PRINTED IN China
48033357
USER MANUAL
G
F
E
D
C
B
H
T
A
I
J
K
S
R
Q
P
L
O
T
U* *
* Certain models only
M
N **
V*
W*
** Certain models only, nozzles may vary according to model
1
5
9
2
10
7
11
4
8
12
13
17
14
18
15
19
16
INSTRUCTIONS FOR SAFE USE
This appliance should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the appliance.
Do not leave the appliance plugged in. Always switch off and remove the plug from the socket after use, or before cleaning the appliance or any maintenance task.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
If the power cord is damaged stop using the appliance immediately. To avoid a safety hazard, an authorised
Candy service engineer must replace the power cord.
Keep hands, feet, loose clothing and hair away from rotating brushes.
Use only attachments, consumables or spares recommended or supplied by Candy.
Static electricity: Some carpets can cause a small build up of static electricity. Any static discharge is not hazardous to health.
Do not use your appliance out of doors or on any wet surface or for wet pick up.
Do not pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.
1
GB
Do not spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours.
Do not run over the power cord when using your appliance or remove the plug by pulling on the power cord.
Do not continue to use your appliance if it appears faulty.
Candy service: To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised Candy service engineer.
Do not stand on or wrap the cord around arms or legs when using your appliance.
Do not use the appliance to clean animals or people.
Do not position the appliance above you when cleaning the stairs.
The Environment
The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.
CANDY Hoover GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy
GETTING TO KNOW YOUR CLEANER
A. Cord Reel Pedal
B. Exhaust Filter Cover
C. Exhaust Filter
D. Parking Slot
E. On/Off Pedal
F. Dust Container Assembly
G. Main Body
H. Hose
I. Suction Regulator
J. Hose Handle
K. Telescopic Tube
L. Telescopic Tube Adjuster
M. Floor Type Selector Pedal
N. Carpet And Floor Nozzle**
O. Dust Container
P. Vortex Finder
Q. Pre-motor filter Assembly
R. Dust Container Lid
S. Dust Container Release Button
T. 2 in 1 Accessory
U. Pet Hair Remover Mini Turbo Nozzle*
V. Allergen Remover Mini Turbo Nozzle*
W. Parquet Nozzle*
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release: simply press the button on the hose end and pull. [1]
2. Connect the hose handle to the upper end of the extension tube [2] , or accessories,if required.
3. Connect the lower end of the telescopic tube to the Carpet & Floor nozzle** [3] or accessories if required.
GB
USING YOUR CLEANER
1. Extract the power cord and plug it into the power supply. Do not pull the cord beyond the red marker.
[4]
2. Adjust the telescopic tube to the desired height by moving the telescopic release button up and raise or lower the handle to the most comfortable cleaning position.
[5]
3. Carpet & Floor Nozzle**. Press the floor type selector on the nozzle [6] to select the ideal cleaning mode for the floor type.
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for deeper cleaning.
4. Switch the cleaner on by pressing the on/off Pedal on the cleaner main body. [7]
5. Adjust the suction regulator on the handle to the desired level.
[8]
6. Switch off at the end of use by pressing the on/off Pedal. Unplug and press the cord reel pedal to wind the power cord back into the cleaner.
[9]
PARKING AND STORAGE SECTION
The tube and the nozzle can be parked on the back of the cleaner for storage or temporary storage while in use. [10]
ACCESSORIES
All accessories can be fitted to the end of the hose handle or the end of the tube.
2 in 1 Accessory– Combines several functions into one tool: [T]
Crevice Tool – For corners and hard to reach areas.
Dusting Brush – For bookshelves, frames, keyboards and other delicate areas.
Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hair removal. [U]
Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas. Particularly suitable for allergen removal. [V]
Parquet Nozzle * - For Parquet floors and other delicate floors. [W]
IMPORTANT: Do not use the Mini Turbo nozzles on rugs with long fringes, animal hides and carpet pile deeper than 15mm. Do not keep the nozzle station ary while the brush is rotating.
2 *Certain Models Only ** Certain models only, nozzles may vary according to model
CLEANER MAINTENANCE
Emptying the Dust Container
When the dust reaches the max level indicator in the container, empty the dust container.
IMPORTANT: To maintain optimum performance do not allow the dust to sit higher than the max level.
1. Turn the cleaner off switching the on/off pedal and unplug the power cable.
2. Press the dust container release button and remove the dust container assembly from the cleaner. [11]
3. Hold the dust container with one hand, and remove the dust container lid by rotating anti-clockwise.
[12]
4. Remove the pre-motor filter assembly from bin assembly. [13]
5. Remove the Vortex Finder from bin assembly.
[14]
6. Empty the dust from the bin.
[15]
7. Refit the vortex finder and pre-motor filter assembly to bin assembly.
8. Refit the dust container lid to bin assembly.
9. Close and refit to the cleaner main body.
Cleaning the washable filters
The cleaner is fitted with pre-motor filter and exhaust filters. To maintain optimum cleaning performance, regularly remove the filters and tap against the side of the dust container to release dust. The filters should be washed every 5 cassette empties or when the filters have excessive dust level.
IMPORTANT: All bagless cleaners require regular filters cleaning. Failure to clean your filters may result in air blockage, overheating and product failure. This may invalidate your guarantee.
IMPORTANT: Regularly check and maintain the filters .
IMPORTANT: Always ensure the filter pack is fully dry before use.
To access the pre-motor filter:
1. Remove the dust container from the cleaner.
[11]
2. Hold the dust container with one hand, and remove the dust container lid by rotating anti-clockwise.
[12]
3. Remove the pre-motor filter assembly from dust container assembly.
[13]
4. Gently tap and wash the pre-motor filter. Do not use hot water or detergents.
Remove excess water from the filter and leave to dry fully before re-using.
[18,19]
5. Reassemble the pre-motor filter assembly once fully dry and refit it into the cleaner.
To access the exhaust filter:
1. Unclip the exhaust filter cover from the rear of the cleaner main body.
[16]
GB
2. Remove the exhaust filter from the rear of the cleaner.
[17]
3. Gently tap and wash the filter using warm water. Do not use hot water or detergents.
Remove excess water from the filter and leave to dry fully before re-using.
[18,19]
Refit the exhaust filter to the rear of the cleaner once fully dry and refit the exhaust filter cover.
IMPORTANT: Do not use the product without the filter pack fitted.
Cleaning the dust container / separation unit
This cleaner uses a separation system unique to Candy. If necessary the separation unit can be disassembled from the dust container and cleaned.
1. Press the dust container release button and remove the dust container assembly from the cleaner. [11]
2. Hold the dust container with one hand and with the other remove the dust container lid by rotating anti-clockwise. [12]
3. Remove the pre-motor filter from dust container assembly. [13] Then remove the vortex finder from the dust container by pulling it. [14]
4. If necessary, use a cloth to remove excessive dust from the vortex finder surface.
Reassemble the internal components to the bin.
5. Reassemble the dust container lid to the dust container. Refit the dust container into the cleaner.
Removing a blockage
1. Check if the dust container is full. If so refer to ‘Emptying the dust container.
2. If the dust container is empty but suction is still low:
A. Do the filters need cleaning? If so refer to ‘Cleaning the washable filters’.
B. Check if there is any other blockage in the system - Use a rod or pole to remove
any blockage from the telescopic tube or hose.
C. Check for and clear any blockage in the Nozzle.
D. Check if the separation unit needs to be cleaned.
Refer to ‘Cleaning the separation unit.
3
USER CHECKLIST
Should you have a problem with the product, complete this simple user checklist before calling your local Candy service.
• Is there a working electricity supply to the cleaner? Please check with another electrical appliance.
• Is the dust container over-filled? Please refer to ‘Cleaner Maintenance’.
• Is the filter blocked? Please refer to ‘Cleaner Maintenance’.
• Is the hose or nozzle blocked? Please refer to removing a blockage from the system’.
• Has the cleaner overheated? If so, it will take approximately 30 minutes to automatically reset.
*Certain Models Only ** Certain models only, nozzles may vary according to model
IMPORTANT INFORMATION
Candy spares and Consumables
Always replace parts with genuine Candy spares. These are available from your local
Candy dealer or direct from Candy. When ordering parts always quote your model number.
Candy Service
Should you require service at any time, please contact your local Candy Service Office.
Quality
Candy’s factories have been independently assessed for quality. Our products are made using a quality system which meets the requirements of ISO 9001.
Your Guarantee
The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.
Subject to change without notice.
4
GB
