Trilennium

®

3000 Multi-Point

Locking System

Replacement Instructions

TOOLS REQUIRED:

• Screwdriver or Drill

KIT INCLUDES:

• Trilennium ® 3000 Multi-Point Lock

• Mounting Screws

STEP 1: REMOVE THE EXISTING LOCK, IF PRESENT, FROM THE ACTIVE DOOR PANEL

Note: You must first remove the handle or grip lever before removing the lock.

* 6/8 Lock shown- longer locks will have more screws.

Phillips

Head

Screws

Loosen the screws that secure the lock on the panel and remove the existing lock. Clear out any debris that may be in the exposed channel.

You do not need to remove the torxhead screws.

!

screws, as without the securing screws the lock may fall out.

Phillips

Head

Screws

SKU : BD-INST-TRIL3000

Revised : 03.14.2017

8817 West Market Street, Colfax, NC 27235

800.334.2006 Fax: 336.668.4478

www.enduraproducts.com

1

STEP 2: INSTALL NEW LOCK

Place the new lock face out into the channel.

Ensure the lock faceplate is flush with the panel. Screw the lock in using the screws provided.

NOTES:

• Check that the latch bevel faces the strikes on the jamb and is the same as the one that you are removing

• Confirm that the panic release function is on the interior side of the lock.

• You do not need to remove the torxhead screws.

2