Radiodetection rd7000+ User Manual
Radiodetection RD7000+ is a high-performance locator and transmitter designed to accurately locate and trace buried cables and pipes. With its advanced features, the RD7000+ is ideal for various applications, including utility mapping, fault finding, and potholing. The locator features a large, backlit LCD display with a depth and current indicator, allowing for easy reading even in challenging lighting conditions. The transmitter offers multiple modes of operation, including sonde, power, and induction, providing versatility for different job requirements.
Advertisement
Advertisement
User Guide
Guide d’utilisation
Handleiding
Bedienungsanleitung
Guía de usuario
1
RD7000+ locator
2
3
4
5
8
6
7
8 9
10 11 12
13
14
15
16
17
18 19 20 21
6
22 23
24
25
Locator features
4.
5.
1.
2.
3.
Keypad.
LCD screen.
Battery compartment
(USB connector inside).
Accessory socket.
Headphone jack.
Locator keypad
6.
Power key: Switches the unit on and off. Opens the locator menu.
7.
8.
9.
dNH\6HOHFWVIUHTXHQF\&ORVHV submenu.
Up and down arrows: Adjusts the
VLJQDOJDLQ6FUROOVWKURXJKPHQX options.
Antenna key: Toggle between antenna
PRGHV2SHQVXEPHQX3URORQJHG key press toggles between depth and current display on the LCD.
Locator display icons
10.
Bargraph: Indicates strength of locate signal and peak marker.
11.
Signal strength: Numerical indication of signal strength and dB reading when using Fault Find mode.
12.
3URSRUWLRQDO/HIW5LJKWDUURZV
Indicates the location of the line relative to the locator.
13.
Battery icon: Indicates the battery level.
14.
Volume icon: Displays the volume level.
15.
Fault-Find arrows
(PL and TL models only).
16.
5DGLR0RGH,QGLFDWHVZKHQ
5DGLR0RGHLVVHOHFWHG
17.
3RZHU0RGH,QGLFDWHVZKHQ
3RZHU0RGHLVVHOHFWHG
18.
Accessory indicator: Indicates when an accessory is connected and in use.
19.
A-Frame icon: Indicates when the
A-Frame is connected and in use.
20.
21.
Operating mode indicator.
Compass:
:KHQGHWHFWLQJOLQHVtVKRZVWKH direction of the located cable or pipe relative to the locator.
:KHQGHWHFWLQJVRQGHVtVKRZVWKH direction of the longitudinal axis of the located sonde relative to the locator.
22.
Indicates antenna selection.
23.
Sonde icon: Indicates that the unit is set to receive signals from sondes*.
24.
Line icon: Indicates that the unit is set to receive signals from lines*.
25.
Depth or current indicator.
7DNHFDUHWRVHW/LQH6RQGHDSSURSULDWHO\ otherwise the Compass display and depth display will be incorrect.
7
Preface
About this guide
This guide provides basic operating instructions for the RD7000+ locator and transmitter. It also contains important safety information and guidelines and as such should be read in its entirety before attempting to operate the RD7000+ locator and transmitter.
It is also highly recommended to register the RD7000+ locator and transmitter for the free 3 year extended warranty.
This guide is intended as a portable quick reference only. For detailed instructions, please refer to the RD7000+ operation manual, which can be viewed or downloaded from the Radiodetection website at: www.radiodetection.com
.
Having accessed the Radiodetection website, go to: Downloads > Cable and Pipe
Locators > User Manuals > RD7000+ Operation Manual.
WARNING! Direct connection to live wires is POTENTIALLY LETHAL.
#HQDBSØBNMMDBSHNMRØRGNTKCØADØ@SSDLOSDCØAXØETKKXØPT@KHÚDCØODQRNMMDKØNMKX×
WARNING! The transmitter is capable of outputting potentially lethal voltages. Take care when handling the terminals, connection leads and ground stake, notify other technicians working on the line of the hazard and guard exposed conductors to prevent accidental contact.
WARNING! This equipment is NOT approved for use in areas where hazardous gases may be present.
WARNING! When using the transmitter, switch off the unit and disconnect cables before removing the battery pack.
WARNING! The RD7000+ will detect almost all buried conductors but there are some objects that do not radiate any detectable signal.
The RD7000+, or any other electromagnetic locator, cannot detect these objects so proceed with caution. There are also some live cables which the RD7000+ will not be able to detect in Power mode. The RD7000+ does not indicate whether a signal is from a single cable or from several in close proximity.
4
Extended Warranty
Thank you for purchasing the RD7000+ locator and transmitter.
RD7000+ locators and transmitters are covered by a 1 year warranty.
Customers can extend the warranty to 3 years by registering each product.
Registration and extended warranty are free and once registered users will be entitled to free software updates through Centros Manager t .
To be eligible, customers must register each product within 3 months of purchase.
6QPOSFHJTUSBUJPODVTUPNFSTXJMMSFDFJWFDPOÙSNBUJPOPGSFHJTUSBUJPOCZ email and this email will include a download key, this key will be required for software updates to your RD7000+ locator and transmitter.
8IFOOFXTPGUXBSFJTSFMFBTFESFHJTUFSFEVTFSTXJMMSFDFJWFBOPUJÙDBUJPO email that links to the new software download page on the Radiodetection website.
To register for extended warranty go to: www.radiodetection.com/extendedwarranty
eCAL
™
eCAL is a novel Radiodetection technique that allows the user to validate the original factory calibration of the RD7000+ locator, providing the user with the
DPOÙEFODFUIBUUIFMPDBUPSDPOUJOVFTUPNFFUJUTPSJHJOBMGBDUPSZDBMJCSBUJPO eCAL also carries out a functional test on the locator providing the user with
UIFDPOÙEFODFUIBUUIFMPDBUPSDPOUJOVFTUPQSPWJEFUIFTBNFQFSGPSNBODF
BTJUEJEXIFOJUÙSTUMFGUUIFGBDUPSZF$"-DBOCFDBSSJFEPVUPOTJUFXJUIPVU the need to return the locator to a service centre, saving time and expense.
Each time the locator passes eCAL, the user can view or print a dated eCAL
WBMJEBUJPODFSUJÙDBUF
For a more detailed explanation of eCAL, please go to the eCAL section on page 16.
5
Tx-1, Tx-3 and Tx-10 transmitters
1
2
3
4
5
8
13
14
15
16
10 11
7 6
12 17
18
19
9
8
20
1.
2.
3.
Transmitter features
Keypad.
LCD.
5HPRYDEOHDFFHVVRU\WUD\
Transmitter keypad
4.
Power key: Switches the unit on and off. Opens the transmitter menu.
5.
6.
dNH\6HOHFWVIUHTXHQF\
0HQXQDYLJDWLRQNH\
Up and down arrows: Adjusts the output level signal. Scrolls through the menu options.
7.
0HDVXUHNH\7RJJOHVPHDVXUHPHQW display between volts and current or resistance and power (Note: displayed measurements are based on the currently selected mode or the attached accessory, if applicable)
2SHQVDVXEPHQX
Transmitter screen icons
8.
9.
10.
Battery icon: Indicates the battery level.
Selected operation mode.
Standby icon: Appears when the
WUDQVPLWWHULVLQ6WDQGE\0RGH
11.
Output level: Displays transmitter output level.
12.
Clamp icon: Indicates when a clamp is connected.
13.
External 12V DC icon: Appears when the transmitter is powered from an external 12V DC source.
14.
Induction indicator: Appears when the
WUDQVPLWWHULVLQ,QGXFWLRQ0RGH
15.
A-Frame: Indicates when the
WUDQVPLWWHULVLQ)DXOW)LQG0RGH
(Tx-3 and Tx-10 models only)
16.
&'0RGHLQGLFDWRU,QGLFDWHVWKDWWKH
17.
WUDQVPLWWHULVLQ&XUUHQW'LUHFWLRQ0RGH
(Tx-10 model only)
Voltage warning indicator: Indicates that the transmitter is outputting potentially hazardous voltage levels.
18.
Volume icon: Displays the volume level.
19.
Pairing icon (Tx-3B and Tx-10B only).
)RUXVHZLWK5'ORFDWRUVRQO\
20.
Bluetooth ® icon (Tx-3B and Tx-10B
RQO\)RUXVHZLWK5'ORFDWRUV only.
9
Before you begin
IMPORTANT! Please read this section before you attempt to operate the
RD7000+!
System setup
It is important that you set up the system according to your personal preferences and
RSHUDWLQJUHTXLUHPHQWVIRU\RXUFRXQWU\EHIRUH\RXFRQGXFW\RXUÛUVWVXUYH\<RXFDQ
VHWWKHV\VWHPXSXVLQJWKH5'PHQXDVGHVFULEHGEHORZ
Using the menu
s s s s s s s s
7KH5'ORFDWRUDQGWUDQVPLWWHUPHQXVDOORZ\RXWRVHOHFWRUFKDQJHV\VWHP
RSWLRQV2QFHHQWHUHGWKHPHQXLVQDYLJDWHGXVLQJWKHDUURZNH\V1DYLJDWLRQLV
FRQVLVWHQWRQERWKWKHWUDQVPLWWHUDQGWKHORFDWRU:KHQLQWKHPHQXPRVWRQVFUHHQ icons will temporarily disappear and the menu options will appear in the bottom left-hand
FRUQHURIWKH/&'1RWHWKDWZKHQEURZVLQJWKHORFDWRUPHQXWKH and keys act as left and right arrows. When browsing the transmitter menu the and keys act as left and right arrows. The right arrow enters a submenu and the left arrow accepts the selection and returns to the previous menu. s
Locator menu options
VOL: Adjust the speaker volume from 0 (mute) to 3 (loudest).
%$776HWEDWWHU\W\SH1L0+RU$/.
$/(57(QDEOHRUGLVDEOH6WULNH Alert w
.
)5(4(QDEOHRUGLVDEOHLQGLYLGXDOIUHTXHQFLHV
ANT: Enable or disable any antenna mode with the exception of Peak.
32:(56HWQDWLRQDOSRZHUIUHTXHQF\RU+]
LANG: Select your preferred system language.
CAL: Displays the date of the last factory calibration.
UNIT: Depth readings in metric or imperial units.
10 s s s s s s s s
To navigate the locator menu:
3.
4.
1.
2.
5.
6.
7.
First power up the locator.
0RPHQWDULO\SUHVVWKH key to enter the menu.
Use the or arrows to scroll through the menu options.
Press the NH\WRHQWHUWKHRSWLRQpVVXEPHQX
Use the or
DUURZVWRVHOHFWWKHUHTXLUHGVHOHFWLRQ
Press the key to accept your selection and return to the main menu.
<RXPD\FRQWLQXHWRVFUROOWKURXJKRWKHUPHQXRSWLRQVDQGPDNHVHOHFWLRQVXVLQJ instructions 3 to 6 above or alternatively momentarily press the key to exit the menu and return to the main operating screen.
s s
Transmitter menu options
VOL: Adjust the speaker volume from 0 (mute) to 3 (loudest).
%7(QDEOHGLVDEOHRUSDLU Bluetooth ® connections (Tx-3B and Tx-10B only).
0$;96HWWKHRXWSXWYROWDJHWR/2:RU+LJK
02'(/6HWWKHWUDQVPLWWHUWRZRUNZLWKDVSHFLÛFPRGHORI5'ORFDWRU
0$;36HOHFWDVSHFLÛFPD[LPXPRXWSXWSRZHU
%$776HWEDWWHU\W\SH$/.1L0+RU/LWKLXP,RQ
OPT F: Enable or disable SideStep auto w
.
LANG: Select the transmitter system language.
%2267%RRVWWUDQVPLWWHURXWSXWIRUDVSHFLÛHGSHULRGRIWLPH7[PRGHORQO\
)5(4(QDEOHRUGLVDEOHLQGLYLGXDOIUHTXHQFLHV
1.
4.
5.
2.
3.
6.
7.
To navigate the transmitter menu:
First power up the transmitter.
0RPHQWDULO\SUHVVWKH key to enter the menu.
Use the or arrows to scroll through the menu options.
Press the NH\WRHQWHUWKHRSWLRQpVVXEPHQX
Use the or DUURZVWRVHOHFWWKHUHTXLUHGVHOHFWLRQ
Press the key to accept your selection and return to the main menu.
<RXPD\FRQWLQXHWRVFUROOWKURXJKRWKHUPHQXRSWLRQVDQGPDNHVHOHFWLRQVXVLQJ instructions 3 to 6 above or alternatively momentarily press the key to exit the menu and return to the main operating screen.
11
Examples of using the menu, selecting options and making changes
Power / mains frequency (locator only)
4.
5.
1.
2.
6HOHFWWKHFRUUHFWIUHTXHQF\RU+]IRU\RXUFRXQWU\RUUHJLRQpVQDWLRQDOSRZHU
VXSSO\7RFKDQJHSRZHUIUHTXHQF\RQWKHORFDWRU
Press the key momentarily to enter the menu.
Press the or NH\VXQWLO32:(5LVGLVSOD\HG
3.
Press the
ORFDWRUNH\WRHQWHUWKH32:(5VXEPHQX
Use the or NH\VWRVHOHFWWKHFRUUHFWIUHTXHQF\
Press the key to accept your selection.
Language
4.
5.
6.
2.
3.
To select your preferred menu language:
1.
Press the key momentarily to enter the menu.
Press the or keys until LANG is displayed.
Press the locator key or transmitter key to enter the LANG submenu.
Press the or arrows to select your preferred language.
Press the key to accept your selection and return to the main menu.
Press the key momentarily to return to the main operation screen.
Depth Measurement Units (locator only)
4.
5.
2.
3.
7KH5'DOORZV\RXWRZRUNLQ0HWULFRU,PSHULDOXQLWV7RVHOHFW\RXUSUHIHUUHG units of measurement:
1.
Press the key momentarily to enter the menu.
6.
Press the or keys until UNIT is displayed.
Press the key to enter the UNIT submenu.
Press the or DUURZVWRVHOHFW0HWULFRU,PSHULDOXQLWV
Press the key to accept your selection and return to the main menu.
Press the key momentarily to return to the main operation screen.
Battery
1.
2.
7KH5'ORFDWRUDQGWUDQVPLWWHUVXSSRUW$ONDOLQH1L0+RU/LWKLXP,RQEDWWHULHV
It is important that you set the system to match the currently installed battery type to ensure optimal performance and correct battery level indication. To set your battery type:
3.
Press the key momentarily to enter the menu.
Press the or keys until BATT is displayed.
Press the locator key or transmitter key to enter the BATT submenu.
12
4.
5.
6.
Press the or keys to select the correct battery type.
Press the key to accept your selection and return to the main menu.
Press the key momentarily to return to the main operation screen.
Locating pipes and cables
Passive Frequencies
3DVVLYHIUHTXHQF\GHWHFWLRQWDNHVDGYDQWDJHRIVLJQDOVWKDWPD\DOUHDG\EHSUHVHQWRQ
EXULHGPHWDOOLFFRQGXFWRUV7KH5'VXSSRUWVWKUHHW\SHVRISDVVLYHIUHTXHQFLHV
3RZHU5DGLRDQG&36&DWKRGLF3URWHFWLRQ6LJQDO<RXPD\GHWHFWWKHVHIUHTXHQFLHV without the aid of the transmitter.
Active Frequencies
$FWLYHIUHTXHQFLHVDUHDSSOLHGGLUHFWO\WRWKHSLSHRUFDEOHXVLQJWKHWUDQVPLWWHUDQG are the preferred method of applying a signal to a conductor using the transmitter. The transmitter can apply a signal using two methods: induction and direct connection.
Induction
7KHWUDQVPLWWHULVSODFHGRQWKHJURXQGRYHURUQHDUWKHVXUYH\DUHD<RXVHOHFWWKH
DSSURSULDWHIUHTXHQF\7KHWUDQVPLWWHUZLOOWKHQLQGXFHWKHVLJQDOWRDQ\QHDUE\PHWDOOLF
FRQGXFWRUV,QLQGXFWLRQPRGHXVLQJKLJKHUIUHTXHQFLHVLVJHQHUDOO\UHFRPPHQGHGDV they are induced more easily onto conductors.
Direct connection
,QGLUHFWFRQQHFWLRQ\RXFRQQHFWWKHWUDQVPLWWHURXWSXWGLUHFWO\WRWKHSLSHRUWRWKH conductor of the cable you wish to survey. The transmitter will then apply an active
IUHTXHQF\VLJQDOWRWKHOLQHZKLFK\RXFDQORFDWHXVLQJWKHORFDWRU7KLVPHWKRG
SURYLGHVWKHEHVWVLJQDORQDQLQGLYLGXDOOLQHDQGHQDEOHVWKHXVHRIORZHUIUHTXHQFLHV which can be traced for longer distances.
&RQQHFWLQJWKHWUDQVPLWWHUWRDSLSHRUOLQHUHTXLUHVWKHXVHRIDGLUHFWFRQQHFWLRQOHDG connected to the accessory socket of the transmitter. The red lead is connected to the pipe or cable and the black lead connected to an earth stake to complete the electrical circuit.
WARNING! Direct connection to live wires is POTENTIALLY LETHAL.
#HQDBSØBNMMDBSHNMRØRGNTKCØADØ@SSDLOSDCØAXØETKKXØPT@KHÚDCØODQRNMMDKØNMKX×
WARNING! The transmitter is capable of outputting potentially lethal voltages. Take care when handling the terminals, connection leads and ground stake, notify other technicians working on the line of the hazard and guard exposed conductors to prevent accidental contact.
13
Signal clamps
:KHQLWLVQRWSRVVLEOHWRFRQQHFWWRDSLSHRUFDEOHXVLQJDGLUHFWFRQQHFWLRQOHDGD transmitter signal clamp can be connected to the accessory socket of the transmitter and the output signal can be applied. This is particularly useful with live cables as it removes the need to disable the power and break into the line.
To locate or indentify individual lines a locator signal clamp can be connected to the accessory socket of the locator and can be clamped around individual cables or pipes that are bunched together.
5DGLRGHWHFWLRQVXSSOLHVDUDQJHRIVLJQDOFODPSVWRVXLWPDQ\DSSOLFDWLRQV
Stethoscopes
$WWLPHVLWPD\QRWEHSRVVLEOHWRXVHDORFDWRUWRORFDWHRULGHQWLI\DSDUWLFXODUWDUJHW line due to inaccessibility. In these situations a stethoscope antenna should be used to locate or identify individual target lines.
5DGLRGHWHFWLRQVXSSOLHVDUDQJHRIVWHWKRVFRSHVWRVXLWPRVWDSSOLFDWLRQV7RXVHD
VWHWKRVFRSHFRQQHFWLWWRWKHORFDWRUVDFFHVVRU\VRFNHW7KHORFDWRUZLOODXWRPDWLFDOO\
GHWHFWWKHGHYLFHDQGÛOWHURXWORFDWLRQPRGHVWKDWDUHLUUHOHYDQW
Locating sondes
Sondes are battery powered transmitters that are useful for tracking non-metallic pipes
DQGFDQEHÛWWHGWRÜH[URGVDQGLQVHUWHGLQWRSLSHVDQGGXFWLQJHWF7KH5'3/
'/DQG7/PRGHOVFDQGHWHFWDUDQJHRIVRQGHIUHTXHQFLHVLQFOXGLQJWKRVHWUDQVPLWWHG
E\)OH[L6RQGHVDQGWKH3ÜH[LWUD[ w
crawler.
)RUDGHWDLOHGJXLGHRQORFDWLQJVRQGHVSOHDVHUHIHUWRWKH5'2SHUDWLRQ0DQXDO
&AULTÚNDING
7KH5'7/DQG3/PRGHOVKDYHWKHDELOLW\WRGHWHFWVKHDWKFDEOHIDXOWV accurately using an accessory A-Frame. The Tx-3 and Tx-10 transmitters provide a fault
ÛQGLQJVLJQDOWKDWFDQEHGHWHFWHGZLWKDQ$IUDPHZKLFKRFFXUVZKHQHYHUWKHUHLV damage to cable sheaths.
)RUDGHWDLOHGJXLGHWRIDXOWÛQGLQJSOHDVHUHIHUWRWKH5'RSHUDWLRQPDQXDO
Using accessories
5DGLRGHWHFWLRQKDYHGHVLJQHGDUDQJHRIDFFHVVRULHVWRXVHZLWKWKH5'ORFDWRUV and transmitters. These accessories can be used on a wide range of applications for
DSSO\LQJVLJQDOVWRWDUJHWOLQHVIDXOWÛQGLQJRQFDEOHVLGHQWLI\LQJLQGLYLGXDOWDUJHWOLQHV
DQGORFDWLQJSODVWLFSLSHVHWF$SSOLFDEOH5'DFFHVVRULHVDUHFRPSDWLEOHZLWKWKH
5'ORFDWRUDQGWUDQVPLWWHUV
)RUGHWDLOHGLQIRUPDWLRQRQDFFHVVRULHVSOHDVHVHHWKH5'RSHUDWLRQPDQXDO or go to www.radiodetection.com
.
14
Centros Manager
™
&HQWURV0DQDJHULVD5DGLRGHWHFWLRQ3&DSSOLFDWLRQZKLFKLVDYDLODEOHDVDIUHH
GRZQORDG)URPWLPHWRWLPH5DGLRGHWHFWLRQZLOOUHOHDVHQHZVRIWZDUHIRUWKH5'
ORFDWRUDQGWUDQVPLWWHUZKLFKPD\LPSURYHSHUIRUPDQFHVWDELOLW\DQGPD\LQFOXGHQHZ
IHDWXUHV7KHODWHVWVRIWZDUHLVFRQWDLQHGZLWKLQ&HQWURV0DQDJHUDQGWRGRZQORDGWKH latest software you must register for extended warranty (see page 5 for details). Once registered you will receive an email when new versions of software are available and you
PD\DOVRFDUU\RXWDQH&$/WRYDOLGDWHWKHFDOLEUDWLRQDQGIXQFWLRQDOO\WHVWWKH5' locator.
Installing Centros Manager
Note: Before download you are advised to view or download the Centros Manager operation Manual by going to www.radiodetection.com/centrosmanager .
Note: When you install Centros Manager onto a PC, the following message may be displayed: “You need to log in as Administrator” . If this message is displayed, the installation of the program will not complete. You will need to log on as an
Administrator or ask a user with Administration Rights to install the program on your behalf. Having successfully installed Centros Manager, the Administrator will need to carry out the instructions in Section 7.1 of the Centros Manager Operation Manual if they wish users without Administrator Rights to use Centros Manager.
1.
2.
Go to: www.radiodetection.com/centrosmanager .
Click on the link to download Centros Manager and a File Download Window will
DSSHDU<RXZLOOKDYHDFKRLFHRIHLWKHU5XQRU6DYH
Run: &HQWURV0DQDJHUZLOODXWRPDWLFDOO\LQVWDOO
Save: \RXZLOOEHJLYHQWKHRSWLRQWRVDYH&HQWURV0DQDJHUWRDGHVWLQDWLRQRI\RXU
FKRLFH2QFH\RXVHOHFWWKHGHVWLQDWLRQWKH&HQWURV0DQDJHUH[HFXWDEOHSURJUDP
ZLOOGRZQORDGWRWKDWGHVWLQDWLRQ2QFHFRPSOHWHG\RXZLOOKDYHWKHRSWLRQWR5XQ
RU2SHQ)ROGHU$WWKLVVWDJH&HQWURV0DQDJHUKDVQRWEHHQLQVWDOOHGVR\RXFDQ
HLWKHUVHOHFW5XQDQG&HQWURV0DQDJHUZLOODXWRPDWLFDOO\LQVWDOORU\RXFDQFKRRVH
WR2SHQ)ROGHU:KHQ\RXRSHQWKHIROGHUWKH&HQWURV0DQDJHUH[HFXWDEOHÛOHZLOO
EHDYDLODEOH7RLQVWDOOGRXEOHFOLFNRQWKLVÛOH
3.
:KHQ&HQWURV0DQDJHULVLQVWDOOHGUXQIURPWKH:LQGRZV6WDUWPHQXXQGHU
3URJUDPVRUDOWHUQDWLYHO\XVHWKH&HQWURV0DQDJHUVKRUWFXWRQ\RXUGHVNWRSLI
\RXKDYHRSWHGWRKDYHWKLVGXULQJLQVWDOODWLRQRI&HQWURV0DQDJHU
Note: Once Centros Manager is open, click on Help to open the Centros Manager
Operation Manual.
15
s s s
eCAL
™
(DFKWLPH\RXXVHDORFDWRU\RXZDQWWREHFRQÛGHQWWKDWWKHHTXLSPHQW\RXDUHXVLQJ
FRQWLQXHVWRSHUIRUPWRWKHVDPHVWDQGDUGDVLWGLGZKHQLWÛUVWOHIWWKHIDFWRU\H&$/ provides users with the following features which maybe accessed and carried out on
VLWHZLWKRXWWKHQHHGWRUHWXUQWKHORFDWRUWRDVHUYLFHFHQWUH
&KHFNWKHYDOLGDWLRQRIWKH5'ZLWKWKHRULJLQDOVWRUHGIDFWRU\FDOLEUDWLRQ results.
Carrying out a functional check.
5HWULHYLQJRULJLQDOIDFWRU\FDOLEUDWLRQFHUWLÛFDWHRUSUHYLRXVH&$/YDOLGDWLRQFHUWLÛFDWHV
3NØU@KHC@SDØXNTQØ1#ØXNTØLTRSØÚQRSØB@QQXØNTSØSGDØENKKNVHMF
1.
5HJLVWHU\RXU5'ORFDWRUDW
See page 5 for more details.
www.radiodetection.com/extendedwarranty .
2.
3.
Purchase an eCAL key at www.radiodetection.com/ecal or alternatively contact
\RXUORFDO5DGLRGHWHFWLRQUHSUHVHQWDWLYH
'RZQORDG&HQWURV0DQDJHUDW www.radiodetection.com/centrosmanager .
See page 15 for details.
2.
3.
4.
Using eCAL to validate the RD7000+
1.
&RQQHFWWKH5'YLDWKH86%FRQQHFWRULQVLGHWKHEDWWHU\FRPSDUWPHQWWR a suitable USB port on a PC or laptop.
6ZLWFKRQWKH5'QRVHJPHQWVZLOOEHOLWEXWWKHEDFNOLJKWZLOOEHRQ
2SHQ&HQWURV0DQDJHUDQGFOLFNRQ/RFDWRUH&$/9DOLGDWLRQ
5.
6.
&RS\WKHH&$/NH\UHFHLYHGLQ\RXUFRQÛUPDWLRQHPDLOZKHQSXUFKDVLQJWKH eCAL key) and click on Load Validation Key icon and paste the eCAL key.
&OLFNRQ5XQH&$/9DOLGDWLRQ$PHVVDJHER[ZLOODXWRPDWLFDOO\RSHQLQIRUPLQJ you of progress.
In less than 3 minutes the eCAL Validation Status will be displayed. To view or print
WKHFHUWLÛFDWHORFDWHWKHVHULDOQXPEHURIWKH5'ZLWKLQWKH8QLW0DQDJHU window and expand the contents. Expand Calibration History and double click on
WKHODWHVWGDWHWRGLVSOD\WKHFHUWLÛFDWHRIYDOLGDWLRQ
Using eCAL to retrieve the original factory
CALIBRATIONĀCERTIÚCATE
7KHRULJLQDOIDFWRU\FDOLEUDWLRQUHVXOWVIRUWKH5'ORFDWRUFDQEHUHWULHYHGIURP
WKHXQLW(DFKWLPHWKH5'LVFDOLEUDWHGHLWKHUDW5DGLRGHWHFWLRQRUDQDSSURYHG
5DGLRGHWHFWLRQVHUYLFHFHQWUHWKHFDOLEUDWLRQUHVXOWVDUHVWRUHGZLWKLQWKHORFDWRU7R
UHWULHYHWKHUHVXOWVDQGSULQWDFHUWLÛFDWHFDUU\RXWWKHIROORZLQJ
Note: You do not need to purchase an eCAL validation key to retrieve the original
GBDUPSZDBMJCSBUJPODFSUJÙDBUF
1.
2.
3.
4.
5.
6.
7.
5HJLVWHU\RXU5'ORFDWRUE\JRLQJWR www.radiodetection.com/extendedwarranty . See page 5 for more details.
'RZQORDG&HQWURV0DQDJHUE\JRLQJWR www.radiodetection.com/centrosmanager . See page 15 for details.
&RQQHFWWKH5'YLDWKH86%FRQQHFWRULQVLGHWKHEDWWHU\FRPSDUWPHQW to a suitable USB port on a PC or laptop.
6ZLWFKRQWKH5'QRVHJPHQWVZLOOEHOLWEXWWKHEDFNOLJKWZLOOEHRQ
2SHQ&HQWURV0DQDJHUDQGFOLFNRQ/RFDWRUH&$/9DOLGDWLRQ
Click on Get Original Calibration Data and a message box will automatically pop up displaying the progress.
,QOHVVWKDQPLQXWHVWKHRULJLQDOFDOLEUDWLRQFHUWLÛFDWHZLOOEHDYDLODEOHWRYLHZ
RUSULQWORFDWHWKHVHULDOQXPEHURIWKH5'ZLWKLQWKH8QLW0DQDJHUZLQGRZ and expand the contents. Expand Calibration History and click on each date.
:KHQ\RXFOLFNRQHDFKGDWHWKHW\SHRIFHUWLÛFDWHZKHWKHUDQH&$/YDOLGDWLRQRU
RULJLQDOIDFWRU\FDOLEUDWLRQWRJHWKHUZLWKGDWHDQGVHULDOQXPEHUZLOOEHGLVSOD\HG
%\FOLFNLQJRQWKLVZLQGRZWKHFHUWLÛFDWHZLOOEHGLVSOD\HGDQG\RXFDQFKRRVHWR
SULQWWKLVFHUWLÛFDWH
16 17

Public link updated
The public link to your chat has been updated.
Advertisement