SCT RemoteCam6-CST Installation Manual
SCT RemoteCam6-CST combines Cisco SpeakerTrack 60, Cisco CodecPlus, and the latest advancements in video conferencing technologies to deliver a powerful and efficient video conferencing solution for small to medium-sized meeting rooms.
The RemoteCam6-CST integrates seamlessly with Cisco video conferencing systems, providing a streamlined and user-friendly experience. Its compact and sleek design makes it ideal for huddle rooms, small conference rooms, and home offices.
With its advanced features, the RemoteCam6-CST enhances collaboration and productivity. Dual video inputs allow for simultaneous connection of two cameras, providing multiple perspectives and dynamic camera control. The integrated microphone and speaker offer crystal-clear audio, ensuring that every participant is heard and understood.
Advertisement
Advertisement
Power e
270° or x D
at Gui
at
LI or
NK or A568B
30’ o
Power y
Wi nt f om
( nt or Suppl
Power Cont
M: .
x 31
RC6-CST Installation Instructions
Supporting the Cisco SpeakerTrack 60 and
Cisco Codec Plus, SX80, C40, C60 & C90
TEST YOUR LINK CABLE
We highly recommend using an Ethernet Network Tester/Analyzer alongside our provided PowerSniffer to confirm your LINK cable’s wiring. Our PowerSniffer only tests conductor continuity and will not identify data integrity or capacity issues.
1. Test and verify your CAT6 LINK cable for UTP 568A/568B. Link cable must be between 30ft - 300ft.
2. Connect the provided PowerSniffer to the SpeakerTrack end of your Cat6 Link cable.
3. Connect the other end of the Link cable to the LINK connection on the Head End module.
4. Connect the WPS-48 power supply to the Head End module.
5. Connect the WPS-48 power supply to AC mains.
6. If the SCT Link cable is properly terminated, it will display eight GREEN LEDs.
If you get any other result, stop and re-terminate cable .
7. Once your cable has been tested, please disconnect the WPS-48 power supply from the RC6-HE module before proceeding to install.
INSTALL THE EXTENSION KIT
Before integrating your RC6-CST kit, please ensure your Cisco SpeakerTrack base is connected to your two Cisco Precision
60 cameras (Power and Ethernet connections) via Cisco’s instructions. n
Connect the camera-end cables:
1. Connect the first RCC-C011 video cable between the RC6-CE’s HDMI connector labeled “HDMI
INPUT 1” and the first camera’s HDMI connector.
The 270° HDMI end will connect to the RC6-CE.
2. Connect the second RCC-C011 video cable between the RC6-CE’s HDMI connector labeled
“HDMI INPUT 2” and the second camera’s HDMI connector. The 270° HDMI end will connect to the
RC6-CE.
3. Connect the first RCC-H016 control cable between the RC6-CE’s RJ45 connector labeled “Ethernet” and the SpeakerTrack’s rightmost RJ45 connector.
4. Connect the PPC-010M power cable between the
RC6-CE’s power output labeled “12VDC Output” and the SpeakerTrack’s power input.
Connect the codec-end cables:
5. Connect the second RCC-H016 cable between the
Cisco SX80’s RJ45 control connector and the RC6-
HE’s RJ45 connector labeled ‘Ethernet 1’.
6. Connect the first RCC-H001 cable between the codec’s HDMI connector and one of the two HDMI outputs labeled “HDMI OUT 1”.
7. Connect the second RCC-H001 cable between the codec’s second HDMI connector and one of the two RC6-HE’s HDMI connectors labeled “HDMI
OUT 2”.
8. Connect one end of your Cat6 LINK cable to the
RC6-HE module’s “SCT Link” port. Connect the other end to the RC6-CE module’s “SCT Link” port.
9. Connect the WPS-48 Power Supply to the “DC
48V In” jack on the RC6-HE Module.
• ALLOW UP TO TWO MINUTES FOR THE SPEAKERTRACK SYSTEM TO INITIALIZE •
Installation Status - Refer to our modules’ LEDs for installation status:
MODULE
RC6-CE
RC6-HE
LED LABEL
OK LED
OK LED
ACTIVE STATUS
Blinking Green (~1 second interval)
Blinking Green (~1 second interval)
RC6-HE HDCP LED Blinking Green (~0.5 second interval)
Cable Table - Part numbers, descriptions and functions of all SCT cables provided for the RC6-CST.
This kit is also inclusive of [2] mount ears for the Camera End as well as [1] RC-RK6/7 Rack Shelf .
DESCRIPTION
RCC-C011 (x2) 3’ 270° HDMI Cable Video connection between camera pair and RC6-CE.
PPC-010M
RCC-H001 (x2)
RCC-H016 (x2)
1’ Power Cable
3’ HDMI Cables
3’ RJ45 to RJ45
Supplies power from RC6-CE to SpeakerTrack base.
Dual-video connection between RC6-HE and codec.
Control connection between RC6-HE and codec.
TECH SUPPORT: 203-854-5701 • WWW.SOUNDCONTROL.NET • ©SOUND CONTROL TECHNOLOGIES, INC

Public link updated
The public link to your chat has been updated.
Advertisement