Bauknecht ELPE 6260 IN Oven Program Chart


Add to my manuals
4 Pages

advertisement

Bauknecht ELPE 6260 IN Oven Program Chart | Manualzz

ELPE 6260

DE AT

PRODUCT DESCRIPTION SHEET

Top shelf

Bottom shelf

1 2

1. Control knob for front left hotplate

0 1 ...10

*.

2. Control knob for rear left hotplate

0 1 ...10

*

3. ON/OFF - Function Selector Knob

4. Button to select and confirm programmes

5. Pre-set values modification knob

(temperature, time, levels)

3

1.

Control panel

2.

Cooling fan

1)

(hidden)

3.

Grill safety guard

2)

4.

Door lock

3)

5.

Catalyser

6.

Upper heating element safety guard

7.

Upper heating element

8.

Rear light

4)

9.

Round heating element

10. Oven fan

11. Lower heating element (hidden)

12. Oven door

1)

Fan operation switches on only when the oven has reached a certain temperature, and may continue even after the appliances

3)

An automatic “door lock” mechanism activates during pyrocleaning and the indicator lamp lights up on the display “ ”. have been turned off, for a few minutes. During the pyro-clean cycle the fan runs faster than during normal cooking functions.

2)

Prevents food from coming into direct contact with the grill.

Nevertheless, you are advised not to touch the safety guard whilst the oven is on.

The oven door will heat up during pyro-cleaning hence children must be kept well clear of the appliance.

4)

Opening the oven door when the oven is off, the internal light will come on.

ACCESSORIES

Wire Shelf: Drip tray:

CONTROL PANEL

4 5 6 7 8

6. Control knob for rear right hotplate

0 1 ...10

*.

7. Control knob for front right hotplate

0 1 ...10

*.

8. Cooktop ON indicator light

* The multizone function can only be switched on for those hotplates of the cooktop equipped with double or triple zone function.

(See hotplate functions table)

Retractable knobs

• To use this type of knob, press it in the middle.

• The knob comes out.

• Turn it to the required position.

Once cooking is over, turn the knob to 0 and press it again to restore it to its original position.

Oven function chart

Function

-

Oven OFF

Preset temperature

Temperature range

-

Description of function

LAMP • To switch on the oven light.

MLTF (Heat

Maintenance)

STATIC

FAN/

THERMOVENTILATED

GRILL

TURBO GRILL

PIZZA/BREAD

BOOSTER

PYRO-CLEAN

35°C

225°C

200°C

3

3 -

-

• To maintain a constant temperature inside the oven.

• 35°C: to raise pasta, bread and pizza.

• 60°C: to keep cooked food warm.

• Ideally the first shelf level should be used.

50°C - 250°C

• To cook meat, fish and chicken on the same level.

• Preheat the oven to the required cooking temperature and place food in the oven as soon as the indicator light “C” switches off.

• Ideally, the second or third shelf level should be used.

50°C - 250°C

• To cook (without preheating) foods that require the same cooking temperature on one or more levels (e.g.: fish, vegetables, sweets), without transferring odours from one foodstuff to the other.

-

• To grill steak, kebabs and sausages, to cook vegetables au gratin and to toast bread.

• This function can be set to different power levels (min. 1 - max.

5).

• Preheat the oven for 3 - 5 min.

• The oven door must be kept closed during the cooking cycle.

• When cooking meat, pour a little water into the drip tray

(on the bottom level) to reduce smoke and fat spatters.

• Ideally the meat should be turned during cooking.

• To grill large joints of meat (roast beef and other roast meats).

• This function can be set to different power levels (min. 1 - max.

5).

• Preheat the oven for 3 - 5 min.

• The oven door must be kept closed during the cooking cycle.

• When cooking meat, pour a little water into the drip tray

(on the bottom level) to reduce smoke and fat spatters.

• Ideally the meat should be turned during cooking.

-

225°C

P1- 300°C

P2- 220°C

• To bake pizza, bread, focaccia.

50°C - 250°C

• To preheat the oven rapidly.

• As the temperature increases the “C” indicator will light up.

• The booster function cuts out automatically when the programmed temperature is reached. The acoustic signal will sound and the appliance switches to the STATIC cooking function.

Further details can be found in the instruction manual.

• Self-cleaning time can be set from a minimum of 2 minutes to a maximum 3 hours.

PYRO-CLEAN

EXPRESS

Further details can be found in the instruction manual.

• For a preset self-cleaning time of 1 hour 15 minutes.

Important notes:

During the self-clean cycle you are advised not to remove any of the accessories provided with the oven to prevent any further increase in the outside temperature of the door and to assure more thorough cleaning of the lower part of the oven.

5019 410 56251

COOKING TABLES

FOOD Function Pre heating

Level

(from the bottom)

Browning Temperature level (°C)

Cooking time

(minutes)

X 2 2 200 90 - 110

Lamb, mutton

X 2 2 200 90 - 110

Roast

(Veal, Pork,

Beef)

(kg. 1)

M

E

A

T

Chicken, Rabbit,

Duck

X

X

X

X

2

2

2

2

2

2

2

2

200

200

200

200

100 - 110

100 - 110

80 - 90

80 - 90

Turkey

(kg. 3-4)

Goose (2 Kg)

F

I

S

H

(WHOLE)

(1-2 kg)

Gilt-head, Bass,

Tuna,

Salmon, Cod

(CUTLETS)

(1 kg.)

Sword Fish, Tuna

E

T

C

E

C

T

I

O

C

O

N

F

N

A

R

Y

C

A

K

E

S

P

I

Z

Z

A

B

R

E

A

D

E

S

T

A

B

L

V

E

G

E

Stuffed peppers and tomatoes

Roast potatoes

Pizza - Bread

Leavened cakes

Filled pies

(with cheese)

Tarts

Apple strudel

Biscuits

P1

P2

P1

P2

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

2

2

2

2

2

1-3

1-3

2

2

2

2

1

1

2

2

2

2

2

2

2

2

2

2

2

2

1-3

1

3

-

-

-

-

-

-

-

-

-

-

-

-

-

3

3

3

3

1

-

-

-

-

3

-

200

200

200

200

200

190

200

190

200

190

200

200

260 - 240

220 - 240

260 - 240

220 - 240

170

180

190

180

180

180

200

190

160

150

160 - 180

160 - 180

100 - 130

100 - 130

50 - 60

50 - 60

50 - 60

50 - 60

60 - 70

60 - 70

50 - 60

50 - 60

15 - 20

15 - 20

20 - 30

20 - 30

40 - 50

40 - 50

70 - 90

70 - 90

50 - 60

50 - 60

50 - 60

50 - 60

30 - 40

30 - 40

FOOD Function Pre heating

X

Level

(from the bottom)

Browning Temperature level (°C)

Cooking time

(minutes)

2 190 40 - 50

C

A

K

E

S

Choux buns

Savoury pies

X

X

X

1-3

2

2

-

-

-

180

200

180

C

O

T

I

O

N

N

F

E

C

A

R

Y

Filled fruit pies e.g. Pineapple,

Peach

Meringues

Vol-au-vents

X

X

X

X

X

X

2

2

2

1-3

2

2

-

-

-

-

-

-

180

180

120

120

200

190

X 2 200

E

T

C

Soufflés

X 2 190

X 2 1 200

Lasagna

X 2 190

COOKING TABLE FOR GRILL

FUNCTION

FOOD Function Pre heating

Level

(from the bottom)

Power level

Steak X 3-4 4-5

40 - 50

50 - 60

50 - 60

50 - 60

50 - 60

150 - 180

150 - 180

30 - 40

30 - 40

50 - 60

50 - 60

50 - 60

50 - 60

Cooking time

(minutes)

40 - 50

F

I

S

H

M

E

A

T

Cutlets

Sausages

Chops

Chicken legs

Kebabs

Spare ribs

1/2 chicken

1/2 chicken

Whole chicken

Roast

(pork, beef)

Duck

Leg of lamb

Roast beef

Roast potatoes

Fish (gilthead, trout)

Fish (steaks)

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

3

2

3-4

3-4

2

3-4

3-4

3-4

3-4

2

2

2

2

3

2

3-4

4-5

4-5

4-5

3-4

2-3

4-5

4-5

4-5

4-5

3

3

3

3

3-4

2-3

4-5

70 - 80

80 - 90

70 - 80

50 - 60

50 - 60

50 - 60

30 - 40

30 - 40

30 - 40

30 - 40

40 - 50

40 - 50

40 - 50

50 - 60

50 - 60

60 - 70

N.B: GRILL, turn meats halfway through cooking time.

Cooktop Functions Table (depending on model)

Function Description of function

HEAT

MAINTENANCE

To allow dough to rise, to soften butter taken from the fridge, to keep baby bottles or food warm, also for making yoghurt, melting chocolate, etc.

This function is only available when the residual heat indicator is on. For this function, make sure the residual heat indicator of the desired hotplate is on. Turn the knob to . To deselect the function, change the position of the knob.

To maintain a constant temperature of 60° until the end of cooking. To select this function, turn the knob to .

This function is used to bring water to the boil rapidly and remains on for a preset time. At the end of the preset time, the cooktop automatically returns to the maximum power setting.

This function can be selected even during cooking. Important: Before selecting this function, make sure the pot is positioned on the selected hotplate in order to avoid any damage to the cooktop surface. The stated performance values for this function are those guaranteed for all glass ceramic cooktops. For this function, place the pot on the selected hotplate and turn the knob to . To deselect, change the position of the knob.

The multizone symbol, featured on the knobs, can only be switched on for those hotplates of the cooktop equipped with double or triple zone function. These functions extend the heating area of the cooktop in order to allow the use of large, oval or rectangular pots or cooking receptacles. To switch on the dual zone (if available), turn the knob to and wait until the residual heat indicator for the hotplate begins to flash. To switch on the triple zone function (if available), wait until the LED begins flashing quickly. Select the power setting required by turning the knob anti-clockwise. The residual heat indicator remains on to indicate that the cooktop is in use. To deselect, turn the knob to "0".

HOW TO OPERATE THE COOKTOP

The oven control panel features 4 adjustable knobs for cooktop operation. The cooktop control knobs are marked with a numerical scale corresponding to different power settings, and a series of function symbols.

• Turn the control knob of the relevant hotplate clockwise to the desired power setting (see the instructions supplied with the cooktop).

GB

GUIDE TO USING THE ELECTRONIC PROGRAMMER

Electronic Display Operating the oven using the electronic programmer programmer

Selecting the cooking time:

Select the cooking time (available with any function) to turn the oven on for a specified period of time. At the end of the specified time the oven will switch off automatically. The maximum programmed cooking time is 3 hours and 59 minutes.

Heat

Temperature increase indicators

Maintenance

Extra

1. Set the function and temperature or grill level (see chapter: “Fast starting the oven” and “Selecting the cooking function”).

browning

2. Repeatedly press the button , the indicator blinks on the display and “-0:00” appears.

!

ON/OFF - Function Selector Knob

Button to select and confirm programmes

!

Knob to change preprogrammed values

(temperature, time, levels)

Cooking time End of cooking time

Clock

3. Turn knob

!

clockwise: the selected time blinks on the display. The appearance of the dash”-” indicates that the chosen time decreases until “0” is reached.

4. The oven automatically starts cooking 20 seconds after the setting and the time remaining until the end of cooking appears on the display.

Note.: To view or change the previously set temperature, turn the knob

!

by one click. To return to the display of the remaining time, wait 20 seconds or press the button .

To use the special functions Extra browning and Heat Maintenance , the chapter “Special functions”.

Fast starting the oven

When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates “

To switch on the oven:

”.

1. Turn knob to “0”.

2. press the button. The display shows 0:00 “--:--”.

Selecting and changing the clock time:

1. Press the button three times.

2. Turn the knob within 15 seconds to set the time of day. The time of day flashes on the display.

3. Press the button or wait 15 seconds to get automatic confirmation of the setting.

To modify the time of the day:

Press the button twice blinks on the display. Repeat the steps described above.

Select cooking function:

1. Turn knob to the chosen function: the preset temperature or grill level will flash on the display.

2. If this value is right, press the button to confirm or wait 10 seconds to have the setting accepted automatically.

To change the pre-set temperature or grill level:

1. Turn knob

!

: the temperature (or grill level when knob is on the selection ) blinks on the display.

2. Press button to confirm or else wait about 10 seconds to have the setting accepted automatically.

The oven begins operation about 5 seconds after confirmation: the temperature increase indicators on the display turn on sequentially, indicating the temperature increase on the graduated scale °C.

Note.:

The set values can be changed even during cooking.

At the end of cooking:

Switch off the oven by turning knob back to“0”. The time of day appears again on the display.

To modify the chosen temperature or grill level:

Turn the knob

!

and confirm by pressing the button or wait about 10 seconds for automatic acceptance of the setting.

Appearance of on the display:

When the pre-set time (end of cooking) runs out, appears on the display and an acoustic signal sounds for 15 minutes in intervals. The oven switches off automatically and the oven's interior lamp stay on for 25 min.

1. Press button to stop the acoustic signal.

2. Turn knob back to “0”. The lamp turns off.

The time of day appears again on the display.

Setting end of cooking time

By using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and 59 minutes.

1. Set the function and temperature or grill level. See chapter: “Fast starting the oven”, paragraph:

“Select cooking function”.

2. Example: it is 10 a.m: press button , the indicator blinks on the display and “- 0:00” appears.

3. Set the cooking time (e.g. 45 minutes) by turning the knob

!

: the set time appears on the display.

4. Press the button to confirm setting selection (e.g. 45 minutes): the indicator blinks and the display indicates the time of day plus the cooking time (e.g.: time 10:00 + 45 minutes = ore 10:45).

5. Select the time when you want cooking to end by turning the knob

!

(e.g.: 12:30).

6. Repeatedly press the button until the time of day (10:00) appears, or wait about 20 seconds for the setting to be automatically accepted.

Important notes:

To cancel any selection, turn knob to “0”.

Keeping button down for 5 seconds deactivates the audio signal associated with the manipulation of knobs and buttons.

Press button again for 5 seconds to reactivate. For safety reasons, the oven switches off automatically (except for the

“ ” and functions) after 4.5 hours of continuous operation.

The oven will turn on automatically at the end of cooking time minus cooking time

(e.g. 11:45): on the display turn on.

To verify the chosen temperature or grill level, turn knob

!

by one click.

To verify or change both the cooking time (e.g.: 45 min.) and the end of cooking time (e.g.: 12:39), press the button.

GB

Special functions:

(Extra browning and Heat Maintenance )

These functions are only available with the selection of cooking time or end of cooking time.

It is possible to select the two special functions simultaneously or separately.

Extra browning

Use this function to brown food (e.g.: a roast) while cooking. It is possible to choose between levels 1-2-3, where the number

1 represents minimum browning and the number 3 maximum browning.

This function can be selected only together with the functions .

Selecting the special Extra Browning function:

1. Set the cooking time or end of cooking time. See chapter “Fast starting the oven” and “Selecting the cooking function”.

2. Repeatedly press button until the symbol blinks on the display and “0” appears.

3. Turn the knob

!

to select the food's level of browning: 1, 2 or 3.

4. Press button twice or wait 20 seconds to get automatic confirmation of the setting.

Heat Maintenance

This function is used to maintain an oven temperature of 60°C at the end of cooking with automatic oven operation.

The “Heat Maintenance” function can be selected only together with the functions .

Selecting the special Heat Maintenance function:

1. Set the cooking time or end of cooking time. See chapter: “Fast starting the oven” and “Selecting the cooking function”

2. Repeatedly press button , the symbol blinks on the display and “-- C” appears on the display.

3. Turn the knob

!

to “60C”.

4. Press button or wait 20 seconds to get automatic confirmation of the setting.

Timer

The minute minder can only be used when the oven is not in use, and allows a maximum setting of 3 hours and 59 minutes.

To set the timer:

1. Leave knob on “0”. The display shows the time of the day.

2. Press button , the symbol blinks on the display.

3. Turn knob

!

clockwise. The set time blinks on the display. The appearance of the dash “-” indicates that the chosen time decreases until “0” is reached.

4. Press button or wait about 20 seconds to get automatic confirmation of the setting.

Once the set time has elapsed:

An acoustic signal is heard and

appears on the display.

press the button: The acoustic signal stops. The time of day appears again on the display.

Personalized cooking

This function can be selected in order to personalize cooking results. This function is not available in combination with the following functions: .

How to select the function:

To enable the function, turn the function selector knob to the lamp symbol.

Hold the confirmation button for 5 seconds. The display flashes and shows a preset value of “0”.

Turn the “change pre-set values” knob

!

and select a value between 0 and +2 and 0 and -2.

Press button to confirm.

Upon completion, the selection will be displayed for a few seconds.

The selected cooking level will be stored until any further changes.

Safety features

• When the oven door is open the display will show:

Close the door to proceed

PYRO-CLEAN (self-cleaning)

• During self-cleaning, an automatic “door lock” activates and the “ ” indicator lamp lights up on the display.

Selecting self-cleaning functions

Self-cleaning functions (depending on model):

“Pyro-clean” : this function has a pre-set duration of 3 hours and can be altered up to a minimum of 2 hours.

The display will show “ ”.

“Express” : this function has a pre-set duration of 1 hour 15 minutes. The display will show “ ”.

“6th Sense” : calculates the duration depending on grime level. The display will show “ selected only when the oven is cold; if the oven is still hot, “ ” will appear on the display.

”. This function can be

The display will only show “ ” once the oven has cooled sufficiently.

Turn knob to the chosen self-cleaning function (Pyro-clean, Express and 6th Sense), press the confirm button .

At that the end of self-cleaning, the display will show “ ”.

Selecting the duration of the pyro-clean function

1. Turn knob 1 to the “Pyro-clean” function

, will blink on the display .

2. Press the button until the indicator blinks on the display .

3. Turn knob

!

to select the required duration (the display will show the maximum pre-set duration of “ be altered up to a minimum of 2h.).

Press the button to confirm.

• During pyro-cleaning, the oven lamp may light up initially before switching off automatically.

Selecting the end of pyro-clean time with delayed start

1. Turn knob to the required function (Pyro-clean, Express, 6th Sense).

When selecting the “Pyro-clean” function, the duration must be set first

(see section titled “Selecting the duration of the pyro-clean function).

2. Press the button until the indicator blinks on the display .

3. Turn knob

!

to set the time you want the pyro-clean to finish.

4. Press the button to confirm.

Functions for Energy Consumption Saving:

The following functions (depending on the Model) are designed to minimize Energy Consumption.

While cooking, the oven can drive the motors (cooling and cavity motor) at different speeds and intervals.

”; this can

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement