Dorel happy pears Instruction Manual

Add to my manuals
20 Pages

advertisement

Dorel happy pears Instruction Manual | Manualzz

• vvv

happy pears

3-in-1 portacot instruction

manual

IMPORTANT

BEFORE ASSEMBLING THIS COT READ AND UNDERSTAND THE INSTRUCTIONS.

Do not use mattress other than the one supplied by the manufacturer.

Incorrect mattress can cause death.

Use only accessories as recommended by the manufacturers.

Ensure the top rails and base are fully locked.

Stop using this cot if any part of the cot is broken, torn or missing.

KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.

Illustrations and designs may vary.

follow us on motherschoice.com.au

the only choice

2

contents

assembling the portacot pg.

Warnings 3 - 4

Components list 5

Unfolding the portacot 6 - 8

Securing the mattress 9

Installing the bassinette 10 - 11

Removing the bassinette 11

Installing the changetable 12 - 13

using the portacot

Folding the portacot 14 - 15

Operating the brakes 16

caring for your portacot

Care and maintenance

Notes

Product registration

contacts

Customer service 20

17

18

19

• vvv

These instructions detail the safe use, assembly and maintenance of your product. Please read these instructions carefully and ensure that they are followed at all times.

WARNING

COT USE:

USE ONLY THE MATTRESS SUPPLIED BY THE MANUFACTURER,

INCORRECT MATTRESSES CAN CAUSE DEATH.

USE ONLY ACCESSORIES AS RECOMMENDED BY THE SUPPLIER.

ENSURE THE TOP RAILS AND BASE ARE FULLY LOCKED.

DO NOT USE THIS COT IF ANY PART OF THE COT IS BROKEN, TORN

OR MISSING.

BASSINET USE:

THIS BASSINET SHOULD BE REMOVED BEFORE THE CHILD CAN SIT

UP.

NEVER PLACE A CHILD IN THE COT WHEN THIS BASSINET IS IN

PLACE.

NEVER LEAVES CHILD UNATTENDED.

NEVER PLACE A CHILD IN THE COT WHEN THE CHANGETABLE IS IN

PLACE.

ALWAYS USE THE HARNESS WHEN USING THE CHANGETABLE.

FOR SAFE USE:

To reduce the risks of Sudden Infant Death Syndrome (SIDS), paediatricians recommend healthy infants to be placed on their backs to sleep – unless otherwise advised by your physician.

Never use an extra mattress as this may cause a child to become trapped in the gap between the extra mattress, and the side of the folding cot, and suffocate.

Before use, ensure that the folding cot has been assembled correctly in accordance with instructions and that all top rail locks are securely engaged.

Keep children away while assembling or disassembling the cot.

3

• vvv

FOR SAFE USE:

(cont’d)

Never allow young children to play unsupervised in the vicinity of the folding cot.

Do not leave anything in the folding cot (such as toys) that provide a foothold to enable the child to climb out.

Do not use the folding cot near naked heat sources, bar heaters, open fires or exposed flames.

Keep the folding cot clear of trailing cables and hanging cords.

Keep medication and small items that a child could choke on away from the cot.

Discontinue the use of the cot if the material cover of the padded rim has been bitten through or torn.

Do not leave the folding cot outdoors exposed to direct sunlight.

Do not place more than one child in the folding cot at the same time.

Do not try and move the folding cot while a child is in it.

This product is not intended for commercial use.

To avoid danger of suffocation, keep any plastic bags away from babies and children.

Suitable for 1 child up to 14kg in weight.

This folding cot has been approved for use with the mattress #QX-807, bassinet #QX-807-BA, and changetable #QX-807-CT.

4

• vvv

happy pears

3-in-1 portacot components list

A B

C

D

F

E

A Portacot mattress

B Portacot

C Bassinette support rods (x2)

(total components x4)

D Portacot bassinette

E Carry bag

F Changetable

5

• vvv

happy pears

3-in-1 portacot assembly

getting started:

• Remove the portacot from the carry bag.

(Figure 1a).

• Stand the portacot upright, release velcro tabs and set the mattress aside. (Figure 1b).

1a 1b

Step 1: unfold the portacot

• Move the four corners apart (Figure 1c), to the position (Figure 1d).

1c

1d

6

• vvv

happy pears

3-in-1 portacot assembly

1e

Step 1: unfold the portacot (cont’d)

• Grasp the centre of the two shorter top frame rails (Figure 1e), and lift upwards until they click into place (Figure 1f).

• Repeat this step for the two long top rails

(Figure 1g).

mother’s choice tip...

Ensure that centre mechanism remains raised until all four sides are locked into place.

1f

1g

7

• vvv

happy pears

3-in-1 portacot assembly

Step 1: unfold the portacot (cont’d)

• Check that the top rails are fully locked by pressing down on the centre of each rail

(Figure 1h).

• Push down on the raised centre mechanism

(Figure 1i), until the base is flat and the lock clicks shut.

mother’s choice tip...

It’s important to make sure the top rails are fully locked and secure before moving on. If rails have not locked, repeat Figures 1f and 1g (page 7).

1h

1i

8

• vvv

happy pears

3-in-1 portacot assembly

Step 2: secure the mattress

• Place mattress into the portacot with the padded side up (Figure 2a).

• Secure each end of the mattress to the cot by threading the velcro tabs on the mattress through the corresponding slits in the portacot base (Figure 2b), and securing on the under side.

2a under side

2b

9

• vvv

happy pears

3-in-1 portacot assembly

B

B

A

A

3a

Step 3: installing the bassinette

• Remove the mattress from the portacot and put it aside.

• Place the bassinette into the portacot.

• Engage all secondary bassinette clips onto the portacot rim (Figure 3a).

• Fix the bassinette to the portacot corners by stretching the bassinette corner fabric over the corners of the portacot.

3b

• Select the 2 support rods with reduced ends (A).

• Place the rods into the sewn pockets with the reduced ends towards the centre of the bassinette (Figure 3b).

• Place the remaining 2 rods (B) into the opposite pockets.

• Slide the ends of the rods together so that one is inserted inside the other

(Figure 3c).

• Place the mattress into the bassinette with its padded side on top. Press down firmly to ensure a snug fit.

3c

10

• vvv

happy pears

3-in-1 portacot assembly

Step 3: installing the bassinette (cont’d)

• Secure each end of the mattress to the cot by threading the velcro tabs on the mattress through the corresponding slits in the bassinette base (Figure 3d), and securing on the under side.

mother’s choice tip...

To easily access the bassinette base slits after the mattress has been inserted, unclip the corner of the bassinette, and reach your hand in underneath.

to remove the bassinette

3d

• Release the velcro tabs from the underside of the bassinette.

• Remove the mattress from the bassinette.

• Release the bassinette fabric from the corner mouldings of the portacot.

• Remove the secondary clips from around the top rim of the portacot and lift the bassinette from the portacot.

• Separate the rods and remove them from the sewn pockets.

• TO PREVENT FALLS, THE BASSINET MUST NOT BE USED ONCE

A CHILD CAN SIT UP.

NEVER PLACE A CHILD IN THE COT WHEN THE BASSINET IS IN

PLACE.

11

• vvv

happy pears

3-in-1 portacot assembly

step 4: installing the changetable

• Ensure each of the two support rods is within the pockets sewn into the portacot changetable. If they are not, slide them through (Figure 4a).

4a insert

• Position the changetable on the rails of the portacot to align it with the press studs located at one end of the portacot.

• Push the clips at each end of the two support rods firmly onto the portacot top rails, then attach press studs (Figure 4b).

4b push support rod onto top rail attach press studs

• Repeat steps for both support rods, on both ends of each support rod.

repeat for both sides

4c

12

• vvv

happy pears

3-in-1 portacot assembly

step 4: installing the changetable (cont’d)

A press studs

B

4d

• Pull the changetable side flap over the end of the portacot.

• The changetable side flap is attached to the portacot by three press studs on the underside of the flap, (Figure 4d).

safety strap

4e

• The adjustable safety strap is provided to restrain your child whilst changing

(Figure 4e).

• To tighten, pull the tail of the webbing

(A). To extend, tilt the adjuster (B).

• The buckle is released by squeezing the buckle tongues together.

13

• vvv

happy pears

3-in-1 portacot using

5a inside fabric view

folding the portacot

• Ensure both bassinette and changetable are removed.

• Release the velcro tabs from the underside of the portacot base and remove the mattress.

• Lift the centre of the mattress base frame until it is approximately

500mm above the floor (Figure 5a).

• Unlock each side rail by first lifting the centre of the rail, and whilst still lifting, squeezing the lock release button (Figure 5b).

• Lift the centre of the base frame as high as possible (Figure 5c).

5b

5c

14

• vvv

happy pears

3-in-1 portacot using mother’s choice tip...

Ensure carrying handle comes through opening in the bag (Figure 3g).

5f

5d

folding the portacot (cont’d)

• Push legs together (Figure 5d).

Wrap the mattress base around the portacot and feed the velcro straps through the three loops (Figure 5e).

• Insert portacot into carry bag and close zip.

5g

15

• vvv

happy pears

3-in-1 portacot using

to operate brakes

• Press Red wheel lock down to lock the portacot wheel.

• Lift Red wheel lock up to unlock the portacot wheel.

WARNING

Before placing your child in the portacot, apply the brakes.

16

• vvv

happy pears

3-in-1 portacot care and maintenance

• Always store portacot indoors in a clean and dry place.

• Check regularly for loose, damaged or broken parts, these should be tightened if loose and replaced if damaged or broken.

• Removable covers may be hand washed or spot cleaned. Wash separately.

• Do not bleach. Do not dry clean. Do not tumble dry. Dry in the shade thoroughly before storage or use and avoid direct heath and exposure to sunlight.

17

• vvv

notes:

18

• vvv

mother’s choice tip...

Visit us online to register your new

Mother’s Choice product.

follow us on motherschoice.com.au

www.motherschoice.com.au/product-registration

benefits of registration

• Your safety - allows us to contact you with important product notifications.

• Confirmation of ownership - provides a record in case of product loss or theft.

• Improved product development - helps us continue to design products that meet your needs.

to prevent loss or fading, please attach your receipt here:

19

• vvv

motherschoice.com.au

DOREL AUSTRALIA PTY LTD

655-685 Somerville Road

Sunshine West Victoria 3020

Email: [email protected]

Phone: 1300 809 526

Hours: 8:30 am - 5:00 pm Monday to Friday

IGC DOREL NEW ZEALAND LTD

14 Sir William Avenue

East Tamaki Auckland 2013

Email: [email protected]

Phone: 0800 628 000 (toll free)

Hours: 8:00 am - 5:00 pm Monday to Friday

• vvv

Specifications are subject to change without notice.

Copy or reproduction without permission is prohibited.

© 2013 Dorel Australia Pty Ltd. All Rights Reserved.

www.dorel.com.au

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement