Hisense LCD3204, LCD3204EU User's Manual

Add to My manuals
22 Pages

advertisement

Hisense LCD3204, LCD3204EU User's Manual | Manualzz

R

81cm LCD COLOUR TV

LCD3204EU

USER'S MANUAL

Part No: IES050409

WELCOME TO THE PERFECT VIEW WORLD OF HISENSE LCD TV

Dear customer,

Thank you for choosing this LCD Colour TV. We expect our product and service will comfort you for long. This manual is to guide you to set up and operate your TV as quickly as possible. Please read all the safety and operation instructions carefully before you begin and then follow what the handbook tells.

SAFETY CLASS

This is an IEC safety class I product and must be grounded for safety.

Important safeguard

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

Preparation for your new TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Selecting a location for the TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Learning about your TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Connecting your TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Connecting to A / V equipments

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Connecting to a computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Connecting to an antenna

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Using the remote control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Preparing the remote control for use

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Learning about the remote control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Using the TV features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Understanding the TV features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Basic operations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Using the CHANNEL menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Using the PICTURE menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Using the AUDIO SETTING menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Using the PIP menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Using the MENU LOCK SETTING menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Using the GENERAL SETTING menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Using the PC menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Teletext operations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Appendix

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Cleaning and Care

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

Design and specifications are subject to change without notice.

- 1 -

FIRE AND SHOCK PRECAUTIONS

Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free from foreign objects, such as hairpins, nails, paper, etc. Do not build the set into a bookcase or other enclosures in which it would be poorly ventilated. Do not place it on carpet or a bed as low ventilation boles could become obstructed.

Do not set liquids, including flower vases and vessels filled with chemicals or water etc., On top of the unit as liquid could get inside the unit. If a hazardous object falls inside the TV set, unplug it immediately and call a qualified technician for removal.

When placing or moving the TV set, take care to insure that the power cord is fitted into the allocated slot.

To avoid damage to the power cord, never allow heavy objects such as the TV set itself to be placed on

the power cord. Keep cord away from radiating appliances. Do not allow cord to become knotted or

tangled. Do not lengthen the cord. When removing the power plug from the socket, always hold onto the

plug, never pull by the cord.

This TV set shall be connected to a main socket outlet with a protective earthing contaction

The main plug and main switch should be remain readily operable after installation

No naked flame sources,such as lighted candles, should be placed on the apparatus

Minimum distances around the apparatus for sufficient ventilation

The use of apparatus in moderate climates

WARNING

Do not remove the back cover of the TV set. Accidental contact with high voltage components could result in electric shock. When internal adjustment is necessary, please contact your distributor.

If your set produces sound but no picture, or it emits smoke or produces a strange sound or smell, continue operation is dangerous. Immediately turn off power and remove the power plug from the socket and contact your distributor.

During vacation or other occasions when you will not be using the set for an extended period, remove the power plug from the socket.

The symbol of the dustbin barred means that this apparatus cannot be put at the rebus with not sorted waste domestic running.

It is interdict to throw with not sorted waste domestic running, of deposited on the public thoroughfare or at any other place not envisaged to this end. This apparatus contains substances being able to be harmful for the environment.

- 2 -

OSD language Settings

When you start using your set for the first time, the Plug & play menu will be displayed on the screen as shown on the right.

1.Press the [CH+ or CH-] button to

select the OSD language.

2.Press the [VOL+ or VOL-] button to

select the language that you want

to use.

Plug & Play

OSD language

Teletext Language

Colour system

Sound system

English

West Europe

SECAM

AUTO

Auto search

Notes: The Plug & Play menu is only displayed once when you

turn on the TV. If you want to select this menu, please follow the

instructions below:

1).Press the [Menu] button to enter

the main menu.

2).Press the [VOL+ or VOL-] button

to slect the item General

settings as shown on the right.

3).Press the [CH+ or CH-] button to

select the Plug & play and press

the [VOL+ ] button to select this

function.

4).Turn on your TV again, the Plug &

Play menu will be displayed on the

Screen.

General settings

Colour system

Noise reduce

Deinterlacer

Factory reset

Sleep timer

Plug & Play

Language english

Preparation for Using your new TV

Selecting a location for the TV

1)Place TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.

2)Place TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause

overheating, which may damage the TV.

NOTE: Please contact local dealer for wall mounting.

Learning about your TV

You can operate your TV by using the buttons on the front panel or the remote control. The terminals on the back panel provide all the connections you will need to connect other equipment to your TV.

Front Controls

Power Switch (ON/OFF)

Power indicator

Remote Sensing Window

Menu button

Source select

Volume up / cursor right

3

Volume down / cursor left

Channel up / cursor up

Channel down / cursor down

Power button (standby)

MENU

SOURCE

VOL

CH

6

7

8

9

10

- 3 -

Preparation for Using your new TV

C1

11

12

C1

C2

C2

AC INPUT

24

AUDIO INPUT

[COMPONENT]

AUDIO INPUT

[VGA DV]

20 21 22 23

11

12

13

14

15

16

AV input

AV output

Scart1 connector

Scart2 connector

S-VIDEO input

COMPONENT VIDEO input

17 COMPONENT AUDIO input

18 PC AUDIO input

19

Earphone output

20

21

22

23

24

Antenna input

VGA input

DVI input

RS232C input

AC Power Socket

Note: The above figures are for reference only, please refer to the actual units to determine their appearance.

- 4 -

1

1

Preparation for Using your new TV

1

Connecting your TV

Caution: Do not plug the TV in until you have finished connecting all of your equipment.

Connecting to A/V equipments

To enjoy its multimedia features, you can connect your TV to A/V equipments such as VCR, DVD, STB, Satellite receiver, Camcorder, Audio amplifier etc., and select signal sources using your remote control. Connect the devices as shown below.

C1

INPUT

VIDEO AUDIO/L AUDIO/R

OUTPUT

SCART1

[VIDEO IN/OUT(CANEL+) RGB IN]

SCART2

[VIDEO IN/OUT Y/C/N]

S-VIDEO

INPUT

C2

COMPONENT VIDEO

INPUT

B R

L

R

L

R

EARPHONE

ANT

75

B B R R

COMPONENT

ANT 75

HDTV STB

1

P B P R

B

P B

C R

P R

VCD, DVD

LANGUAGE ENGLISH

Notes:The input signal of YP

B

P

R

/YC

B

C

R

mode can be the following format : 480P/60Hz,480I/60Hz,576P/50Hz,

576I/50Hz, 720P/50Hz, 720P/60Hz,1080I/50Hz, 1080I/60Hz

Connecting to A Computer

You can use your TV as a monitor/speakers for your computer by connecting through its 15pin standard RGB

interface and PC audio interface. Connect the devices as shown below.

- 5-

Preparation for Using your new TV

PC/NB RGB line

C2

S-VIDEO

INPUT

COMPONENT VIDEO

INPUT

B R

L

R

L

R

EARPHONE

OUTPUT

ANT

75

To speaker

To VGA

Audio line

NOTE: PC mode support resolution: VGA, SVGA, XGA, SXGA.

Connecting to an antenna

To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna

(not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna must be used. The exact type and location of the antenna will depend on your particular area. Consult your

local dealer or service personnel for best advice. If you are a subscriber of your local CATV net, the outdoor or indoor antenna is not needed. Connect the equipments as the following figure.

Plug(not supplied)

COAXIAL CABLE (75

W

)

TWIN-LEAD FEEDER(300

W

)

The signal comes from:

An outdoor antenna

An indoor antenna

CATV net

Adaptor (not supplied)

Loosen the screw Insert the feeder in Tighten the screw

ANT 75

ANTENNA SOCKET

- 6-

Using the remote control

Preparing the remote control for use

Installing the remote control batteries

1. Open the battery cover on the back of the remote control.

2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment.

3. Close the battery cover.

Note:

1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire.

2.Do not mix battery types or combine used batteries with new ones.

3.Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

4.If you do not intend to use the remote control for a long time, remove the batteries.

5.The effective range of remote control is suggested in the figure.

30

3m 8m

30

3m

- 7-

Using the remote control

Learning about the remote control

Direct

Channel Number : channel selection

: Return to previous channel

: Select picture mode

: Channel up

: Volume down

: Channel down

: Select sound mode

: Freeze picture

Zoom : Ajust zoom ration

: Switch to TV,SCART1,

AVand SCART2 mode

: Component mode

: Not used

: Power on/off

Video

YPbPr

Still

S-Video

YCbCr

PC

Time

Text

FAST TEXT buttons

: Display current input

TEXT : Teletext mode

: Volume up

: Call up the main menu

: Make the volume to zero

: S-VIDEO mode

: Mono/Stereo

: VGA/DVI mode

Time : Adjust the sleep time

HYDFSR-EP209C1

- 8-

Using the TV features

Understanding the TV features

Multimedia - TV receiver, Video monitor and PC display, all in one.

Wider viewing angle, 16:9 display - 176 viewing angle at typical value

Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective

of magnetic or geomagnetic effect.

200 channels Memory

Sleep timer

Teletext with 252 pages memory

NICAM/A2 Stereo

Dual SCART interface

Multi-language OSD

Basic Operations

Power ON/OFF

1) Connect the TV to power outlet and turn on the power switch, the power

indicator will be red and then turn blue. Several seconds later, TV picture

will display on the screen.

2) Press the Power button on the front control or on the remote control to make

the TV on standby. Press the power switch to turn off power.

3) If you decide to shut off the TV for a long time, it is recommended that you unplug the power from the outlet.

POWER

INDICATOR

MENU

Source

VOL

CH

Signal source selection POWER BUTTON

(STANDBY)

Press [CH+/CH- ] button to select TV input; press the [VIDEO] button to select TV ,scart1, scart2

and AV input in turn; press the [S-VIDEO] button to select S-VIDEO input ;press the [ YP

B

P

R

]

button to select YP

B

P

R

input; press the [PC] button to select VGA or DVI input.

NOTE: 1).When you press the [YC C ] button, will display

ABORT KEY

in screen

2).

In Video channel Of scart1 ,if you want quit from scart1 , you can press the [VIDEO] button to select

B R

Select channels by [ CH+/CH]

You can also use [CH+ / CH-] to select channels. [CH+] i ndicates channel number increase; [CH-] indicates channel number decrease.

- 9-

Using the TV features

Select channels by numbers

To select a channel : Press the channel numbers in series to select channel directly.

For example, to select channel 120, Press the button 1, and 1_ _ will display on the top right corner of the screen,

then press the button 2, 12_ will display, press the button zero, you can enjoy the program of channel 120.

NOTE:

1) When you changing the channel, the sound mode will be displayed below the channel number. There are 3

sound states in this TV. If the sound is mono, the graphics is , If the sound is stereo, the graphics is

If the sound is NICAM dual I/II, the graphics is .

There are two symbol at right of the sound state graphics,

Which indicate preset of picture system and sound system.

2) When you changing the channel, the OSD will display current sound mode. You can change to difference sound

mode by pressing the

I/II

button to change to Stereo, NICAM or Dual sound.

3) When you select the 0 channel, the video source in SCART1 will be selected. And then you press the VIDEO

button ,It will return TV source.

Adjust Volume

When menu OSD is not on TV screen, press [VOL+ or VOL-] to adjust the volume.

Use [Recall] button

By pressing [ Recall ] button will allow you to toggle between current and previous channel.

Display channel number

By pressing [Display] button will you to view current source information.

Select picture modes

By pressing [ P. mode ] button will allows you to select between three difference picture modes preset setting(SOFT, BRIGHT, NORMAL) and a USER setting that you can adjust to your desired.

Select sound modes

By pressing [ S. Mode ] button will allows you to select between three difference sound modes preset setting(MUSIC, SPEECH, NORMAL) and a USER setting that you can adjust to you desired.

Use [Still] button

Press [Still] button to snapshot the present viewing picture, and press again to return to normal.

Use [ Zoom ] button

By pressing [Zoom] button you will able to change the screen aspect ratio between 16:9 or 4:3.

Mute function

By pressing [Mute] button will allow you to mute the sound temporary, press again to resume sound.

NORMAL

USER

SOFT

BRIGHT

SPEECH

NORMAL

USER

MUSIC

- 10-

Using the TV features

Using the CHANNEL menu

PROGRAM

1) Press [MENU] button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item CHANNEL.

3) Press [CH+ or CH-] button to select PROGRAM.

4) Press [VOL+ or VOL-] button to select the channel.

Sound system

You can set sound system.

1) Press [MENU] button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item CHANNEL.

3) Press [CH+ or CH-] button to select sound system, and press

[VOL+] button to enter sound system.

4) Press [VOL+ ] I,

AUTO-SEARCH

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item CHANNEL.

3) Press [CH+ or CH-] button to select AUTO SEARCH.

4) Press [ VOL+] button to start auto searching.

MANUAL-SEARCH

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item CHANNEL.

3) Press [CH+ or CH-] button to select MANUAL SEARCH.

4) Press [ VOL+ or VOL-] button to start MANUAL searching.

FINE TUNE

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item CHANNEL.

3) Press [CH+ or CH-] button to select FINE TUNE.

4) Press [ VOL+ or VOL-] button to start FINE searching.

CHANNEL

PROGRAM

SOUND SYSTEM

AUTO SEARCH

MANUAL SEARCH

FINE TUNE

SKIP

CHANNEL EDIT

SKIP

1) Press [MENU] button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item CHANNEL.

3) Press [CH+ or CH-] button to select SKIP.

4) Press [VOL+] button to skip or un-skip the current channel.

CHANNEL EDIT

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item CHANNEL.

3) Press [CH+ or CH-] button to select CHANNEL EDIT.

4) Press [ VOL+] button to start CHANNEL EDIT.

5) You can swap or copy a program by using the SWAP or COPY function from the CHANNEL EDIT menu.

11-

Using the TV features

Using the PICTURE menu

PICTURE PARAMETERS

1) Press [MENU] button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item PICTURE

PARAMETERS.

3) Press [CH+ or CH-] button to select the item you want to adjust.

4) Press [VOL+ or VOL-] button to adjust the level.

.

5) The data adjusted is memorised automatically in the user mode.

NOTE : The COLOUR TEMP is only to be adjusted in the PC mode.

BRIGHTNESS

CONTRAST

SATURATION

COLOUR TEMP

FLESHTONE

SHARPNESS

NOISE REDUCE

Using the AUDIO SETTING menu

Adjust audio settings

1) Press [MENU] button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item AUDIO SETTING.

3) Press [CH+ or CH-] button to select the item you want to adjust.

4) Press [VOL+ or VOL-] button to adjust the level.

5) Adjusted data will automatically stored in user mode only..

AUDIO SETTING

BASS

TREBLE

BALANCE

Using the PIP menu

1) Press MENU button to enter main menu, press

[VOL+ or VOL-] to select PICTURE IN PICTURE.

2) Press [CH+ or CH-] button to select PIP SIZE, and

press [ VOL+] button to enter the PIP SIZE, then p ress

[CH+ or CH-] button to select OFF/PIP/PBP.

PICTURE IN PICTURE

PIP POSITION

PIP SIZE

3) Press [CH+ or CH-] button to select PIP SOURCE, and

press [ VOL+] button to enter PIP SOURCE, then press

[CH+ or CH-] button to select the PIP SOURCE.

4) Press [CH+ or CH-] button to select PIP POSITION, PIP

PIP BRIGHTNESS

PIP CONTRAST

PIP SOURCE

BRIGHTNESS or PIP CONTRAST, press [VOL+ or VOL-] button to adjust the value.

Note: 1) When main picture is AV/TV/ SCART/S-VIDEO. pip picture is HDTV(YP

B

P

R

) /PC.

2) When main picture is HDTV(YP

B

P

R

) /PC. pip picture is AV/TV/ SCART/S-VIDEO.

-12 -

Using the TV features

Using the MENU LOCK SETTINGS menu

LOCK MENU

1) Press [MENU] button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item MENU

LOCK SETTINGS.

3) Press [CH+ or CH-] button to select LOCK MENU.

4) Press [VOL+ ] button to enable LOCK MENU .

MENU LOCK SETTINGS

LOCK MENU

SET PASSWORD

SET PASSWORD

Password is a four-digit number. The preset password is 1111.

If you want to change the password, you must enter the current password.

1) Press [CH+ or CH-] button to select SET PASSWORD, enter the

current password.

Enter the Menu Lock Password:

______

OK CANCEL

1) Press [CH+ or CH-] button to select SET PASSWORD,

and press [ VOL+] to enter SET PASSWORD.

2) Input the new password , The new password has now stored..

Setting Password

OK

-13 -

Using the TV features

Using the GENERAL SETTINGS menu

OSD POSITION

GENERAL SETTINGS

1) Press [MENU] button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item GENERAL

SETTINGS.

3) Press [CH+ or CH-] button to select OSD POSITION.

4) Press [VOL+ or VOL- or CH+ or CH-]

adjust OSD POSITION.

COLOUR SYSTEM

button to

LANGUAGE ENGLISH

OSD POSITION

COLOUR SYSTEM

OSD LANGUAGE

BLUE SCREEN

SLEEP TIMER

TRANSPARENCY

You can set colour system.

1) Press [MENU] button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item GENARAL SETTING

3) Press [CH+ or CH-] button to select COLOUR SYSTEM .and press

[VOL+] button to enter COLOUR SYSTEM

4) Press the [VOL+ ] button to select between: AUTO, PAL, SECAM.

DEINTERLACER

OSD LANGUAGE

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item GENERAL SETTINGS.

CHANGE PASSWORD

to enter OSD LANGUAGE.

4) Press [ VOL+] button to select the language what you want use.

BLUE SCREEN

1) Press MENU button toenter main menu.

2) Press [VOL+ or VOL-] button to select the item GENERAL SETTINGS.

3) Press [CH+ or CH-] button to select BLUE SCREEN.

4) Press [ VOL+] button to enable BLUE SCREEN .

NOTE : When you enable the blue screen, this will active the Blue screen if there is no signal input.

SLEEP TIMER

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item GENERAL SETTINGS

3) Press [CH+ or CH-] button to select SLEEP TIMER.

4) Press [ VOL+-] button to adjust SLEEP TIMER.

TRANSPARENCY

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item GENERAL SETTINGS.

3) Press [CH+ or CH-] button to select TRANSPARENCY.

4) Press [ VOL+ or VOL-] button to adjust the intensity of transparency.

-14 -

Using the TV features

Using the GENERAL SETTINGS menu

DEINTERLACER

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item GENERAL SETTINGS.

3) Press [CH+ or CH-] button to select DEINTERLACER.

4) Press [ VOL+ ] button to enter the DEINTERLACER.

5) Press [ CH+ or CH-] button to select the feature.

MADI: Motion Adaptive De-Interlacing, by selecting the function, the quality of motion picture will be improved. As a

result, the areas that are not moving in a image will be fully static(flicker free) and the objects that are moving

will have a smooth edge.

LADI: Low Angle Diagonal Interpolation, by selecting the function, a smooth edge on moving objects with diagonal

pattern will be obtained.

Using the PC menu

PC PARAMETERS

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item

PC PARAMETERS.

3) Press [CH+ or CH-] button to select the item you

want to adjust.

NOTE: 1) PC menu is used only on VGA and

YP

B

P

R

mode.

2) The item AUTO is used to adjust position

of picture automatic and it is effective only on

VGA mode. The item AUTO COLOUR

is used to adjust quality of picture manually

when signal is not good sometimes. The

item POSITION is used to adjust the position

of picture. The item CLOCK and PHASE

can adjust quality of picture minutely, and they

are used less.

CLOCK

PHASE

POSITION

AUTO COLOUR

-15-

Using the TV features

Teletext Operations

SELECTING TELETEXT MODE

Select the channel that is broadcasting the desired Teletext program.

Press [ TEXT ] button and alternate between Teletext mode and normal mode.

Note: All the operations below should be under the Teletext mode except TIME operation.

PAGE SELECTION

You can directly input your desired page number by pressing [0~9] buttons.

You can sequentially read pages by pressing [ or ] button.

HOLD

Some Teletext information is contained on more than one page, the pages automatically changing after a given reading time.

Press [ S-Video ] button to stop the page changing.

Press [ S-Video ] button again to allow the page to change.

REVEAL

Some Teletext pages contain quiz or questions with hidden answers.

Press [ ] button to see the answers.

Press [ ] button again to hide the answers.

CANCEL

When a page is selected in Teletext mode it may take some time before it becomes available.

Press [ YPbPr ] button to switch to the TV mode.

When required page is found, the page number will appear at the top of the TV picture, press [ YPbPr ] button to return to the selected Teletext page.

Note: You can change TV program while in this mode.

SUB CODE

Some Teletext pages contain sub page that require you to input the sub code.

Press [ P. Mode ] button until ***|**** is displayed, and enter last four-digit sub code for the sub page you need.

MIX

You can mix Teletext with TV pictures, which means transparent teletext.

Press [Video] to mix, and press [ Video ] again to cancel the mixed effect.

ZOOM (Top/Bottom/Full)

Press the [ PC ] button to display the TOP HALF of the page.

Press again to display the BOTTOM HALF of the page.

Press again to return to a FULL PAGE display.

Note: Changing pages reverts to a FULL PAGE display.

-16-

Using the TV features

Teletext Operations

TIME

Time information is contained in the teletext broadcast.

In Teletext mode, press [Time] to display the time.

FAST TEXT

The RED, GREEN, YELLOW & CYAN buttons are used for quick access to colour coded pages

transmitted by FAST TEXT broadcast.

INDEX

Teletext index page guides you quickly to your desired page.

Press [ S. Mode ] button to enter index page.

-17-

Appendix

Troubleshooting

Before calling a service technician, please check the following table for a possible cause of the problem and some solutions.

Symptoms

TV will not turn on

No picture, no sound

No sound, picture OK

Poor sound, picture OK

Poor picture, sound OK

Unable to select a certain channel

Possible Solutions

Make sure the power cord is plugged in, then press [Power].

The remote control batteries may be dead. Replace the batteries.

Check if you have set the off timer.

Check the antenna/cable connections.

Press [Display] to see if you have select the right signal source.

The sound may be muted. Press [ >] on the remote control or .

The station may have broadcast difficulties. Try another channel.

Check the speakers cable connections.

The station may have broadcast difficulties. Try another channel

Check the speakers cable connections.

Check the antenna connections.

The station may have broadcast difficulties. Try another channel.

Adjust the picture from the menu.

The channel may be skipped. See SKIP on page 13.

Poor colour or no colour

The remote control does not operate

Disorder display at power on

The station may have broadcast difficulties. Try another channel.

Adjust the HUE and COLOUR in the menu.

There may be an obstruction between the remote control and the

remote control sensor.

The batteries may be installed with a wrong polarity.

The remote control batteries may be dead. Replace the batteries.

Check if you have entered Teletext mode. Press [ Text ] to quit.

This may be caused by too short interval between power off and on.

Unplug the power and restart.

Customer important notice : When the TV can not be operationed in some special situation,please unplug the power and restart.

-18 -

Appendix

Cleaning and care

WARNING: Do not try to remove the cabinet back. Refer servicing to qualified service technicians.

To clean the TV screen:

1) Unplug the TV to avoid possible shock hazard.

2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm

water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet

can cause damage to the TV.

3) Wipe off any excess moisture with a clean dry cloth.

4) Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.

Caution

: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.

These chemicals can damage the finish of the cabinet.

-19 -

Specifications

Screen Size: 32-inch(81cm)TFT LCD TV

Native Resolution: 1366 768 Pixels(corresponding to WXGA)

Brightness: 500 cd/m2

Contrast Ratio: 600:1

Colour System: PAL/SECAM

Sound System: B/G, D/K, I, L/L

Tuner: VHF/UHF:48.25~863.25MHz

Antenna: 75 VHF/UHF input

Stereo: NICAM/A2

VIDEO INPUT:

SCART-1 (Video and RGB) Video:1 Vp-p, negative sync, 75 input

RGB:0.7

Vp-p, 75 input

SCART-2 (Video and Y/C) Video:1 Vp-p, negative sync, 75 input

. Y/C separate video signal

Y...1 Vp-p/negative sync/75 input

C...0.283 Vp-p/75 input(NTSC)

0.3 Vp-p/75 input(PAL)

AV input Video:1 Vp-p, negative sync, 75 input

COMPONENT RCA, 0.7 Vp-p/75 input

(480I/60Hz, 480P/60Hz, 576I/50Hz,576P/50Hz, 720P/50Hz,

720P/60Hz,1080I/50,1080I/60Hz)

PC

VGA 15 Pin , Analog RGB signal, 0.7

Vp-p, 75 input

(VGA, SVGA, XGA, SXGA computer signal compatibility)

DVI 30 Pin, Digital RGB signal

(VGA, SVGA, XGA, SXGA computer signal compatibility)

provides a direct digital to digital

Audio in RCA Stereo audio input

TV SET OUT

Audio/Video Output SCART1: CANAL+ ; SCART2 and AV: monitor

Speaker Output 5W+5W

Power Requirement AC 160 to 240V, 50/60Hz

Power Consumption 160W

Dimensions(mm) 892(L) 347(D) 724(H)

Weight(net) 23kg(27kg)

Allowable temperature of operation environment

..............................................0

to 40

ACCESSORIES

Operating Instructions 1

Remote Control Unit 1

Power Lead 1

Dry Cell Battery 2

NOTE

: Specifications and design are subject to possible modifications without notice due to improvements

-20 -

advertisement

Related manuals

Download PDF

advertisement