Paxton ins-30016 1A power supply in plastic housing Instructions
PDF
Download
Document
Advertisement
Advertisement
Ins-30016 12V DC 1A power supply in plastic housing [email protected] Fitting Where the 1A power supply forms part of a larger module (as shown above) the unit should be wired to the AC supply in exactly the same manner. Illustrations in this instruction show the standalone 1A module. Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/ Monday - Friday from 07:00 - 19:00 (GMT) Saturday from 09:00 - 13:00 (GMT) 01273 811011 Technical help is available: Technical Support FUSE Unswitched fused spur 12v 0v Power supply in plastic housing The figure 8 power lead provided is pre-stripped at one end for connection to a fused spur. Wiring Specifications Environment Operating temperature Min Max - 20 °C + 55 °C Waterproof NO Cable length 2 metres Electrical Mains supply voltage Mains supply frequency Voltage Min Max 100V AC 240V AC +/- 5% 50 Hz 60 Hz +/- 3% 11.4V DC 13.6V DC Output voltage ripple 100 mV 1A Current Dimensions Width Height Depth Power supply only 108 mm 175 mm 40 mm Control unit (Black case) 170 mm 175 mm 40 mm Control unit (White case) 200 mm 200 mm 75 mm Paxton Access Ltd hereby declares that this product is in conformity with all the essential requirements of the Directive 2014/53/EU. http://paxton.info/3685 The full declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596 This product is not suitable for retail sale. All warranties are invalid if this product is not installed by a competent person. © Paxton Access Ltd 2014 14/02/2014 ">

Public link updated
The public link to your chat has been updated.
Advertisement