WamBam Fence VG13005 Traditional Yard and Pool Gate Installation Manual
WamBam Fence VG13005
The WamBam Fence VG13005 is a vinyl gate designed for use with the company's fence systems. It is made of durable .050in. and .090in. thick vinyl and is available in a variety of sizes to fit different openings. The gate comes with all the necessary hardware for installation, including hinges, latches, and screws.
The WamBam Fence VG13005 is easy to install and can be assembled in just a few hours. It is also maintenance-free, so you won't have to worry about painting or staining it. The gate is also weather-resistant, so it can withstand the elements without fading or warping.
Advertisement
Advertisement
Yard & Pool
Vinyl Gate
REALLY
installing your WamBam gate.
Ver 1, July 2015
1-877-778-5733 www.wambamfence.com
Yard & Pool Vinyl Gate
Reality Check
1 - Read Over Fence Instructions First
Your gate and fence will work better together as an integrated
solution if you first take the time to read and understand your
fence instructions.
2 - Do a Dry Run First on the Gate Frame
Only (not pickets or boards)
Please do not glue or screw your gate frame together until you
have first temporarily assembled the gate. In other words,
do a dry run first.
This will ensure four things:
a) The assembled gate is the correct width as per
the product overview drawing.
b) That you have everything necessary to complete the gate.
c) That you will have assembled the gate in the correct order.
d) All the pieces fit and function properly.
It is easier to trouble shoot when things are not screwed together.
3 - Ideally, Install Your Gate Posts
Before Your Fence Posts
Your fence panels will be more forgiving for a custom fit than
your gate. Ideally, position and install your gate posts
before you do anything else, or very early on in the
process of setting up your fence run.
Install Your Gate Posts
Before Installing Your
Fence Posts.
Confirm Opening Prior to Final
Assembly of Gate w/Hardware.
For more information, contact us at 1 877-778-5733.
1
Yard & Pool Vinyl Gate
4 - Ideally, Do Not Hang Your Gate System Off a Single
Non-Supported Post.
Your gate will perform better and last longer if your hinge post is connected to a panel of fence which is
connected to another post. The weight strain will be transferred unto two posts versus just one. Installing
fence panels on both sides of your gate is the ideal in all situations. If this is not possible because of space
restrictions, please contact us for alternative solutions to overcome.
Do Not Hang Gate on Lone Soldier Post.
Pool Code Notes
For swimming and other child safety gates, most safety standards specify:
a) Your fence height needs to be between 4’ and 6’ high minimum
b) Your gate needs to open outwards away from the pool
c) Latch releasing mechanism to be minimum 54” off the ground.
*The Yard & Pool gate will require a specialized latching system to meet pool code.
Use MagnaLatch Top Pull Hardware (not included).
Magna Latch Top Pull Code is # MLTPS2BGA.
*Always confirm these and other requirements with the appropriate authorities in your area.
Code will change from one location to another across the country.
Gate Brace Warning
The gate brace included with this gate may be considered a climbing surface by some pool inspectors and therefore in conflict with pool code. This gate can be assembled and installed without the brace if and when necessary.
2
For more information, contact us at 1 877-778-5733.
Yard & Pool Vinyl Gate
Box Contents
.050in. wall thickness
.090in. wall thickness
Each Gate Box Includes:
• Top Rail (1)
• Gate Hinges (2)
• Pickets (8)
• Arch Brackets (2)
• Gate Latch (1)
• Vertical Stiles (2)
• Tube of Glue (1)
• Gate Brace (1)
• Stainless Steel Screws (16)
• Gate Bottom Brackets (2)
• Bottom Rail (1)
Sold Separately:
• 6ft. Posts (2-Pack)
Posts Sold Separately as 2-Packs
For more information, contact us at 1 877-778-5733.
3
Yard & Pool Vinyl Gate
PRODUCT OVERVIEW
Gate Installation Gate Assembly
3.56in.
1.5in.
A
58.84in.
52in.
56.84in.
41.5in.
C D
22in.
3.5in.
A
1.5in.
3.5in.
B
48in.
B
1.5in.
3.5in.
1.5in.
C
3.5in.
.090in. wall thickness
7.75in.
2in.
D
3.5in.
1.5in.
Ground
Concrete Footing
50in.
54.5in.
Posts Sold Separately
For more information, contact us at 1 877-778-5733.
10in.
20in.
36in.
4
Yard & Pool Vinyl Gate
Detailed Installation Instructions
STEP 1 Assemble the Gate Frame Bottom & Sides
A
Handle with care: vinyl weld glue takes approximately five minutes to cure.
GL
UE
Completely assembled gate shown
B Did you do a dry run of assembly first?
Please read page 1 of instructions.
A - Run bead of vinyl weld continously around
the inside of the gate bracket
Note that the bottom rail
is Ribbed internally.
C
Insert fully to this point.
B - Insert the bottom rail ALL THE WAY until it BOTTOMS OUT inside gate bracket
D
GLUE
GLUE
Fasten gate brackets to internal members though inside of frame using screws.
IMPORTANT!
Insert fully to this point.
C - Insert the bottom rail ALL THE WAY until it
BOTTOMS OUT INSIDE GATE BRACKET
D - Insert vertical gate stiles. They will BOTTOM OUT
against bottom horizontal rail
For more information, contact us at 1 877-778-5733.
5
Yard & Pool Vinyl Gate
STEP 2
A
Insert Pickets & Assemble
the Gate Frame Top
GL
UE
D
Did you do a dry run of assembly first?
Please read page 1 of instructions.
A - Run bead of vinyl weld continously around
the inside of the gate bracket
B
Insert pickets in the proper order according to their height as shown above.
Insert to this point.
D - Insert pickets in the proper order through
holes in the bottom rail
E
C
CORRECT
WRONG
B - Insert the top rail inside arch brackets
as illustrated
UE
GL
GL
UE
C - Run bead of vinyl weld continously around
the inside of the gate bracket
E - Slide gate arch (with brackets) over the
pickets and vertical gate stiles
For more information, contact us at 1 877-778-5733.
6
Yard & Pool Vinyl Gate
STEP 3
A
Screw Gate Frame/Brackets
48in.
A - ENSURE YOUR GATE IS SQUARE and screw brackets as illustrated. The corner-to-corner measurement must be the same, and the width of the gate should be 48”.
For more information, contact us at 1 877-778-5733.
7
Yard & Pool Vinyl Gate
STEP 4
A
Fasten Gate Hinges
& Gate Latch
For swimming and other child safety gates, most safety standards specify:
a) Your fence height needs to be between 4’ and 6’ high minimum
b) Your gate needs to open outwards away from the pool
c) Latch releasing mechanism to be minimum 54” off the ground.
*The Plain Jane gate will require a specialized latching system to meet pool code.
Use MagnaLatch Top Pull Hardware (not included) and Captain Morgan Post Caps Only.
Magna Latch Top Pull Code is # MLTPS2BGA.
*Always confirm these and other requirements with the appropriate authorities in your area.
Code will change from one location to another across the country.
A - Fasten gate hinges and gate latch onto the gate brackets with screws
For more information, contact us at 1 877-778-5733.
8
Yard & Pool Vinyl Gate
STEP 5
Assemble & Fasten
Gate Brace
A
Gate Brace Parts
B
(2)
.25” x .75”
Hex Bolts
(2)
.25” Lock
Washers
(2)
.25” Nuts
Top Bar
(4)
1.25” (#10)
Screws
Bottom Bar
1 2 3
A - Assemble gate bace with bolts, washers and nuts as necessary.
B - Re-confirm the gate is square, and screw bracing into place.
9
For more information, contact us at 1 877-778-5733.
Yard & Pool Vinyl Gate
STEP 6
Position, Adjust & Align Gate/
Secure Hinges to Posts
A
A - Use temporary spacers or blocks to rest the gate on during alignment and installation
B
B - Fasten hinges to posts with screws
For more information, contact us at 1 877-778-5733.
10
Yard & Pool Vinyl Gate
STEP 7 Level Gate & Adjust Hinges
A B
LEVEL
A - Fasten gate hinges accordingly
C
Adjust the spring tension in gates as necessary.
Use steel insert pin.
D
B - Check for level, fit and function to latching post
C - Hinges can be adjusted moderately
to bring gate into level alignment
with post
Latch is designed for left and right hand applications.
Temporarily remove the spring, bolt and reverse paddle portion as necessary.
11
Yard & Pool Vinyl Gate
STEP 8
Align & Install Latch
A
B
A - Align and fasten the gate latch catch to fit and function with the gate finger.
Congratulations! You did it!
Go grab a beverage of your choice, admire your handy work, and show us what you got by entering our annual photo/video contests!
For more information, contact us at 1 877-778-5733.
12

Public link updated
The public link to your chat has been updated.
Advertisement