Ashdown TONE POCKET User Manual
Ashdown TONE POCKET: Your pocket-sized bass amp and recording studio. Practice, record, and perform with a 3-band EQ, line input, headphone output, balanced line output, and USB connectivity for direct recording to your computer. Powered by a rechargeable 9v battery, with included 10v DC and 12v in-car power supplies. Compact and durable, with a sleek anodized alloy exterior and CNC-machined front panel. Includes a soft case, USB cable, headphone adaptor, and self-adhesive rubber feet. Unleash your creativity with Ashdown TONE POCKET!
Advertisement
Advertisement
ASHDOWN TONE POCKET - HEADPHONE PRE AMP USER GUIDE
The Ashdown Tone Pocket in the answer to your practising needs and is the product you never knew you needed until now. With powerful features including a 3 band EQ, Line Input, Headphone output on the front.
There is a very well conected rear panel with a USB recording output for use with any DAW, the tone pocket doubles up as a sound card for your bass recording needs. You never know when you might want to lay down a new bass line...
The USB socket also doubles as a charger for desktop use.
The Tone Pocket is powered by a rechargeable 9v battery located internally (it can be changed if required by removing the rear panel). Supplied with the Tone Pocket is a 10v DC power supply centre pin negative as well as a 12v in car power supply for use with a 12v in car socket.
There is a balanced line output on the rear of the Tone Pocket to connect your Tone Pocket to an amplifier or PA system.
The Tone Pocket is very compact measuring in at H: 26mm W: 108mm D:95mm and weighing only
272grams. Perfect for keeping in your back pocket or sat on your desktop, you will never want to leave home without it.
The light weight black anodised alloy extrusion ensures durability and sleek looks with the CNC machined front panel with diamond polished detailing sets the knobs back from the pot to ensure they don’t get knocked and damaged.
What’s inside the box:
- 1 x Tone Pocket in soft case
- 1 x USB to USB cable
- 1 x Headphone 1/4” adaptor
- 1 x 10v power supply
- 1 x 12v in-car charger
- 1 x Pack of 4 self adhisive rubber feet
ASHDOWN TONE POCKET - HEADPHONE PRE AMP
Front Panel:
1.
2.
3.
4.
5.
USER GUIDE
Front Panel:
1-
INPUT - Instrument input socket for use with
Jack to Jack
2-
LINE IN - 3.5mm Jack socket for use conecting a line level audio device such as an MP3 player or alike...
6.
3-
3 BAND EQ - Roatery controls Bass, Mids &
Highs, what more could you need +/- 15dB on each band.
4control.
26mm
VOLUME - Roatery control master volume output level
5-
PHONES - 1/4” Headphone output socket for use with
7.
8.
9.
available directly via ashdownmusic.com USE:
‘TONEPOCKET18’ at checkout for a 20% discount on
OV-1 headphones.
ASHDOWN TONE POCKET - HEADPHONE PRE AMP
Rear Panel:
6-
1.
2.
7-
USB - Use the Tone Pocket as a sound card with its built in USB codec record and monitor your recordings on the go.
Also keep it charged via USB 5.1v - 2.1A
3.
USER GUIDE
8-
4.
5.
supply input for charging.
9-
DC-12v - Center pin positive 12v power supply input for use with in car charger or on a bus...
Rear Panel:
26mm
6.
7.
8.
9.
ASHDOWN TONE POCKET - HEADPHONE PRE AMP
Top View:
108mm
USER GUIDE
95mm

Public link updated
The public link to your chat has been updated.
Advertisement