COMBINATION INSTALLATIONS
Single Wall Oven/Drop-In Cooktop/
PLANNING
030106
1/1
Raised Vent
GUIDE
Wall board
3/4" (19mm) Max. Backsplash thickness
1/4" (6mm) Min. flat area
Stud wall
2 3/8" (60mm) RV cutout
1 13/16" (46mm)
3"
(76mm)
4"
(102mm)
All Dacor
Drop-In
Cooktops
Cabinet
back
1/2"x2"
Channel
2 3/8"
(60mm)
Oven
RV
22 1/4" (565mm)
Cooktop and RV cutout
7 1/4"
(184mm)
Face of cabinet
All Dacor Drop-In
Cooktops
RV 30/36/46 with
Remote Blower
(REMP3) option
3 1/4" x 10"
Exhaust duct
31 1/4" (794mm)
Minimum from
finished
countertop to
oven platform
4 1/4"
(108mm)
3/8" (10mm) REMP3
Duct cover plate
Air
C
L
DUCT
36"
(914mm)
Typical
counter height
All Dacor
Single Ovens
fit this application
Adjustable support leg
27 1/4" (692mm)
3 1/4" (83mm) x 10" (254mm)
30 1/2" (775mm) Min.
NOTE:
1.
Face of cabinet
cutaway sideview
The SGM464GG is not approved for installation above an
single wall oven.
Web: http://www.Dacor.com
Corporate Phone: 800-793-0093
4 3/4" (121mm)
Typical oven
platform height
2.
The PGM365-1 is approved for installation above an
undercounter wall oven.
Specifications are subject to change without notice.
See installation instructions for additional details.
CI.1
">
