LG Electronics N1941WE Computer Monitor User's Guide

Add to My manuals
29 Pages

advertisement

LG Electronics N1941WE Computer Monitor User's Guide | Manualzz

User’s Guide

Network Monitor

N1642W

N1642WP

N1941W

N1941WP

N1941WE

M ake sure to read the Important Precautions before using the product.

Keep the User's Guide(CD) in an accessible place for future reference.

S ee the label attached on the product and give the information to your dealer when you ask for service.

With LG Network Monitor, some PC programs may not be compatible or need to be modified due to different kind of operation.

Please check the compatibility in advance, before purchasing or installing the software. LG do not have any kind of legal liability on this matter.

Accessories

!!! Thank for selecting LGE products !!!

Please make sure the following items are included with your monitor. If any items are missing, contact your dealer.

User's Guide/Cards

Power Cord

(Depending on the country)

15-pin D-Sub Signal Cable

(To set it up, this signal cable may be attached to this product before shipping out.) and

Lan cable and EMI Core

(These items are not included for all models.)

IMPORTANT

This accessories may look different from those shown here.

User must use shielded signal interface cables (D-sub 15 pin cable, LAN cable) with ferrite cores to maintain standard compliance for the product.

Important Precautions

This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.

On Safety

Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

Do not Open the Display:

There are no user serviceable components inside.

There are Dangerous High Voltages inside, even when the power is OFF.

Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured.

Use only a stand recommended by the manufacturer.

Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.

It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house.

Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages.

Do not add accessories that have not been designed for this display.

When the display is to be left unattended for an extended period of time, unplug it from the wall outlet.

In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock.

A1

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.

Place the display in a built-in enclosure unless proper ventilation is provided.

Cover the openings with cloth or other material.

Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen.

However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product.

Burn-in and related problems are not covered by the warranty on this product.

Do not shock or scratch the front and sides of the screen with metallic objects.

Otherwise, it may cause damage to the screen.

Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair.

Avoid high temperatures and humidity.

A2

Important Precautions

On Cleaning

Unplug the display before cleaning the face of the display screen.

Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock.

When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)

Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining.

On Repacking

Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.

On Disposal

(Only , Hg lamp used LCD Monitor)

The fluorescent lamp used in this product contains a small amount of mercury.

Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of your local authority.

A3

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.

Connecting the stand

1 .

Place the monitor with its front facing downward on a soft cloth.

2

.

Assemble the Stand Body into the product in the correct direction as shown in the picture.

Make sure you push it until you hear it “click”.

Hinge Body

Stand Body

3

.

Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.

Stand Body

Stand Base

4 .

Tie down the base lock to perpendicularity direction.

5 .

Once assembled take the monitor up carefully and face the front side .

Important

This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.

Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.

A4

Connecting the Display

Disassembling the stand

1.

Put a cushion or soft cloth on a flat surface.

2.

Place the monitor face down on the cushion or soft cloth.

3.

Change your lock on the product as it follows and turn it in the arrow direction.

If you can't release the stand base even the locking knob is at a release position, Please push the indicated knob down and retry it.

4.

Pull out the stand to remove.

A5

Connecting the Display

5.

Pushing the PUSH button, take the stand base from stand body.

Warning:

You can hurt your finger.

Good Position Bad Position

Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.

Positioning your display

1.

Adjust the position of the panel in various ways for maximum comfort.

Tilt Range : -5˚~20˚

When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s).

Ergonomic

It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.

A6

Connecting the Display

Using the Computer

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

1.

A

B

Connect D-sub(RGB Analog) Cable (PC)

Connect D-sub(RGB Analog) Cable (Mac)

Analog signal

Wall-outlet type

Mac adapter (This item must be purchased separately.)

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub

VGA connector on the supplied cable to a 15 pin 2 row connector.

2.

Press button on the front switch panel to turn the power on. When monitor power is turned on, the

'Self Image Setting Function' is executed automatically.

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.

‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.

A7

Connecting the Display

Using the Monitor

1.

Make sure to turn off the computer and product. Connect the cable as below sketch map

1

2

Connect peripheral devices

Connect LAN Cable (X550 port)

Analog signal

Wall-outlet type

(Make sure to connect X550 port,not LAN port of PC)

X550 port

Up to 5 ports are supported per X550 PCI Card.

Up to 5 ports can be connected if necessary.

(These items are not included for all models.)

Keyboard/Mouse Input

LAN cable should be connected before booting PC.(This item must be purchased separately.)

Headphone/Earphone Input

Automatically mutes the speaker volume when the headphones are plugged in.

When you use the monitor speaker via the X-PORT, turn the PC volume up to the highest level and adjust the monitor volume.

It is recommended to use a PS/2-type keyboard/mouse.

To use the monitor keyboard/mouse properly, it must be connected to the PC.

Applications that require other than 16 bit color quality and the set resolution are not supported.

‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or titled screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.

2.

Press button on the front switch panel to turn the power on.

A8

Connecting the Display

NOTE

LAN Cable

-For the LAN cable,it is recommended to use SFTP(recommend : 6m,max : 10m) provided by LG.

Image quality and some functionality may be degraded if a different LAN cable is used.

-To achieve good image quality,avoid using UTP and STP cables.

-You must use a direct LAN cable,not a crossover one.

Both connections should be same colors.

Do not connect any kind of network devices.

Core

The ferrite core can be used to reduce electromagnetic waves when connecting a

LAN cable.

As shown in the image below,fit the ferrite core to the LAN cable.

The ferrite core needs to be separated from the mold by 5 centimeters.

You can purchase SFTP(recommend : 6m,max : 10m)LAN cables and cores through LG additionally.

50 10mm

50 10mm

A9

Connecting the Display

Connecting to a X550 port using a LAN cable.

Notice

Turning the power off while booting the PC may damage the product.

Turning the power off while booting the PC may cause it to operate incorrectly.

If the mouse is connected using a USB device and is not detected, disconnect and connect it again.

If you reconnect a peripheral device such as a keyboard, mouse or LAN cable while the PC is in operation, the device may not work properly.

Make sure that the power is turned off when disconnecting/connecting a peripheral device.

Making both ends of LAN cable to across the coil two times before connect to network monitor and PC.

PC spec :

The host PC operating system can be Windows Server 2003 R2 SP2(Standard or

Enterprise Edition, 32-bit).

Notice

- To achieve the best PC performance, up to six users are recommended for one PC.

If there are seven or more users, performance may be degraded depending on the environment and the PC’s specifications.

- Check if the PC supports Windows Server 2003 before purchasing it.

A host PC should have the following specifications:

1. Minimum

- CPU : Dual core processor at 3.0 GHz or higher

(i.e. : Intel Core 2 Duo or AMD Athlon X2)

- RAM : 2 GB of system memory or higher

2. Recommend

- CPU : Quad core processor at 2.66 GHz or higher

(i.e. Intel Core 2 Quad or AMD Phenom X4)

- RAM : 4 GB of system memory

3. Internet access speed may be different depending on the network environment.

Restrictions :

Using this network monitor for the following purposes may cause screen disruption or slower PC operation.

1. Video / Moving picture

2. Games

Color setting:

Image quality may vary depending on the X550 card, so it is recommended to execute “White Balance” when using the product as a network monitor after connecting a LAN cable for the first time.

Refer to A18 for more information on White Balance.

If you use the monitor with a X-PORT input, image quality and resolution may be poorer than with a D-sub input.

( Only 16 bit color is supported for X-PORT input.)

A10

Control Panel Functions

Front Panel Controls

Control Function

MUTE Button

• X-PORT : This menu is available, use this button to switch the sound on or off.

or

<mute off>

• D-sub : This menu is not available.

<mute on>

MENU Button

Use this button to enter or exit the On Screen Display.

OSD LOCKED/UNLOCKED

This function allows you to lock the current control settings, so that they cannot be inadvertently changed.

Press and hold the MENU button for several seconds.

The message "OSD LOCKED" should appear.

You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message

"OSD UNLOCKED" should appear.

A11

Control Panel Functions

Control Function

SOURCE

Use these buttons to select or adjust functions in the

On Screen Display.

Use this button to make either D-Sub or X-PORT connector active. This feature is used when two input sources are connected to the display.

VOLUME Use these buttons to select or adjust functions in the On

Screen Display.

Use buttons to decrease or increase the speaker volume on X-PORT input.

AUTO/SET

Button

Use this button to enter a selection in the On Screen

Display.

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press the AUTO/SET button before entering the On Screen

Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).

The best display mode is

- 16 inches : 1360 x 768

- 19 inches : 1360 x 768

Power Button

Power Indicator

Use this button to turn the display on or off.

This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep

Mode (Energy Saving), this indicator color changes to flicker.

A12

On Screen Display (OSD) Control Adjustment

Screen Adjustment

Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen

Display Control system.

A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.

NOTE

Allow the display to stabilize for at least 30 minutes before making image adjustments.

To make adjustments in the On Screen Display, follow these steps:

MENU AUTO/SET MENU

Press the MENU Button , then the main menu of the OSD appears.

To access a control, use the or Buttons . When the icon you want becomes highlighted, press the AUTO/SET Button .

Use the / Buttons to adjust the image to the desired level. Use the

AUTO/SET Button to select other sub-menu items.

Push the MENU Button once to return to the main menu to select another function. Push the MENU Button twice to exit from the OSD.

A13

On Screen Display(OSD) Selection and Adjustment

The following table indicates all the On Screen Display control, adjustment, and setting menus.

( : Adjustable A : D-SUB Input X : X-PORT Input )

Main menu

PICTURE

COLOR

POSITION

TRACKING

SETUP

FLATRON

F ENGINE

Sub-menu

BRIGHTNESS

CONTRAST

GAMMA

PRESET

RED

GREEN

BLUE

HORIZONTAL sRGB

6500K

9300K

VERTICAL

CLOCK

PHASE

SHARPNESS

LANGUAGE

OSD HORIZONTAL

POSITION VERTICAL

WHITE BALANCE

POWER INDICATOR

4:3 IN WIDE

FACTORY RESET

MOVIE

INTERNET

USER

ACE

RCM

NORMAL

DEMO

A X Reference

To adjust the brightness, contrast and gamma of the screen

To customize the color of the screen

To adjust the position of the screen

To improve the clarity and stability of the screen

To customize the screen status for a user's operating environment

To select or customize desired image settings

NOTE

The order of icons may differ depending on the model (A14~A19).

A14

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu.

Press the MENU Button, then the main menu of the OSD appears.

Main Menu

Menu Name

MENU : Exit

: Adjust (Decrease/Increase)

SET : Enter

Menu Name

: Select another sub-menu

: Restart to select sub-menu

Button Tip

Icons

Sub-menus

NOTE

OSD (On Screen Display) menu languages on the monitor may differ from the manual.

A15

On Screen Display(OSD) Selection and Adjustment

Sub menu Description

PICTURE

Main menu

PICTURE

BRIGHTNESS To adjust the brightness of the screen.

CONTRAST To adjust the contrast of the screen.

GAMMA Set your own gamma value. : -50/0/50

On the monitor, high gamma values display whitish images and low gamma values display blackish images.

MENU : Exit

: Decrease

: Increase

SET : Select another sub-menu

COLOR

COLOR

PRESET

RED

GREEN

MENU : Exit

: Decrease

: Increase

BLUE

SET : Select another sub-menu

Select the screen color.

• sRGB: Set the screen color to fit the

SRGB standard color specification.

• 6500K: Slightly reddish white.

• 9300K: Slightly bluish white.

Set your own red color levels.

Set your own green color levels.

Set your own blue color levels.

A16

On Screen Display(OSD) Selection and Adjustment

Sub menu Description

POSITION

Main menu

POSITION

HORIZONTAL To move image left and right.

VERTICAL To move image up and down.

MENU : Exit

: Decrease

: Increase

SET : Select another sub-menu

TRACKING

TRACKING

MENU : Exit

: Decrease

: Increase

SET : Select another sub-menu

CLOCK

PHASE

To minimize any vertical bars or stripes visible on the screen background.

The horizontal screen size will also change.

To adjust the focus of the display.

This item allows you to remove any horizontal noise and clear or sharpen the image of characters.

SHARPNESS To adjust the clearness of the screen.

A17

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

SETUP

SETUP

LANGUAGE

OSD

POSITION

WHITE

BALANCE

To choose the language in which the control names are displayed.

To adjust position of the OSD window on the screen.

If the output of the video card is different from the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image.

Activate this function when white and black colors are present in the screen.

POWER

INDICATOR

Use this function to set the power indicator on the front side of the monitor to ON or OFF .

If you set OFF , it will go off.

If you set ON at any time, the power indicator will automatically be turned on.

Use this function to select the image size of the screen.

MENU : Exit

: Adjust

: Adjust

SET : Select another sub-menu

4:3 IN WIDE

WIDE 4:3

• WIDE : Switch to full screen mode according to input image signal.

• 4 : 3 : Change the image signal ratio into 4:3.

FACTORY

RESET

Restore all factory default settings except

"LANGUAGE" .

Press the , buttons to reset immediately.

If this does not improve the screen image, restore the factory default settings.

If necessary, perform the white balance function again. This function will be enabled only when the input signal is a D-sub or X-PORT input signal.

A18

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

MOVIE

INTERNET

This feature lets you easily select the best desired image condition optimized to the environment

(ambient illumination, image types etc).

MOVIE : For animation images in videos or movies

INTERNET : For text images (Word processing etc.)

MENU : Exit

: Decrease

: Increase

SET : Select another sub-menu

USER User

You can manually adjust ACE or RCM.

You can save or restore the adjusted value even when using a different environment.

...

ACE (Adaptive Clarity Enhancer) : Selects the clarity mode.

...

RCM (Real Color Management) : Selects the color mode.

0

1

2

3

Not applied

Green enhance

Flesh tone

Color Enhance

NORMAL This is under normal operating conditions.

DEMO This is just for advertising to customer in the shops. It’s setting is same with Movie mode and screen is divided by half.

The INTERNET and NORMAL features become enabled for X-PORT input.

A19

Troubleshooting

Check the following before calling for service.

Is the power cord of the display connected?

• Check and see if the power cord is connected properly to the power outlet.

● Is the power indicator light on?

Is the power indicator flickering?

• Press the Power button.

• If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.

• Try to turn on the PC.

● Do you see an "OUT OF

RANGE" message on the screen?

• This message appears when the signal from the

PC (video card) is out of horizontal or vertical frequency range of the display. See the

'Specifications' section of this manual and configure your display again.

● Do you see a "CHECK

SIGNAL CABLE" message on the screen?

• This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.

Do you see a "OSD LOCKED" message on the screen?

Do you see “OSD

LOCKED” when you push MENU button?

• You can secure the current control settings, so that they cannot be inadvertently changed.

You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message

“OSD UNLOCKED” will appear.

A20

Troubleshooting

Display image is incorrect

Display Position is incorrect.

• Press the AUTO/SET button to automatically adjust your display image to the ideal setting.

If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display.

● On the screen background, vertical bars or stripes are visible.

• Press the AUTO/SET button to automatically adjust your display image to the ideal setting.

If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display.

● Any horizontal noise appearing in any image or characters are not clearly portrayed.

• Press the AUTO/SET button to automatically adjust your display image to the ideal setting.

If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display.

• Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits

(true color).(Only for D-SUB input)

Important

Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution . (Only for D-SUB input)

The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer . (Only for D-SUB input)

If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.

A21

Troubleshooting

Display image is incorrect

The screen color is mono or abnormal.

• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.

• Make sure the video card is properly inserted in the slot.

• Set the color setting higher than 24 bits (true color) at Control Panel - Settings .

(X-PORT support only 16bits color)

- “White Balance” is performed on black/white pattern.

- Check if the screen is set to normal mode.

● The screen blinks.

• Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.

- Check if the screen is set to normal mode.

A22

Specifications

N1642W/N1642WP

Display

Sync Input

Video Input

Resolution

Plug&Play

Power

Consumption

Dimensions

& Weight

Tilt Range

Power Input

Environmental

Conditions

Stand Base

Power cord

15.6 inches (39.6 cm) Flat Panel Active matrix-TFT LCD, Anti-

Glare coating

Visible diagonal size: 39.6 cm

0.252*0.252 mm pixel pitch

D-SUB Horizontal Freq.

30 - 66 kHz (Automatic)

Vertical Freq. 57 - 63 Hz (Automatic)

D-SUB support 60Hz only(except Dos mode)

X-PORT 1440 x 900 (60Hz) 1280 x 720 (60Hz)

1360 x 768 (60Hz) 800 x 600 (72Hz)

1024 x 768 (60Hz)

D-SUB Signal Input 15 pin D-Sub Connector

Input Form

X-PORT Signal Input

Input Form

Max

Recommend

RGB Analog (0.7 Vp-p/ 75 ohm)

X-PORT Connector

X-PORT Signal

VESA 1360 x 768 @60 Hz

VESA 1360 x 768 @60 Hz

DDC 2B (Only for D-SUB Input)

On Mode

Sleep Mode

Off Mode

: 20W(Typ.)

1 W

1 W

With Stand Without Stand

Width 38.17 cm / 15.03 inches 38.17 cm / 15.03 inches

Height 32.39 cm / 12.75 inches 26.03 cm / 10.25 inches

Depth 19.84 cm / 7.81 inches 5.67 cm / 2.23 inches

Net 2.6 kg (5.78 lbs)

Tilt -5˚~ 20˚

AC 100-240V~ 50/60Hz 0.8A

Operating Conditions

Temperature 10˚C to 35 ˚C

Humidity

Storage Conditions

10 % to 80 % non-Condensing

Temperature -20˚C to 60 ˚C

Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

NOTE

Information in this document is subject to change without notice.

A23

Specifications

N1941W/N1941WP/N1941WE

Display

Sync Input

Video Input

Resolution

Plug&Play

Power

Consumption

Dimensions

& Weight

Tilt Range

Power Input

Environmental

Conditions

Stand Base

Power cord

18.51 inches (47.0 cm) Flat Panel Active matrix-TFT LCD,

Anti-Glare coating

Visible diagonal size: 47.0 cm

0.30*0.30 mm pixel pitch

D-SUB Horizontal Freq.

30 - 66 kHz (Automatic)

Vertical Freq. 57 - 63 Hz (Automatic)

D-SUB support 60Hz only(except Dos mode)

X-PORT 1440 x 900 (60Hz) 1280 x 720 (60Hz)

1360 x 768 (60Hz) 800 x 600 (72Hz)

1024 x 768 (60Hz)

D-SUB Signal Input 15 pin D-Sub Connector

Input Form

X-PORT Signal Input

Input Form

Max

Recommend

RGB Analog (0.7 Vp-p/ 75 ohm)

X-PORT Connector

X-PORT Signal

VESA 1360 x 768 @60 Hz

VESA 1360 x 768 @60 Hz

DDC 2B (Only for D-SUB Input)

On Mode

Sleep Mode

Off Mode

: 23W(Typ.)

1 W

1 W

With Stand Without Stand

Width 44.84 cm / 17.65 inches 44.84 cm / 17.65 inches

Height 35.79 cm / 14.09 inches 27.80 cm / 10.94 inches

Depth 19.84 cm / 7.81 inches 5.76 cm / 2.27 inches

Net 3.1 kg (6.89 lbs)

Tilt -5˚~ 20˚

AC 100-240V~ 50/60Hz 0.8A

Operating Conditions

Temperature 10˚C to 35 ˚C

Humidity 10 % to 80 % non-Condensing

Storage Conditions

Temperature -20˚C to 60 ˚C

Humidity 5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type

NOTE

Information in this document is subject to change without notice.

A24

Specifications

D-SUB Preset Modes (Resolution)

Display Modes (Resolution)

3

4

1

2

*5

720 x 400

640 x 480

800 x 600

1024 x 768

1360 x 768

Horizontal Freq. (kHz)

31.468

31.469

37.879

48.363

47.712

Vertical Freq. (Hz)

70

60

60

60

60

*Recommend Mode

X-PORT Preset Modes (Resolution)

Display Modes (Resolution)

3

*4

1

2

5

800 x 600(72Hz)

1024 x 768(60Hz)

1280 x 720(60Hz)

1360 x 768(60Hz)

1440 x 900(60Hz)

*Recommend Mode

Indicator

MODE

On Mode

Sleep Mode

Off Mode

LED Color

Blue

Flicker

Off

A25

Installing the Wall mount plate (Only for N1941W,N1941WP,N1941WE)

This monitor satisfies the specifications of the Wall mount plate or the interchange device.

1

.

Place the monitor with its front facing downward on a soft cloth.

2

.

Separate the stand by pushing the PUSH button.

3

.

Install the Wall mount plate.

Wall mount plate(Separate purchase)

This is stand-type or wall mount type and is connectable with Wall mount plate.

Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.LG recommends that wall mounting be performed by a qualified professional installer.

Good Position Bad Position

Warning:

You can hurt your finger.

Kensington Security Slot

Connected to a locking cable that can be purchased separately at most computer stores.

A26

Digitally yours

advertisement

Key Features

  • 48.3 cm (19")
  • 1366 x 768 pixels 16:9
  • 5 ms 250 cd/m²
  • 21 W

Related manuals

Download PDF

advertisement