PRODUCT SHEET
GB
HYDROSENSE SHELVES
(depending on the model)
The special contour of the HydroSense shelves creates a barrier that contain spills and simplifies cleanup, preventing liquids from leaking onto shelves below.
A. Freezer Compartment
1.
Ice tray
2.
Plastic shelves
3.
Area for freezing ( with/without flap)
4.
Area for storing frozen foods
5.
The freezer door tray for pizza or other frozen products with a short storage time (2** storage compartment)
6.
Door seals
B. Refrigerator Compartment
7.
Lighting
8.
Filter in fan
8a.
button of fan
8b.
cover of fan
9.
Shelves / Shelf area
10.
Multi-flow cold air system
11.
Cooler compartment (best for meat and fish) or "Zero
Degrees" box (to keep foods fresher for longer)
12.
Rating plate with commercial name
13.
Fruits and vegetables crisper
13a.
Crisper divider
14.
Reversibility kit
15.
Separator
16.
Door trays
C. Control panel
Anti-bacterial protection (depending on the model):
- Antibacterial filter in the fan (8)
- Antibacterial additives in the Crisper (13)
- Door seals are made of material able to inhibit bacterial growth (6).
Notes:
- Depending on the model the number and type of accessories may vary.
- In case it'll have a freezer flap, please remember that to maximize the storage volume it's suggested to remove flap by bending it.
- All shelves and door trays are removable.
- The internal temperatures of the appliance depend on the ambient temperature, frequency of opening the doors, as well as location of the appliance. Temperature setting must consider these factors.
- The appliance accessories are not suitable for washing in dishwasher.
HOW TO START THE APPLIANCE
Fit the spacers (if supplied) on the upper part of the condenser at the rear of the appliance.
After plugging the appliance to the mains, it starts the operation automatically.
After starting the appliance, wait at least 4-6 hours before placing food into the appliance.
When the appliance is connected to the power supply, the display lights up and all the icons appear on the display for few seconds.
The default (factory) values of the freezer compartment and refrigerator compartment settings light-up.
In the meanwhile the appliance is working to reach the factory-set temperature, an acoustic alarm sounds, the
Alarm Icon and Freezer Temperature LEDs blink. This indicates that the appliance has not yet reached the optimal temperature for storage of foodstuffs. Press the
Reset button to silence the acoustic alarm.
The Alarm Icon is automatically turned-off as soon as the freezer compartment reaches a temperature below -
10°C and the Freezer Temperature LEDs stop blinking and shows the chosen setting.
FAN WITH A BUTTON
The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food.
By default, the fan is ACTIVE.
It is advisable to keep the fan active, so that the "6th
Sense Fresh Control" function can work and also when the ambient air temperature is above 27 ÷ 28°C or if you perceive drops of water on the glass shelves or in the severe humidity conditions.
Note
Do not obstruct the air intake area with food items.
To optimize energy consumption and to guarantee the right performance at lower ambient temperature (colder than 18°C) please turn off the fan.
To turn off the fan press the button (8a).
If the appliance has the fan it can be equipped with the antibacterial filter.
Remove it from the box (found in the crisper drawer
(item 11) and insert into the cover of fan (item 8b).
The replacement procedure is attached with the filter.
D GB F I PL
CONTROL PANEL
PRODUCT SHEET
1.
Fridge temperature LEDs
2.
On/Stand-by icon/button
3. "6th Sense Fresh Control" icon
4.
Eco Night icon/button
5.
Freezer temperature LEDs
6.
Fridge temperature / Fast Cool (press 3 sec.) button
7.
Black Out icon
8.
Reset button / Alarm icon
9.
Key Lock button
10.
Freezer temperature / Fast Freeze (press 3 sec.) button
FUNCTIONS
On/Stand-by
This function turns On/Stand-by both the refrigerator and freezer compartments. To put the product in
Stand-by, press & hold the On/Stand-by button for
3 seconds. All the icons turn off except On/Standby icon back light to indicate that the appliance is in
Stand-by. When the appliance is in Stand-by, the light inside the refrigerator compartment does not work.
Remember that this operation does not disconnect the appliance from the power supply. To switch the appliance on again, simply press the On/Stand-by button.
Fridge Temperature
To adjust the Fridge Temperature, press the Fridge
°C button. The Fridge Temperature can be adjusted between +2°C and +8°C, as shown by the Fridge
Temperature LEDs.
Freezer Temperature
To adjust the Freezer Temperature inside, press the
Freezer °C button. The Freezer Temperature can be adjusted between -16°C and -24°C, as shown by the
Freezer Temperature LEDs.
Fast Cool
Using Fast Cool function it is possible to increase the cooling in the refrigerator compartment. The use of this function is recommended when placing a very high quantity of food in the refrigerator compartment.
Press & hold for 3 sec. the Fridge °C button to activate/deactivate Fast Cool function.
When activated, the Fast Cool indication
GB will be displayed by the Fridge Temperature LEDs as shown in the beside sequence.
The function is automatically disabled after 6 hours, or can be manually disabled by pressing Fridge °C button.
Fast Freeze
The use of this function is recommended when placing a very high quantity of food to be frozen in the freezer compartment.
24 hours before freezing fresh food, press & hold for 3 sec. the Freezer button to activate the Fast Freeze function. When activated, the Fast Freeze indication will be displayed by the
Freezer Temperature LEDs as shown in the beside sequence.
After 24 hours place the food to be frozen on the upper shelf in freezer compartment (area for freezing).
The function is automatically disabled after 48 hours, or can be manually disabled by pressing Freezer °C button
Eco Night:
Eco Night function allows to concentrate the energy consumption of the product during off-peak time
(usually coinciding with night time), when energy is available in large quantity and it costs less than during the day (only in specific countries using multiple-rate system based on off-peak times - check your rate plan with your utility company). To activate the function, press the Eco Night button at the starting moment of the off-peak rate (depending on your specific rate plan). For example, if the off-peak rate starts at 20:00, you have to press the button at that time.
When the Eco Night icon is ON, the function is active. After you activate the function, the product automatically starts to adapt the energy consumption to the time, i.e. consuming less energy during the day then during the night.
IMPORTANT: In order to work in a correct way, the function must be active both during the night and the day.
The feature remains active until you deactivate it (or if a blackout occurs, or if the product is switched off).
To deactivate the function, press the Eco Night button. When the Eco Night icon is OFF the function is not active.
Note: appliance energy consumption is declared with
Eco Night function disabled.
"6th Sense Fresh Control"
This function allows optimum storage conditions
(regarding temperature and humidity) to be quickly reached inside the appliance. The fan must also be switched on for it to work properly. The "6th Sense
Fresh Control" is activated by default.
D GB F I PL
PRODUCT SHEET
To manually deactivate the function, press the
Freezer °C and Eco Night buttons for 3 sec.: you will hear double long acoustical signals as confirmation that the feature has been deactivated. The function can be reactivated by repeating the same procedure: you will hear a long acoustical signal as confirmation that the feature has been activated.
Eco Mode
This optional function can be used to save energy. To activate the Eco Mode, press Fridge °C and
Freezer °C buttons at the same time for 3 seconds until the acoustic signal sounds. Two seconds after the
Eco Mode activation, the display goes off, except the
6th Sense icon (and the alarms, if any). To adjust temperature or use other functions, it is necessary to activate the display by pressing any button. After about 15 seconds without any action, the display will
GB go off again, with the 6th Sense icon remaining visible.
To deactivate the function, press Fridge °C and
Freezer °C buttons at the same time for 3 seconds until the acoustic signal sounds. The display will come back to the normal visualization. Eco Mode function is automatically disabled after Black-out or any Failure alarm appearance. It is important to remember that this function does not disconnect the appliance from the power supply.
Key Lock
This function prevents anyone from inadvertently changing settings or switching off the appliance. To lock the keys, press Reset button for 3 seconds until the display shows the Key Lock icon: an acoustic signal confirms the function has been selected. To unlock the keys, follow the same procedure until the Key Lock icon switches off.
MALFUNCTION AND ALARM INDICATIONS:
Operation Alarms
In the event of operation alarms, they will also be displayed in the Fridge Temperature LEDs, (e.g. Failure1, Failure 2, etc...) call After-sales Service and specify the alarm code.
The acoustic alarm sounds, the Alarm icon lights up and the 3 central LEDs in the Fridge Temperature LEDs blinks according to failure code described below:
Failure code
Error 2
Error 3
Error 6
Visualization
RC & FC Set points blink on/off at 500msec. Blinks ON
2 times then remain off for 5 seconds. Pattern repeats.
RC & FC Set points blink on/off at 500msec. Blinks ON
3 times then remain off for 5 seconds. Pattern repeats.
RC & FC Set points blink on/off at 500msec. Blinks ON
6 times then remain off for 5 seconds. Pattern repeats.
x2 x3 x6
Legend: Led off Led flashing
DOOR OPEN ALARM
The Alarm icon lights up blinking and the acoustic alarm sounds.
The alarm is activated when the refrigerator's door is left open for more than 2 minutes. Close the door to disengage the alarm, or press once Reset button to mute the acoustic alarm for 2 minutes.
If the door is not closed, the acoustic alarm will sound again after two minutes. To disengage the door alarms close the door.
OVER TEMPERATURE ALARM
The acoustic alarm sounds and all the 5 Freezer
Temperature LEDs blinks.
The alarm is activated when:
• The appliance is connected to the power supply for the first time or after prolonged disuse
• The freezer compartment temperature is too high
• The quantity of foods loaded into the freezer exceeds that indicated on the data plate
• The freezer door has been left open for a long time
To mute the alarm buzzer press Reset button just once.
The Alarm Icon is automatically turned-off as soon as the freezer compartment reaches a temperature below
-10°C and the Freezer Temperature LEDs stop blinking and shows the chosen setting.
BLACK OUT ALARM
In the event of an interruption in electricity, your product is designed to automatically monitor the temperature in the freezer when electricity is resupplied. If the temperature in the freezer rises above freezing level, the
Black Out icon lit, & the Alarm Icon blinks and the acoustical alarm sounds when electricity is re-supplied. To reset the alarm press the Reset button just once.
D GB F I PL
PRODUCT SHEET
In case of Black Out Alarm, the following actions are recommended:
• If the food in the freezer is unfrozen but still cold, all the food in the freezer should be moved to the fridge compartment and eaten within the next 24 hours.
• If the food in the freezer is frozen, this indicates the food was thawed and then refrozen when electricity was re-supplied which degrades taste, quality and nutritional value and also could be unsafe. It is recommended to not consume the food but to dispose of the entire content of the freezer.
The Black Out Alarm is designed to provide guidance on food quality in the freezer in the event of electricity black out. This system does not guarantee food quality or safety and consumers are advised to use their own judgment in evaluating food quality in freezer and refrigerator compartments.
GB
DEFROSTING THE REFRIGERATOR
COMPARTMENT
Refrigerator compartment defrosting is completely automatic.
Droplets of water on the rear wall inside the refrigerator compartment indicate that the automatic defrost phase is in progress. The defrost water is automatically run into a drain hole and collected in a container, where it evaporates.
DEFROSTING THE FREEZER
COMPARTMENT
No Frost freezers provide chilled air circulation around the storage areas and prevent the formation of ice, thereby completely eliminating the need for defrosting.
Frozen items don't stick to the walls, labeling stays legible and storage space remains neat and clear.
CLEANING
Regularly clean the appliance using a cloth and a solution of warm water, with some soft detergent suitable for cleaning the inside of the refrigerator compartment.
Do not use abrasive detergents or tools.
To ensure continuous and correct flow of defrost water, regularly clean the inside of the draining hole on the back of the refrigerator near the fruit and vegetable drawer, using the tool provided.
LED's LIGHTING
If the inside LED light is not working, it must be replace by service.
Important:
The refrigerator compartment light switches on when the refrigerator door is opened. After 10 minutes of door opening the light switches off.
Before carrying out any cleaning or maintenance operation, unplug the appliance or disconnect it from the power supply.
D GB F I PL
