Whirlpool AKZ 224/AV Oven Program Chart

Add to my manuals
4 Pages

advertisement

Whirlpool AKZ 224/AV Oven Program Chart | Manualzz

-

AKZ 224

DE AT FR NL BE

PRODUCT DESCRIPTION SHEET

Top shelf

Bottom shelf

Baking tray:

1.

Control panel

2.

Cooling fan (not visible).

The fan only switches on when the oven and/or cooktop has reached a certain temperature, and may continue even after the appliance has been turned off, for a few minutes.

3.

Upper heating element (can be lowered)

4.

Rear oven lamp

5.

Round heating element

6.

Fan

7.

Lower heating element (hidden)

8.

Oven cool door

ACCESSORIES

Drip tray:

Wire Shelf:

CONTROL PANEL

1. Control knob for front left hotplate

!

0 1 ...10

*.

2. Control knob for rear left hotplate

0 1 ...10

*

3. ON/OFF - Function Selector Knob

4. Button to select and confirm programmes

5. Pre-set values modification knob (temperature, time, levels)

6. Control knob for rear right hotplate

0 1 ...10

*.

7. Control knob for front right hotplate

0 1 ...10

*.

" # $ % &

8. Cooktop ON indicator light

* The multizone function can only be switched on for those hotplates of the cooktop equipped with double or triple zone function.

(See hotplate functions table)

Retractable knobs

• To use this type of knob, press it in the middle.

• The knob comes out.

• Turn it to the required position.

Once cooking is over, turn the knob to “0” and press it again to restore it to its original position.

5019 310 56600

Oven function chart

Function

-

Oven OFF

LAMP

MLTF (Heat

Maintenance)

STATIC

PASTRY/FAN

FAN/

THERMOVENTILATED

TURBOFAN

GRILL

TURBO GRILL

PIZZA/BREAD

BOOSTER

Preset temperature

Temperature range

-

-

35°C - 60°C

200°C

175°C

160°C

160°C

3

3

-

200°C

Description of function

To switch on the oven light

50°C - 250°C

50°C - 250°C

50°C - 250°C

50°C - 250°C

-

-

-

P1- 300°C

P2- 220°C

50°C - 250°C

• To maintain a constant temperature inside the oven.

• 35°C: to raise pasta, bread and pizza.

• 60°C: to keep cooked food warm.

• Ideally the first shelf level should be used.

• To cook meat, fish and chicken on the same level.

• Preheat the oven to the required cooking temperature and place food in the oven as soon as all the thermostat indicators are on.

• Ideally, the second or third shelf level should be used.

• To cook on up to two different shelf levels.

• If necessary, switch the positions of the dishes to cook food more evenly.

• To cook (without preheating) foods that require the same cooking temperature on one or more levels (e.g.: fish, vegetables, sweets), without transferring odours from one foodstuff to the other.

• To cook on one level (e.g.: fruit, cakes, timbales, vegetables, pizza, poultry).

• To grill steak, kebabs and sausages, to cook vegetables au gratin and to toast bread.

• The function allows various settings (1 min. - max. 5.).

• Preheat the oven for 3 - 5 min.

• The oven door must be kept closed during the cooking cycle.

• When cooking meat, pour a little water into the drip tray (on the bottom level) to reduce smoke and fat spatters.

• Ideally the meat should be turned during cooking.

• To grill large joints of meat (roast beef and other roast meats).

• The function allows various settings (1 min. - max. 5.).

• Preheat the oven for 3 - 5 min.

• The oven door must be kept closed during the cooking cycle.

• When cooking meat, pour a little water into the drip tray (on the bottom level) to reduce smoke and fat spatters.

• Ideally the meat should be turned during cooking.

• To bake pizza, bread, focaccia.

• You will find a recipe for each programme in the recipe book provided.

• To preheat the oven rapidly.

• As the temperature increases, the thermostat

indicators will light up in sequence.

• The booster function cuts out automatically when the programmed temperature is reached. The acoustic signal will sound and the appliance switches to the STATIC cooking function.

COOKING TABLES

FOOD Function Pre heating

Level

(from the bottom)

Browning level

Temperature

(°C)

Cooking time

(minutes)

X 2 2 200 95 - 110

MEAT

Lamb, Kid, Mutton

X 3 2 200 100 - 110

X 2 200 100 - 110

X 2 2 200 95 - 110

Roast

(Veal, Pork, Beef)

(kg. 1)

X

X

3

2

3

-

200

200

100 - 110

90 - 100

Chicken, Rabbit,

Duck

Turkey

( 4-6kg) + 3 level

Goose (2 Kg)

FISH (WHOLE)

(1-2 kg)

Gilt-head, Bass,

Tuna,

Salmon, Cod

FISH (CUTLETS)

(1 kg

Sword Fish, Tuna

VEGETABLES

Stuffed peppers and tomatoes

Roast potatoes

SWEETS,

PASTRIES, ETC.

Leavened cakes

Filled pies

(with cheese)

Tarts

Apple strudel

Biscuits

Choux buns

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

2

2

2

2

1 - 3

2

2

1

2

2

2

2

2

1 - 3

2

2

1 - 3

2

2

2

2

2

2

3

2

2

3

3

2

1

2

1

1

2

2

1

2

2

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3

3

-

-

-

1

-

2

2

-

3

3

-

3

-

1

-

3

3

3

190

180

180

200

200

200

190

180

180

190

180

180

170

200

200

180

180

180

220

200

200

220

200

190

200

200

190

200

200

210

210

200

200

200

200

190

200

200

40 - 50

40 - 50

40 - 50

50 - 55

50 - 55

50 - 55

40 - 50

40 - 50

40 - 50

80 - 90

70 - 80

80 - 90

20 - 30

20 - 30

20 - 30

35 - 45

35 - 45

40 - 50

45 - 55

50 - 60

40 - 50

40 - 50

40 - 50

50 - 60

50 - 60

50 - 60

50 - 60

50 - 60

80 - 90

80 - 90

85 - 95

160 - 180

160 - 180

180 - 190

100 - 130

100 - 130

100 - 130

45 - 55

FOOD

Savoury pies

Lasagna

Filled fruit pies e.g. Pineapple,

Peach

Function Pre heating

Level

(from the bottom)

Browning level

Temperature

(°C)

Cooking time

(minutes)

X 2 200 40 - 50

X

X

2

2

-

-

190

190

40 - 50

40 - 50

X

X

X

X

2

2

2

2

1

1

-

-

200

200

200

190

45 - 60

45 - 60

45 - 60

50 - 60

Meringues

Vol-au-vents

X

X

-

-

X

X

X

1 - 3

2

2

1 - 3

2

2

2

-

-

-

-

-

-

-

190

190

120

120

120

200

190

40 - 50

40 - 50

120 - 150

120 - 150

120 - 150

35 - 45

35 - 45

Soufflés X

X

X

X

2

2

2

2

-

-

-

-

190

200

190

190

35 - 45

40 - 50

45 - 55

45 - 55

COOKING TABLE FOR GRILL

FUNCTION

FOOD Function Pre heating

Level

(from the bottom)

Power level

Steak X 4 5

Cutlets

Sausages

Chops

Fish (steaks)

Chicken legs

Kebabs

Spare ribs

1/2 chicken

1/2 chicken

Whole chicken

Roast

(pork, beef)

Duck

Leg of lamb

X

X

X

X

X

X

X

X

X

X

X

X

X

4

3 - 4

4

3 - 4

3 - 4

3 - 4

3 - 4

3

3

3

2

2

3

5

5

5

5

5

5

5

5

5

5

5

5

5

60 - 70

70 - 80

70 - 80

Roast beef

Roast potatoes

Fish (gilthead, trout)

X

X

X

3

3

3

5

5

5

50 - 60

50 - 60

50 - 60

N.B.: When cooking meat with Fan or Conventional functions, it is advisable to add the Browning function, using shelf 1 to 3.

Cooking times and temperatures are for guidance only.

Cooking time

(minutes)

35 - 45

30 - 40

30 - 40

35 - 45

35 - 45

40 - 50

40 - 50

35 - 45

45 - 55

45 - 55

60 - 70

Cooktop Functions Table (depending on model)

Function Description of function

HEAT

MAINTENANCE

To allow dough to rise, to soften butter taken from the fridge, to keep baby bottles or food warm, also for making yoghurt, melting chocolate, etc.

This function is only available when the residual heat indicator is on. For this function, make sure the residual heat indicator of the desired hotplate is on. Turn the knob to . To deselect the function, change the position of the knob.

To maintain a constant temperature of 60° until the end of cooking. To select this function, turn the knob to .

This function is used to bring water to the boil rapidly and remains on for a preset time. At the end of the preset time, the cooktop automatically returns to the maximum power setting.

This function can be selected even during cooking. Important: Before selecting this function, make sure the pot is positioned on the selected hotplate in order to avoid any damage to the cooktop surface. The stated performance values for this function are those guaranteed for all glass ceramic cooktops. For this function, place the pot on the selected hotplate and turn the knob to . To deselect, change the position of the knob.

The multizone symbol, featured on the knobs, can only be switched on for those hotplates of the cooktop equipped with double or triple zone function. These functions extend the heating area of the cooktop in order to allow the use of large, oval or rectangular pots or cooking receptacles. To switch on the dual zone (if available), turn the knob to and wait until the residual heat indicator for the hotplate begins to flash. To switch on the triple zone function (if available), wait until the LED begins flashing quickly. Select the power setting required by turning the knob anti-clockwise. The residual heat indicator remains on to indicate that the cooktop is in use. To deselect, turn the knob to "0".

HOW TO OPERATE THE COOKTOP

The oven control panel features 4 adjustable knobs for cooktop operation. The cooktop control knobs are marked with a numerical scale corresponding to different power settings, and a series of function symbols.

• Turn the control knob of the relevant hotplate clockwise to the desired power setting (see the instructions supplied with the cooktop).

GB

Electronic programmer

Temperature increase indicators

GUIDE TO USING THE ELECTRONIC PROGRAMMER

Display

Heat

Maintenance

Operating the oven using the electronic programmer

Selecting the cooking time:

Select the cooking time (available with any function) to turn the oven on for a specified period of time. At the end of the specified time the oven will switch off automatically. The maximum programmed cooking time is 3 hours and 59 minutes.

1. Set the function and temperature or grill level (see chapter: “Fast starting the oven” and

“Selecting the cooking function”).

Extra browning

2. Repeatedly press the button , the indicator blinks on the display and “-0:00” appears.

!

ON/OFF - Function Selector Knob

Button to select and confirm programmes

!

Knob to change preprogrammed values

(temperature, time, levels)

Cooking time End of cooking time

Clock

Fast starting the oven

When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates “

To switch on the oven:

”.

1. Turn knob to “0”.

2. press the button. The display shows “--:--”.

Selecting and changing the clock time:

1. Press the button three times.

2. Turn the knob within 15 seconds to set the time of day. The time of day flashes on the display.

3. Press the button or wait 15 seconds to get automatic confirmation of the setting.

To modify the time of the day:

Press the button twice blinks on the display. Repeat the steps described above.

Select cooking function:

1. Turn knob to the chosen function: the preset temperature or grill level will flash on the display.

2. If this value is right, press the button to confirm or wait 10 seconds to have the setting accepted automatically.

To change the pre-set temperature or grill level:

1. Turn knob

!

: the temperature (or grill level when knob is on the selection blinks on the display.

2. Press button to confirm or else wait about 10 seconds to have the setting accepted automatically.

)

The oven begins operation about 5 seconds after confirmation: the temperature increase indicators on the display turn on sequentially, indicating the temperature increase on the graduated scale °C .

Notes:

The set values can be changed even during cooking.

At the end of cooking:

Switch off the oven by turning knob back to “0”. The time of day appears again on the display.

3. Turn knob

!

clockwise: the selected time blinks on the display. The appearance of the dash

“-” indicates that the chosen time decreases until “0” is reached.

4. The oven automatically starts cooking 20 seconds after the setting and the time remaining until the end of cooking appears on the display.

Note: To view or change the previously set temperature, turn the knob

!

by one click. To return to the display of the remaining time, wait 20 seconds or press the button .

To use the special functions Extra browning and Heat Maintenance , consult the chapter

“Special functions”.

To change the pre-set temperature or grill level:

Turn the knob

!

and confirm by pressing the button or wait about 10 seconds for automatic acceptance of the setting.

Appearance of on the display:

When the pre-set time (end of cooking) runs out, appears on the display and an acoustic signal sounds for 15 minutes in intervals. The oven switches off automatically and the oven's interior lamp stay on for 25 min.

1. Press button to stop the acoustic signal.

2. Turn knob back to “0”. The lamp turns off.

The time of day appears again on the display.

Important notes:

To cancel any selection made, turn knob to “0”.

Keeping button down for 5 seconds deactivates the audio signal associated with the manipulation of knobs and buttons.

Press button again for 5 seconds to reactivate. For safety reasons, the oven switches off automatically (except for the

“ ” and functions) after 4.5 hours of continuous operation.

Setting end of cooking time

By using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and 59 minutes.

1. Set the function and temperature or grill level. See chapter: “Fast starting the oven”, paragraph:

“Select cooking function”.

2. Example: it is 10 a.m.: press button , the indicator blinks on the display and “- 0:00” appears.

3. Set the cooking time (e.g. 45 minutes) by turning the knob

!

: the set time appears on the display.

4. Press the button to confirm setting selection (e.g. 45 minutes): the indicator blinks and the display indicates the time of day plus the cooking time (e.g.: time 10:00 + 45 minutes = ore

10:45).

5. Select the time when you want cooking to end by turning the knob

!

(e.g.: 12:30).

6. Repeatedly press the button until the time of day (10:00) appears, or wait about 20 seconds for the setting to be automatically accepted.

The oven will turn on automatically at the end of cooking time minus cooking time

(e.g. 11:45): on the display turn on.

To verify the chosen temperature or grill level, turn knob

!

by one click.

To verify or change both the cooking time (e.g. 45 min.) and the end of cooking time (e.g. 12:30), press the button .

Special functions:

(Extra browning and Heat Maintenance )

These functions are only available with the selection of cooking time or end of cooking time.

It is possible to select the two special functions simultaneously or separately.

Extra browning

This function is used for browning food (e.g. roast) during cooking. It is possible to choose between levels 1-2-3, where the number 1 represents minimum browning and the number 3 maximum browning.

This function can be selected only together with the functions .

Selecting the special Extra Browning function:

1. Set the cooking time or end of cooking time. See “Fast starting the oven” and “Selecting the cooking function”.

2. Repeatedly press button until the symbol blinks on the display and “0” appears.

3. Turn the knob

!

to select the food's level of browning: 1, 2 or 3.

4. Press button twice or wait 20 seconds to get automatic confirmation of the setting.

Heat Maintenance

This function is used to maintain an oven temperature of 60°C at the end of cooking with automatic oven operation.

The “Heat Maintenance” function can be selected only together with the functions .

Selecting the special Heat Maintenance function:

1. Set the cooking time or end of cooking time. See chapter: “Fast starting the oven” and “Selecting the cooking function”

2. Repeatedly press button , the symbol blinks on the display and “-- C” appears on the display.

3. Turn the knob

!

to “60C”.

4. Press button or wait 20 seconds to get automatic confirmation of the setting.

Minute minder

The minute minder can only be used when the oven is not in use, and allows a maximum setting of 3 hours and 59 minutes.

To set the minute minder:

1. Leave knob on “0”. The display shows the time of the day.

2. Press button , the symbol blinks on the display.

3. Turn knob

!

clockwise. The set time blinks on the display. The appearance of the dash “-” indicates that the chosen time decreases until “0” is reached.

4. Press button or wait about 20 seconds to get automatic confirmation of the setting.

Once the set time has elapsed:

An acoustic signal is heard and appears on the display.

Press the button : The acoustic signal stops. The time of day appears again on the display.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement