Bluetooth Visor Clip with
Caller ID
Fully charge unit before use.
1.Turning on the unit
Press and hold the power button to turn on the Bluetooth Visor Clip, it will automatically pair to the external BT device, if previously paired. To shut off unit, press and hold power button.
2.Pairing Mode
To pair for the first time open Bluetooth settings on your phone. Search for other devices. Power on the speaker by pushing
Then hold down the
�
• on the speaker. Display will show'' pairing'; then flashes "-bt''. LED will blink red and blue. Select pairing name" AA Speaker ID" from your phone. The Bluetooth Visor Clip will then say''connected"when complete.
3.Viewing Screen Displays
After turning on the Bluetooth Visor Clip, the screen may show "PAIRING" until it enters pairing mode. Once you have activated the device, the screen will be show "-bt-".
When there is an incoming call, you will see the calling number on the viewing screen. When a call is in progress, "CALLING" shows up.
Ending the call "HANGUP" shows up. Turning off the speaker, "OFF" shows up.
4.Function of LED indicator
RED LED is on when the battery is charging.
RED LED is off when the battery is fully charged.
RED and BLUE LED blink alternately when the Bluetooth Visor Clip is in pairing mode.
RED LED blinks with sound alert when the battery has low power.
5. Button Functions
+ volume increase
volume decrease
Play I Pause /Answer Call
�
On I Off I Pairing I End Call
Specification
Bluetooth version
Transmission Power
Operating Range
Frequency Range
Microphone Specification
Talking Time
Standby Time
Charging Voltage
Charging Current
Charging Time
Accessories
Battery
Speaker
Color
Weight
Size
Bluetooth V3.0
+
EDR
Class 2
1 O Meter
2402 MHz� 2480GHz ISM Ban
-42db ( OdB=1V/Pa, 1 KHz)
5 hours
120 hours
5V
200MA
2-3 hours
Micro USB Cable, User's Manual, Visor Clip
5C Lithium Battery, 500 mAH
2W/80*1 <ll40mm
Black
83.6g
110.2*19.3*43.3mm
