Copper Chef Crumby CRB-CC User Manual

Copper Chef Crumby CRB-CC User Manual

Copper Chef Crumby CRB-CC is a handheld vacuum cleaner designed for quick cleanup of small, dry messes on various surfaces. It features a powerful motor and a filter to capture particles like crumbs, sugar, coffee grounds, and more. Perfect for use on countertops, tables, carpets, sofas, car interiors, and more. It's easy to use, with a simple on/off switch and a removable base cover for emptying and cleaning.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Manual
Copper Chef Crumby CRB-CC User Manual | Manualzz

for life’s little messes

USER MANUAL

• Runs on 2 x 1.5V AA batteries

• Motor voltage: DC 3.0 V

• Approximate run time: 2 hours (per battery pair)

• Cleaning capacity: 2.5 tablespoons

USAGE:

For clean-up of small, dry particles and debris from hard and upholstered surfaces such as: countertops, desks, tables, tile and wood floors, low to moderate pile carpeting, sofas, chairs, beds, blankets, leather surfaces, car interiors, bags and suitcases.

Works great on the following: crumbs, sugar, salt, pepper, sprinkles, coffee grounds, baby formula, glitter, pencil shavings, dried play dough, dirt, sand and ice-melt.

OPERATION:

INSTALLING BATTERIES:

1. Open upper dome housing by rotating it counter-clockwise.

Indicator line on edge of dome housing should move from

“CLOSE” to “OPEN” (see Fig.1).

2. Install 2 x 1.5V AA batteries following the indicated polarity

(see Fig. 2).

3. Replace upper dome housing.

Fig. 1 Fig. 2

TURNING ON /OFF:

1. Use thumb (or finger) to slide power switch located on side of unit from “OFF” to “ON”

(see Fig. 3).

Fig. 3

EMPTYING/CLEANING:

1. Remove base cover by pressing tab labeled

“PUSH” while tilting base cover downward to separate it from upper housing (see Fig. 4).

2. Remove filter assembly by simply pulling it out of upper housing. It will “snap” free to expose the motor turbine.

MAINTENANCE:

1. Empty debris particles from base cover into trash after each use for best performance.

2. Completely remove base cover and filter assembly from unit for cleaning. Rinse base cover and filter under warm water to clean leftover particles and residue. Make sure cover and filter are completely dry before reassembling.

3. Do not expose upper housing or motor components to water. These components should be cleaned using only compressed air or a small brush if needed.

4. If a decrease in cleaning performance is noticed, empty base cover, check for blockages, and replace batteries if need be.

PRECAUTIONS:

1. Do not use on wet or moist surfaces & messes. This may damage the motor and electrical components.

2. Do not use to clean up glass, metal, or other potentially hazardous materials.

3. Maximum particle size CRUMBY™ can handle is approximately 0.25” diameter. Particles larger than this may clog the opening or bind the motor and damage the unit. Please pick up large particles by hand.

4. To avoid risk of injury, keep fingers and other body parts clear from opening on base cover of unit when in use.

5. Never operate unit without the base cover and filter properly installed.

6. Children should not operate this cleaner unless closely supervised by an adult. Recommended for children over 3 years.

Distributed by:

Tristar Products, Inc.

Fairfield, NJ 07004.

©2017 Tristar Products, Inc.

CRB-CC_IB_ENG_V1_171221

advertisement

Related manuals

Download PDF

advertisement