INSTALLATION MANUAL
This manual is intended for users of the CDMWMA mounting bracket. It includes instructions for mounting CDMPMD1 3 or CDMWMD1 3 .
• This bracket is intended to be used with a specific model of camera.
Do not use it with other models of cameras except for those approved by the dealer or distributor.
• This installation should be performed by a qualified service personnel in conformance to all local codes.
• You may need to reinforce the ceiling. If the ceiling is not strong enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the ceiling pipe CDMPMD1 3 or wall mounting bracket CDMWMD1 3 as follows:
Wall Mounting Bracket
Screw Set M8X8, 2EA
Cable
Screw Set M8X8, 2EA
1 Insert cables from external devices, network and power adapter into bracket.
2 Assemble bracket into the ceiling pipe or wall mounting bracket and fix it by using the screws. The ceiling pipe and wall mounting bracket are sold separately.
Connect your camera CDI55360IW to the bracket as follows:
3 Screw the bottom cover onto bracket and then screw the camera dome cover onto the bottom cover.
Bracket
Bottom cover
Bottom
Cover
Camera
Dome
Cover
4 Turn on power.
Connect your specific model of camera to the bracket as follows:
Screw No.1 (2-point): CDI55360IW using screw A
3
1
2
5
4
4
1
3
<Screw type>
A B
2
5
Dimension
Unit: inch
Ø 1.57
1.34
Ø
3.7
Ø
5.66
