

• Press down the button with mark“–”and then use the bristles retracted for carpet.

• Round brush for cleaning smaller areas such as stairs.

• Crevice Tool for cleaning edges and hard to reach places.

4. Turn off the appliance and wind in the cable

• Each time after cleaning, press the on/off switch first and then remove the power plug from socket. To rewind the power cable, press the rewind button with one hand, and guide the cable with your other hand to ensure that it does not cause damage when winding in. It will wind quite quickly!

Protective Device

• The indicator will become red when the air flow is obstructed or the dust bag is full. At that time, you should shut off the power, and clean the blockage or empty the dust bag. Then switch it on again. It is normal when the indicator is green.

How to maintain

1. Emptying the dust bag

• After removing the hose, open front cover by pressing the button and pulling upwards.

• Press the dust bag button backward and remove the dust bag.

• If the fabric bag is not in good condition, slide the plastic support from the top and dispose of the dust bag. Additional bags are available to purchase from Customer Services on

0844 482 4400 or www.coopersofstortford.co.uk

(while stocks last). Item code 8847.

• If the cloth bag is still ok, slide the plastic support from the top and empty.

2. Installing the dust bag

• Slide the plastic support onto the top of the dust bag. Position the dust bag correctly in its compartment.

3. Cleaning the filter

• If the filter is dirty, remove the filter.

• To clean or replace the air outlet filter, first detach the grille by pulling firmly away from the appliance.

• Remove the HEPA filter by opening the HEPA cover in the base.

• Wash carefully in liquid or water. Allow the filter to dry completely before replacing it.

Notice: Neither wash the cloth bag in washing machine nor dry it by electric heater, instead wash it in warm water and dry in natural air.

4. Clean the unit and accessories

• Do not clean the body of vacuum cleaner with anything other than a barely damp cloth.

• Clean the debris adhering to the floor brush with an old toothbrush every month.

5. Storing the vacuum cleaner

• Plug the orientation pin on the floor brush into the orientation hole in the main body.

Troubleshooting

Problem

Motor doesn’t work

Cause

The plug is not plugged in or switched on

Suction decrease The filter is blocked

Unit heats

Resolve

Plug in and switch on

Clean it

The bag is full Replace the bag or empty the bag

The flexible hose Check and clear or extension tube all blockages is blocked

Getting warm is normal. If the heat is excessive, turn off immediately and discontinue use

Technique parameter

Model No.

8845

Power

2400W

Voltage

220-240V

Frequency

50-60Hz

Packaging

Dispose of the packaging at your local recycling centre.

Dispose of paper and card separately from plastic bags at your local recycling centre.

Dispose of the item at the end of its lifespan at your local authorised household waste recycling centre.

DECLARATION OF CONFORMITY

We, The Enterprise Department Ltd.

Of 11 Bridge Street, Bishop’s Stortford,

Hertfordshire, UK. CM23 2JU in accordance with the following Directive(s):

Electromagnetic Compatibility 2004/108/EC

EN 55014-1:2006+A1:2009+A:2011

EN 55014-

2:1997+A1:2001+A2:2008

EN 61000-3-

2:2006+A1:2009+A2:2009

EN 61000-3-3:2008

Low Voltage Directive 2006/95/EC

EN 60355-2-

2:2010+A11:2012+A1:2013

EN 60335-1:2012

EN 62233:2008

2400W Vacuum Cleaner

Model number: 8845 ( H5501)

Hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced specifications.

The unit complies with all applicable Essential

Requirements of the Directives.

Mr. Stuart Fowler

Imports Director

December 2013

advertisement

Related manuals

Download PDF

advertisement