Owner’s

Manual

HEAVY DUTY

UPRIGHT VACUUMS

CPU-1QD

CPU-1

CPU-1T

CPU-2

CPU-2T

OPERATING INSTRUCTIONS

COMMERCIAL

BACKPACK VACUUM CLEANERS

CONGRATULATIONS

YOU HAVE JUST ACQUIRED A HIGH QUALITY VACUUM

CLEANER. PLEASE READ THIS MANUAL CAREFULLY,

BEFORE OPERATING YOUR NEW VACUUM CLEANER.

KEEP MANUAL ON HAND FOR FUTURE REFERENCE.

Save These Instructions

Index

Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Polarization Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Grounding Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Parts Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Replacement Bags/Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

How to Assemble and Operate the Vacuum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

How to Change the Vacuum Bag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Handle Adjustments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

How to Change the Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

On-Board Tool Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Edge Cleaning Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Automatic Self-Adjusting Nozzle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Thermal Fuse Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Optional Cleaning Tools/Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

How to Replace the Vacuum Belt and Headlight Bulb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

How to Clean the Nozzle Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

For Best Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Customer’s Record

The model and serial number of this product may be found on the back of the unit. Register your Carpet Pro vacuum as soon as possible for your protection. Also, note the model and serial numbers of your unit in the spaces provided below, and retain this book as a permanent record of your purchase.

Model Number: ____________________________________________________________________________________

Serial Number: _____________________________________________________________________________________

Date Purchased: ____________________________________________________________________________________

Your vacuum cleaner is a product of high-quality materials and superior workmanship. We urge you to read these operating instructions carefully before you use this vacuum cleaner in order to obtain the full performance and satisfaction it can offer you.

Save These Instructions

Before you plug in your Carpet Pro vacuum cleaner, make sure the voltage indicated on the rating plate located on the back of the vacuum cleaner is the same as your local supply.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

When using an electrical appliance, basic precautions should always be followed, including the following:

SAVE THESE INSTRUCTIONS.

WARNING:

To reduce the risk of fire, electric shock or injury:

1. Do not leave appliance unattended when plugged in. Unplug from outlet when not in use and before servicing.

2. WARNING: ELECTRIC SHOCK COULD OCCUR IF USED OUTDOORS OR ON WET SURFACES.

3. Do not allow to be used as a toy. Close attention is necessary when used by or near children.

4. Use only as described in this manual. Use only manufacturer’s recommended attachments.

5. Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors or dropped into water, return it to a service center. Wrapping the cord too tightly puts stress on the cord and can cause cord damage. A damaged cord is an electrical shock hazard and could cause personal injury or damage.

6. WARNING: The replacement or repair of damaged wiring should only be performed by a qualified electrician or service engineer from the original distributor or authorized service agent.

7. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

8. Do not unplug by pulling on cord. To unplug, grasp the plug and pull straight out of electrical outlet.

9. Do not handle plug or appliance with wet hands.

10. Turn off all controls before unplugging.

11. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair and anything that may reduce air flow.

12. Keep hair, loose clothing, fingers and all parts of the body away from openings and moving parts.

13. Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.

14. Do not use without vacuum bag and filters in place.

15. Use extra care when cleaning on stairs.

16. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present.

17. Do not attempt to service the unit while appliance is plugged in.

18. Do not allow vacuum cleaner to remain in one spot for any length of time when the brushroll is turning. Damage to carpet may occur.

19. Do not touch the brushroll when vacuum cleaner is on.

20. For grounded three-wire polarized plug models, connect to a properly grounded outlet only. See

Polarization Instructions on page 3.

MODELS: CPU-1QD, CPU-1 and CPU-1T

This product is equipped with a polarized alternating

WARNING - The replacement or repair of damaged wiring should only be performed by a qualified electrician or service engineer from the original distributor or authorized service agent

Grounding Instructions

MODELS: CPU-2 and CPU-2T

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This appliance is for use on a nominal 120 volt circuit and has a grounding attachment plug that looks like the plug illustrated in Fig. 1. Make sure that the appliance is connected to an outlet having the same configuration as the plug. No adapter should be used with this appliance.

WARNING - Improper connection of the equipmentgrounding conductor can result in a risk of electric shock.

Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded.

Do not modify the plug provided with the appliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Fig. 1

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

3

3

Parts Identification

Model CPU-1QD

Handle grip

Hose hanger

Quick cord release

Hose handle Handle tube

Cord storage hooks

Power cord

Telescopic wand

On/Off switch

Bag compartment cover latch

Easy-carry handle

Bag compartment Accessory attachment opening

Quick clean-out port

Nozzle hose

Tools

Quick clean-out port

Furniture

guard

Headlight

Self-adjusting nozzle

Foot pedal release

Thermal reset button

Thermal reset instructions

Replacement Bags and Filters

Nozzle hose

• Genuine Carpet Pro Vacuum Bags

Part # CPP-3

3 per package

• Genuine Carpet Pro Post Filter

Part # 06.812

1 per package

• Genuine Carpet Pro Electrostatic Secondary Filter

Part # 06.317

1 per package

• Genuine Carpet Pro Foam Secondary Filter

Part # 06.611

1 per package

4

Parts Identification

Models CPU-1, CPU-1T, CPU-2 and CPU-2T

Handle grip

Quick cord release

Handle tube

Power cord

Cord storage hooks

On/Off switch

Bag compartment cover latch

Bag compartment

Easy-carry handle

Accessory attachment opening

Tools

(CPU-1T and

CPU-2T only)

Nozzle hose

Furniture

guard

Nozzle hose

Headlight

(CPU-1T and

CPU-2T only)

Foot pedal release

Self-adjusting nozzle

Thermal reset button

Thermal reset instructions

Replacement Bags and Filters

• Genuine Carpet Pro Vacuum Bags

Part # CPP-3

3 per package

• Genuine Carpet Pro Electrostatic Secondary Filter

Part # 06.317

1 per package

• Genuine Carpet Pro Post Filter

Part # 06.812

1 per package

• Genuine Carpet Pro Foam Secondary Filter

Part # 06.611

1 per package

5

How to Assemble and Operate the Vacuum

How to Attach the Handle to the Vacuum Cleaner

The vacuum cleaner and the handle are packed separately.

1. After first removing the handle screw, insert handle into the hole on top of the vacuum cleaner. Make sure that the cord hooks on the handle are positioned to the back of the vacuum cleaner (Fig. 1).

2. Line up the small hole on the handle with the small hole on the vacuum cleaner and insert the screw. Make sure the screw is tightened securely.

3. Turn the upper cord storage hook to the upright position and wind the power cord around the cord storage hooks when storing the vacuum cleaner (Fig. 2).

How to Release the Power Cord

1. The upper cord storage hook has a quick-release action. To release the cord, rotate the hook downward and the cord will drop off the handle for immediate use (Fig. 3).

2. Return the hook to the upright position before attempting to rewind the cord.

On/Off Switch (Fig. 4)

Fig. 1

1. To turn the vacuum on, push the switch located on the dust compartment to the ( I ) position.

2. To turn the vacuum off, push the switch located on the dust compartment on the ( 0 ) position.

Fig. 3

How to Change the Vacuum Bag

Fig. 2

Fig. 4

Always operate the vacuum cleaner with a vacuum bag installed.

Bags should be changed when they are 2/3 full.

How to Change the Vacuum Bag

1. Unplug the vacuum cleaner. Remove the bag compartment cover and remove the used bag from the bag holder (Fig. 1).

2. Attach the new vacuum bag onto the bag holder (Fig. 2).

3. Pull the bottom corners of the new vacuum bag (Fig. 3).

4. Reinsert the tabs on the end of the bag compartment cover into the grooves on the bag compartment housing. Press it into place and fasten the bag compartment cover latch tightly (Fig. 4).

Fig. 1 Fig. 2

Fig. 3 Fig. 4

6

Handle Adjustments

The handle on this vacuum cleaner can be set to one of three positions – upright, middle or low.

How to Adjust the Handle

1. To release the handle, step on the foot pedal release on the left rear corner of the vacuum cleaner (Fig. 1).

2. Upright position – for when cleaning tools are being used or for storage (Fig 2).

Handle locks in this position.

3. Middle position – for normal cleaning (Fig. 3).

4. Low position* – for cleaning under furniture (Fig. 4).

Fig. 1

* Once the vacuum is in the middle position, press the foot pedal again and recline the handle further to place the vacuum in the low position.

Fig. 2 Fig. 3 Fig. 4

How to Change the Filters

Your Carpet Pro vacuum cleaner is equipped with a secondary filter and a post filter. These filters capture fine dust particles and protect the motor from dirt. It is important to change the filters regularly — approximately once a year, or as needed.

To Change the Secondary Filter

1. Unplug the vacuum cleaner. Lift the latch to remove the bag compartment cover and remove the bag.

2. Remove the secondary filter and replace with a new filter (Fig. 5).

3. Replace the bag and bag compartment cover.

To Change the Post Filter

1. Unplug the vacuum cleaner. Lift the latch to remove the bag compartment cover.

2. Remove the foam filter from the front of the bag compartment (Fig. 6).

3. DO NOT THROW AWAY THE FILTER HOLDER.

4. Insert a new filter and replace the bag compartment cover.

Fig. 5

Fig. 6

7

On-Board Tool Cleaning

Model: CPU-1T & CPU-2T

This model is equipped with on-board cleaning tools including a wand, stretch hose, dusting brush and a crevice tool.

1. Remove the stretch hose from the nozzle of the vacuum (Fig. 1).

2. Attach any of the on-board tools to the end of the hose if you do not need the wand (Fig. 2).

3. Or attach the wand to the end of the hose and add any of the on-board tools to the end of the wand (Fig. 3).

Fig. 1

Model: CPU-1QD

This model is equipped with on-board cleaning tools including an in-line metal telescopic wand, stretch hose, dusting brush and a crevice tool.

1. To use the cleaning tools, lift the hose handle straight up from the vacuum (Fig. 4).

2. Extend the wand by pulling the button back and pushing the end of the wand forward (Fig. 5).

Fig. 2 Fig. 3

3. Attach any of the on-board tools to the end of the wand or if you do not need the wand, remove the wand and any tool can be connected directly onto the hose handle.

Fig. 4

Edge Cleaning Feature

Fig. 5

The edge cleaning feature provides improved cleaning of carpets near walls and stationary furniture. For maximum edge cleaning, position the right side of the vacuum (from the user’s perspective) near walls or stationary furniture.

Automatic Self-Adjusting Nozzle

Your Carpet Pro vacuum cleaner is designed with an automatic self-adjusting nozzle. No manual adjustments are required. The height of the nozzle is instantly and automatically adjusted to carpet pile height. This selfadjusting feature allows the nozzle to float evenly over all carpet pile surfaces.

8

Thermal Fuse Protection

Your Carpet Pro vacuum cleaner comes equipped with a Manual Reset Thermal Fuse Protector. This thermal protector is designed to protect your vacuum cleaner from overheating due to a cutoff in airflow (i.e. clogged hose, operating the vacuum without a bag). Should this situation occur, the thermal fuse protector will safely shut off your vacuum cleaner to avoid any potential damage.

Models: CPU-1QD, CPU-1 and CPU-1T

NOTE: To determine if it was the thermal fuse protector that turned off your vacuum cleaner and not some other reason, please refer to the vacuum cleaner’s headlight. If the headlight is on while the motor is off, then the thermal fuse did safely shut down the motor. If the headlight and motor are off, then there is some reason other than the thermal protector (i.e. pulled plug) the vacuum cleaner has shut down.

To Reset the Thermal Fuse

1. Unplug the vacuum cleaner.

2. Check for problem (over-filled bag, clog in hose, clogged filters, etc.).

3. Correct problem.

4. Locate “tripped” fuse — the small red or white button located on the lower left side on the back of the main body (roughly one inch to the right of the left wheel).

5. Using a pencil, paper clip, or other pointy object, push the reset button.

6. Plug vacuum cleaner in and begin using.

Please return to a Carpet Pro Service Center if the problem continues or if you have any questions.

Optional Cleaning Tools/Accessories

7-Piece Deluxe Attachment Kit Part #05.119 (Fig. 1)

15-foot crushproof hose with curved handle

Extension wand (2 pieces)

Dusting brush

Crevice tool

Upholstery tool

Upholstery brush insert

Deluxe floor brush Fig. 1

6- Piece Standard Attachment Kit #05.123 (Fig. 2)

7-foot hose with curved handle

Extension wand (2 pieces)

Dusting brush

Crevice tool

Upholstery tool

Upholstery brush insert

Connecting the Hose Assembly to the Vacuum Cleaner

Open the lid located on the back side of the vacuum cleaner and insert the plastic end of the hose assembly into the accessory attachment opening (Fig. 3). Attach wands and tools to the hose handle as needed.

9

Fig. 2

Fig. 3

How to Replace the Vacuum Belt

CAUTION: Unplug the vacuum cleaner before performing any of these steps.

How to Remove the Bottom Plate

1. Place the vacuum cleaner in the low position by pressing the foot pedal release twice while reclining the handle. Turn the vacuum over.

2. Remove the two screws holding the bottom plate in place (Fig. 1).

3. Remove the bottom plate.

How to Replace the Belt

1. Turn the vacuum cleaner over and remove the bottom plate as described in the above section.

2. Remove the belt guard (Fig. 2). Remove the brushroll by pulling it straight out (Fig. 3).

3. Remove the belt from the brushroll.

4. Loop a new belt over the motor pulley (Fig. 4) and over the end of the brushroll.

5. Stretch the belt while inserting the brushroll back into the nozzle housing.

6. Reinsert the belt guard.

7. Spin the brushroll by hand to make sure it turns smoothly and the new belt is properly aligned.

8. Replace the bottom plate by hooking the front end of the plate into the two ribs on the front end of the nozzle housing. Press the bottom plate into place and fasten it with the two screws.

NOTE: To ensure maximum cleaning efficiency, check the belt regularly to ensure it is in good condition. Replace the belt if it is stretched, cracked or if excessive slipping is occurring.

Fig. 1

Fig. 2

Fig. 3

How to Replace the Headlight Bulb

How to Replace the Headlight Bulb (Fig. 5)

CPU-1QD, CPU-1 and CPU-1T models only

1. Turn the vacuum cleaner over and remove the bottom plate as described in the above section.

2. To remove the bulb, grasp it gently and pull it straight out.

3. Install a new bulb by pushing it straight into the socket.

4. Replace the bottom plate as described in the above section.

10

Fig. 4

Fig. 5

How to Clean the Nozzle Hose

CAUTION: Unplug the vacuum cleaner before performing any of these steps.

The nozzle hose carries the dirt from the nozzle to the vacuum bag.

If the hose should become clogged:

Models: CPU-1, CPU-1T, CPU-2 and CPU-2T

1. Pull out and turn the lid of the accessory attachment opening.

Remove the clog or blockage (Fig. 1).

2. If the above step is not enough, remove hose cuff from the attachment port inlet (Fig. 2). If you haven’t located the clog, turn the vacuum cleaner over and remove the bottom plate (see “How To

Remove Bottom Plate”). Check nozzle inlet tube for obstructions

(Fig. 3). Clear tube and reinstall the bottom plate.

Model: CPU-1QD

1. Remove the wand from the wand/hose holder as shown on page 8.

2. Squeeze the tabs on both sides of the quick clean-out port and pull away from the vacuum (Fig. 4)

3. Check above and below the port opening for obstructions.

4. Remove any obstructions.

5. Replace the quick clean-out port by squeezing both tabs and pushing the hose back into the wand/hose holder. Replace the wand.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

11

Troubleshooting

PROBLEM POSSIBLE REASON

Vacuum won’t turn on • Power cord not firmly plugged in

• Blown fuse or tripped breaker

• Needs service

Vacuum won’t pick up or low suction

• Vacuum bag full

• Clogged filter

• Hose clogged

Dust escaping from vacuum

• Bag compartment cover not installed properly

• Filter not installed correctly

• Vacuum bag not installed correctly

POSSIBLE SOLUTION

• Plug unit in firmly

• Check house fuse or breaker. Replace fuse / reset breaker

• Take to a Carpet Pro

Service Center

• Install new bag

• Install new filter

• Remove obstacle

• Reinsert the cover and secure latch

• Review filter installation

(page 7)

• Review bag installation

(page 6)

All other service should be performed at a Carpet Pro service center.

For Best Performance

• Keep machine and all accessories clean and in good operating condition.

• Change vacuum bags when they are 2/3 full to maintain optimum cleaning efficiency.

• Change filters when dirt is visible on them or every six months if someone in your home suffers from allergies. Otherwise, once a year should do for replacing the filters.

• Always use genuine bags, filters and parts, as use of other products may result in poor cleaning or filtration performance. Carpet Pro filtration products are designed for maximum performance.

• Store machine carefully in dry area.

• For optimum cleaning performance and safety, follow your owner’s manual.

12

Warranty

What Is Covered:

This warranty covers any defects in material and workmanship in your new Carpet Pro vacuum.

How Long Coverage Lasts:

Warranty coverage for the Carpet Pro vacuum lasts one year. Household models used commercially are only warranted for 90 days.

What Is Not Covered:

• Damage to the vacuum that occurs from neglect, abuse, alterations, accident, misuse or improper maintenance.

• Normal replacement items: disposable vacuum bags, disposable filters and belts.

What Carpet Pro Will Do:

This warranty provides, at no cost to you, all labor and parts to keep this vacuum in proper operating condition during the warranted period.

How to Get Service:

Warranty service can only be obtained by presenting the vacuum to a Carpet Pro Service Center. A proof-ofpurchase and product serial number will be required before service is rendered.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER WARRANTIES WHETHER WRITTEN, ORAL,

EXPRESSED OR IMPLIED, (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE). THIS WARRANTY DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

How State Law Applies:

This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

13

© 2017 Carpet Pro Vacuum Cleaners

Carpet Pro Vacuum Cleaners

PO Box 730

Fenton, MO 63026