advertisement
Features
• Metal construction
• Intended for use with Rite-Temp
®
Rite-Temp
® valves or HiFlow
• Variety of handle style options
• Available with 5-1/4
″
(13.3 cm) diverter bath spout with NPT or slip-fit connection
Codes/Standards Applicable
Specified model meets or exceeds the following:
• ASME A112.18.1/CSA B125.1
• IAPMO/cUPC
• ADA
FORTÉ
®
RITE-TEMP
®
PRESSURE-BALANCING BATH AND
SHOWER VALVE TRIM
K-T10276
ALSO K-T10277, K-10280, K-10281
Colors/Finishes
• CP: Polished Chrome
• Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Description
K-T10276-4 Shower only trim*, sculpted lever handle, showerhead
K-T10276-4A Shower only trim*, traditional lever handle, showerhead
K-T10277-4 Valve only trim*, sculpted lever handle
K-T10277-4A Valve only trim*, traditional lever handle
K-10280-4 Sculpted NPT diverter bath spout
K-10280-4A Traditional NPT diverter bath spout
K-10281-4 Sculpted slip-fit diverter bath spout
K-10281-4A Traditional slip-fit diverter bath spout
*Rite-Temp valve must be ordered to complete faucet.
Colors/Finishes
❑ CP
❑ CP
❑ CP
❑ CP
❑ CP
❑ CP
❑ CP
❑ CP
❑ Other ____
❑ Other ____
❑ Other ____
❑ Other ____
❑ Other ____
❑ Other ____
❑ Other ____
❑ Other ____
Product Specification
Rite-Temp pressure-balancing single-control bath and shower faucet trim shall be of brass construction. Shower trim shall include showerhead with arm and flange, and faceplate with handle. Valve only trim shall include faceplate with handle. Faucet trim shall be K-_____-_____-_____ and Rite-Temp valve shall be K-304-_____-NA OR K-306-KS-NA HiFlow Rite-Temp valve.
Page 1 of 2
1018257-4G
USA: 1-800-4-KOHLER
Canada: 1-800-964-5590 kohler.com
FORTÉ
®
RITE-TEMP
Technical Information
®
Required Accessories
K-304-K Rite-Temp valve without stops, NPT connections
K-304-KS Rite-Temp valve with stops, NPT connections OR
K-306-KS HiFlow Rite-Temp valve with stops, NPT connections OR
K-304-KP Rite-Temp valve with PVC connections
Recommended Accessories
HiFlow Rite-Temp thin wall installation kit* 88526
* Required when using the K-306-KS valve in a fiberglass or acrylic installation.
OR ❑ NA
❑ NA
❑ NA
❑ NA
Install this product according to the installation guide.
Install Rite-Temp valve according to valve installation guide.
Avoid cross-flow conditions. Do not install shut-off device on either valve outlet.
Cap shower outlet if deck-mounted spout, diverter, or handshower is connected to the spout outlet.
Install straight pipe or tube drop of 7 ″ (17.8 cm) to 18 ″ (45.7
cm) with single elbow between valve and wall-mount spout.
Optional Accessories
Forté deep roughing-in kit for Rite-Temp valve (lever handles)
1025388
Installation Notes
WARNING: Risk of damage to the K-306-KS valve assembly.
When using the K-306-KS valve in a fiberglass or acrylic installation, use the thin wall installation kit (88526).
1/2"-14 NPT
6"
(15.2 cm)
6"
(15.2 cm)
72" (182.9 cm) –
78" (198.1 cm) to
Floor (Typical)
Sculpted
2-7/8"
(7.3 cm)
6-3/8"
(16.2 cm) D.
Traditional
3"
(7.6 cm)
For slip-fit spout, tubing must extend 2-1/8" (5.4 cm) Min;
3-1/2" (8.9 cm) Max beyond finished wall.
For 1/2" NPT spout, pipe must extend 4-1/2" (11.4 cm) beyond finished wall.
10" (25.4 cm) to Spout
(Bath Only)
48" (121.4 cm) to Floor
(Shower Only)
5-1/4" (13.3 cm)
Sculpted
5-1/4" (13.3 cm)
Top of Bath 4" (10.2 cm)
Product Diagram
FORTÉ
®
RITE-TEMP
®
Page 2 of 2
1018257-4G
PRESSURE-BALANCING BATH AND SHOWER VALVE TRIM
5-1/4" (13.3 cm)
Traditional
advertisement
Related manuals
advertisement