Paxton DS1037 Switch2 Data Sheet
Advertisement
Advertisement
TDS-1037-US
Switch2
System specifcations
Maximum total users/tokens
PIN Length
Number of codes
Code length
Handsfree compatible
Door open time
Silent operation
Data retention during a total power loss
Electrical
Operating Voltage
Current consumption
Relay switchable voltage
Relay switchable current
Alarm output current
Hardware
Reader ports per ACU
Readers/Keypads per ACU
Total ACU reader port output current
3rd party reader support
Features
Input for exit button
Input for door contact
Alarm/bell output
Can be used with fail OPEN release
Can be used with fail CLOSED release
Environment
Operating temperature
Moisture resistance
Vandal Resistance
Certifications
FCC Part 15
Yes
Yes
Yes
Yes
Yes
100 card packs (up to 5,000 tokens/users)
4
50
4-8
Yes - requires interface
1 sec - 60 secs
No
>10 years
10V - 14V DC
80mA
24V DC
4A
1A
1
2 - check current draw on individual readers
500mA
No
-20°C - +55°C
-4°F - +131°F
No - if used externally, it must be protected in a weatherproof housing
Low
Switch2 is a standalone, single door access control unit from
Paxton. A Switch2 control unit is fitted on the secure side of the door, with the reader fitted on the other side. The Switch2 control unit stores all of the access permissions for users’ within the unit; meaning that even if the reader is tampered with, the door remains secure.
Switch2 offers a secure solution for customers wishing to control access to internal and external doors, who do not need the reports on users movements provided by a PC based access control system.
Installing Switch2 is extremely simple and quick; colour to colour wiring and great functionality makes Switch2 ideal for installers who want to fit a standalone system with added security.
Customers need minimal training to manage their Switch2 system. All user tokens in the pack are immediately valid once the system has been enrolled. Lost or missing tokens can be simply barred at the door using our unique shadow card system and when using Paxton proximity readers, you can even set up simple zoning restrictions to control user access to certain areas around a site.
Switch2 is compatible with a wide range of stylish and functional Paxton readers and keypads, and reads both cards and keyfobs. It can also be fitted with a Hands free interface for convenient access with hands free tokens.
Dimensions
70 mm
2.8”
TDS-1037-US
23 mm
0.9”
Accessories and sales codes
Switch2 controller 405-321-US Switch2 controller - 12V 1A PSU, Plastic housing 242-166-US
© Paxton Ltd 1.0.3
Made in the UK

Public link updated
The public link to your chat has been updated.
Advertisement