KWorld ATSC 340U Installation Manual

Add to my manuals
10 Pages

advertisement

KWorld ATSC 340U Installation Manual | Manualzz

PlusTV Stick ATSC 340U Installation Manual

Contents

V1.0

Chapter 1: PlusTV Stick ATSC 340U Hardware Installation ............................................................................ 2

1.1 Package Contents ................................................................................................................................. 2

1.2 System Requirements........................................................................................................................... 2

1.3 Hardware Installation........................................................................................................................... 2

Chapter 2: PlusTV Stick ATSC 340U Quick Installation .................................................................................. 3

2.1 The Driver Installation of PlusTV Stick ATSC 340U ..........................................................................4

2.2 TotalMedia Application Installation..................................................................................................... 4

2.3 The Remote Installation of PlusTV Stick ATSC 340U ........................................................................6

Chapter 3 : PlusTV Stick ATSC 340U Quick Uninstallation............................................................................ 7

3.1 The Driver Uninstallation of PlusTV Stick ATSC 340U ..................................................................... 7

3.2 TotalMedia Application Uninstallation ................................................................................................ 7

3.3 The Remote Uninstallation of PlusTV Stick ATSC 340U ................................................................... 8

Chapter 4 : FAQ ............................................................................................................................................... 10

4.1 How to check if the driver has been installed successfully or not? ...................................................10

4.2 How to check if the Remote Control can work fine?.........................................................................10

4.3 How to uninstall all of device driver and software utility?................................................................ 10

1

Chapter 1: PlusTV Stick ATSC 340U Hardware Installation

1.1 Package Contents

Unpack your PlusTV Stick ATSC 340U package and make sure that all items are included. The following items should be included in your package: z PlusTV Stick ATSC 340U z Quick Start Guide z Installation CD z ATSC Antenna z Remote control (Optional)

1.2 System Requirements

z Pentium-IV 2.4GHz or above (3.0GHz above recommended for HDTV programs) z 256MB RAM of system memory or above (512MB recommended) z Graphics card (Must support Microsoft DirectX 9.0 or above, high-end Graphics Card with DX-VA feature recommended for HDTV programs) z Sound card (AC97 Compatible Sound Card) z 1 available USB 2.0 port z 1GB free HD space z CD-ROM drive (For software installation) z Outdoor antenna for better ATSC and analog TV reception z Windows® XP(SP2) / Windows XP MCE 2005 / Windows Vista

1.3 Hardware Installation

Follow the steps shown below for installation of your TV Box and use the pictorial guide below for peripheral connections.

1.

Plug a cable for Analog and ATSC TV reception into the TV connector on PlusTV Stick ATSC 340U TV box.

2.

Connect the PlusTV Stick ATSC 340U TV box hardware to your laptop or desktop PC using a USB 2.0 port.

-2-

Chapter 2: PlusTV Stick ATSC 340U Quick Installation

The PlusTV Stick ATSC 340U Box package comes with complete Windows software utilities. These utilities can be found on the installation CD included in the package. Before installation, we recommend that you exit all background programs. These include applications such as anti-virus software and system monitoring applications.

1.

Once you finish the hardware installation, restart your system. A window labeled: “

Found New

Hardware Wizard ” will connect to Windows

Update to search software. Choose “

No, not this time

” and click “

Next

: to run the utilities setup included in the CD.

2.

Click “

Cancel

”, we must install from CD to have completed set up.

3.

Insert the installation CD into the CD ROM device. The autorun page will appear as the left image. Please choose “

Quick Installation

.

-3-

4.

The Quick Installation provides you with two choices to install. If you want to install device driver and software utility completely, please choose “ Typical Installation ”. or if you want to install them partially, please choose “

Custom

Installation ”. Finally click “ Install ” to continue.

2.1 The Driver Installation of PlusTV Stick ATSC 340U

5.

Click “ Start ” to install the PlusTV Stick ATSC

340U BDA driver. Please wait, while the installation is in process.

6.

Now the driver has been installed successfully on your computer and click “ OK ” to finish driver installation and go to next step.

2.2 TotalMedia Application Installation

7.

The InstallShield Wizard will guide you through installation of

TotalMedia

application. Click

“Next” to continue.

-4-

8.

Click

Yes” accept all the terms of the proceeding License Agreement to install

TotalMedia

.

9.

Please choose the destination folder where you want to install the files. You can click “ Browse ” to change the destination folder. Finally click

“ Next ” to go to next step.

10.

Setup will add program icons to the Program

Folder’s list. You may type a new folder name, or select one from the existing folders list. Click

Next

” to start installing. Please wait while installation in process.

11.

When the message as the one on the left image, click “ Finish ” to end the installation.

Note:

For more detailed TotalMedia instruction, please refer to the TotalMedia HELP.

-5-

2.3 The Remote Installation of PlusTV Stick ATSC 340U

This step will instruct you to install the remote utilities of PlusTV Stick ATSC 340U. Please follow the steps below for installation.

12.

The InstallShield Wizard will guide you through installation of PlusTV Stick ATSC 340U remote utilities. Click “

Next

” to continue.

13.

PlusTV Stick ATSC 340U utilities have been installed. Please click “

Finish

”.

14.

All the drivers have been installed successfully.

Please choose “

Yes, I want to restart my computer now ” to restart your computer

(

Recommend

) and click “

Finish

” to end the installation.

-6-

Chapter 3

PlusTV Stick ATSC 340U Quick Uninstallation

1.

If you want to uninstall device driver and software utility, please click “

Quick Uninstallation

”.

Note : You can also take another way to uninstall device driver and software utility, please refer to chapter 4 FAQ 3.

2.

The Quick Uninstallation provides you with two choices to uninstall. If you want to uninstall device driver and software utility completely, please choose “

Typical Uninstallation

”. or if you want to uninstall them artially, please choose “

Custom

Uninstallation ”. Finally click “ Uninstall” to continue.

3.1 The Driver Uninstallation of PlusTV Stick ATSC 340U

3.

Click “

OK

” to uninstall the PlusTV Stick ATSC

340U BDA driver. Please wait, while the uninstallation is in process.

4.

Now BDA driver has been removed successfully on your operation system and click “

OK

” to go to next step.

3.2 TotalMedia Application Uninstallation

This step will instruct you to uninstall TotalMedia Application. Please follow the steps below for uninstallation.

-7-

5.

This step is going to remove TotalMedia application. If yes, please select “Remove”item and click “

Next

”.

6.

This step is to confirm that if you really want to remove TotalMedia application. If yes, please click “

OK

”.

7.

When the windows as the one on the left image, it means the TotalMedia has been removed completely. Please click “ Finish ” to end.

3.3 The Remote Uninstallation of PlusTV Stick ATSC 340U

This step will instruct you to uninstall the remote utilities ofPlusTV Stick ATSC 340U. Please follow the steps below for uninstallation.

8.

This message notices you again to make sure whether you really want to remove utilities. Please click “ Yes ” to execute removing.

9.

The remote function has been successfully removed. Please click “ OK ”.

-8-

10.

All the drivers have been removed completely.

Please choose “ Yes,I want to restart my computer now.

” to restart your computer (

Recommend

) and click “ Finish ” to end the uninstallation.

-9-

Chapter 4 : FAQ

4.1 How to check if the driver has been installed successfully or not?

Ans :

Right click on “

My Computer

” on the desktop and choose “

Properties

”. Once in “Properties” window, click on “

Device Manager

” in Hardware panel. Click on the plus icon of “Sound, video and game controllers” to open the device list. See Fig. 1 below.

Fig. 1

4.2 How to check if the Remote Control can work fine?

Ans : 1) You have to check if the “Remote Control” utility is installed or not. Please refer to Fig. 2.

2) You have to check if the driver has been installed or not. See FAQ-2.

3) You can check if the “Remote Control” tray icon is loaded in the right-bottom of task bar.

See Fig.3.

below.

Fig. 2 Fig.3

4.3 How to uninstall all of device driver and software utility?

Ans : 1) You can put the installation CD into CD-ROM device to execute “

Quick Uninstallation

”.

2) You can also follow the step (Start Æ All Programs Æ KWorld Multimedia Æ Uninstallation) to

Uninstall. Please refer to

Fig.4

Fig.4

-10-

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement