Whirlpool ARC7637 IX Fridge/freezer combination Program Chart

Add to My manuals
2 Pages

advertisement

Whirlpool ARC7637 IX Fridge/freezer combination Program Chart | Manualzz

PRODUCT SHEET

Your new appliance is a combined ventilated, No-Frost fridgefreezer exclusively for domestic use.

Whirlpool Total-no-frost fridge freezers circulate chilled air around the storage areas, reducing humidity to prevent the formation of ice, thereby completely eliminating the need for defrosting. Frozen items don’t stick to the walls, labeling stays legible and storage space remains neat and clear. No-Frost’s temperature control helps keep food fresher for longer.

GB

HOW TO OPERATE THE REFRIGERATOR

COMPARTMENT

Starting up the appliance

• Insert the plug into the mains socket.

• The appliance will switch on automatically unless knob (2) is on position OFF .

• The inside light switches on when both doors are opened.

After plugging the subsequent controls are activated:

• The lamps on the control panels light up for 2 seconds.

It takes the refrigerator about 2 to 3 hours to reach the normal operation temperature after turning on.

NOTE: Food products put inside the appliance before it achieved its set operating temperature may spoil.

Vacation

This function turns the appliance to a warmer state if you are going away for some time. To select the function, turn the vacation symbol on both knobs. To turn the refrigerator back to setting point repeat this procedure.

Important: after activating this function, remove all perishable foodstuffs from the refrigerator compartment and leave the door closed, since the refrigerator maintains a suitable temperature to prevent the formation of unpleasant odours.

A. Refrigerator Compartment

1.

Shelves / Shelf area

1a.

Plastic “Dual” shelf (depending on the model)

2.

Lighting

3.

Cooler compartment (depending on the model)

4.

Crisper drawers

5.

Door trays

6.

Separator (depending on the model)

7.

Bottle rack

8.

Rating plate

9.

Antibacterial filter (depending on the model)

10.

Air control (depending on the model)

B. Freezer Compartment

11.

Upper basket (freezing zone)

12.

Ice tray

13.

Shelves (depending on the model)

14.

Storage basket for frozen food items

15.

Freezer compartment door

16.

The freezer door trays for pizza or other frozen products with short storage time (depending on model)

C. Control panel

D. Internal controls

Notes:

• The number and type of shelves and configuration of accessories may vary, depending on the model. All shelves and door racks are removable.

• The appliance accessories are not suitable for washing in a dishwasher.

• The internal temperatures of the appliance depend on the ambient temperature, frequency of opening the doors, as well as location of the appliance. Take these factors into consideration when setting the thermostat knobs.

The anti-bacterial filter helps trap and kill airborne microorganisms caught within it. Remove it from the box found in the crisper drawer

(item 4) and insert into the grille (item 9).

For any optimum performance of the antibacterial filter, replace the filter every 6 months.

1.

Remove the filter and dispose as a whole (grate box + insert).

2.

Replace the filter and the grille with the new ones.

3.

The replacement procedure is attached to the filter.

Our After-sales Service can supply this type of filter.

To adjust the internal temperature (if necessary):

Turn the thermostat control knob

(2):

- Towards position 1 if the temperature inside the compartment is too cold.

- Towards position 7 for colder temperatures.

- To position OFF to switch the appliance off.

Recommended thermostat position: 3-4.

USING THE COOLER COMPARTMENT

(depending on the model)

The appliance is equipped with a cooler compartment.

To adjust temperature (if necessary), rotate the air regulator ( 4 ):

• Towards position (+) for cooler temperatures.

• Towards position (-) for less cool temperatures.

It is possible to remove the basket of the Cooler compartment.

USING THE FREEZER COMPARTMENT

• The freezer compartment starts operation as soon as the appliance is plugged into the power outlet socket.

Attention:

• There is no need to adjust the thermostat knob as the temperature is factory set to ensure the correct storage temperature for fresh foods at ambient temperatures between +20°C and +25°C.

• After switching on, the freezer compartment takes approximately

3 hours to reach a suitable temperature for frozen food storage.

To adjust the internal temperature

(if necessary):

Turn the thermostat control knob (1):

- Towards position 1 for less cold internal temperatures.

- Towards position 3 for colder temperatures.

- To position to use the fast freeze function.

Recommended thermostat setting: 2-3.

How to freeze fresh food

1.

24 hours before freezing fresh food, turn the knob (1) to position

; When turning from 3 to pos.

, the knob is slightly stiff and the yellow indicator (3) near the symbol lights up.

2.

Place food in the drawer, leaving enough space for air to circulate around packs.

3.

For more efficient freezing, turn the knob (2) to position 7 .

4.

Leave the fast freeze function activated for the next 24 hours

5.

When freezing is complete, turn both knobs (1) , (2) back to their recommended positions.

CONTROL PANEL DESCRIPTION

Other abnormal appliance operations

In case of abnormal appliance operation, a red alarm light will flash and a beep will sound.

After pressing and holding the alarm deactivation “RESET” button, the beep will stop and the indicator lamps (Party Mode, Fast Cooling,

Antibacterial Filter) will light up, allowing the user to determine the alarm code (in accordance with the following table listing possible alarm codes).

When several alarms occur simultaneously, the alarm with the highest priority is displayed (the highest priority is alarm code 01 ).

When the “RESET” button is released, the red indicator lamp will flash until the fault is eliminated.

If the sensor failure alarm is displayed (alarm code 01 ), the Party

Mode function is available until the fault is rectified. If the potentiometer failure alarm is displayed (alarm code 02 ), the Party

Mode and Fast Cooling functions are available.

Alarm type

Air sensor failure

Potentiometer failure

Open door alarm

Alarm codes

01

02

03

Indicator Lamp on

Party

Mode

Fast cooling

AntiBacterial filter

NO

NO

YES

NO

YES

NO

YES

NO

NO

After determining the alarm code (from 01 to 03), the user:

• Can eliminate the reason of the code 03 alarm unaided by closing the door.

• The other alarms (codes 01, 02) require contacting the service and providing the alarm code.

On/Off buttons

1.

Alarm resetting button.

2.

Alarm indicator lamp.

3.

Function selection button.

4.

Party Mode function indicator lamp.

5.

Fast Cooling function indicator lamp.

6.

Anti-bacterial filter replacement indicator lamp.

7.

Anti-bacterial filter alarm resetting button.

FUNCTION DESCRIPTION

Functions and settings

Alarm resetting (deactivation)

Party Mode: Activate this function before cooling products in the freezer compartment. To activate this function, press button Party Mode/Fast Cooling - 1 green LED lights up on the panel. After 30 minutes, the

LED will flash and a beep is heard. To reset the alarm press button Party Mode/Fast Cooling - the green LED goes off.

Fast cooling: Activate this function before cooling fresh products in the refrigerator compartment. To activate this function, press and hold for 3 seconds the Party Mode/

Fast Cooling button - green LED 2 lights up on the panel.

This function turns off automatically after 6 hours. To deactivate this function earlier, press and hold for 3 seconds the Party Mode/Fast Cooling button - green

LED 2 goes off.

“Anti-Bacterial filter” The antibacterial filter assures maintaining a higher level of hygiene in the refrigerator by continuously purifying the circulating air of bacteria. When it is necessary to replace the filter, a yellow LED (6) lights up. After replacing the filter, press and hold for 3 seconds the Reset filter button (7) to deactivate the alarm.

REPLACING THE LIGHT BULB

Always disconnect the refrigerator from the power supply before replacing any light bulb. If the inside light is not working, it is necessary to:

1.

Remove the light cover: put the fingers into the side ventilation holes (1), stretch the cover gently and move it upwards.

2.

Remove the bulb pulling it out of the holder (do not rotate).

3.

Check the bulb and replace (if necessary) by pushing its terminals into the holder sockets until it stops.

4.

Replace the light cover or holder.

The appliance is equipped with a special push-in light bulb.

This bulb is available only from our After-Sales Service.

The bulb should not exceed 15W .

Do not leave uncovered the bulb.

Care and Maintenance

When cleaning, especially with the light cover removed, take special safety precautions and do not touch the light bulb.

5019 637 01041

advertisement

Related manuals

Frequently Answers and Questions

How does the vacation mode on this refrigerator work?
Vacation mode on the Whirlpool ARC7636/1 refrigerator adjusts the appliance to a warmer state, making it suitable for periods when you are away. When enabled, it maintains a temperature that prevents unpleasant odors without freezing food.
What is the purpose of the antibacterial filter in this refrigerator?
The antibacterial filter in the Whirlpool ARC7636/1 refrigerator helps trap and remove airborne microorganisms, promoting a higher level of hygiene within the appliance.
How can I know when the antibacterial filter needs to be replaced?
The Whirlpool ARC7636/1 refrigerator features an indicator lamp that lights up in yellow when it's time to replace the antibacterial filter.
What is the optimal thermostat position for the refrigerator compartment?
For optimal performance, it is recommended to set the thermostat control knob in the refrigerator compartment between positions 3 and 4.
How do I turn off the fast freeze function on the freezer compartment?
To turn off the fast freeze function on the Whirlpool ARC7636/1 refrigerator's freezer compartment, simply turn the thermostat control knob back to its recommended position.

advertisement