® There is more than 1 version of this model.

Page down to identify the version you have.

Specifications

FAUCET DESCRIPTION

• Metal construction with a chrome plated or decorative glacier or sand finish

• 9" spout with 1/2" IPS adapters on 3/8" copper tube inlets

• Includes Protégé side spray

OPERATION

• Lever style handle

• Temperature controlled by 180˚ arc of handle travel

• Will operate with less than 5lbs. of force

FLOW

• Aerator is limited to 2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1225 cartridge design

• Nonmetallic/nonferrous and stainless steel material

• Capable of correcting reversed piping and can accommodate back to back installations

STANDARDS

• The faucet is third party certified by CSA to meet the following: CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein and complies with the applicable requirements of

ANSI A117.1

• Certified to ANSI/NSF 61/9

• Complies with California Proposition 65 and with the Federal Safe Water Drinking Act

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

ADA

LEGEND ®

Single-Handle Kitchen Faucet w/Protégé Side Spray

Models: 7215, 7215S, 7215W

7216, *67215

*67215 Discontinued 3/31/98

NOTE: See reverse side for illustrated parts

NOTE: DESIGNED TO INSTALL

THRU 2 HOLES 1-1/4" (32mm) MIN. DIA.

AND 4" (102mm) ON CENTER

7-3/4"

(171mm)

OPEN POSITION"

5-1/8"

(130mm)

NOMINAL

SUPPLIES

3/4" (19mm)

MAX. DECK

THICKNESS

4" (102mm)

SPRAY HOSE

CRITICAL DIMENSIONS

(DO NOT SCALE)

MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158

Rev. 7/01

®

Specifications

FAUCET DESCRIPTION

• Metal construction with a chrome plated or decorative glacier or sand finish

• 9" spout with 1/2" IPS adapters on 3/8" copper tube inlets

• Includes Protégé side spray

OPERATION

• Lever style handle

• Temperature controlled by 180˚ arc of handle travel

• Will operate with less than 5lbs. of force

FLOW

• Aerator is limited to 2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1225 cartridge design

• Nonmetallic/nonferrous and stainless steel material

• Capable of correcting reversed piping and can accommodate back to back installations

STANDARDS

• The faucet is third party certified by CSA to meet the following: CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein and complies with the applicable requirements of

ANSI A117.1

• Certified to ANSI/NSF 61/9

• Complies with California Proposition 65 and with the Federal Safe Water Drinking Act

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

ADA

LEGEND ®

Single-Handle Kitchen Faucet w/Protégé Side Spray

Models: 7215, 7215S, 7215W

7216, *67215

*67215 Discontinued 3/31/98

NOTE: See reverse side for illustrated parts

NOTE: DESIGNED TO INSTALL

THRU 2 HOLES 1-1/4" (32mm) MIN. DIA.

AND 4" (102mm) ON CENTER

7-3/4"

(171mm)

OPEN POSITION"

5-1/8"

(130mm)

NOMINAL

WASHER

LOCKNUT

SUPPLIES

3/4" (19mm)

MAX. DECK

THICKNESS

4" (102mm)

SPRAY HOSE

CRITICAL DIMENSIONS

(DO NOT SCALE)

MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158

Rev. 11/99