Bolens 11A-B0BL765 21" Push Mower Quick Start Guide
The Bolens 11A-B0BL765 is a versatile and powerful lawnmower designed to tackle various lawn care tasks efficiently. With its easy-to-use features, it's an ideal choice for homeowners seeking a reliable and user-friendly lawnmower.
advertisement
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
1
A. Remove the wing nuts and carriage bolts securing the upper handle to the lower handle.
B. Remove T-bolts from the handle brackets.
A
A
B
A. Insert the T-bolts removed in Step 1B through the handle brackets to secure the handle in place.
B
4
B. Secure upper handle to lower handle with wing nuts ( on outside ) and carriage bolts removed Step 1A.
B Blade Control Handle
A
2
Pivot the upper handle upward.
A 5
Starter
Rope Handle
Wing Nuts
B D
T-Bolts
3
A. Pull upward on the handle until the holes in lower handle line up with the holes in the handle bracket.
© 2015 11A-B0B
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
C
A. Hold blade control handle against upper handle.
B. Slowly pull starter rope handle from engine and slip starter rope into the rope guide.
C. Tighten rope guide wing knob.
D. Use cable tie to secure cables to lower handle.
778-12364B
Need Help? Call 1-888-TO-HELP-U
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
6 8
Pour the entire contents of the oil bottle (supplied) into the oil fill. Check the oil level using the dipstick. (Refer to the Operator’s Manual)
7
Gas Fill
Primer
Make sure the spark plug boot is connected to the spark plug before attempting to start.
9
3
Push the primer three times.
10
Fill fuel tank with clean, fresh gasoline. Do not fill above the base of fuel tank neck.
Oil Fill /
Dipstick
Spark Plug Boot
© 2015 11A-B0B
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
While standing behind the machine, pivot the Blade
Control Handle against the upper handle.
Grasp the starter rope handle and pull with quick, fullarm stroke. If the engine does not start after five pulls, repeat steps 9 and 10.
778-12364B
Need Help? Call 1-888-TO-HELP-U
advertisement
Related manuals
advertisement