Xiamen HT300, HT330 User Manual
Xiamen HT300 is a versatile label printer designed for various applications. With its compact size and high-resolution printing, it's ideal for creating custom labels, tags, and receipts. It features multiple connectivity options, including USB and optional Bluetooth or Wi-Fi, allowing seamless integration with different devices. The HT300 supports a wide range of media types and widths, making it suitable for various industries and tasks. Its user-friendly operation panel and intuitive software ensure easy setup and operation.
Advertisement
Advertisement
Label Printer
User Manual
HT300
HT330
Xiamen Hanin Electronic Technology Co.,Ltd
ADD: Room 305A,Angye Building,Pioneering Park,
Torch High-tech Zone,Xiamen,China.
Tel.:
Fax:
Web:
+86-(0)592-5885993
+86-(0)592-5885992 www.hprt.com
Contents
Manual Information ........................................................................................................................
1
Important Safety Instructions .........................................................................................................
2
Chapter 1 Introduction ...................................................................................................................
5
1.1 Packing List .........................................................................................................................
5
1.2 Appearance and Components ...........................................................................................
6
1.3 Dimension ..........................................................................................................................
8
Chapter 2 Specifications .................................................................................................................
9
Chapter 3 Installation & Usage .....................................................................................................
11
3.1 Media Loading .................................................................................................................
11
3.2 Power Connection ............................................................................................................
16
3.3 Peripherals Connection ....................................................................................................
17
3.4 Detection ..........................................................................................................................
18
3.5 Operation Panel ...............................................................................................................
27
3.6 Basic Operation ................................................................................................................
29
Chapter 4 Interface .......................................................................................................................
31
4.1 USB Interface ...................................................................................................................
31
4.2 Other Optional Interfaces ................................................................................................
32
Chapter 5 Maintenance & Adjustment .........................................................................................
34
5.1 Cleaning Media Sensor ....................................................................................................
34
5.2 Cleaning Thermal Print Head ...........................................................................................
34
5.3 Cleaning Roller and/or Paper Path ...................................................................................
35
Chapter 6 Label Printer Utility Instructions ..................................................................................
36
6.1 Installation Preparation ...................................................................................................
36
6.2 Usage ................................................................................................................................
36
Chapter 7 Seagull Windows Driver Instructions ...........................................................................
46
7.1 Introduction .....................................................................................................................
46
7.2 Installation Preparation ...................................................................................................
46
7.3 Installation .......................................................................................................................
47
7.4 Usage ................................................................................................................................
52
7.5 Label’s Width ....................................................................................................................
68
Chapter 8 BarTender® Ultralite Instructions .................................................................................
69
8.1 Introduction .....................................................................................................................
69
8.2 Installation Preparation ...................................................................................................
69
8.3 Installation .......................................................................................................................
70
8.4 Usage ................................................................................................................................
74
HT300/HT330 User Manual
Statement
This manual content may be altered without permission, and our company reserves the rights to make changes without notice in technology, spare parts, hardware and software of the products. If more information is needed about the products, please contact our company.
Without any written permission from our company, any section of this manual is prohibited to be copied or transferred in any form.
Copyright
This manual is printed in 2016, the copyright belongs to Xiamen Hanin Electronic Technology
Co. Ltd.
Printed in China
1.0 Version
Warnings
This must be complied with in order to avoid any damage to the human body and the equipment.
This is showing the important information and tips for the printer operation.
Note: Due to continuous update of our product, the description of printer specification, accessories, design in this manual may be slightly different. Please keep in kind prevail.
Manual Information
This user manual contains basic information for product usage as well as for emergency measures that may be required.
The installation and usage of printer driver, utility tool and HPRT BarTender® Ultralite are also included in the manual.
1
HT300/HT330 User Manual
Important Safety Instructions
Before using the present appliance, please carefully read the following safety regulations in order to prevent any hazard or material damage.
1.Safety warning
Warnings: The print head will become very hot during printing; avoid contact with the print head after printing has finished.
Warnings: Do not touch the printer head and connector in case static damage the printer head.
2.Instructions
Warnings: Violating following instructions may cause serious injury or death.
1) Do not plug several products in one multiperture outlet.
• This can provoke over-heating and a fire.
• If the plug is wet or dirty, dry or wipe it before usage.
• If the plug does not fit perfectly with the outlet, do not plug in.
• Be sure to use only standardized multiperture outlet.
2) You must use the supplied adapter.
• It is dangerous to use other adapters.
3) Do not pull the cable to unplug.
• This may damage the cable, which is the origin of a fire or a breakdown of the printer.
4) Do not plug in or unplug with your wet hands .
• You may be electrocuted.
5) Do not bend the cable by force or leave it under any heavy object.
• A damaged cable may cause a fire.
2
HT300/HT330 User Manual
Caution: Violating following instructions may cause slight damage of the appliance.
1) If you observe a strange smoke, odour or noise from the printer, unplug it before taking following measures.
• Switch off the printer and unplug the set from the mains.
• After the disappearance of the smoke, call your dealer to repair it.
2) Install the printer on the stable surface.
• If the printer falls down, it may be broken and you may hurt yourself.
3) Use the approved accessories only and do not try to disassemble, repair or remodel it by yourself.
• Call your dealer when you need these services.
• Do not touch the blade of auto cutter.
4) Do not let water or other foreign objects drop into the printer.
• If this happened, switch off and unplug the printer before calling your dealer.
5) Do not use the printer when it is out of order. This can cause a fire or an electrocution.
• Switch off and unplug the printer before calling your dealer.
6) Other considerations:
• Place the printer on a solid and even base so that it cannot fall.
• Leave enough space around printer for operation and maintenance.
• Keep all liquids away from the printer.
• Do not expose the printer to high temperatures, direct sunlight or dust.
• Ensure the printer is connected to a socket with the correct mains voltage.
• Switch off the printer POWER supply when it’s not in use for a long time.
• To ensure the printing quality and reliability, suggest use the same quality or recommend paper supplier.
• Pls. switch off the POWER supply when connect/disconnect all the ports or it will cause damage to the printer control circuit.
• Never carry out maintenance or repair work yourself. Always contact a qualified service
Technician.
3
HT300/HT330 User Manual
• Keep this User Manual in a place which is easily accessible at all times.
3.Other Precautions
The copyright for this user manual and various other manuals is property of our company. Any copying or conversion into electronic form and saving of this material without the express written permission is strictly prohibited. Use of the information contained in this manual is not subject to any patent liability. This manual has been prepared with utmost care and attention to detail but may contain certain errors and/or omissions. Our company is not legally liable for any damages resulting from the use of the information in this manual. Our company and its affiliates are not legally liable (United States excluded) for any damages, loss, costs, and/or expenses that result from the breakdown, malfunction, and/or misuse of the product due to violation or neglect of the operation and maintenance information and instructions provided by our company, as well as from the unauthorized alteration, repair, and/or modification of the product by the user and/or third party. We are not legally liable for any damages and/or issues resulting from the use of options and/or parts that are not authentic or authorized products.
4.WEEE (Waste Electrical and Electric Equipment)
This mark shown on the product or its literature indicates that the corresponding item should not be discarded at the end of its working life with other household waste. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate marked items from other types of waste and recycle them responsibly to promote the sustained reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office for details of where and how they can conduct environmentally safe recycling of such items. Commercial users should contact their suppliers and check the terms and conditions of purchase contracts. This product should not be combined with other commercial waste for disposal.
Caution: This is a Class A product. In a domestic environment this product may cause radio interference in which the user may be required to take adequate measures .
4
HT300/HT330 User Manual
Chapter 1 Introduction
1.1 Packing List
Note:
1.Unpack the printer and keep the packing materials in case you need to ship the printer in the future.
2.Any damages exist, please contact the local dealer.
Printer AC Adapter Power Cord
USB Cable Empty Ribbon Core Ribbon
Label Supply Spindle Label Supply Plates Ribbon Spindles
Label Roll CD
Rev.1.0
Note ： The packing materials are actually based on the order.
Quick Start Guide
5
1.2 Appearance and Components
￭ Front View
HT300/HT330 User Manual
￭ Rear View
Rev.1.0
6
￭ Inside View
HT300/HT330 User Manual
Rev.1.0
Note ： The views above are for your reference. Ports vary by your choice.
7
1.3 Dimension
HT300/HT330 User Manual
Rev.1.0
8
HT300/HT330 User Manual
Printing
Processor
Memory
Detection
Items
Chapter 2 Specifications
Printing method
Resolution
Printing speed
Printing width
Printing length
RAM
Flash
Sensors
Types
(2/1)
Parameter
HT300
Thermal transfer
/ Direct thermal
203dpi(8dots/mm)
127mm/s Max.
108mm Max.
15mm - 1200mm
NUC976
HT330
Thermal transfer
/Direct thermal
300dpi(11.8dots/mm)
102mm/s Max.
106mm Max.
15mm - 1200mm
32MB
16MB
Adjustable reflective sensor,Fixed transmissive sensor(Central aligned), Head-up sensor, Ribbon end sensor
Roll-fed or Fan-fed,Die-cut or Continuous label,Tag stock,Continuous receipt paper
0.79’’(20mm) – 4.65’’(118mm)
0.003’’(80um) – 0.007’’(180um) Media
Width
Thickness
Label diameter
Core diameter roll
Ribbon
Types
Width
Length
Core diameter
Programming Language
Software
Label design
Seagull Driver
Resident Fonts
Bitmap fonts
TTF fonts
5’’(127mm)
1’’(25.4mm),1.5’’(38mm),3’’(76.2mm)
Wax,Wax/Resin,Resin
1.33’’(33.8mm) – 4.33’’(110mm)
984’(300m)
1’’(25.4mm)
TSPL, ZPL
HPRT BarTender Ultralite
Windows 2000,XP,Vista,7,8,10
Fonts 0-8 / Fonts A-H,0,GS,P-V 90 ° , 180 ° , 270 ° rotatable. 10 times maximun expandable in horizontal and vertical directions.
Monotype CG Triumvirate™ scalable true type font
Rev.1.0
9
HT300/HT330 User Manual
Download Fonts
Items
Bitmap fonts
Asian fonts
(2/2)
Parameter
90°, 180°, 270° rotatable, single characters 90°, 180°,
270° rotatable
16x16, 24x24. Traditional Chinese, Simplified
Chinese, Japanese , Korean
Code Pages
Barcode
Interfaces
Control Panel
Power
Environment
Physical
Characteristics
Options & Accessories
Agency Approvals
1D
2D
Standard
Optional
Operation
Storage
Dimension(L*W*
H)
Weight
DOS437,720,737,755,775,850,852,855,856,857,858,8
60,862,863,864,865,866,
Windows
1250,1251,1252,1253,1254,1255,1256,1257,1258
ISO8859-1,-2,-3,-4,-5,-6,-8,-9,-15
DBCS 932 (JIS), 936(GBK), 949 (Koran), 950(BIG5)
Code 39, Code 93, Code 128UCC, Code 128 subset A,
B, C, Codabar, Interleave 2 of 5, EAN-8, EAN-13,
EAN-128,
UPC-A, UPC-E, EAN and UPC 2 (5) digits add-on, MSI,
PLESSEY, POSTNET, RSS-Stacked, GS1 DataBar, Code
11
PDF417, Maxicode, DataMatrix, QR Code, Aztec
USB,RS232,Ethernet
Bluetooth,WiFi (user install)
Two bi-color status LEDs:Ready,Status
Control key:Feed
AC/DC switching power adapter
I/P: AC100-240V, 50/60Hz, O/P: DC 24V/2.5A
41
-4
℉
℉
(5 ℃
(-20
)-104
℃
℉
)-122
285*226*171mm
(40
℉
℃
(50
)
℃
，
)
30%-85%,non-condensing
， 10%-90%,non-condensing
2.26kg,excluding consumables
External label roll holder for 8’’ (203mm) OD label rolls
Cutter module
Peeler module
FCC,CE
Rev.1.0
10
HT300/HT330 User Manual
Chapter 3 Installation & Usage
3.1 Media Loading
3.1.1 Paper Roll Loading
1.Press the cover open buttons and lift the printer cover.
2.
Release the latches and lift the printer mechanism.
Rev.1.0
11
HT300/HT330 User Manual
3.Put the roll into label supply spindle and then put the roll module into the printer.
4.Release and lift the printer mechanism. Then pass the labels through label guides and adjust label guides to label’s width.
Note: If your printer is under Thermal Line Printing Method, press down the printer cover until it snaps closed. Otherwise, continue the procedure in chapter 3.1.2.
Rev.1.0
12
HT300/HT330 User Manual
3.1.2 Ribbon Loading
1.After putting the ribbon into spindle, insert the left side of supply module into supply wheel, and then insert the right side into the groove below.
2.After putting empty ribbon core into spindle, insert the left side of rewind module into rewind wheel, and then insert the right side into the groove above.
Rev.1.0
13
HT300/HT330 User Manual
3.Pull up the ribbon and stick it to the empty ribbon core. Wind the core 2~3 circles until the ribbon is pulled tightly.
4.Fix the mechanism and then close the cover.
Rev.1.0
14
3.1.3 External Paper Roll Loading
If the paper roll is extremely large, users can load the paper roll outside(See the graph at right). Pass the paper through the external feed slot and then through the paper guides.
Adjust the paper guides
HT300/HT330 User Manual
Rev.1.0
15
3.2 Power Connection
1. Make sure the printer’s power switch is in the off position.
2. Connect the AC adapter to power receptacle.
3. Connect the power cord to AC adapter.
4. Connect the other end of power cord to the outlet.
HT300/HT330 User Manual
NOTE:
Use the original power adapter only. Avoid the damage caused by charging improperly.
Please unplug the printer power cord if it is not in use for a long time.
Rev.1.0
16
HT300/HT330 User Manual
3.3 Peripherals Connection
3.3.1 Interface Cable Connection
The standard for the printer’s interface cable shows in the following.
-- USB B-Type Cable
-- RS-232C(Serial) Cable
-- RJ45 Cable
Please follow the instructions to connect the cable.
1) Turn off the power switch.
2) Connect the communication cable to the printer communication port to be used.
-- Connect USB B-Type cable to the USB port.
-- Connect the RS-232C(Serial) cable to the serial port.
-- Connect the RJ45 cable to the ethernet port.
3.3.2 Bluetooth Connection
PDA with Bluetooth interface, laptop and other information terminals can drive the mobile thermal printer HT300 or HT330. Instructions as follows:
1. Power on printer.
2. Primary device search for outer Bluetooth devices.
3. If there are some outer Bluetooth devices, choose HT300 or HT330.
4. Finish pairing.
Detailed pairing methods, please refer to primary devices Bluetooth Names.
After pairing, primary devices with virtual Bluetooth interface (smart phone , pocket PC, palm, notebook) can drive mobile thermal printer HT300 or HT330 to printer through such virtual Bluetooth interface.
Note: The original code is 1234.
Rev.1.0
17
HT300/HT330 User Manual
3.4 Detection
When printing paper, the moveable label sensor is used to detect paper. The label sensor moves differently when using various kinds of paper. If user moves the sensor improperly, paper may not be detected, therefore the printer could not print paper. The following instructions tell users how to use label sensor correctly. Please read it carefully.
3.4.1 Continuous Paper
When printing continuous paper(Figure 1), the sensor shall be aimed at the left photoelectric hole (Figure 2), which is the original position.
Figure 1 (Continuous Paper)
Rev.1.0
18
HT300/HT330 User Manual
Rev.1.0
Figure 2 (Left)
19
HT300/HT330 User Manual
3.4.2 Double-row Labels
When printing double-row labels(Figure 3), the sensor shall be aimed at the left photoelectric hole (Figure 4), which is the original position.
Figure 3 (Double-row Labels)
Rev.1.0
20
HT300/HT330 User Manual
Rev.1.0
Figure 4 (Left)
21
HT300/HT330 User Manual
3.4.3 Punched Hole Label
When printing punched hole labels, move the sensor until it’s aimed at the right photoelectric hole(Figure 5).
Rev.1.0
Figure 5 (Right)
22
HT300/HT330 User Manual
3.4.4 Label
When printing labels (thermal label/label)(Figure 6), the sensor shall be aimed at the left photoelectric hole (Figure 7), which is the original position.
Figure 6 (Labels)
Rev.1.0
23
HT300/HT330 User Manual
Rev.1.0
Figure 7 (Left)
24
HT300/HT330 User Manual
3.4.5 Blackmark Paper
When printing blackmark paper(Figure 8), the sensor shall be aimed at the position of black mark(Figure 9).
Figure 8 (Blackmark Paper)
Rev.1.0
25
HT300/HT330 User Manual
Figure 9 (aimed at blackmark’s position)
Rev.1.0
26
3.5 Operation Panel
HT300/HT330 User Manual
Rev.1.0
27
HT300/HT330 User Manual
Orange
Orange
X
X
X
X
Description of indicator status:
Ready
Color
Green
Action
Lit on
Color
X
Status
Action
X
Green
Red
Red
X
X
X
Slow flash
Lit on
Slow flash
X
X
X
X
X
X
Red
Red
Red
X
X
X
Lit on
Slow flash
Quick flash
Lit on
Quick flash
X
X
X
X
X
X
Orange
Green
Green
Green
X
X
Slow flash
Lit on
Slow flash
Quick flash
Indicator Status
Ready
Dump mode
Overheat of printhead
Ribbon out
Head up
Paper out
Abnormal label calibration
Out of ready
Data is written on flash
Paper jam or label’s separation
Printing
Pause of printing
Receiving data
Rev.1.0
28
HT300/HT330 User Manual
3.6 Basic Operation
3.6.1 Power on/power off
Press “O” to power off the printer. Press “l”to power on the printer.
3.6.2 Feed Button
Pressing FEED button, printer will feed paper to the specified position according to the paper type. When using continuous paper, pressing FEED button once will feed the fixed distance.
When using labels, pressing FEED button once will feed a whole label.
3.6.3 Quick Calibration
Note : Users must carry out the calibration under the conditions below:
The first time to use the printer since installation;
The first time to use the printer since sensor cleaning;
Reuse the printer when it has not been used for a long time;
Change a new type of media;
Printer cannot recognize the mark;
Huge change of the operating environment;
Calibration method :
1.Carry out the calibration manually.
When printer is ready, press the FEED button until the status indicator(Green) flashes twice.
Then release the button, and printer will start to do the calibration. When printer does the calibration under Continuous Media Mode, the calibration is invalid.
2.Carry out the calibration by printer utility tool. Please refer to detailed information in
“Chapter 6 Label Printer Utility Instructions”.
Caution: After the calibration, users could open the printer cover to pull back the learned paper in avoid of paper wasting.
Rev.1.0
29
HT300/HT330 User Manual
3.6.4 Printing Self-test Page
The self-test checks the printer’s current settings, status and whether the printer has any problems or not.
1.Printing Manually
1) Make sure the roll is loaded properly.
2) Make sure the top cover and mechanism of the printer are closed properly. Then turn on the printer.
3) When the printer is ready, press the feed button continuously. As soon as the indicator flashes (green) once, loosen the button. Then the printer starts to print the self-test page.
2.Printing by Windows Driver Program
1) Install the Windows Driver program.
2) Please set the “Interface” as the type you use.
3) Use the Windows Driver Program to print out the “Self-test page”.
4) Please refer to “Chapter 7 Seagull Windows Driver Instructions” for more detailed information.
3.Printing by HPRT BarTender Ultralite Program
1) Install the HPRT BarTender Ultralite program.
2) Edit a new label and print it.
3) Please refer to “Chapter 8 BarTender® Ultralite Instructions” for more detailed information.
Rev.1.0
30
4.1 USB Interface
Chapter 4 Interface
HT300/HT330 User Manual
PIN
1
2
3
4
SIGNAL NAME
VBUS
D-
D+
GND
Rev.1.0
31
4.2 Other Optional Interfaces
Serial Port
PIN
7
8
5
6
9
3
4
1
2
SIGNAL NAME
GND
RTS
CTS
RTS
-
-
TXD
RXD
-
HT300/HT330 User Manual
Rev.1.0
32
Ethernet Port
PIN
7
8
5
6
3
4
1
2
SIGNAL NAME
-
-
-
RX-
TX+
TX-
RX+
-
HT300/HT330 User Manual
Rev.1.0
33
HT300/HT330 User Manual
Chapter 5 Maintenance & Adjustment
Adhesives and coatings of the media can transfer to the printer parts over time along the media path including the thermal print head and media sensor. This build-up can accumulate dust and debris. Failure to clean the print head, media path, and media sensor could result in inadvertent loss of labels, label jams and possible damage to the printer.
Caution
Make sure to turn off the printer prior to cleaning.
As the print head gets hot during printing, if intending to clean the print head, turn the printer off and wait approximately 2~3 minute before commencement.
When cleaning the print head, take care not to touch the heated portion of the print head.
Print Head is susceptible to damage from static electricity, etc. So it is strongly recommended to wear hand gloves during cleaning progress.
Take care not to allow the print head become scratched and/or damaged in any way.
5.1 Cleaning Media Sensor
Debris or dirt on the paper sensor can cause a miss-read or unstable detection of the label gap.
Clean with a cotton bud dampened with alcohol.
5.2 Cleaning Thermal Print Head
Thermal Paper stock on the print head, which degrades print quality. Clean the print head with methanol or isopropyl alcohol and a cotton bud. Do not touch the heating elements with your fingers.
1) Open the Printer Cover and then use the cleaning pen to clean the head in the direction from the center of the head to two sides.
2) After cleaning the head, do not use the printer until the alcohol used for cleaning evaporates completely (1~2 min) and the printer has completely dried.
3) Perform the cleaning process each time the paper roll is replaced to prevent print quality deterioration.
Rev.1.0
34
HT300/HT330 User Manual
5.3 Cleaning Roller and/or Paper Path
1) Open the printer cover and then remove the paper.
2) Remove any dust or foreign substance using dry cloth or cotton swab.
3) Soak the cloth or cotton swab in alcohol for medical use and use it to remove adhesive foreign substances or other pollution materials.
4) After cleaning the parts, do not use the printer until the alcohol evaporates completely (1~2 min) and the printer has completely dried
Note: Clean the parts when print’s quality or label detection degrades.
Rev.1.0
35
HT300/HT330 User Manual
Chapter 6 Label Printer Utility Instructions
6.1 Installation Preparation
Download the application program in CD. eg: HPRTUtilityForLabel_Channel V2.0.0.2.
6.2 Usage
Note: The screen may vary slightly by different operating systems and models. Take HT300 as example. Please refer to HT300 when using HT330.
(1)Install “HPRTUtilityForLabel_Channel V2.0.0.2.exe”, then open the “HPRTUtility”.
Rev.1.0
36
HT300/HT330 User Manual
(2)Add/Modify/Delete Printer, Connect Test.
●Click “Add Printer”. Choose the printer and port(eg: USB), then click “OK”, showed in “Printer
List”.
Rev.1.0
37
HT300/HT330 User Manual
●Click “Modify Printer”. Choose the printer and port(eg: COM1), then click “OK”, showed in
“Printer List”.
Rev.1.0
38
HT300/HT330 User Manual
●Click “Delete Printer”. Click “OK” to delete the printer, and click “Cancel” to cancel the command.
●Click “Connect Test” to test whether the connection is successful or not.
If connection succeeds, it shows as follows.
If connection fails, it shows as follows.
Note:
1.Connect printer to power first, then choose one port (depended on the printer you bought) to connect to the PC. Much more information of connecting method is contained in “3.3
Peripherals Connection”.
2.When connection fails, please check the connection and whether it matches or not.(When
USB port is used, it is better to connect one printer only.)
Rev.1.0
39
HT300/HT330 User Manual
(3)Function.
●Click “Printer Information”, showing printer information.(varies by different printers)
●Click “Print Test Text”. Type the text and set up the printing range. Click “Print”, then printer starts to print the test text.
●Click “Print Self Information”, then printer starts to print self-test page.
● Click “Label Auto Learn”, then printer will carry out the calibration.
●Click “Parameter Setting”.
Rev.1.0
40
BT Config:
Ethernet Setting:
HT300/HT330 User Manual
Rev.1.0
41
Print type:
Reprint when error:
HT300/HT330 User Manual
Rev.1.0
42
Label paper automatic position when power on:
HT300/HT330 User Manual
Judge paper mode:
Rev.1.0
43
Print density(range:0-15):
Heat Adjust(range:-50—50):
HT300/HT330 User Manual
Rev.1.0
44
HT300/HT330 User Manual
Print Speed(range:2345):
Protocol:
Click “Set”, and back to the main menu.
●Click “Restore Factory Settings”. Click “OK” to restore factory settings, and click “Cancel” to cancel the command.
(4)Click “Quit”, and finish printer settings.
Rev.1.0
45
HT300/HT330 User Manual
Chapter 7 Seagull Windows Driver Instructions
7.1 Introduction
The following operating systems are supported:
Microsoft Windows 10 (32 bit/64 bit)
Microsoft Windows 8 (32 bit/64 bit)
Microsoft Windows 7 SPI (32 bit/64 bit)
Microsoft Windows Vista SP2 (32 bit/64 bit)
Microsoft Windows XP Professional SP3 (32 bit)
Microsoft Windows Server 2012(64 bit)
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 SP2(32 bit/64 bit)
Microsoft Windows Server 2003 R2 SP2(32 bit/64 bit)
7.2 Installation Preparation
Download Seagull Windows Driver application program in CD.
Rev.1.0
46
HT300/HT330 User Manual
7.3 Installation
Note:
Under different operating systems, the screen may be slightly different. Take Windows 7 as example.
Take HPRT HT300 as example. Please refer to HPRT HT300 when using HPRT HT330.
To avoid the prevention, recommend to close the security software before installation.
1.Select one interface to connect your printer to computer.
2.Turn on the printer and check if it is connected to computer successfully.
3.Double click Seagull Windows Driver .
4.Read and agree the license agreement. Then click “Next”.
Rev.1.0
47
5.Choose the installation directory, then click “Next”.
HT300/HT330 User Manual
6.Click"Finish".
Rev.1.0
48
7.Select "Install printer drivers", then click "Next".
HT300/HT330 User Manual
Note: If you have connected the printer to computer, it will detect and install the driver automatically.(eg.: USB port)
8.Select "Install a driver for a Plug and Play printer”, then click "Next".
Rev.1.0
49
9.Enter a name for this printer, then click "Next".
HT300/HT330 User Manual
10.Click"Finish".
Rev.1.0
50
HT300/HT330 User Manual
11.Click "Close", and the HPRT HT300 Label printer driver is installed successfully.
12.After installation, the icon will be found in ”Start”→“Devices and Printers”.
Note:
1.If you have already installed the driver (No matter what kind of ports), it will generate a
USB port automatically when connecting the printer to computer.
2.Any problems exist, please use our utility tool in CD.
Rev.1.0
51
HT300/HT330 User Manual
7.4 Usage
7.4.1 Printing Preferences
1.Click “Start”→“Devices and Printers”. Right click “HPRT HT300” and choose “Printing preferences”.
Rev.1.0
52
2.According to different needs, set up the page.
HT300/HT330 User Manual
Rev.1.0
53
● Click “Stock”→”Name”, and choose the paper type.
HT300/HT330 User Manual
● Click “New Stock”, and set up a new stock.
Rev.1.0
54
● Click “Edit Stock”, and edit the stock.
HT300/HT330 User Manual
● Click “Delete Stock”, and delete the stock.
Rev.1.0
55
● Choose “Orientation” or “Effects”, showed in the “Preview”.
HT300/HT330 User Manual
Rev.1.0
56
● Click “Preset”→“Name”, and back to the default settings.
HT300/HT330 User Manual
● Click “Manage”, and change the settings.
Rev.1.0
57
3.Click “Graphics”, and edit the pictures.
HT300/HT330 User Manual
Rev.1.0
58
4.Click “Stock”.
HT300/HT330 User Manual
Rev.1.0
59
● Click “Method”, and choose the printing method.
HT300/HT330 User Manual
Rev.1.0
60
● Click “Type”, and choose the printing type.
HT300/HT330 User Manual
Rev.1.0
61
● Click “Post-Print Action”, and choose the method of media handing.
HT300/HT330 User Manual
Rev.1.0
62
HT300/HT330 User Manual
7.4.2 Printer Properties
1.Click “Start”→“Devices and Printers”. Right click “HPRT HT300” and choose “Printer properties”.
Rev.1.0
63
HT300/HT330 User Manual
2.Click “General”→“Print Test Page”, and printer will print labels with current settings.
Rev.1.0
64
HT300/HT330 User Manual
7.4.3 Print Server Properties
1.Click “Start”→“Devices and Printers”. Then click “Print server properties”.
Rev.1.0
65
HT300/HT330 User Manual
2.Click “Create a new form”, write in “Form name” and edit width and height in “Paper size”.
Finally, click “Save Form”.
Rev.1.0
66
3.The new label form is showed in “Forms on”.
HT300/HT330 User Manual
Rev.1.0
67
7.5 Label’s Width
USER(4.00 in×4.00 in)
2×4(2.00 in×4.00 in)
4×4(4.00 in×4.00 in)
4×6(4.00 in×6.00 in)
HT300/HT330 User Manual
Rev.1.0
68
HT300/HT330 User Manual
Chapter 8 BarTender® Ultralite Instructions
8.1 Introduction
This chapter provides instructions on BarTender® Ultralite program according to PC operating systems(OS).
The followings are supported.
Microsoft Windows 10 (32 bit/64 bit)
Microsoft Windows 8 (32 bit/64 bit)
Microsoft Windows 7 SPI (32 bit/64 bit)
Microsoft Windows Vista SP2 (32 bit/64 bit)
Microsoft Windows XP Professional SP3 (32 bit)
Microsoft Windows Server 2012(64 bit)
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 SP2(32 bit/64 bit)
Microsoft Windows Server 2003 R2 SP2(32 bit/64 bit)
8.2 Installation Preparation
Download BarTender® Ultralite application program in CD.
Rev.1.0
69
HT300/HT330 User Manual
8.3 Installation
Note ：
Under different operating systems, the screen may be slightly different. Take Windows 7 as example.
Take HPRT HT300 as example. Please refer to HPRT HT300 when using HPRT HT330.
To avoid the prevention, recommend to close the security software before installation.
1.Double click application program .
2.Select language, then click "OK".
3.Click "Install".
Rev.1.0
70
4.Click " Next".
HT300/HT330 User Manual
5.Read and accept the license agreement, then click "Next".
Rev.1.0
71
6.Select "Features" and Installation Location, then click "Next".
HT300/HT330 User Manual
7.Click "Install".
Rev.1.0
72
8.Click “Finish”.
HT300/HT330 User Manual
9.Back to desktop, and you will see the icon of BarTender®. Dobule click it, and start to use.
Rev.1.0
73
HT300/HT330 User Manual
8.4 Usage
8.4.1 Page Settings
1.Double click the icon, then choose the edition. Click “OK”. (The edition may be changed according to different needs.)
2.Click “Start a new BarTender document”.
Rev.1.0
74
3.Choose “Blank Template”, then click “Next”.
HT300/HT330 User Manual
Rev.1.0
75
4.Choose the printer type, then click “Next”.
HT300/HT330 User Manual
Rev.1.0
76
HT300/HT330 User Manual
5.If the predefined stocks don’t meet your need, tick “Specify Custom Settings”. Then click”Next”.
Rev.1.0
77
HT300/HT330 User Manual
6.Tick “Single item per page”, then click “Next”. (If you print multiple labels, tick “Multiple columns and/or rows of items per page ”.)
Rev.1.0
78
7.Edit the side edges, then click “Next”.
HT300/HT330 User Manual
Rev.1.0
79
8.Choose the item shape, then click “Next”.
HT300/HT330 User Manual
Rev.1.0
80
9.Edit the template size, then click “Next”.
HT300/HT330 User Manual
Rev.1.0
81
HT300/HT330 User Manual
10.Based on your need, edit the template background. Then click ”Next”.
Rev.1.0
82
HT300/HT330 User Manual
11.Finish the settings, showed in the “Review” and “Preview”. Then click “Finish”.
Rev.1.0
83
8.4.2 label Edit
1.
Click the icon of code .
2.Choose the code, then click “Select”.
HT300/HT330 User Manual
Rev.1.0
84
3.Click the blank, showing the code.
HT300/HT330 User Manual
Rev.1.0
85
4.Double click the code and edit it.
HT300/HT330 User Manual
Rev.1.0
86
● Click “Symbology and Size”, then edit the size.
HT300/HT330 User Manual
Rev.1.0
87
● Click “Human Readable”, then edit the position.
HT300/HT330 User Manual
Rev.1.0
88
● Click “Font”, then edit the character.
HT300/HT330 User Manual
Rev.1.0
89
● Click “Text Format”, then edit the paragraph.
HT300/HT330 User Manual
Rev.1.0
90
● Click “Border”, then edit the border.
HT300/HT330 User Manual
Rev.1.0
91
5.Click the icon of character , then enter the text.
HT300/HT330 User Manual
Rev.1.0
92
6.Click the icon of picture , then edit the pictures.
HT300/HT330 User Manual
Rev.1.0
93
7.Compose the text.
HT300/HT330 User Manual
8.Finish all the settings. Click “Print” and a new label has been printed.
Rev.1.0
94
Advertisement
