KitchenAid KRCB-6010 Fridge/freezer combination Program Chart

708_01003_CombiNF_CHART_UK
11-04-2007
9:49
Pagina 1
KRCB 6010
Product sheet
708_01003_CombiNF_CHART_UK
11-04-2007
9:49
Pagina 2
708_01003_CombiNF_CHART_UK
11-04-2007
9:49
Pagina 3
Product sheet
Carefully read the operating instructions before using the appliance.
A. Refrigerator compartment
1. Crisper drawers
2. Crisper shelf (fish, meat, diary products,
cheese)
3. Shelves / Shelf zone (cooked foods)
B. Freezer compartment
11. Upper basket (freezing area)
12. Frozen/deep frozen food storage
compartment
13. Ice cube tray (inside basket)
14. Freezer compartment inner door
Least cool zone
Intermediate temperature zone
Coldest zone
4.
5.
6.
7.
8.
9.
10.
Light unit and fan (depending on model)
Product control panel (depending on model)
Upper door tray (butter)
Door trays
Bottle rack
Bottle holder (if provided)
Rating plate (at the side of crisper)
Note: The number of shelves and shape of the accessories may vary according to the model. All the
shelves, doors, trays and racks are removable.
Caution: The refrigerator/freezer accessories must not be placed in a dishwasher.
3
708_01003_CombiNF_CHART_UK
11-04-2007
9:49
Pagina 4
Control panel
Freezer compartment
1. Appliance On/Stand-by button
2. Freezer temperature increase button
3. Freezer temperature decrease button
4. Freezer temperature display
10. Red temperature alarm light
14. Black-out red light alarm
11. Alarms deactivation button
16. Sensor function green light
12. “Extra” load function yellow light
13. “Extra” load function button
Refrigerator Compartment
5. Refrigerator compartment On/Off button
(“Vacation” function)
6. “Vacation Option” function green light
7. Refrigerator compartment temperature
display
8. Refrigerator temperature increase button
9. Refrigerator temperature decrease button
15. Filter replacement warning red light
CONTROL PANEL LOCK
The control panel can be locked after selecting the temperature of the refrigerator and freezer
compartment.
Press the keys (8) and (9) at the same time for at least 3 seconds and an acoustic alarm will signal activation of
the function. At this point the entire control panel will remain locked except for the “Acoustic Alarm” key
(11); if any key is pressed, an acoustic signal will sound and the message “CL” will appear on (4) and (7)
display while the key is pressed. To unlock the control panel, proceed as above, pressing the buttons (8) and
(9) at the same time, for at least 3 seconds.
FAN:
The refrigerator compartment is fitted with a fan, light and antibacterial filter module (if applicable). The fan
ensures a better distribution of the temperature inside the refrigerator compartment, with a better
preservation of the food.
The antibacterial filter ensures a high level of hygiene inside the refrigeration compartment through a
continuous purification of the air.
The filter has a life span of 6 months and after this period will need to be replaced. An acoustic alarm and the
flashing of the red warning light (15) will warn that the filter is no longer effective. To disable the acoustic
alarm press the Alarm Reset button (11). The red light will however stay on. Filter replacements can be
obtained from the Customer Service Centres. The procedure to replace the filter is explained on the
packing. After replacing the filter press the button (11) for at least 3 second. The system will be reset to the
initial condition and the red warning light (15) will go off. The warning to replace the filter will come on at six
month intervals.
Replacement of the filter is not covered by warranty.
Important:
The fan will only operate when the compressor is on. Do not obstruct the “Suction Zone”.
Note: Ambient temperature, frequency of door opening and position of the appliance can affect the
temperature inside the refrigerator and freezer compartments. These factors should therefore be taken into
account when adjusting temperatures.
4
708_01003_CombiNF_CHART_UK
11-04-2007
9:49
Pagina 5
Replacing the lamp
Always disconnect the refrigerator from the power
supply before replacing any light bulbs.
쩸
1. Loosen the screw and remove the light diffuser.
2. When replacing the light bulb, note that this
appliance is fitted with a special bayonet
connector (replacement available from the
Customer Care Centre); to remove the light
bulb pull it carefully in the direction of the
arrow as shown. DO NOT UNSCREW.
Replace the light bulb with one with equal
power or a power not higher than the
maximum limit indicated by the side of light
bulb holder.
3. Replace the diffuser and wait 5 minutes, before
reconnecting the appliance.
쩹
5
708_01003_CombiNF_CHART_UK
11-04-2007
9:49
Pagina 6
708_01003_CombiNF_CHART_UK
11-04-2007
9:49
Pagina 7
708_01003_CombiNF_CHART_UK
Printed in Italy
04/07
5019 708 01003
11-04-2007
9:49
Pagina 8
n
GB

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project