Whirlpool WTV4597 NFC IX Fridge/freezer combination Program Chart

Add to my manuals
4 Pages

advertisement

Whirlpool WTV4597 NFC IX Fridge/freezer combination Program Chart | Manualzz

A

1

2

7

8

9

3

4

4

5

6

PRODUCT SHEET

C

EN

HOW TO START THE APPLIANCE FIRST TIME

After plugging the appliance to the mains, it starts the operation automatically. After starting the appliance, wait at least 4-6 hours before placing food into the appliance.

When the appliance is connected to the power supply, the display lights up and all the icons appear on the display for few seconds.

The default (factory) values of the freezer compartment and refrigerator compartment settings light-up.

B 10

11

12

13

13a

14

A. Freezer Compartment

1.

Ice tray

15 16

2.

Plastic shelves

3.

Area for freezing (with/without flap)

4.

Area for storing frozen foods

5.

The freezer door tray for pizza or other frozen products with a short storage time (2** storage compartment)

6.

Door seals

B. Refrigerator Compartment

7.

Lighting

8.

Filter in fan*

9.

Shelves / Shelf area*

10.

Multi-flow cold air system*

11.

Cooler compartment (best for meat and fish)*

12.

Rating plate with commercial name

13.

Fruits and vegetables crisper

13a.

Crisper divider*

14.

Reversibility kit

15.

Separator*

16.

Door trays*

C. Control panel

Anti-bacterial protection (depending on the model):

- Antibacterial filter in the fan (8)

- Antibacterial additives in the Crisper (13)

- Door seals are made of material able to inhibit bacterial growth (6) .

Notes:

* Depending on the model the number and type of accessories may vary.

- In case it’ll have a freezer flap, please remember that to maximize the storage volume it’s suggested to remove flap by bending it.

- All shelves and door trays are removable.

- The internal temperatures of the appliance depend on the ambient temperature, frequency of opening the doors, as well as location of the appliance.

Temperature setting must consider these factors.

- The appliance accessories are not suitable for washing in dishwasher.

FAN

The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. By default, the fan is ACTIVE.

It is advisable to keep the fan active, so that the “6th

Sense Fresh Control” function can work properly and also when the ambient air temperature is above 27

÷ 28°C or if you perceive drops of water on the glass shelves or in the severe humidity conditions.

Note

Do not obstruct the air intake area with food items.

To guarantee the right performance at lower ambient temperature (colder than 18°C) and to minimize Energy

Consumption, turn off the fan.

To switch off the FAN press and hold the Freezer °C and Eco Night buttons for 3 sec.: you will hear a long acoustical signal as confirmation that the fan has been switched off.

To switched on the FAN repeat the same procedure.

If the appliance has the fan it can be equipped with the antibacterial filter .

Remove it from the box (found in the crisper drawer (item

13 ) and insert into the cover of fan.

The replacement procedure is attached with the filter.

CONTROL PANEL

1.

Fridge temperature LEDs

2.

On/Stand-by icon/button

3.

“6th Sense Fresh Control” icon

4.

Eco Night icon/button

5.

Freezer temperature LEDs

6.

Fridge temperature / Fast Cool (press 3 sec.) button

7.

Black Out icon

8.

Reset button / Alarm icon

9.

Key Lock button

10.

Freezer temperature / Fast Freeze (press 3 sec.) button

GB RU IL AE

PRODUCT SHEET

FUNCTIONS

On/Stand-by

This function turns On/Stand-by both the refrigerator and freezer compartments. To put the product in

Stand-by, press & hold the On/Stand-by button for

3 seconds. All the icons turn off except On/Standby icon back light to indicate that the appliance is in Stand-by. When the appliance is in Stand-by, the light inside the refrigerator compartment does not work. Remember that this operation does not disconnect the appliance from the power supply. To switch the appliance on again, simply press the

On/Stand-by button.

EN during the day (only in specific countries using multiple-rate system based on off-peak times - check your rate plan with your utility company). To activate the function, press the Eco Night button at the starting moment of the off-peak rate (depending on your specific rate plan). For example, if the off-peak rate starts at 20:00, you have to press the button at that time.

When the Eco Night icon is ON, the function is active. After you activate the function, the product automatically starts to adapt the energy consumption to the time, i.e. consuming less energy during the day then during the night.

Fridge Temperature

To adjust the Fridge Temperature, press the Fridge

°C button. The Fridge Temperature can be adjusted between +2°C and +8°C, as shown by the Fridge

Temperature LEDs.

Freezer Temperature

To adjust the Freezer Temperature inside, press the

Freezer °C button. The Freezer Temperature can be adjusted between -16°C and -24°C, as shown by the Freezer Temperature LEDs.

IMPORTANT : In order to work in a correct way, the function must be active both during the night and the day.

The feature remains active until you deactivate it

(or if a blackout occurs, or if the product is switched off). To deactivate the function, press the Eco

Night button. When the Eco Night icon is OFF the function is not active.

Note: appliance energy consumption is declared with

Eco Night function disabled.

Fast Cool

Using Fast Cool function it is possible to increase the cooling in the refrigerator compartment. The use of this function is recommended when placing a very high quantity of food in the refrigerator compartment. Press & hold for 3 sec. the

Fridge °C button to activate/deactivate

Fast Cool function. When activated, the

Fast Cool indication will be displayed by the Fridge Temperature LEDs as shown in the beside sequence. The function is automatically disabled after 6 hours, or can be manually disabled by pressing Fridge °C button.

“6th Sense Fresh Control”

This function allows optimum storage conditions

(regarding temperature and humidity) to be quickly reached inside the appliance.

The fan must also be switched on for it to work properly. The “6th Sense Fresh Control” is activated by default.

To manually deactivate the function, press the

Freezer °C and Eco Night buttons for 3 sec.: you will hear a long acoustical signal as confirmation that the feature has been deactivated.

The function can be reactivated by repeating the same procedure: you will hear double acoustical signals as confirmation that the feature has been activated. In the event of an interruption in electricity or exit from Stand-by to normal mode, the “6th Sense

Fresh Control” status resets to default i.e. active.

Fast Freeze

The use of this function is recommended when placing a very high quantity of food to be frozen in the freezer compartment.

24 hours before freezing fresh food, press & hold for 3 sec. the Freezer button to activate the Fast Freeze function. When activated, the Fast

Freeze indication will be displayed by the

Freezer Temperature LEDs as shown in the beside sequence. After 24 hours place the food to be frozen on the upper shelf in freezer compartment (area for freezing). The function is automatically disabled after 48 hours, or can be manually disabled by pressing Freezer °C button

Eco Night:

Eco Night function allows to concentrate the energy consumption of the product during off-peak time

(usually coinciding with night time), when energy is available in large quantity and it costs less than

Note: Remember that deactivation function “6th

Sense Fresh Control” switch off the FAN.

Smart Display

This energy saving feature allows to reduce power consumption by automatically turning off the display when not in use. To activate the Smart Display, press

Fridge °C and Freezer °C buttons at the same time for 3 seconds until the acoustic signal sounds.

After the Smart Display activation, the display goes off, except the “6th Sense Fresh Control” icon (and the alarms, if any).

To adjust temperature or use other functions, it is necessary to activate the display by pressing any button. After about 15 seconds without any action, the display will go off again, with the “6th Sense

Fresh Control” icon remaining visible.

To deactivate the function, press Fridge °C and

Freezer °C buttons at the same time for 3 seconds until the acoustic signal sounds.

GB RU IL AE

PRODUCT SHEET

The display will come back to the normal visualization. Smart Display function is automatically disabled after Black-out. It is important to remember that this function does not disconnect the appliance from the power supply.

EN

Key Lock

This function prevents anyone from inadvertently changing settings or switching off the appliance. To lock the keys, press Reset button for 3 seconds until the display shows the Key Lock icon : an acoustic signal confirms the function has been selected. To unlock the keys, follow the same procedure until the Key Lock icon switches off.

MALFUNCTION AND ALARM INDICATIONS:

Operation Alarms

In the event of operation alarms, they will also be displayed in the Fridge Temperature LEDs, (e.g. Failure1, Failure 2, etc...) call After-sales Service and specify the alarm code.

The acoustic alarm sounds, the Alarm icon lights up and the 3 central LEDs in the Fridge Temperature LEDs blinks according to failure code described below:

Failure code

Error 2

Error 3

Error 6

Visualization

RC & FC Set points blink on/off at 0,5 sec. Blinks ON

2 times then remain off for 5 seconds. Pattern repeats.

RC & FC Set points blink on/off at 0,5 sec. Blinks ON

3 times then remain off for 5 seconds. Pattern repeats.

RC & FC Set points blink on/off at 0,5 sec. Blinks ON

6 times then remain off for 5 seconds. Pattern repeats.

x2

x3

x6

Legend: Led off Led flashing

DOOR OPEN ALARM

The Alarm icon lights up blinking and the acoustic alarm sounds. The alarm is activated when the refrigerator’s door is left open for more than 2 minutes.

Close the door to disengage the alarm, or press once

Reset button to mute the acoustic alarm for 2 minutes.

If the door is not closed, the acoustic alarm will sound again after two minutes. To disengage the door alarms close the door.

OVER TEMPERATURE ALARM

The acoustic alarm sounds and all the 5 Freezer

Temperature LEDs blinks. The alarm is activated when:

• The appliance is connected to the power supply for the first time or after prolonged disuse

• The freezer compartment temperature is too high

• The quantity of foods loaded into the freezer exceeds that indicated on the data plate

• The freezer door has been left open for a long time

To mute the alarm buzzer press Reset button just once.

The Alarm Icon is automatically turned-off as soon as the freezer compartment reaches a temperature below

-10°C and the Freezer Temperature LEDs stop blinking and shows the chosen setting.

BLACK OUT ALARM

In the event of an interruption in electricity, your product is designed to automatically monitor the temperature in the freezer when electricity is resupplied. If the temperature in the freezer rises above freezing level, the

Black Out icon lit, & the Alarm Icon blinks and the acoustical alarm sounds when electricity is re-supplied.

To reset the alarm press the Reset button just once.

In case of Black Out Alarm, the following actions are recommended:

• If the food in the freezer is unfrozen but still cold, all the food in the freezer should be moved to the fridge compartment and eaten within the next 24 hours.

• If the food in the freezer is frozen, this indicates the food was thawed and then refrozen when electricity was re-supplied which degrades taste, quality and nutritional value and also could be unsafe. It is recommended to not consume the food but to dispose of the entire content of the freezer.

The Black Out Alarm is designed to provide guidance on food quality in the freezer in the event of electricity black out. This system does not guarantee food quality or safety and consumers are advised to use their own judgment in evaluating food quality in freezer and refrigerator compartments.

GB RU IL AE

PRODUCT SHEET

HOW CAN INCREASE THE FREEZER

COMPARTMENT CAPACITY

In certain models you can increase the freezer compartment capacity by:

- Removing the flap (if present).

- Removing the turntable only.

Please refer to the figures beside to see how to proceed.

EN

COMPARTMENT

Refrigerator compartment defrosting is completely automatic.

Droplets of water on the rear wall inside the refrigerator compartment indicate that the automatic defrost phase is in progress. The defrost water is automatically run into a drain hole and collected in a container, where it evaporates.

How to make ice cubes

Depending on the model:

With a turntable and ice-cube trays

• Remove the turntable, fill the trays with water to approx. 3/4 and place back in the appliance.

• The ice-cubes will be automatically ejected into the container after turning the ice-cube tray knobs

With an ice-cube tray

• Fill the ice-cube tray with water to approx. 3/4 and insert it into the freezer compartment.

• Do not use any sharp or cutting items to remove the tray.

DEFROSTING THE FREEZER COMPARTMENT

No Frost freezers provide chilled air circulation around the storage areas and prevent the formation of ice, thereby completely eliminating the need for defrosting.

Frozen items don’t stick to the walls, labeling stays legible and storage space remains neat and clear.

LED’s LIGHTING

If the inside LED light is not working, it must be replace by service.

Important:

The refrigerator compartment light switches on when the refrigerator door is opened. After 10 minutes of door opening the light switches off.

CLEANING

Regularly clean the appliance using a cloth and a solution of warm water, with some soft detergent suitable for cleaning the inside of the refrigerator compartment.

Do not use abrasive detergents or tools.

To ensure continuous and correct flow of defrost water, regularly clean the inside of the draining hole on the back of the refrigerator near the fruit and vegetable drawer, using the tool provided.

Before carrying out any cleaning or maintenance operation, unplug the appliance or disconnect it from the power supply.

DEFROSTING THE REFRIGERATOR

GB RU IL AE

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement