Moen 87650SRS Anabelle Spot resist stainless one-handle high arc kitchen faucet Specifications

S p e c ­i ­f i ­c a ­t i o n s

Order by Part Number

There is more than 1 version of this model.

Page down to identify the version you have.

FAUCET DESCRIPTION

• Metal construction with various finishes identified by suffix

• High arc spout provides the height and reach to fill or clean large pots

• Mounts with or without deck plate

• Flexible supply lines with 3/8" compression fittings

• 360˚ rotating spout

• With side spray

• Duralock™ Quick Connect Installation

OPERATION

• Single handle lever

• Temperature controlled by 100˚ arc of handle travel

FLOW

• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi

• Operates in eco-performance mode by default in aerated and spray stream

CARTRIDGE

• 1255™ Duralast™ cartridge for Single-Handle Faucets

• Engineered polymers, non-ferrous and stainless steel materials

STANDARDS

• Third party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1

and all applicable requirements referenced therein including NSF 61 & 372

• Meets CalGreen and Georgia SB370 requirements

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

Anabelle™

Single-Handle Single-Hole Mount

High Arc Kitchen Faucet with Side Spray

Models: 87650 series with spray

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 2 HOLES:

A 1-1/2" (38MM) MIN. DIA. HOLE FOR VALVE AND A 1-1/4" (32MM)

MIN. DIA. HOLE FOR SIDE SPRAY. HOLES ON 4" OR 8" CENTERS.

8-1/8"

(206mm)

15-3/4"

(400mm)

5-1/2"

(140mm)

2"

(51mm)

6-1/2"

(165mm)

10-1/4" x 2-3/8"

(260mm x 60mm)

ESCUTCHEON

2-3/16"

(56mm)

4-3/4"

(121mm)

1/2"

(13mm)

1-1/2" (38mm)

THRU HOLE

2-1/2" (63mm)

MAX DECK

THICKNESS

1-1/4" (32mm)

THRU HOLE

10-7/8"

(276mm)

2-5/16"

(58mm)

29-1/2"

(750mm)

Rev. 6/15

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com

S p e c ­i ­f i ­c a ­t i o n s

FAUCET DESCRIPTION

• Metal construction with various finishes identified by suffix

• High arc spout provides the height and reach to fill or clean large pots

• Mounts with or without deck plate

• Flexible supply lines with 3/8" compression fittings

• 360˚ rotating spout

• Includes traditional side spray and quick connect system

OPERATION

• Single handle lever

• Temperature controlled by 100˚ arc of handle travel

FLOW

• Aerator is limited to 1.5 gpm max (5.7 L/min)

CARTRIDGE

• 1255™ Duralast™ cartridge

STANDARDS

• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein including NSF 61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

Anabelle™

Single-Handle Single-Hole Mount

High Arc Kitchen Faucet with Side Spray

Models: 87650 series with spray

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 2 HOLES:

A 1-1/2" (38MM) MIN. DIA. HOLE FOR VALVE AND A 1-1/4" (32MM)

MIN. DIA. HOLE FOR SIDE SPRAY. HOLES ON 4" OR 8" CENTERS.

8-1/8"

(206mm)

15-3/4"

(400mm)

5-1/2"

(140mm)

2"

(51mm)

6-1/2"

(165mm)

10-1/4" x 2-3/8"

(260mm x 60mm)

ESCUTCHEON

2-3/16"

(56mm)

4-3/4"

(121mm)

1/2"

(13mm)

1-1/2" (38mm)

THRU HOLE

2-1/2" (63mm)

MAX DECK

THICKNESS

1-1/4" (32mm)

THRU HOLE

10-7/8"

(276mm)

2-5/16"

(58mm)

29-1/2"

(750mm)

Rev. 6/15

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com