Whirlpool WTV4598 NFC IX AQUA Fridge/freezer combination Program Chart

Add to my manuals
5 Pages

advertisement

Whirlpool WTV4598 NFC IX AQUA Fridge/freezer combination Program Chart | Manualzz

PRODUCT SHEET

GB

A. Freezer Compartment

1.

Ice tray

2.

Plastic shelves

3.

Area for freezing ( with/without flap)

4.

Area for storing frozen foods

5.

The freezer door tray for pizza or other frozen products with a short storage time (2** storage compartment)

6.

Door seals

B. Refrigerator Compartment

7.

Lighting

8.

Filter in fan*

8a.

button of fan

8b.

cover of fan

9.

Shelves / Shelf area*

10.

Multi-flow cold air system*

11.

Bottle rack*

12.

Cooler compartment (best for meat and fish)*

13.

Rating plate with commercial name

14.

Fruits and vegetables crisper

14a.

Crisper divider*

15.

Reversibility kit

16.

Water tank

17.

Separator*

18.

Door trays*

C. Control panel

Anti-bacterial protection (depending on the model):

- Antibacterial filter in the fan (8)

- Antibacterial additives in the Crisper (14)

- Door seals are made of material able to inhibit bacterial growth (6) .

Notes:

* Depending on the model the number and type of accessories may vary.

- In case it'll have a freezer flap, please remember that to maximize the storage volume it's suggested to remove flap by bending it.

- All shelves and door trays are removable.

- The internal temperatures of the appliance depend on the ambient temperature, frequency of opening the doors, as well as location of the appliance. Temperature setting must consider these factors.

- Unless otherwise specified the appliance accessories are not suitable for washing dishwasher.

D GB F NL E P I GR S

HOW TO START THE APPLIANCE FIRST

TIME

After plugging the appliance to the mains, it starts the operation automatically. After starting the appliance, wait at least 4-6 hours before placing food into the appliance.

When the appliance is connected to the power supply, the display lights up and all the icons appear on the display for few seconds.

The default (factory) values of the freezer compartment and refrigerator compartment settings light-up.

FAN WITH A BUTTON

The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food.

By default, the fan is ACTIVE.

It is advisable to keep the fan active, so that the "6th

Sense Fresh Control" function can work properly and also when the ambient air temperature is above 27 ÷ 28°C or if you perceive drops of water on the glass shelves or in the severe humidity conditions.

Note

Do not obstruct the air intake area with food items.

To guarantee the right performance at lower ambient temperature (colder than 18°C) and to minimize Energy

Consumption, turn off the fan.

To turn off the fan press the button ( 8a ).

If the appliance has the fan it can be equipped with the antibacterial filter .

Remove it from the box found in the crisper drawer (item

14 ) and insert into the cover of fan (item 8b ).

The replacement procedure is attached with the filter.

CONTROL PANEL

1.

Fridge temperature LEDs

2.

On/Stand-by icon/button

3. "6th Sense Fresh Control" icon

4.

Eco Night icon/button

5.

Freezer temperature LEDs

6.

Fridge temperature / Fast Cool (press 3 sec.) button

7.

Black Out icon

8.

Reset button / Alarm icon

9.

Key Lock button

10.

Freezer temperature / Fast Freeze (press 3 sec.) button

FUNCTIONS

On/Stand-by

This function turns On/Stand-by both the refrigerator and freezer compartments. To put the product in

N DK FIN PL CZ SK H RUS BG RO UKR CA

Stand-by, press & hold the On/Stand-by button for

3 seconds. All the icons turn off except On/Standby icon back light to indicate that the appliance is in

Stand-by. When the appliance is in Stand-by, the light inside the refrigerator compartment does not work.

Remember that this operation does not disconnect the appliance from the power supply. To switch the appliance on again, simply press the On/Stand-by button.

Fridge Temperature

To adjust the Fridge Temperature, press the Fridge

°C button. The Fridge Temperature can be adjusted between +2°C and +8°C, as shown by the Fridge

Temperature LEDs.

Freezer Temperature

To adjust the Freezer Temperature inside, press the

Freezer °C button. The Freezer Temperature can be adjusted between -16°C and -24°C, as shown by the

Freezer Temperature LEDs.

Fast Cool

Using Fast Cool function it is possible to increase the cooling in the refrigerator compartment. The use of this function is recommended when placing a very high quantity of food in the refrigerator compartment. Press & hold for 3 sec. the

Fridge °C button to activate/deactivate

Fast Cool function. When activated, the

Fast Cool indication will be displayed by the Fridge Temperature LEDs as shown in the beside sequence. The function is automatically disabled after 6 hours, or can be manually disabled by pressing

Fridge °C button.

Fast Freeze

The use of this function is recommended when placing a very high quantity of food to be frozen in the freezer compartment. 24 hours before freezing fresh food, press & hold for 3 sec. the

Freezer button to activate the Fast

Freeze function. When activated, the Fast

Freeze indication will be displayed by the

Freezer Temperature LEDs as shown in the beside sequence. After 24 hours place the food to be frozen on the upper shelf in freezer compartment (area for freezing). The function is automatically disabled after 48 hours, or can be manually disabled by pressing Freezer

°C button

Eco Night:

Eco Night function allows to concentrate the energy consumption of the product during off-peak time

(usually coinciding with night time), when energy is available in large quantity and it costs less than during the day (only in specific countries using multiple-rate

PRODUCT SHEET

GB system based on off-peak times - check your rate plan with your utility company). To activate the function, press the Eco Night button at the starting moment of the off-peak rate (depending on your specific rate plan). For example, if the off-peak rate starts at 20:00, you have to press the button at that time.

When the Eco Night icon is ON, the function is active. After you activate the function, the product automatically starts to adapt the energy consumption to the time, i.e. consuming less energy during the day then during the night.

IMPORTANT : In order to work in a correct way, the function must be active both during the night and the day.

The feature remains active until you deactivate it (or if a blackout occurs, or if the product is switched off).

To deactivate the function, press the Eco Night button. When the Eco Night icon is OFF the function is not active.

Note: appliance energy consumption is declared with

Eco Night function disabled.

"6th Sense Fresh Control"

This function allows optimum storage conditions

(regarding temperature and humidity) to be quickly reached inside the appliance.

The fan must also be switched on for it to work properly. The "6th Sense Fresh Control" is activated by default.

To manually deactivate the function, press the

Freezer °C and Eco Night buttons for 3 sec.: you will hear a long acoustical signal as confirmation that the feature has been deactivated.

The function can be reactivated by repeating the same procedure: you will hear double long acoustical signals as confirmation that the feature has been activated. In the event of an interruption in electricity or exit from

Stand-by to normal mode, the "6th Sense Fresh

Control" status resets to default i.e. active.

Smart Display

This energy saving feature allows to reduce power consumption by automatically turning off the display when not in use. To activate the Smart Display, press

Fridge °C and Freezer °C buttons at the same time for 3 seconds until the acoustic signal sounds.

After the Smart Display activation, the display goes off, except the "6th Sense Fresh Control" icon (and the alarms, if any).

To adjust temperature or use other functions, it is necessary to activate the display by pressing any button. After about 15 seconds without any action, the display will go off again, with the "6th Sense Fresh

Control" icon remaining visible.

To deactivate the function, press Fridge °C and

Freezer °C buttons at the same time for 3 seconds until the acoustic signal sounds.

D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO UKR CA

PRODUCT SHEET

The display will come back to the normal visualization. Smart Display function is automatically disabled after Black-out. It is important to remember that this function does not disconnect the appliance from the power supply.

Key Lock

This function prevents anyone from inadvertently

GB changing settings or switching off the appliance. To lock the keys, press Reset button for 3 seconds until the display shows the Key Lock icon : an acoustic signal confirms the function has been selected. To unlock the keys, follow the same procedure until the Key Lock icon switches off.

MALFUNCTION AND ALARM INDICATIONS:

Operation Alarms

In the event of operation alarms, they will also be displayed in the Fridge Temperature LEDs, (e.g. Failure1, Failure 2, etc...) call After-sales Service and specify the alarm code.

The acoustic alarm sounds, the Alarm icon lights up and the 3 central LEDs in the Fridge Temperature LEDs blinks according to failure code described below:

Failure code

Error 2

Error 3

Error 6

Visualization

RC & FC Set points blink on/off at 0,5 sec. Blinks ON

2 times then remain off for 5 seconds. Pattern repeats.

RC & FC Set points blink on/off at 0,5 sec. Blinks ON

3 times then remain off for 5 seconds. Pattern repeats.

RC & FC Set points blink on/off at 0,5 sec. Blinks ON

6 times then remain off for 5 seconds. Pattern repeats.

x2 x3 x6

Legend: Led off Led flashing

DOOR OPEN ALARM

The Alarm icon lights up blinking and the acoustic alarm sounds. The alarm is activated when the refrigerator's door is left open for more than 2 minutes.

Close the door to disengage the alarm, or press once

Reset button to mute the acoustic alarm for 2 minutes. If the door is not closed, the acoustic alarm will sound again after two minutes. To disengage the door alarms close the door.

OVER TEMPERATURE ALARM

The acoustic alarm sounds and all the 5 Freezer

Temperature LEDs blinks. The alarm is activated when:

• The appliance is connected to the power supply for the first time or after prolonged disuse

• The freezer compartment temperature is too high

• The quantity of foods loaded into the freezer exceeds that indicated on the data plate

• The freezer door has been left open for a long time

To mute the alarm buzzer press Reset button just once.

The Alarm Icon is automatically turned-off as soon as the freezer compartment reaches a temperature below -

10°C and the Freezer Temperature LEDs stop blinking and shows the chosen setting.

BLACK OUT ALARM

In the event of an interruption in electricity, your product is designed to automatically monitor the temperature in the freezer when electricity is resupplied. If the temperature in the freezer rises above freezing level, the

Black Out icon lit, & the Alarm Icon blinks and the acoustical alarm sounds when electricity is re-supplied. To reset the alarm press the Reset button just once. In case of Black Out Alarm, the following actions are recommended:

• If the food in the freezer is unfrozen but still cold, all the food in the freezer should be moved to the fridge compartment and eaten within the next 24 hours.

• If the food in the freezer is frozen, this indicates the food was thawed and then refrozen when electricity was re-supplied which degrades taste, quality and nutritional value and also could be unsafe. It is recommended to not consume the food but to dispose of the entire content of the freezer.

The Black Out Alarm is designed to provide guidance on food quality in the freezer in the event of electricity black out. This system does not guarantee food quality or safety and consumers are advised to use their own judgment in evaluating food quality in freezer and refrigerator compartments.

HOW CAN INCREASE THE FREEZER

COMPARTMENT CAPACITY

In certain models you can increase the freezer compartment capacity by:

D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO UKR CA

PRODUCT SHEET

- Removing the flap (if present).

- Removing the turntable only.

Please refer to the figures beside to see how to proceed.

GB

DEFROSTING THE REFRIGERATOR

COMPARTMENT

Refrigerator compartment defrosting is completely automatic.

Droplets of water on the rear wall inside the refrigerator compartment indicate that the automatic defrost phase is in progress. The defrost water is automatically run into a drain hole and collected in a container, where it evaporates.

How to make ice cubes

Depending on the model:

With a turntable and ice-cube trays

• Remove the turntable, fill the trays with water to approx. 3/4 and place back in the appliance.

• The ice-cubes will be automatically ejected into the container after turning the ice-cube tray knobs

DEFROSTING THE FREEZER

COMPARTMENT

No Frost freezers provide chilled air circulation around the storage areas and prevent the formation of ice, thereby completely eliminating the need for defrosting.

Frozen items don't stick to the walls, labeling stays legible and storage space remains neat and clear.

With an ice-cube tray

• Fill the ice-cube tray with water to approx. 3/4 and insert it into the freezer compartment.

• Do not use any sharp or cutting items to remove the tray.

CLEANING

Regularly clean the appliance using a cloth and a solution of warm water, with some soft detergent suitable for cleaning the inside of the refrigerator compartment.

Do not use abrasive detergents or tools.

To ensure continuous and correct flow of defrost water, regularly clean the inside of the draining hole on the back of the refrigerator near the fruit and vegetable drawer, using the tool provided.

LED's LIGHTING

If the inside LED light is not working, it must be replace by service.

Important:

The refrigerator compartment light switches on when the refrigerator door is opened. After 10 minutes of door opening the light switches off.

Before carrying out any cleaning or maintenance operation, unplug the appliance or disconnect it from the power supply.

UTILISATION AND MAINTENANCE OF THE WATER DISPENSER AND FILTER (if present)

Water dispenser

First use

The first time you use the water dispenser or after a long period left not used wash the tank and the filter with water.

The water dispenser provides fresh, filtered water, without the need of opening the refrigerator door. This will reduce the number of times the door is opened, thus also reducing energy consumption of the product.

Fitting and replacing the active carbon filter

The water filter should be removed from the foil bag (found in the crisper drawer (item 14). Follow the instructions provided with the filter.

Important: If the filter is left dry for an extended period of time, its performance may be reduced. Immerse the filter in water for a few seconds to reinstate optimum performance.

D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO UKR CA

To fill the tank, rotate the cap in the direction of the arrow

Tank

Fig. 1

PRODUCT SHEET

Water tank (fig. 1)

The water tank is made of antibacterial material. This prevents and reduces the proliferation of bacteria.

An internal container, with an active carbon filtered ensures water filtration.

To fill the tank: rotate the water inlet towards you and fill with water, using a jug or other suitable container. Once the tank is full, close the water inlet by moving it back to its original position.

Always use drinking water only: any other liquid may impair product performance.

GB

Stop

Water drip tray

Activation device

Fig. 2

Fig. 3

Obtaining filtered water (fig. 2)

After filling the tank, the water may not be immediately available. This is because the filtering process may require a few minutes (depending on the amount of water in the tank).

To dispense water: with the refrigerator door closed, press the water dispenser tab with the glass.

If for safety reason water delivery must be prevented, simply press the stop at the back of the tab.

To release water delivery move the stop back to its original position.It is recommended to drink the supplied water from the dispenser in 6 hours.

Cleaning the water tank (fig. 3-4-5-6-7-8)

Periodically clean the water tank with running water. Twice a year it is recommended to keep healthy the unit using specific products based on diluted chlorine that not modify the material properties and rinse with current water.

To clean the tank, proceed as follows:

- (fig. 3) release and remove the water tank by lifting it and pulling towards you. Place the tank on a flat surface, remove and wash the top cover.

Note: the tank must be refitted in its position as soon as possible, to prevent the refrigerator from overheating.

- (fig. 4a - 4b) remove the internal container and the filter, and wash them separately.

When washing the filter, only use clean water (no detergent or sharp tools). To clean the disk filter, first remove it from the container.

Fig. 4

- (fig. 5) for a more thorough cleaning, remove the valve cap (the fitting connecting the tank to the refrigerator) by rotating it anticlockwise. Clean the cap. Important: do not pull on the valve body (fig. 6).

Fig. 5 Fig. 6

- (fig. 7) replace the valve cap by rotating clockwise.

Fig. 7

Fig. 8

- (fig. 8) fit the tank back in place by placing it between the lateral guides of the door and pushing it in position, ensuring that the valve is back in its original seat. Check that the there are no gaps between the rubber seal of the tank and the door.

Suggested exchange of filter for a standard consumption usage of:

3,0 l/day 4 months

4,5 l/day 3 months

6,0 l/day 2 months

Filter replacement is not covered by product warranty. To order more water filter cartridges, please contact your after-sales service.

D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO UKR CA

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Stainless steel Freestanding 450 L
  • 341 L Fridge interior light
  • 109 L Top-placed 4* 12 kg/24h
  • 386 kWh 42 dB

Related manuals

Download PDF

advertisement