IKEA 601 237 48 Oven Program Chart

PRODUCT DESCRIPTION SHEET
OVN 600 / OVN 900
DE AT GB FR NL BE ES PT
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Top
shelf
Bottom
shelf
IT
SE NO DK
FI
PL CZ SK HU RU
Control panel
Cooling fan1) (not visible)
Grill guard2)
Door lock3)
Catalyser
Top heating element guard
Grill heating element
Top heating element
Rear lamp
Oven fan
Bottom heating element (not visible)
Oven cool door
Oven Functions Table
Function
-
The cooling fan may continue running even after the oven is
During the pyrolysis function an automatic "door lock" device is
switched off. During Pyrolysis the fan runs faster than during
activated,
the indicator lights up at “
” on the programmer
cooking functions.
2)
It prevents direct contact with the grill. In any case, make sure not display, and the lamp remains off.
The oven door becomes hotter during pyrolysis, therefore it is
to touch the guard when the oven is on.
advisable to keep children away.
-
-
LAMP
-
• Switching on the oven light.
STATIC
80°C - 250°C
• For cooking meat, fish and poultry on one shelf.
• Preheat the oven to the required cooking temperature and introduce
the food.
• It is advisable to use the second or third shelf.
80°C - 250°C
• For cooking on up to two shelves.
• If necessary, switch the positions of the food to obtain more even
cooking.
• The oven does not have to be preheated (except for pizzas and buns).
80°C - 250°C
• For roasting meat and poultry.
• Fit the support on the second shelf and place the food on the spit, using
the special forks to hold the food firmly.
• Insert the spit all the way in the slot on the rear oven wall on the right
and rest it on the support.
• Pour a little water in the drip pan on the first shelf to reduce smoke and
spattering of fat.
• Remove the plastic handle before closing the door, remembering to refit
it before removing the food at the end of the cooking.
3)
GRILL
ACCESSORIES
Tray support:
Grill:
Baking tray:
Drip tray:
TURBO GRILL
Meat probe:
CONTROL PANEL
Description of Function
Oven Off
WITH FAN
1)
Adjustable
temperature
80°C - 250°C
•
•
•
•
For grilling large cuts of meat (roast beef, roasts).
Preheat the oven for 3 - 5 min.
The oven door must remain closed during cooking.
When cooking meat, pour a little water in the drip pan (on the bottom
shelf) to reduce smoke and spattering of fat.
• It is advisable to turn the meat during cooking.
DEFROSTING
Refer to the
programmer card
PYROLYSE
Refer to the
• Self-cleaning time can be set from a min. of
programmer sheet for
1h / 30 minutes to a max. of 3 hours.
further details
SPECIAL FUNCTION
• For thawing food at room temperature.
• Leave the food in the pack to prevent it from becoming dry.
80°C / Food-warmer • Food-warmer: for keeping food at a constant temperature of approx.
80°C.
250°C Pizza
• Pizza: ideal for baking pizzas and bread 250°C.
Important information:
During the self-clean cycle (pyrolysis) make sure to remove all the accessories supplied, to prevent any further increase in
the outside temperature of the door and to ensure more efficient cleaning of the bottom part of the oven.
See preheating times in cooking chart.
1
1.
2.
3.
4.
5.
Function selector knob
Programming button: (“set”)
Confirmation button (“ok”)
Buttons for changing time (“-” “+”)
Thermostat knob
5019 610 56207
2
3
4
5
Retractable knobs
• To use the knob, press it in the middle.
• The knob comes out.
• Turn it to the required position.
At the end of cooking, turn the knob to 0 and press in the
middle to return it to its original position.
COOKING TABLES
Preheating
(minutes)
Shelf
(from the
bottom)
Temperature
(°C)
Cooking time
(minutes)
12
2
200
90 - 110
14
2
200
90 - 110
Roast
(veal, pork, beef)
(1 kg)
12
2
200
100 - 110
14
2
200
100 - 110
Chicken, rabbit,
duck
12
2
200
80 - 90
14
2
200
80 - 90
Turkey
(3-4 kg)
12
1
200
160 - 180
FOOD
Function
FOOD
Lamb, mutton
M
E
A
T
14
1
200
160 - 180
12
2
200
100 - 130
14
2
200
100 - 130
(WHOLE)
(1-2 kg)
Gilthead, bass, tuna,
salmon, cod
12
2
200
50 - 60
12
2
180
50 - 60
(SLICES)
(1 kg)
Swordfish, tuna
12
2
200
50 - 60
12
3
180
50 - 60
12
2
200
60 - 70
12
2
180
60 - 70
12
2
200
50 - 60
Goose (2 kg)
F
I
S
H
V
E
G
E
T
A
B
L
E
P
I
Z
Z
A
B
R
E
A
D
C
A
K
E
S
P
A
S
T
R
I
E
S
Function
C
A
K
E
S
P
A
S
T
R
I
E
S
Temperature
(°C)
Cooking time
(minutes)
11
2
190
40 - 50
12
2
180
40 - 50
12
2
200
50 - 60
13
2
190
50 - 60
11
2
180
50 - 60
12
2
180
50 - 60
7
2
120
150 - 180
Savoury pies
Fruit pies
e.g. pineapple, peach
Meringues
-
2- 4
120
150 - 180
12
2
200
30 - 40
13
2
190
30 - 40
12
2
200
50 - 60
13
2
190
50 - 60
12
2
200
50 - 60
13
2
190
50 - 60
Vol-au-vents
E
T
C
Soufflés
Lasagna
COOKING TABLE FOR GRILL FUNCTION
FOOD
Baked potatoes
14
*
*
*
*
2
200
Function
Preheating
(minutes)
Shelf
(from the bottom)
Temperature
(°C)
Cooking time
(minutes)
50 - 60
Steak
16
3-4
225-250
40 - 50
16
3-4
225-250
30 - 40
2
250
15 - 20
Cutlets
2
250
15 - 20
Sausages
16
3-4
225-250
30 - 40
1-3
250
20 - 30
Chops
16
3-4
225-250
30 - 40
1-3
250
20 - 30
Chicken legs
12
3-4
200-225
40 - 50
10
2
170
40 - 50
Kebabs
12
3-4
200-225
40 - 50
11
2
170
40 - 50
Spare ribs
12
3-4
200-225
40 - 50
11
2
190
70 - 90
1/2 chicken
12
3
200-225
50 - 60
11
2
170
70 - 90
1/2 chicken
8
2
200-225
50 - 60
11
2
180
50 - 60
Whole chicken
8
2
200
60 - 70
12
2
180
50 - 60
Roast
(pork, beef)
8
2
200
70 - 80
12
2
200
50 - 60
Duck
8
2
200-210
80 - 90
Leg of lamb
8
2
200
70 - 80
Cakes (raised)
Pies
(with cheese)
Shelf
(from the
bottom)
Puffs
Stuffed tomatoes and peppers
Pizza - Bread
Preheating
(minutes)
M
E
A
T
Tarts
Strudel
E
T
C
12
2
180
50 - 60
9
2
160
30 - 40
Biscuits
10
2
150
30 - 40
F
I
S
H
* For preheating times, consult the user guide section “Special functions”.
NB:
Roast beef
9
2
225-250
50 - 60
Baked potatoes
8
3
200-210
50 - 60
Fish (gilthead, trout)
7
2
190-200
50 - 60
Fish (slices)
12
3-4
200-225
30 - 40
GRILL, turn meat halfway through cooking.
GB
INSTRUCTIONS FOR USING THE ELECTRONIC TIMER NUTID
Electronic timer
1. Turn knob to “0”
The time of day appears again on the display.
Selecting the end of cooking time
1
!
"
#
2 3
4
5
Displays
Function selector knob
Setting button: (“set”)
Confirmation button (“ok”)
Buttons for changing time (“-” “+”)
Thermostat knob
Starting the oven
When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates
“12.00”.
Selecting and changing the clock time:
1. Press “set”. The time of day flashes on the display.
2. Press button “-” or “+” to set the hour.
3. Press “set” and “-” or “+” to set the minutes.
4. Press “ok” to confirm.
To change the time:
Press and hold “ok” for 3 seconds. until the time flashes on the display. Repeat the steps described above.
Select cooking function:
1. Turn knob to the chosen function.
2. Turn knob # to select the temperature.
(NB: during the “defrost” function, the temperature shown on the display is for guidance only and does not mean the oven
is heating up: the oven temperature remains comparable to room temperature, as per the description of the function in the
product description sheet).
3. Press “ok” to confirm; the oven will switch on. The indicator next to
switches on.
To change the temperature:
1. Turn knob # and select the desired temperature.
Important notes:
To cancel any selection, turn knob to “0”. Alternatively, press “set” to switch the oven off, maintaining the previously
selected functions.
Selecting the cooking time:
Select the cooking time (available with any function, except for the special functions) to turn the oven on for a specified period
of time. At the end of the specified time the oven will switch off automatically. The maximum programmed cooking time is 6
hours.
1. Set the function and the temperature (see chapter: “Selecting the cooking function”) up to point 2 without confirming by
pressing “ok”.
2. Press “set” (the indicator
on the display lights up next to the cooking time symbol
) and, within 8 minutes, select the
desired cooking time using buttons “-” o “+”.
3. Confirm the selection by pressing “ok”; the oven switches on and the display shows the residual cooking time.
4. To change the previous temperature setting, turn knob #.
To return to the residual cooking time, wait 5 seconds.
Appearance of
on the display:
Once the set time has elapsed, an acoustic signal is heard and
appears on the display.
The oven will switch off automatically.
To change the cooking time, use button “-” or “-” “+”. Return to point 3 chapter “Selecting the cooking time”.
Using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and
59 minutes.
1. Proceed as described in points 1 and 2 chapter “Selecting the cooking time”
2. Press “set” to set the end of cooking time: the indicator next to the symbol
lights up
.
3. Set the end of cooking time using button “-” or “-” “+”.
4. Press “ok” to confirm the end of cooking time.
The oven will turn on automatically at the end of cooking time minus cooking time: the indicators on the display above the
symbols
will light up.
Special functions
,
Turn knob to function
lights up next to the symbol
.
Keep warm
This maintains a constant temperature of 80°C in the oven.
1. Turn knob # to the symbol
2. Press “ok” to confirm.
3. The indicator next to
on the control panel switches off when a temperature of 80°C is reached, a factory-set time of 5
minutes flashes on the display and an acoustic signal sounds.
4. Place the food in the oven.
5. To change the preset time, use button “+” or “+” “-”.
6. Press “ok” to confirm.
7. Once the set time has elapsed, the oven switches off, an acoustic signal is heard and
appears on the display.
Pizza
This operates at a fixed temperature of 250°C and is ideal for baking pizzas.
1. Turn knob # to the symbol
.
2. Press “ok” to confirm.
3. The indicator next to
on the control panel switches off when a temperature of 250°C is reached, a factory-set time of
12 minutes flashes on the display and an acoustic signal is heard.
4. Place the food in the oven.
5. To change the preset time, use button “+” or “+” “-”.
6. Press “ok” to confirm.
7. Once the set time has elapsed, the oven switches off, an acoustic signal is heard and
appears on the display.
Pyrolysis function
1. Turn knob to the self-cleaning Pyrolysis function,
and for 2 seconds the display shows clean Cln, the selector
automatically sets a minimum time of 1:30.
2. Use buttons “+” “-”, to change duration of the self-clean cycle. The maximum programme time is 3 hours.
The end of pyrolysis time can be set as follows:
1. press “set” to set the end of pyrolysis time.
The indicator
next to the symbol
lights up.
2. Set the end of pyrolysis time using buttons “+” “-”.
3. Press “ok” to confirm the end of pyrolysis time.
The oven will automatically turn on at the end of pyrolysis time minus pyrolysis time (set previously).
The indicators
above the symbols
light up.
4. To increase pyrolysis time, press “set” and then set the new pyrolysis time using the button “+”.
5. Confirm by pressing the OK button”.
When the set time has elapsed, an acoustic signal is heard and the display shows
.
6. Press “ok” to stop the acoustic signal.
7. Turn the knob to “0”, the time of day appears again on the display.
GB
INSTRUCTIONS FOR USING THE ELECTRONIC TIMER NUTID
Timer
The timer can only be set when the oven is not in use and allows a maximum setting of 6 hours.
To set the timer:
1. Leave knob at “0”. The display shows the time of the day.
2. Press “set”. The indicator next to the symbol
lights up
.
Use buttons “-” or “+” to set the desired time.
3. Press “ok” to confirm the selection.
Once the set time has elapsed:
An acoustic signal sounds and flashes on the display
.
Press “ok”: The acoustic signal stops. The time of day appears again on the display.
Childproof lock
:
1. With knobs and # set to “0”, press buttons “-” and “+” at the same time for 3 sec.
NB:
Activation of the LOCK function is signalled by an acoustic signal, whereas the symbol
will appear on the display.
When set, the display will continue to show the time.
1. The oven functions will not operate while the childproof lock is activated.
2. To deactivate the lock, repeat the sequence described in point 1.

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project