Boss Audio Systems BV2950TU User Manual

PDF

Document

Publicitate

BV2950TU

Multi-Media Disc Player with Built-in TV Tuner and FM Modulator

Congratulations on your purchase of a Multi-Media Disc Player.

It has been designed, engineered and manufactured to bring you the highest level of performance and quality, and will afford you years of listening pleasure.

Thank you for making a your choice for mobile video entertainment.

USER’S MANUAL

Page

CONTENTS

Safety Information

Installation

Power Connections

Audio Connections

Operation

Features and Controls

Using The Remote Control

General Operation

CD/MP3 Operation

DVD/VCD Operation

Data Disc Play Operation

Memory Card Play Operation

USB Device Operation

AV In Operation

T V Operation

FM Modulator Operation

Setup

System Setup

Language Setup

Audio Setup

Digital Setup

Specifications

Troubleshooting

Additional Information

BV2950TU User ’s Manual - page 1

S a f e t y I n f o r m a t i o n

Caution:

This mobile DVD player is a class 1 laser product. However, this mobile DVD player uses a visible/invisible laser beam which could cause hazardous radiation exposure if directed. Be sure to operate the mobile DVD player correctly as instructed.

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Do not open covers and do not repair yourself. Refer servicing to qualified personnel.

Warning:

- To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.

- To reduce the risk of fire or electric shock, and annoying interference, use only the recommended accessories.

- This device is intended for continuous operation.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is prohibited.

Region management information

This mobile DVD Player is designed and manufactured to respond to the Region

Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this

Mobile DVD Player, this Mobile DVD

Player cannot play this disc.

BV2950TU User ’s Manual - page 2

Disc notes

You can playback the following discs:

DVD VIDEO/DVD AUDIO

VIDEO CD/AUDIO CD

MP3/WMA/JPEG/MPEG4

Handling and cleaning

- Dirt, dust, scratches and warped discs will prevent proper operation.

- Do not place stickers or make scratches on discs.

- Do not bend discs.

- A disc should always be kept in its case when not in use to prevent damage.

- Do not place discs in the following places:

1.Direct sunlight.

2.Dirty, dusty and damp areas.

3.Near car heaters.

4.On the seats or dashboard.

Disc cleaning

Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth slightly moistened with isopropyl

(rubbing) alcohol. Never use solvents such as benzene, thinner or conventional record cleaners as they may mar the surface of the disc.

Label side up

Do not bend

Do not touch the underside of the disc

Wipe the disc from center toward the outside edge

Preparing new discs with rough spots

A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the disc will not be

properly seated and the player will not play the disc. Therefore, remove the rough edges in advance by using a ballpoint pen or pencil as shown on the right. Press the side of the pen or pencil against the inside and outside edges of the disc.

Rough spots on outside edge

Ball point pen or pencil

Rough spots on inside edge

I n s t a l l a t i o n

Notes:

- Choose a mounting location where the unit will not distract the driver.

- Before installing the unit, connect the wiring temporarily and make sure it is all connected properly and the unit and the system works.

- Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

- Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

- Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

- If installation angle exceeds 30° horizontal, the unit may not perform properly.

- Avoid installing the unit where it will be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

The unit is designed for home-use and car-use. When installed in the car, please follow the installation instructions below.

SCREW

M5x25

REMOVE THE SCREWS WHICH LOCK THE DVD MECHANISM

SCREW

M4x5

SCREW

M4x5

Notes:

1. First remove the two transport screws that lock the DVD mechanism. Then attach the brackets on both sides of unit with screws (m4X5). Finally, install the unit with screws

(m5X25).

2. When locating the bracket, you can slide the screw (m5X25) to left side or right side as necessary. In the figure above, select two holes from those marked 1, 2, 3 and 4 to secure the bracket.

BV2950TU User ’s Manual - page 3

P o w e r C o n n e c t i o n s

Using Cigarette Lighter Adaptor

Use the conversion cable to obtain DC 12V power supply input through the AC/DC

ADAPTER or the cigarette lighter according to the illustrations shown below:

Using Wired Connection to Vehicle Battery

According to the illustrator below, install the unit in the car and obtain DC 12V power supply input.

BV2950TU User ’s Manual - page 4

CONSTANT 12 VOLTS

(YELLOW)

GROUND (B-) (BLACK)

IGNITION SWITCH (ACC+) (RED)

A u d i o C o n n e c t i o n s

Using Head Unit RCA Audio Inputs

To Audio system inputs

RIGHT

Red

LEFT

White

VIDEO

Yellow

To Video system inputs

IR Sensor

If you need to mount the DVD player in a location where the control panel is inaccessible, or where the line-of-sight between the remote control and the face of the player is interrupted, connect the remote sensor as shown in the diagram above.

Mount the IR Sensor in a convenient location which is in direct line-of-sight with the use location of the remote control. Point the remote control in the direction of the sensor to operate the player.

Using Built-in FM Modulator to Send Audio to Head Unit

To Car Antenna

BV2950TU User ’s Manual - page 5

O p e r a t i o n

Features and Controls

Front panel

Remote Control

BV2950TU User ’s Manual - page 6

-/--

POWER

Press this button to turn the unit on/off.

Press this button to pause disc playback.

Press it again to resume playback.

Press this button to switch between DVD and

AV modes.

Press this button to skip back one track.

Press this button to skip to the next track.

EJECT

Press this button to eject the disc from the disc slot (7).

7. DISC Slot

Gently insert a disc (with the printed side up) into the disc slot (7) until you feel some resistance.

8. AV IN JACK

Connect external audio/video equipment to the unit through the AV IN terminals.

9. USB PORT

10. SD/MMC CARD SLOT

11. IR SENSOR

12. RESET

Press RESET button (12) to restore the default settings.

13. DISP

Press this button to display disc information during playback.

14. A-B

A-B repeat allows a selected passage to be repeated playback.

15. RPT

Use this button to switch from the different modes available.

16. ZOOM

Press this button to zoom in or out of the video image.

17.▲/▼/◄/►

In some menus, ▲/▼/◄/► buttons serve as cursor buttons to move up/down/left/right.

18. ENTER

Use this button to confirm the Track/Chapter selected by the numeric buttons or selected with the cursor buttons on TV screen.

19. SETUP

Press the button to enter into the System

Setting menu.

20. TITLE/PBC

In DVD or VCD (with PBC on) mode, press TITLE/PBC button to display the TITLE menu that is stored on disc.

21. 0~9

Numeric buttons are used for Track/Chapter selections and other functions.

22. AUDIO

On multi-audio sound track disc, press this button to change the AUDIO sound track.

23. SUB-T

Changes the subtitle language on multisubtitle language DVD disc.

24. MUTE

Press to silence the audio output. Press it again to resume the previous volume level.

25. ANGLE disc.

26. VOL+/VOL-

Press the VOL+ to increase the volume level.

Press the VOL- to decrease the volume level.

27. MENU

Press this button repeatedly to step through and select an FM frequency between 87.7MHz

and 88.9MHz.

28.

Press the button to search forward rapidly.

29.

Press the button to search in reverse rapidly.

30. GOTO

Press the button to select the bookmark that you set.

31. ■ STOP

Press once to pause playback. Press it again to stop playback.

32. PROG

Press this button to play the tracks in an order which you have programmed.

33. RDM

Press the button to play all tracks on the disc in a random order. Press again to cancel this function.

BV2950TU User ’s Manual - page 7

U s i n g T h e R e m o t e C o n t r o l

Preparing and using the remote control

* Before using the remote control, please take the transparent insulator strip off the bottom of remote control.

* Point the remote control at the remote sensor (11) from no more than 6 feet away.

* If the IR sensor is exposed to direct sunlight, the remote control may not be able to communicate with it properly. You may need to relocate or shield the IR sensor.

0 * If you are more than 30 away from being directly in front of the IR sensor, the remote control may be unable to communicate properly.

* The remote control is a small, lightweight precision device. To avoid damage, short battery life, operational errors and poor response, observe the following:

-Do not subject the remote control to excessive shock.

-Do not put in a pocket.

-Keep away from food, moisture and dirt.

-Do not place in direct sunlight.

Battery replacement

The remote control uses a lithium button type battery, model CR 2025 3V. Do not use any other kind of battery in the remote. Follow these instructions when installing or replace the battery.

1. Remove the battery holder by pressing the locking tab with your thumb and slide the battery holder out.

2. Replacing the battery

Replace the battery with the same type of battery and the (+) side facing up.

Closing the cover

Gently push in the holder until it is securely locked into place.

BV2950TU User ’s Manual - page 8

G e n e r a l O p e r a t i o n

Initial system start-up

Be sure to press the RESET button (12) when using the unit for the first time, after all connections are completed correctly.

1. Turn off the unit power.

2. Press RESET with a ballpoint pen or similar pointed object.

Turning power on and off

Press button (1) or insert a disc to turn on the unit.

When system is on, press button (1) to turn off the unit.

Loading/Removing a disc

1. Insert the disc into the disc slot (7) with the printed side facing up. The player will play the disc automatically.

2. Press button (6) to eject the disc.

Adjusting the volume level

Press VOL+/VOLbutton (26) to adjust the volume level.

Input source selection

Press MODE (3) to select between DVD ,

TV and AV IN mode.

Last position memory feature

- During disc playback, if you press the

POWER button (1) to turn off the unit and then press the button again to turn on the unit, the DVD unit will resume playing from the point that it was interrupted.

-During disc playback, if you press the

MODE button (3) to switch to other mode, and then return to DVD mode again, the unit will resume playing from the point that it was interrupted.

Reset function

RESET button on the housing must be activated with either a ballpoint pen or thin metal object. The RESET button (12) is used in the following situations:

-After initial installation of the unit when all wiring is completed.

-Some of the function buttons do not operate.

- Error symbol appears on the display.

ESP function

This unit features ESP (anti-shock) protection. It works by “playing ahead” and buffering the stored part of the program, playing it back when the realtime portion of the program has been disrupted. Depending on the listening/viewing mode you are in, the amount of time of disruption which can be hidden is as follows:

CD, VCD: 18 seconds

MP3:160 seconds

DVD: 6 seconds

MPEG4: 20 seconds

BV2950TU User ’s Manual - page 9

C D / M P 3 O p e r a t i o n

Playback

Insert a disc with the label side facing up. The disc will be drawn into the player automatically. The information for the current disc will be shown on the screen .

For CD:

1).

Press ◄ /► button to move between work area A, B and C.

2).

Press ▲/▼ button or input using the numeric buttons to select the desired folder or file of this work area.

3).

Press ENTER button (18) to confirm the selected item.

Return to the beginning of the previous track (file) by pressing the 9 button (4).

Advance to the beginning of the next track (file) by pressing the : button (5).

Pause playback

Press button (2) to pause playback.

Press it again to resume playback.

Stopping playback

Briefly press the

< button (31) to stop the playback .

W hen the < button is pressed and then you press button

( 2), normal playback will resume.

- Press < button (31) twice and then press button to stop the playback and go back to first track.

Fast-forward / Fast-reverse

1. Fast-forward

Press 8 button (28) during playback.

Each time the button is pressed, the speed of fast-forward increases as follows :

FORWARD 2X Æ 4X Æ 8X Æ 20X

In fast-forward state, press to return to normal playback.

button (2)

2. Fast-reverse

Press 7 button (29) during playback.

Each time the button is pressed, the speed of fast-reverse increases as follows:

BACKWARD 2X Æ 4X Æ 8X Æ 20X

In fast-reverse state, press button (2) to return to normal playback.

Repeat play/ Paragraph repeat play

Repeat play:

Use this function when you wish to repeat a whole disc, a track or a directory in the disc.

1) Press RPT button (15) repeatedly to select different repeat modes.

2) For different types of discs, pressing

RPT button (15) has different effects.

For CD:

REP1 →REP ALL→REP OFF

For MP3:

REP1 →REP DIR→REP ALL→REP OFF

BV2950TU User ’s Manual - page 10

Note:

REP 1: Only one track (file) is played repeatedly.

REP DIR: Only tracks (files) in a folder are repeatedly playing.

REP ALL: An entire disc is played repeatedly.

REP OFF: The mode returns to normal playback.

- Paragraph repeat play:

A-B repeat allows a selected passage to be repeat continuously.

Press A-B button (14) at the start of the desired passage.

REPEAT A-

Press A-B button (14) at the end of the passage.

REPEAT B-

Then the unit will repeat playing the passage you just set from A to B.

To return to normal playback, press A-B

Button again.

REPEAT CANCEL

Playing in random order

Press RDM button (33) to switch the random mode on/off. In this mode, tracks

(files) on the disc will be played in a random order.

D V D / V C D O p e r a t i o n

Playback with PBC menu

Some VCD or SVCD discs contain a simplified menu to assist in selection of tracks. Viewing this menu requires a system called Playback Control (PBC).

PBC creates this disc directory “on-thefly” if PBC has been enabled. To turn PBC

On, press the PBC button (20). (Please note that PBC does not accommodate the following features: REPEAT, RANDOM,

A-B, PROGRAM and GO TO).

Playback with menu

If the DVD disc or VCD/SVCD discs has a menu system, and the PBC (playback

Control) setting is on, you can display the menu which allows you to select the program for playback by pressing the

PBC button (20).

1. Move the cursor buttons ( ▲/▼/ to highlight the item you wish to select.

2. Press ENTER (18) to select this item.

Some discs offer a series of menus which with a wide variety of choices. You can continue to navigate the menu further

( using a combination of the cursor buttons

▲/▼/ ◄ ►) and the ENTER button (18).

Pausing playback

To pause playback, press (2). Press again to resume playback. Please note that when playback is resumed, there may be a short delay in either the image or sound. This is normal.

Stopping playback

Briefly press the button (31) to stop playback. When the button is pressed and then press button (2), resume to the normal playback.

Press button (31) twice and then press

(2) to stop playback and go back to the first track/chapter.

BV2950TU User ’s Manual - page 11

Fast-forward / Fast-reverse

1. Fast-forward

Press

8 button (28) during playback.

Each time the button is pressed, the speed of fast-forward increases as follows:

FORWARD 2X Æ 4X Æ 8X Æ 20X

In fast-forward mode, press to return to normal playback.

button (2)

2. Fast-reverse

Press

7 button (29) during playback.

Each time the button is pressed, the speed of fast-reverse increases as follows:

BACKWARD 2X Æ 4X Æ 8X Æ 20X

In fast-reverse mode, press button (2) to return to normal playback.

Finding the beginning of chapters or tracks (files)

Use this function to easily move to the beginning of the chapters or tracks (files) on the disc.

During playback, press the

: button (5) or

9 button (4) to skip and playback the chapter/track.

:Press the button to start playback from the beginning of the next chapter or track (file).

:Press the button to start playback from the beginning of the previous chapter or track (file).

Note:

1. Some DVDs do not have chapters.

2. For some VCD2.0 discs (PBC control),

: 9 or

8 7 buttons may be unavailable.

Repeat play/ Paragraph repeat play

Repeat play:

Use this function when you wish to repeat an entire disc, a track or a chapter in the disc.

1) Press RPT button (15) repeatedly to select different repeat modes.

BV2950TU User ’s Manual - page 12

2) For different types of discs, pressing

RPT button (15) has different effects.

For DVD:

REP CHAPTER →REP TITLE→REP OFF

For VCD/SVCD:

REP 1 →REP ALL→REP OFF

NOTES:

REP 1: Only one track (file) is played repeatedly.

REP CHAPTER: A chapter is played repeatedly.

REP TITLE:

REP ALL:

A title is played repeatedly.

An entire disc is played repeatedly.

REP OFF: The mode returns to normal playback.

* Repeat feature does not support VCD

2.0 (PBC is on).

-paragraph repeat play:

Use this function when you wish to repeat play a desired paragraph. A-B repeat allows a passage to be repeated continuously.

Press A-B button (14) at the start of the desired passage.

REPEAT A-

Press A-B button (14) at the end of the passage.

REPEAT B-

The unit will repeat playback of the passage you just set from A to B.

To return to normal playback, press A-B button again.

REPEAT CANCEL

Searching directly by chapter or track number

Use this function to easily move to the beginning of the chapters or tracks (files) on the disc.

Please note: This operation can only be controlled from remote control.

1. During playback, pre-stop or pause, input the chapter or track number you

2. Waite a moment for the player locate the track.

Playback starts from the selected chapter or track.

* This function is only available for discs on which chapter numbers are recorded.

Playing in random order

Press RDM button (33) to switch the random mode on/off. If the random mode is on, tracks (files) on the disc will be played in a random order.

On Screen Display function

Press the DISP button (13) on the remote control during playback to display on screen information about the current disc.

For DVD:

Pressing and holding DISP button (13) on the remote control to display information in the following manner.

Displays the remaining playback time for the current chapter.

5)T:

Displays the total playback time for the current title.

6)T-:

Displays the remaining playback time for the current title.

7)C:

Displays the total playback time for the current chapter.

Displays the current disc language, audio type, subtitle language and play angle.

GOTO function

The GO TO function allows you to select a specific place in the program where you want to begin playback. The function is displayed slightly differently between

DVD and VCD modes.

Press GOTO button (30), the screen will display the following message:

FOR DVD:

For VCD:

1) TT

Displays the current title number and total number of titles.

2) CH

Displays the current chapter number and total number of chapters.

Displays the playing time for the entire disc.

4)C-:

Use the number keys (21) to input the

Track and Time then press ENTER button

(18) to confirm.

ZOOM function

Press ZOOM button (16) to increase or decrease the size of the image. Please note that the ZOOM function is only available on discs which support it.

ZOOM 2

1/2

Æ ZOOM 3

ZOOM 1/3

Æ ZOOM 4

ZOOM 1/4

Æ ZOOM

ZOOM

OFF

In zoom mode, press ▲/▼/ ◄/►buttons

(17) to move pictures up/down/left/right direction in order to find the area of the picture that you want to zoom into.

Multi-subtitle language function

Some DVDs have multiple subtitle languages. The subtitle language can be changed or subtitles hidden during playback.

BV2950TU User ’s Manual - page 13

Press the SUB-T button (23) during playback. The following information will be shown on the screen.

Each time you press the button, the subtitle cycles between the different languages recorded on the disc.

Notes:

- Not all discs will allow changing the subtitle during playback. In these cases, select the subtitle from the DVD menu.

- There may be a delay before the selected subtitle appears.

- For some discs, the subtitles will be displayed even when this is set to off.

- The number of available languages varies from disc to disc.

Switching the audio tracks

For VCD/SVCD discs which have multiple audio tracks, you can change the audio track temporarily during playback

Press the AUDIO button (22) to switch between the audio tracks recorded on the disc.

Notes:

- Some discs only contain one soundtrack language.

Multi-audio language function

For DVD discs which have multiple language soundtracks, you can change the language track temporarily during playback.

Press the AUDIO button (22) to switch between the audio tracks recorded on the disc.

Notes:

- The language number is different according to the disc.

BV2950TU User ’s Manual - page 14

- Some discs only contain one soundtrack language.

- Not all discs will allow changing the subtitle during playback. In these cases, select subtitle from the DVD’s menu.

Multi-angle function

For DVD discs in which scenes have been filmed from multiple angles, the viewing angle can be switched during playback.

Press ANGLE (25) during playback. The following information will be shown on the screen.

ANGLE 1

The angle setting cycles between the available viewing angles recorded on the disc each time the button is pressed.

Notes:

- The ANGLE function is only available for discs which support it and programs in have been recorded.

- Depending on the disc, the angle may switch in one of two ways.

1. Seamless: The angle switches smoothly.

2. Non-seamless: When the angle is switched, a still picture is displayed first, after which the angle switches.

- The angle number varies from disc to disc.

Program play function

- In VCD/CD playback mode, press

PROG button (32) to activate the program edit interface as follow:

Use ▲/▼/ the item that you want to program.

1) The item you selected will become highlighted.

2) Input the track number that you want to program by numeric buttons (0~9) on the remote control.

3) Press ▲/▼/ move to “PLAY” operation button and then press ENTER button (18) to program the playback.

- In DVD/MP3 playback mode, press

PROG button (32) to activate the program edit interface as follow: password. Why?

The current disc has a “Parental Control” level, and the player’s parental level is set below the level of the disc. To view this disc, you should enter the correct password to play the disc normally.

NOTE:

For how to set the “Parental Control” level, please refer to “Parental Control” on page 18.

D a t a D i s c P l a y O p e r a t i o n

When you insert a data disc including audio (MP3), movie (MPEG4) or picture

(JPG) files into the disc slot, the following media play window will be shown on the screen:

Use ▲/▼/ the item that you want to program.

1) The item you selected will become highlighted.

2) Input the track number that you want to program by numeric buttons (0~9) on the remote control.

3) Press ▲/▼/ move to “PLAY” operation button and then press ENTER button (18) to program the playback.

Frequently asked questions

- I inserted a DVD disc, but it cannot be played. The message “REGION

ERROR” is displayed.

DVD players and discs all have “REGION

CODES”. If the region code number on the DVD disc does not correspond to the region number of this DVD player, the unit cannot play the disc.

- When I insert a DVD disc, there is a window shown on the screen that requires entering 4 characters

Work area A:

Work area B:

Work area C:

(1):

(2): folder list files list playback audio mode (default) viewing picture mode

(3): playback movie mode

Work area D: file information display work area A, B and C.

2. Press button.

▲/▼ button to select the desired folder or file of this work area.

3. Press ENTER button (18) to confirm the selected item.

4. In picture view or movie playback mode, if you want to return to the previous menu, press the ■ (STOP)

BV2950TU User ’s Manual - page 15

M e m o r y C a r d P l a y O p e r a t i o n

This disc player features a memory card slot (10).

Using the SD/MMC card:

When you insert a SD/MMC card into the

Memory card slot (10), the DVD player will read the SD/MMC card automatically.

The unit gives first playback priority to the card in the slot. If you insert a disc into the disc slot (7) while reading the

SD/MMC card, the unit will play the disc.

Press ■ (31) button to enter into PRE-

STOP mode, then press GOTO button

(30) to switch back to the card reading mode.

Note:

While reading the memory card, please don’t touch or take out the card. If the player is unable to read the card, please check if the card is in good condition. You may also wish to try removing the card fully from the reader, and reinserting it again.

U S B D e v i c e O p e r a t i o n

This disc player features a USB interface

(9). A USB device can be connected to this port.

Using the USB device:

When you insert a USB device into the

USB connector (9), the DVD player will read the USB automatically.

The unit will give priority to the USB device. If you insert a disc into the disc slot (7) or insert a SD/MMC card into the

SD/MMC interface (10) while read the

USB device, the unit will play the disc or the SD/MMC. Press ■ (31) to enter into

PRE-STOP mode, then press GOTO button (30) to switch to the reading USB mode.

Note:

When reading the USB device, please

BV2950TU User ’s Manual - page 16 don’t unplug the device. If the player is unable to read the device, please check if the device is in good condition. You may also wish to try removing the card fully from the port, and reinserting it again.

- The main unit can only support the standard USB-memory disc which is approved by Microsoft.

- USB MP3 player is not a "standard" which means different brand names or different models have their own standards. Therefore, this unit may not support every MP3 player.

- When connecting an MP3 player which has a normal battery in the player (non rechargeable battery), you should remove the battery from the MP3 player before you connect it to the USB port.

Otherwise, it may cause the battery to explode.

A V I N O p e r a t i o n

This disc player offers you the option of using the auxiliary front panel A/V input jack (8) to connect a video game, digital camera/camcorder or other video source you wish to use in your mobile video system.

T V O p e r a t i o n

To watch TV, press the MODE button (on the front panel or the remote) to enter TV mode.

Setting up TV Channels

Press the MENU button on the remote to enter the automatic channel search mode. Press the

: button and the TV tuner will begin scanning for available stations and store them in the tuner memory. When the tuner has finished scanning the TV band, press the 9 button.

Selecting a Viewing Channel

You can search either by using the

9 buttons to step up and down the TV and band, or use the numeric buttons on the remote keypad to directly enter the one or two digit channel number you wish to view (Please note: To enter a two digit channel, first press the GOTO button and then press the two digit channel number).

Adjusting TV Volume Level

To adjust the volume level, press the

VOL+/- buttons on the remote control.

Muting the Audio

To temporarily silence the TV sound, press the MUTE button on the remote.

Press it again to restore the prior volume level.

F M M o d u l a t o r O p e r a t i o n

Why use the built-in FM Modulator?

If the receiver you currently have in your vehicle lacks audio inputs, the built-in FM

Modulator of the BV2950TU offers an easy way to deliver the audio output from the BV2950TU to your car's audio system.

This powerful FM Modulator is designed to input directly to your car radio in the

FM band between 87.7MHz and

88.9MHz. This portion of the radio band

(the left end of the spectrum) has fewer stations present so is ideal for this purpose.

Selecting an operating frequency

To select an FM operating frequency, put the unit into DVD mode. Then press the

MENU button repeatedly to step through and select an FM frequency between

87.7MHz and 88.9MHz.

Tune your vehicle radio to this same frequency. If audio quality is good, set a radio preset button to this frequency your setup is complete!

If you experience interference or poor reception, try one of the other available frequencies. Be sure to change your radio to the new frequency you just set, and check the audio quality. Repeat this process until you achieve the best results.

BV2950TU User ’s Manual - page 17

S e t u p

In DVD mode, when the disc is playing or in stop mode, press SETUP button (19) to enter the Setup menu.

1. When the cursor is in the upper part of the menu, use ◄/► buttons to move between the different pages.

2. Press ▼ button to move the cursor to the setup page below. Then you can use the ▲/▼ buttons to move between the different setup options.

Press ► or ENTER button to move to the choice list of each setup option and then use ▲/▼ buttons and ENTER

(18) to change your selection.

button

4. When the setting is complete, press

SETUP button (19) to return to normal mode.

* When settings are changed, old settings are overwritten. Make note of the current settings before making changes. If the vehicle’s battery is disconnected, the settings will be cleared and will return to the factory settings when power is next applied.

S y s t e m S e t u p

When you open the setup menu, you will see the System Setup page first:

You can either choose AUTO SELECT, which will sense the type of monitor attached to the output and select NTSC or PAL as needed. If you know the type of monitor, you should choose the type in this menu rather than letting AUTO

SELECT do it for you. This is because there may be an undesirable small delay and some flickering of the screen during the AUTO-SELECT process.

SCREEN SAVER

As with computer monitor, video screens can “burn in” if a still image is displayed too long on the screen. This unit features a “screen saver” which produces a moving image to avoid burn-in, if

SCREEN SAVER is enabled in the Setup menu.

SETTING the TV TYPE

TV types can vary based on their aspect ratio. The common monitors fall into one of three categories:4:3 (PS/Pan and

Scan), 4:3 (LB /Letterbox) or 16:9 (

Widescreen). Playing a video recorded in one aspect ratio on a monitor with a different ratio can result in some mismatches and undesirable display distortion or cutoffs. Read the following to assist you in setting up the TV type:

4:3 PS (PAN SCAN)

Select this when connected to a conventional 4:3 size monitor. The picture will fill the entire TV screen.

However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible

(when playing a 16:9 size movie).

TV SYSTEM

TV SYSTEM is used to select the TV output mode. This player can play discs recorded in either PAL or NTSC formats.

Select NTSC format when the unit is connected to NTSC TV.

Select PAL format when the unit is connected to PAL TV.

BV2950TU User ’s Manual - page 18

4:3 (Pan and Scan) format is the factory default setting for this product.

4:3 (LETTER BOX)

When you are playing a widescreen format video on a normal (4:3) monitor, the best way to view this is in (4:3) letterbox format. You can see the full picture, but there will be a black band at the top and bottom of the screen.

16:9 (WIDESCREEN)

Select this when connected to a wide screen TV.

3) Press ▲/▼ then press button to select “

ENTER

RATING ” button. The restriction level (parental level) input display appears

4) Press ▲/▼ button to select the restriction level (1 to 8) and then press

ENTER button.

5) When the setting is complete, press

SETUP button to return to normal mode.

DEFAULT

Selecting DEFAULT and confirming it will restore all the System Settings to those programmed at the factory, except the

Parental Controls and Password.

L a n g u a g e S e t u p

When you open the language setup menu, you will see the language setup screen:

PASSWORD

The Password system is used in conjunction with the Parental Controls settings to prevent a young person from changing the settings without permission. The factory default password is 0000. If you wish to change this, enter

0000 and when prompted, enter a different 4-digit number.

PARENTAL CONTROL LEVEL

Use this function to restrict the viewing of movies to children of appropriate age levels only.

1) Press ▲/▼ then press button to select “ PASSWORD ”

ENTER button.

2) The password input mode is now activated. Use the numeric keypad “0” to

“9” to input the 4-digit password, and then press ENTER button. (The default password is “0000” upon shipment from the factory.)

There are many choices for the menu,

DVD and subtitle languages. You set the languages for the DVD player in different menus than the languages for playback and subtitling on the discs. Of course, options vary from disc to disc so some settings may not be available.

OSD LANGUAGE:

ENGLISH/GERMAN/SPANISH/FRENCH/

PORTUGUESE/ITALIAN/RUSSIAN/POLISH

AUDIO LANG:

ENGLISH/GERMAN/SPANISH/FRENCH/

PORTUGUESE/ITALIAN/RUSSIAN/POLISH

BV2950TU User ’s Manual - page 19

SUBTITLE LANG:

ENGLISH/GERMAN/SPANISH/FRENCH/

PORTUGUESE/ITALIAN/RUSSIAN/POLISH

MENU LANG:

ENGLISH/GERMAN/SPANISH/FRENCH/

PORTUGUESE/ITALIAN/RUSSIAN/POLISH

A u d i o S e t u p

When you open the AUDIO menu, you will see the following screen:

1) AUDIO OUT: Change among

SPDIF/OFF, SPDIF/RAW and

SPDIF/PCM.

2) KEY: Change among b, -4, -2, 0, +2,

+4, #.

D i g i t a l S e t u p

When you open the DIGITAL SETUP menu, you will see the DIGITAL SETUP screen:

1) OP MODE: Change among LINE

OUT/RF REMOD.

- LINE OUT: LINE OUT mode, with digital dialog normalization.

- RF REMOD: RF REMODULATION mode, with heavy compression and digital dialog normalization.

2). DYNAMIC RANGE: Change among

FULL, 6/8, 4/8, 2/8, OFF.

3). DUAL MONO: Change among

STEREO, MONO L, MONO R, MIX

MONO.

S p e c i f i c a t i o n s

1. Supply voltage:

Power Supply Requirements:

12V DC (11~15V), test voltage 14.4V, negative ground

Current consumption:

Less than 2 A

2. Signal system:

3. Discs played:

(1) DVD-VIDEO disc

(2)Compact disc (CD-DA/CD-R/CD-

RW/MP3)

(3) VIDEO CD

4. Audio output level:

10K

5. Audio signal output characteristics:

(1) Frequency response:

20Hz - 20 KHz

(2) S/N ratio:

80 dB(JIS)

(3) Wow and flutter:

Below measurable limits

6.FM Modulator:

Operating frequency range:

87.7MHz, 87.9MHz, 88.1MHz,

88.3MHz, 88.5MHz, 88.7MHz,

88.9MHz,

RF output level: 60dBu maximum

S/N ratio: 65dB

Stereo separation: 40dB

7.TV Tuner:

(1) Max sensitivity: 40dBu

(2) Color usable sensitivity: 45dBu

(3) Auto seek sensitivity: 40dBu

Note:

Specifications and design are subject to modification, without notice, due to improvements in technology.

BV2950TU User ’s Manual - page 20

T r o u b l e s h o o t i n g

If it appears that your DVD unit is faulty, please first consult this checklist. It may be that something simple has been overlooked.

Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player.

No Power

♦ If the power supply is connected to the car accessory circuits, but the engine is not turned on, switch the ignition key to

“ACC”.

♦ Check if the fuse is blown. Then replace with a new fuse.

♦ Check if the on/off button on the front of the player is set to on.

No Picture

♦ Check if the monitor or TV is switched on.

♦ Check if select proper mode has been selected such as Disc Play mode or AV mode.

♦ Check the video connection.

Distorted Picture

♦ Check the disc for fingerprints and clean it with soft cloth, wiping from center to the edge.

♦ Sometimes a small amount of picture distortion may be present. This is not a malfunction.

Completely Distorted Picture

♦ The disc format is not the same as the

TV-set used (PAL/NTSC).

No Color in Picture

♦ The disc format is not the same as the

TV-set used (PAL/NTSC).

Disc Does Not Play

♦ Be sure that the disc label faces up.

♦ Clean the disc.

♦ Check if the disc is defective by trying another disc.

No Sound

♦ Check the audio connections.

The Player Does Not Respond to the

Remote Control

♦ Aim the remote control directly at the sensor on the front of the player.

♦ Remove any obstacles which may interfere with the signal path.

♦ Inspect or replace the remote control battery.

Distorted or B/W Picture

♦ The disc format is not according to the

TV-set used (PAL/NTSC).

No Audio at Digital Output

♦ Check the digital connections.

♦ Check the Digital Audio menu to make sure that the digital output is correctly set.

♦ Check if the audio format of the selected audio language matches your receiver's capabilities.

Buttons Do Not Work

♦ Press Reset button on the front panel of the DVD unit.

BV2950TU User ’s Manual - page 21

A d d i t i o n a l I n f o r m a t i o n

About Parental Control

DVD discs have a parental level assigned to each disc. The range of parental controls is from 1 to 8. In general, this range corresponds to established movie rating systems. Movie rating systems may vary depending on the country you live in.

Toward the bottom of this page is a small chart showing the rating system and corresponding Parental Control ratings for the USA.

The player can be set in a similar way. If the player's parental level is set to 8 it will play all discs. If the player's parental level is set below 8, only discs with a lower or equal parental level will play.

For example if the player is set to 5, only discs with parental control ratings of 1-5 will play. To play a disc with higher number rating, you must change the player's rating to a higher number.

Consider a disc that is suitable for most audiences, and is rated as level 2 for the most part. However in the middle there are also scenes rated at 5 & 7 (not suitable for children). Alternative scenes with lower rating are included. The player plays the highest rated scene that the parental setting allows.

A section of the disc can have several different sequences that vary in parental control level. In the above example of a disc with parental control, the player will show a different section depending on the parental control level set in the player's menu.

In this way parents can control the content of films and there is no indication that any censorship has occurred.

Unlock

1 KID SAFE

2 G

3 PG

4 PG 13

Unlock

5 PG-R

6 R

7 NC-17

8 ADULT

About MP3

What is MP3?

MP3, whose official name is “MPEG-1 Audio

Layer 3,” is a compression standard prescribed by the ISO, the International standardization organization and MPEG which is a joint activity institution of the IEC.

MP3 files contain compressed audio data.

MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near-CD quality. The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds.

Corresponding file systems

This device supports discs formatted with

ISO9660 level 1 or level 2. Under the

ISO9660 standard, there are some restrictions to remember.

The maximum nested folder depth is 8

(including the root directory). The number of characters for a folder/file names are letters A-Z (all caps), numbers 0-9, and '_'

(underscore).

This device also can play back discs in

Joliet, Romeo, etc., and other standards that conform to ISO9660. However, sometimes the file names, folder names, etc., are not displayed correctly.

BV2950TU User ’s Manual - page 22

Notes

IB-005303-07-01

Salut! Sunt un chatbot AI special antrenat pentru a te ajuta cu Boss Audio Systems BV2950TU User Manual. Am analizat cu atenție documentul și te pot ajuta să găsești informațiile exacte de care ai nevoie sau să explic conținutul în termeni clari și simpli. Indiferent dacă ești în căutarea unui ghidaj privind anumite funcții, pași de depanare sau utilizare generală, nu ezita să pui întrebări. Cu cât oferi mai multe detalii despre preocupările sau nevoile tale, cu atât mai precis și eficient te pot ajuta!