American Builder HW2322 Manual
American Builder HW2322 is a versatile tool that combines the functionality of a wet and dry vacuum cleaner with an air compressor. It is a must-have for car owners, as it allows for easy cleaning and tire inflation.
The vacuum cleaner can be used to clean both wet and dry messes, making it ideal for cleaning up spills, pet hair, and dirt. It comes with a variety of attachments, including a brush nozzle, crevice tool, and rubber nozzle, so you can clean hard-to-reach areas and delicate surfaces.
The air compressor can be used to inflate tires, soccer balls, basketballs, and other inflatable objects. It features a built-in air pressure gauge so you can monitor the desired pressure level.
advertisement
HW2322
2-IN-1 WET & DRY VACUUM WITH AIR COMPRESSOR
Reservoir cover release button
SET INCLUDES:
(A) Auto Vacuum/Air Compressor
(B) Brush Nozzle
(C) Crevice tool
(D) Rubber Nozzle
(E) 3pcs Inflatable Nozzles
(F) Flexible Air Hose
D
B
F
C
E
E A
VACUUM OPERATING INSTRUCTIONS
1. Make sure the Vacuum/Compressor switch is set to the middle “OFF” setting.
2. Turn the car ignition on.
3. Insert the DC12V adapter into the cigarette lighter of the car.
4. Slide the Vacuum/Compressor switch forward to the “Vacuum” setting and begin vacuuming.
INCLUDED ATTACHMENTS
To use the included attachments: Brush Nozzle (B), Crevice Tool (C) and Rubber Nozzle (D).
Insert the desired tool into the front chamber of the reservoir cover and begin vacuuming.
CLEANING AND CARE
Clean the filter and reservoir regularly. Only a clean filter will ensure maximum suction power.
1. To clean out the filter, press the reservoir cover release button and pull the filter cover off.
2. Proceed to pull the filter out from the vacuum and discard debris.
3. Wash filter and reservoir under running water
4. Securely replace the filter and cover back on to the vacuum.
Vacuum/Compressor switch
HW2322
2-IN-1 WET & DRY VACUUM WITH AIR COMPRESSOR
COMPRESSOR OPERATING INSTRUCTIONS
1. Make sure the Vacuum/Compressor switch is set to the middle “OFF” setting.
2. Remove the plastic valve cover from the tire you wan to inflate.
3. Screw one end of the flexible air hose (F) on to the compressor, and screw the other end on to the valve of the tire you want to inflate.
4. Turn the car ignition on.
5. Insert the DC12V adapter into the cigarette lighter of the car.
6. Slide the Vacuum/Compressor switch back to the “Compressor” setting.
7. Check the built-in air pressure gauge on the compressor to monitor desired pressure level.
ATTACHMENTS FOR OTHER INFLATABLE OBJECTS
The air compressor can be used for inflating a soccer ball, basket balls and other objects with the included adapters.
WARNING
- Read all the instructions carefully prior to use and clean filter regularly.
- Do not submerge the main unit in water.
- Do not over-inflate.
- Use the proper adapter.
- Always refer to the tire's or the item to be inflated user manual for recommended air pressure.
- If the compressor has been running for more than 10 minutes. Please turn off and let it cool to avoid overheating.
- This is not a toy. Please keep away from children.
advertisement
Related manuals
advertisement
