advertisement
30115273GB.fm Page 1 Monday, August 8, 2011 11:18 AM
GB AWM 1020
A. “On/Off” button
B. Programme selector
C. “Start (Pause)” button
D. Option buttons
E. Modifiers
F. “Start delay” button
G. “Favourites” button
H. “Reset (Drain)” button
Programme
Cotton /
(Antibacterial)
Coloured
Synthetics
Jeans
Daily
Care labels 2)
+++ energy wash
D
Type of wash/Notes
PROGRAMME CHART
Rapid
- Respect the manufacturer’s recommendations on the care label.
On/Off
Coloured
Synthetics
Jeans
A
Daily
Quick wash
Outdoor
Gentle Spin
Cotton
(Antibacterial)
B
I / J
Start
(Pause)
I. Programme sequence indicator
Big Items
Delicates
Wool
Handwash
Super
Eco
Rinse&
Spin
Drain&
Spin C
Reset
(Drain) H
F
95°
60°
40°
30°
20°
1200
1000
800
400
0
Max.
Load
Detergent and additives
Prewash Main wash
Softener Rapid Easy ironing
G
E
+
D
AWM 1020
J. Overdosage indication
Selecting any option the indication lights up. When the combination of programme, additional options/modifiers and temperature is not possible, the indication lights switch off automatically and a signal sounds.
❉ : optional / Yes: dosing required.
Special Options and Modifiers
Rinse hold
Rinse sensitive skin
Intensive rinse
Prewash Clean + Soiled
Heavy soil
Start delay
Max.
Spin
Speed rpm
Temperature kg °C
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
At a temperature of 95°C, this programme eliminates bacteria, ensuring sanitization of your laundry.
Lightly to normally soiled bed linen, table linen, shirts, trousers etc. made of cotton and linen.
11.0
10.0
❉ Yes ❉
❉ Yes ❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉ ❉ ❉ 1200 20 to 95
❉ ❉ ❉ 1200 20 to 40
Lightly to normally soiled blouses, shirts etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
5.5
Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets.
11.0
❉ Yes ❉ ❉ ❉ ❉
❉ Yes ❉ — — ❉
❉
❉
❉
❉
❉
❉
❉ ❉ ❉
1000
1) 20 to 60
❉ ❉ ❉ 1200 20 to 60
Programme for lightly to normally soiled fabrics made of cotton and/or synthetic fibres.
6.0
— Yes ❉ — ❉ ❉ ❉ ❉ — ❉ — ❉ 1200 20 to 60
1)
2)
Quick wash
Outdoor
Lightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.
Normally soiled and sweaty sportswear made of cotton jersey or microfibres.
Use a special detergent for garments made of microfibres. Do not add any softener.
6.0
5.5
— Yes ❉ — — — ❉
❉ Yes — — — ❉ ❉
❉
❉
—
❉
❉ — ❉ 1200 20 to 30
— — ❉
1000
1) 20 to 60
Big items
Blankets made of synthetic fibres, bedcovers filled with polyester or other artificial fibres, sleeping bags, bathmats and similar items.
4.0
❉ Yes ❉ — — ❉ ❉ ❉ ❉ — ❉ ❉
1000
1) 20 to 95
Delicates
Curtains and delicate dresses, skirts, shirts and blouses.
4.0
❉ Yes ❉ — ❉ ❉ ❉ ❉ ❉ ❉ — ❉
1000 1) 20 to 40
Wool
Handwash
SuperEco
Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
A very gentle spin is used in this programme.
Heavily soiled and robust bed linen, table linen and underwear, towels, shirts etc. made of cotton and/ or linen.
Economical energy consumption by prolonged wash duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, select “Rinse hold” option and start spinning in the morning, or define programme start with “Start delay” accordingly.
3.0
3.0
11.0
— Yes ❉ — — ❉
— Yes ❉ — — ❉
— Yes ❉ — — ❉
❉
❉
❉
❉
❉
❉
— — — ❉
1000 1) 20 to 40
— — — ❉
800
1)
—
20 to 30
❉ — ❉ 1200 20 to 60
Gentle Spin —
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
3.0
— — — — — — —
Rinse & Spin —
Same as the last rinse and the final spin in the “Coloured” programme.
11.0
— — ❉ — — — ❉
Drain & Spin —
Use this programme to drain your washer or to drain and spin your wash load.
Delicate fabrics, handwashables and woolens should be drained with no spin or low spin speed to avoid fabric stress.
For improved garment care, spin speed is restricted in these programmes.
In this column are indicated the most appropriate care labels, but not all which are possible to be treated with the programme.
11.0
— — — — — — —
The wool cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0805
— — — — ❉
1000 1) —
❉ — — — ❉ 1200 —
— — — — ❉ 1200 —
Whirlpool is a registered trademark of Whirlpool USA
5019 301 15273
Black process 45,0° 150,0 LPI
30115273GB.fm Page 2 Monday, August 8, 2011 11:18 AM
For any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.
CONSUMPTION DATA
Programme
Cotton
Cotton
Cotton
*
*
*
Coloured o
Coloured
Coloured
Coloured
Synthetics o
Synthetics
Jeans
Daily
Quick wash
Outdoor
Big items
Delicates
Wool
Handwash
SuperEco
Temperature
(°C)
60
60
40
30
30
40
30
40
40
40
40
30
60
40
40
40
40
40
Load
(kg)
11.0
5.5
5.5
10.0
5.5
3.5
1.0
5.5
3.0
11.0
6.0
6.0
5.5
4.0
4.0
3.0
3.0
11.0
Water
(l)
82
54
54
78
62
43
27
65
45
125
57
50
63
86
83
65
96
97
Energy
(kWh)
1.38
1.15
0.81
0.95
0.76
0.50
0.40
0.70
0.60
0.95
0.75
0.45
0.54
0.90
0.50
0.70
0.45
1.51
Approximate programme duration
(hours : minutes) without “Rapid” with “Rapid”
2:25 o 4:00
3:45
3:40
2:35
1:45
1:30
0:50
1:55
1:25
2:00
1:00
0:30
1:30
1:20
0:50
0:45
0:40
5:10
**
**
2:10
**
**
**
1:40
**
—
—
—
—
—
—
—
—
—
Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and the table; changing the options or modifiers setting will also change the consumption data.
o
“Troubleshooting Guide” in your Instructions for Use).
Automatic adaptation of programme duration after detection of wash load.
Recommended programmes for comparative tests at test institutes
ADD DETERGENT, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add the detergent as described in the programme table or in the chapter “Detergent and Additives” in your Instructions for Use.
1.
Press “On/Off” to switch on the washer. The light of the selected programme is on, and the “Start (Pause)” button blinks.
2.
Turn the programme selector to the desired programme - it is marked by a light.
3.
The predefined temperature and spin speed can be altered by pressing the “Temperature”
modifier.
and the “Spin speed”
SELECT ANY DESIRED OPTION OR MODIFIER
Selecting any option or modifier, the indication lights up. If the combination of programme, options or modifiers is not possible, the indication lights switch off automatically and a signal sounds.
“Rapid” button
• Enables quicker washing by shortening the programme duration.
• Recommendable for lightly soiled laundry.
“Easy ironing” button
• Reduces creasing by increased water quantity and a very gentle spin.
“Rinse hold” button
• The laundry remains in the last rinse water without being spun: this prevents creasing and colours from changing.
• Particularly useful if you want to postpone spinning to a later time, or if you want to drain only.
• Do not leave the laundry to soak in the rinse hold for too long.
Note: The programme starts to “Rinse hold” when the “Rinse hold” button light blinks; the “Start (Pause)” button light also blinks.
Terminate the “Rinse hold” option :
• Press the “Rinse hold” or the “Start (Pause)” button ; the programme will terminate automatically with the final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, press and hold the
“Reset (Drain)” button for a few seconds. The water is drained out then, before the door can be opened.
“Spin speed” modifier
• Every programme has an automatic predefined spin speed.
• Press the button to set another spin speed.
• Spin speed “0” is only selectable for programme “Drain &
Spin”; the final spinning is cancelled in this case - the water is drained out only at the end of the programme.
“Rinse” modifier
•
•
“Sensitive skin”: maximum amount of rinse water is added, and rinse cycle is prolonged.
“Intensive rinse”: more rinse water is added, and rinse cycle is prolonged.
• Particularly suitable for areas with very soft water, for baby clothes or to help people with skin allergies.
“Options” modifier
➡ Prewash :
• Adds a prewash cycle to the programme selected.
• Use only for heavily soiled loads (e.g. sand, granular dirt).
• Increases the cycle time by approx. 15 minutes.
• Do not use liquid detergent for the main wash when activating “Prewash”.
Clean +
• Choose this option if you use an in-wash additive for stain removal
(powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.
• Use with maximum load.
• Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.
• May prolong the programme by up to 15 minutes.
• Appropriate for use of stain removers and bleaches on oxygen basis. Chlorine or perborate bleaches must not be used!
Normal
“Soil level” modifier
• Adapts the programme duration to the soil level of your laundry.
= Normal / = Soiled / = Heavy soil
SAVE YOUR FAVOURITE PROGRAMMES
If there is a programme setting which you use frequently, the washing machine offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.
• Select the desired programme, temperature, spin speed and options/modifiers.
Press and hold the “Favourites” button for some seconds; the light goes on and a signal sounds when the programme setting is saved.
Next time you want to use your individual programme setting, turn the programme selector to the desired programme, shortly push the
“Favourites” button and start by pressing “Start (Pause)” .
If you want to replace the saved setting by another one:
• Select the programme desired and the new temperature, spin, options/modifer setting.
• Press and hold the “Favourites” button some seconds; the previously saved setting is replaced by the new one.
START DELAY
The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.
• Select programme, temperature and options/modifiers as desired.
• Press the “Start delay” button to select the delay time by 1 to 24 hours.
• Press and hold the “Start (Pause)” button ; the countdown of the delay time begins. The light of the “Start delay” button will keep blinking until the programme starts.
• The time delay indication disappears when the programme starts and it is replaced by the remaining time.
To cancel the “Start delay”:
• Press “Start (Pause)” , or press and hold “Reset (Drain)”
- the delay time will disappear from the display.
PROGRAMME START
Turn on the tap and press and hold the “Start (Pause)” button - the blinking “Start (Pause)” button light becomes constant; it will take some time until water enters into the washing machine.
The programme sequence indicator on the display shows the sequence reached in the programme. After starting the programme, the indication runs from left to right through prewash, wash, rinse, spin. When a programme sequence is finished, the corresponding symbol goes off.
The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the display and the “6 th Sense”
ADD WASHING/DOOR LOCK
As soon as a programme starts, the “Door locked” symbol lights up on the display.
You can interrupt the programme by pressing “Start (Pause)”
- the light blinks. The “Door locked” symbol on the display goes off and you can open the door. In certain programme phases, the “Door locked” symbol remains lit to show that the door cannot be opened in the present programme phase, e.g. when the water level is too high.
To continue the programme, just close the door and press “Start
(Pause)” again.
PROGRAMME END
“End” appears on the display, and a signal sounds.
1.
Switch the machine off by pressing “On/Off” (if you do not, the machine will switch off automatically about 5 minutes after programme end).
2.
Turn off the tap and open the door to unload your washing. Leave the door open for some time so that the washer’s inside can dry.
DETERGENT OVERDOSAGE INDICATION
The symbol will light up if you used too much detergent. Use less detergent next time. If the symbol lights up and the display shows
“Fod”, too much foam interrupted the wash process; refer to the
“Troubleshooting Guide” in your Instructions for Use.
CHANGE THE PROGRAMME, TEMPERATURE,
OPTIONS AFTER PROGRAMME START
1.
Press the “Start (Pause)” button to interrupt the programme. The light blinks.
2.
Select the new programme, temperature and options/ modifiers as desired.
3.
Press and hold the “Start (Pause)” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
RESET A RUNNING PROGRAMME BEFORE
THE END
Press and hold the “Reset (Drain)” button for a few seconds; the light blinks. It will take some time until the water is drained out and the door can be opened (up to 10 minutes).
Caution, the washing might still be hot!
Whirlpool is a registered trademark of Whirlpool USA
5019 301 15273
Black process 45,0° 150,0 LPI
advertisement
Related manuals
advertisement