Q
UICK
U
SE AND
I
NSTALLATION
G
UIDE
T
ABLE OF
C
ONTENTS
A
NT
(
ENNA
) A & B I
NPUTS
Y
our TV has two separate ANT(enna)/cable
inputs on the rear of the set. These two signal inputs offer convenient hookup options for both normal TV program viewing and
Picture-In-Picture (PIP) features.
The ANT(enna) A input is
intended for use and viewing on the TV’s main screen. Your home’s primary antenna or cable TV signal should be connected to this input for normal TV setup, use, and feature operation.
The PIP ANT(enna) B
input is a second, or auxiliary, signal source designed to supply your
TV’s Picture-In-Picture
(PIP) feature. For many homes, the use of a single, existing antenna or cable
TV source for both ANT A and PIP ANT B will be the preferred method of connection. This type of connection (optional signal splitter required) will work properly for the TV’s main onscreen features, as well as retain all the features designed for PIP. For more details, refer to the Picture-
In-Picture section in your other owner’s manual.
Model 32PT71B1
Color Television and Remote Control
A
NTENNA OR
C
ABLE
TV
A typical ANT(enna)
A and PIP ANT B connection
(using a common signal source and an optional signal splitter):
If your antenna or cable TV signal has a round cable con-
nector (75 ohm) on the end, then you're ready to connect it to the 75-ohm signal splitter.
If your antenna has flat, twin-
lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300- to 75ohm adapter before connecting to the 75-ohm signal splitter.
OR
Getting Started
10
9
8
7
11
12
6
5
1
2
4
3
Warning/Precautions ..................................1
Hooking Up Your TV ................................1
Basic TV and Remote Control Operation .................2
How to Use the Install Controls ...........................3–4
Using the Language Control......................................3
Setting the Tuner Mode .............................................3
Setting the TV to Auto Program Channels ................3
Using the Channel Edit Control ................................4
Setting the Channel Name Control............................4
How to use the AutoChron™ control........................4
300
Ω
(Ohm) to
75
Ω
(Ohm) Adapter
Twin–lead
Wire
Connect your Antenna or
Cable TV signal to the single,
75-ohm input plug on the twoway signal splitter (optional).
Then connect two lengths of RF coaxial cable to the two output plugs on the two-way signal splitter (F-type connector on both ends).
Combination VHF/UHF Antenna
NOTE: This Quick Use Guide may be used with other models. Some of the features listed may or may not apply to your TV.
Connect the twin output
plugs on the signal splitter to the ANT A and PIP ANT B inputs on the rear of the TV.
Push the round connector end of the RF coaxial cable onto the
ANT(enna) plug and screw it down tightly (if using threaded cables).
Back of TV
Your TV can set itself to select only the channel numbers on your cable system (see
“Auto Program" on page 3). If you use a cable converter box, set the TV to the same channel as the converter's CH 3/4 switch (on the back of the converter).
- Outdoor or Indoor Antenna -
Receives normal broadcast channels
2–13 (VHF) and 14–69 (UHF).
• For details on product registration, warranty,
and service, refer to the other literature included with your TV information packet.
Please retain all these materials and keep them handy for future reference.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.
S
MART
H
ELP
Remember, be sure to set the TV for the type signal to which you've connected. (See the “Tuner
Mode A/B” section on page 3.)
Round Cable
75
Ω
(Ohm)
OR
1
2
PIP ANT "B"
75 Ω
ANT "A"
75
Ω
8 8
PIP ANT "B"
75 Ω
ANT "A"
75 Ω
VIDEO
Monitor out
+ R – – L +
SURROUND SOUND
AV1 in AV2 in
L/Mono
Pb
Y
AUDIO
R Pr
M-Link
S-VIDEO
PIP ANT(enna)
B Input
8 8
AUDIO
R
+ R – – L +
SURROUND SOUND
AV1 in AV2 in
VIDEO
Monitor out
L/Mono
Y
3
S-VIDEO
Pb
Pr
M-Link
Contact your dealer, or call our Parts
Information Center at
1-800-851-8885 to order the following accessories:
• Two-way signal splitter
• 300
Ω
(ohm) to
75
Ω
(ohm) adapter
• Combination
VHF/UHF antenna.
OPTIONAL TWO-WAY
SIGNAL SPLITTER
(single, 75-ohm input to twin,
75-ohm outputs – optional RF coaxial connecting cables also required)
ANT(enna) A
Input
NOTE: Proper operation of your TV is not dependent
upon connection of the PIP ANT B input. The main purpose of the input is to provide an easily connected, dedicated picture source for use of the PIP feature. The PIP ANT B input can, however, be used to connect and display other signal source options such as a satellite dish system, an additional external antenna, a VCR, or a video game, for example.
Cable TV Signal
Round Cable
75
Ω
(Ohm)
NOTE: Although the PIP ANT B input can be used and
swapped as the source for the TV’s main picture, certain setup features (such as AutoChron™) are based only on a signal being detected at the ANT A input. To ensure that all features are operating properly, you may not want to rely solely on the PIP ANT B input as your TV’s main screen signal source.
Cable TV Company
C
ABLE
B
OX
C
ABLE
C
ONVERTER
B
OXES
F
or homes with cable
TV converter descrambler boxes (with premium/movie channels scrambled), follow the steps to the right for an alternative
ANT A and PIP ANT B feature hookup. Note that the Cable TV signal will be split before connection to the converter box (an optional two-way, 75-ohm signal splitter will be required).
Cable TV Company
1
2
OPTIONAL TWO-WAY
SIGNAL SPLITTER
Connect your cable
TV signal to the single, 75-ohm input plug on a two-way signal splitter (optional).
• The signal routed to the TV’s ANT A input will allow for premium/movie channels to be viewable on the TV.
• Channel selection will be at the converter.
• The ANT A input channel on the TV should be set to the same output channel as the converter box (usually CH 3 or 4).
Connect to ANT A Input
IN
OUT
Cable TV Converter
Box Connection
3
Connect to PIP ANT B Input
• The signal routed to the TV’s PIP ANT B input will allow for the selection and viewing of cable channels at the TV
(except for the scrambled premium/movie channels).
Connect one end of the
RF coaxial cable to each of the output plugs on the 75-ohm signal splitter. The two lengths of RF coaxial cable need Ftype connectors (screw-on or push type) for both ends.
Connect one of the signal
splitter outputs to the input terminal on the Cable TV converter box. Then route another
connection from the cable converter output terminal to the
ANT A input on the rear of the
TV.
1
4
Connect the remaining
signal splitter output from the splitter to the PIP ANT B input on the rear of the TV.
3135 015 17741
TV
AND
R
EMOTE
C
ONTROL
O
PERATION
T
ELEVISION
Press the POWER
button to turn the TV ON.
Press the VOL (+) button to increase the sound level or
the VOL (–) button to lower the sound level.
Pressing both buttons at the
same time will display the onscreen menu. After you are in the menu, use these buttons to make adjustments or selections.
Press the CH ▼ (down) or
▲ (up) button to select TV channels. Use these buttons to make adjustments or selections in the onscreen menu.
NOTE: Press three number
buttons on the remote control for channels 100 or above. For example: Press 1 then 2 then 5 for channel 125.
Point the remote control toward the remote sensor window on the TV when operating the TV with the remote.
REMOTE SENSOR WINDOW
MENU
CH – VOL +
R
EMOTE
B ATTERY I NSTALLATION
T o load the supplied batteries into the remote:
1. Remove the battery compartment lid on the back of the remote.
2. Place the batteries (2- AA) in the
remote. Be sure the (+) and (–) ends of the batteries line up correctly (the inside of the case is marked).
3. Reattach the battery lid.
Sleep Button
Press to set the TV to automatically turn itself OFF after a period of time. Choose 15, 30, 45, 60, 90, 120, 180, or 240 minute before the TV will automatically turn off.
TV/VCR (A/CH) Button
TV/VCR – Press while in the VCR mode (the VCR indicator on the front of the VCR will light) to view the playback of a tape. Press again to place in the TV position (the VCR indicator light will go off) to view one program while recording another program.
A/CH – Press to toggle between the currently viewed channel and the previously viewed channel.
Sound Button
Press to select an AutoSound™ control. Choose from three factory-set controls (VOICE, MUSIC, and THEATRE) and a
PERSONAL control that you set according to your own preferences through the onscreen Sound menu. The three factoryset controls will tailor the TV sound so as to enhance the particular type of program you are watching.
Menu Button
Press for the onscreen menu to appear. Pressing the menu button after menu selections are made will eliminate the menu from the display.
Cursor Buttons (Left, Right, Up, Down)
Press these buttons to highlight, select, and adjust items on the TV's onscreen menu.
Volume (+) or (–) Buttons
Press to adjust the TV sound level.
Mute Button
Press to turn the TV sound OFF. Press again to return the sound to its previous level.
Status/Exit Button
Press to see the current channel number on the TV screen.
Also press to clear the TV screen after control adjustments.
Source Button
Press repeatedly to select the different signal sources connected to the A/V inputs on the TV.
ITR/REC Button
After you’ve followed the easy steps for setting up your
VCR to work with the M-Link feature, you can press this button to record TV programs with your VCR. (See the
M-Link Instructions for Use that came with your TV for details and instructions.)
Home Video Button
After you’ve followed the easy steps for setting up your
VCR to work with the M-Link feature, you can press this button to play videotapes on your VCR. (See the M-Link
Instructions for Use that came with your TV for details and instructions.)
VCR
§§
, ■ ,
©
,
©©
, II Buttons
Press to rewind, stop, play, fastforward, or pause a videotape.
Incr. Surr. Button
Press to set various factory Surround Sound listening modes.
Program List/OK Button
Press to display a list of channel numbers and their names
(see the “Tuner,” “Auto Program,” “Channel Edit,” and
“Name” sections on pages 3 and 4 for proper setup). Each channel will appear as a selectable menu item. The current channel will be highlighted by default. Only five channels will be shown onscreen at one time; press the CURSOR UP or CURSOR DOWN button to scroll the list and highlight a channel. Press the CURSOR RIGHT button to tune to the highlighted channel. Channels marked “Skipped” in the
“Channel Edit” control will not appear in the list. Each channel that is being blocked by AutoLock™ will appear with a padlock icon to indicate that the channel is not viewable. PROGRAM LIST/OK also works as a confirmation/select button for VCR use.
SLEEP
1
POWER
TV/VCR
A/CH
SWAP
ON/OFF
SOURCE
PIP
POSITION FREEZE
UP
PIP CH
DN
SOUND
MENU
VOL
INCR. SURR.
MUTE
PICTURE
M-LINK
CH
SOURCE STATUS/EXIT CC CLOCK
ITR/REC HOME HOME PERSONAL
VIDEO MOVIES
SURF
PROGRAM LIST OPEN/CLOSE TUNER A/B
OK
2
4
SLEEP
POWER
ON/OFF
PIP
POSITION
FREEZE
PIP CH
UP
SOURCE
SW
AP
DN
2 3
PICTURE
M-LINK
SOUND
MENU
CH
VOL
MUTE
CC
SOURCE
STA
TUS/EXIT
HOME
ITR/REC
CLOCK
HOME
VIDEO
PERSONAL
MOVIES
SURF
INCR. SURR.
Power Button
Press to turn the TV ON and OFF.
PROGRAM LIST
OPEN/CLOSE
TUNER A/B
PIP Buttons
Press to operate Picture-In-Picture features. See the PIP section in the Instructions for Use manual for details.
Light Button
Press to back-light the buttons on the remote control.
Number Buttons
Press the number buttons to select TV channels. When selecting single-digit channels, press the number of the desired channel. The TV will pause for a few seconds and then tune to the selected channel. (Note: You can press 0, then the number also.) For channels 100 and above, first press 1 then the next two numbers of the desired channel.
Picture Button
Press to select an AutoPicture™ control. Choose from four factory-set controls (MOVIES, SPORTS, WEAK SIGNAL, and MULTI MEDIA) and a PERSONAL control that you set according to your own prefernces through the onscreen
PICTURE menu. The four factory-set controls will tailor the TV picture so as to enhance the particular type of program you are watiching, or improve the picture of a program that has a weak signal.
M-Link Button
Press to access the onscreen menu for the M-Link feature.
(See the M-Link Instructions for Use that came with your
TV for details and instructions.)
Channel (+) or (–) Buttons
Press to change the tuned channel.
CC Button
Press to select Closed Captioning options within the menu.
(See the Instructions for Use manual for details.)
Clock Button
Press the CLOCK button to access the onscreen Clock menu.
Personal Button
After you’ve followed the easy steps for recording a macro
(a set of up to eight actions) within the M-Link feature, press this button to have M-Link run the macro. (See the M-Link
Instructions for Use that came with your TV for details and instructions.)
Home Movies Button
After you’ve followed the easy steps for setting up your
DVD to work with the M-Link feature, you can press this button to play your DVD discs. (See the M-Link Instructions
for Use that came with your TV for details and instructions.)
Surf Button
Press to select previously viewed channels. You can place up to 10 channels in memory. Then by pressing the SURF button you can quickly view the select channels. (See the “Using the
Channel Surf Control” section in your Instructions for Use manual to see how to select a series of channels using the Surf button.)
Tuner A/B Button
Press to select the signal coming from the ANT IN A or ANT
IN B connection.
Open/Close Button
Press to open or close the DVD drawer for easy loading and unloading of DVD discs.
S
MART
H
ELP
Remember, you can press any button on the front of the TV to turn the TV ON.
The tuned channel number will always briefly appear on the screen when the TV is first turned ON
(and when the channel is changed).
You also can press the
STATUS/EXIT button (on the remote control) to see what channel the TV is on.
H
OW TO
U
SE THE
I
NSTALLATION
F
EATURES
L ANGUAGE
F or or Spanish- and
French-speaking TV owners, an onscreen LAN-
GUAGE option is present.
The LANGUAGE control enables you to set the TVÕs onscreen menu to be shown in either English, Spanish, or
French.
Press the MENU button on the remote control to show the onscreen menu.
PICTURE
SOUND
FEATURES
INSTALL
1
5
2
6
VOL
OK
PROG
RAM
LIST
INCR
. SU
RR.
OPEN
/CLO
SE
TUN
E
ITR/R
EC
VIDE
O
SOUR
CE
STATU
S/EXIT
HOM
E
HOM
E
MOVI
ES
CC
MUTE
PERS
ONAL
CLOC
K
SURF
MEN
U
SLEEP
7
SOU
ND
0
4
M-LI
NK
8
1
TV/VC
R
SW
AP
5
9
PICT
URE
SOU
RCE
2
5
6
ON/O
FF
UP
PIP
CH
DN
POSIT
PIP
ION
FREE
ZE
3
POW
ER
3
CH
4
T UNER M ODE A/B
Y our TV is equipped with two tuners. This allows for easy Picture-In-Picture usage or a dual-signal source such as cable and satellite. The
TUNER MODE A and
TUNER MODE B feature will let you set each tuner for a
CABLE or an ANTENNA signal, or they can be set to
AUTO. The AUTO setting will choose the type of signal detected when the Auto
Program feature is activated.
(See “Auto Program” below.)
Press the MENU button on the remote control to show the onscreen menu.
PICTURE
SOUND
FEATURES
INSTALL
1
7
VOL
PROG
RAM
LIST
INCR
. SU
RR.
OPEN
/CLO
SE
TUN
ER A
/B
ITR/R
EC
VIDE
O
SOUR
CE
STATU
S/EXIT
HOM
MOVI
E
ES
HOM
E
MUTE
CC
PERS
ONAL
CLOC
K
SURF
MEN
U
SLEEP
7
SOU
ND
4
0
8
1
5
SW
AP
2
TV/VC
R
SOU
RCE
ON/O
FF
UP
POSIT
PIP
ION
FREE
ZE
PIP
CH
DN
3
6
9
PICT
URE
M-LI
NK
POW
ER
3
CH
5
2
4
6
Press the CURSOR
DOWN button repeatedly until INSTALL is highlighted.
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
Press the CURSOR
RIGHT button to shift the menu to the left and highlight
LANGUAGE.
S
MART
H
ELP
Remember, the LANGUAGE control makes only the TVÕs onscreen MENU items appear in English, Spanish, or French text. It does not change the other onscreen text features, such as
Closed Captioning (CC), with TV shows.
S
MART
H
ELP
When CABLE is selected, channels 1–125 are available.
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
Press the CURSOR
RIGHT button to highlight the LANGUAGE control options.
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
AUTO
CABLE
ANTENNA
When ANTENNA is selected, channels 2–69 are available.
Press the
STATUS/EXIT button to clear the menu from the screen.
Press the CURSOR
DOWN button repeatedly until
INSTALL is highlighted.
Press the CURSOR
DOWN button until either
TUNER MODE A or TUNER
MODE B is highlighted.
Press the CURSOR
RIGHT button to shift the menu to the left.
Press the CURSOR
RIGHT button tuner options.
to highlight the
With the TUNER
MODE control set to AUTO,
Auto Program (see below) will detect whether or not cable input is present.
If, however, you want to set the TUNER MODE to
CABLE or ANTENNA, press the CURSOR UP or CUR-
SOR DOWN button until either CABLE or ANTENNA is highlighted.
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
ENGLISH
FRANCAIS
ESPANOL
Press the CURSOR UP or CURSOR DOWN button to select ENGLISH,
ESPANOL (Spanish), or
FRANCAIS (French).
Pressing the STATUS/EXIT button on your remote control after making adjustments to the TV will remove the menu from the screen. You also can back out of the menu by repeatedly pushing the
MENU button on your remote control.
Press the
STATUS/EXIT button to clear the menu from the screen.
A
UTO
P
ROGRAM
Y our TV can automatically set itself for local area
(or cable TV) channels. This makes it easy for you to select only the TV stations in your area by pressing the
CHANNEL (+) or (Ð) button.
Press the MENU button on the remote control to show the onscreen menu.
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
Press the CURSOR
DOWN button repeatedly until
INSTALL is highlighted.
Press the CURSOR
DOWN button repeatedly until the AUTO PROGRAM control is highlighted.
Press the CURSOR
RIGHT button to shift the menu to the left. LANGUAGE will be highlighted.
Press the CURSOR
RIGHT button channels.
to start the
Auto Program scanning of
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
SEARCH
Press the
STATUS/EXIT button clear the menu from the screen.
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
CABLE TUN-A
PLEASE WAIT
CHANNEL 12 to
1
6
ROGR
AM L
IST
INCR
. SU
RR.
OPEN
/CLO
SE
VOL
ITR/R
EC
VIDE
O
SOUR
CE
STATU
S/EXIT
HOM
E
HOM
E
MOVI
ES
CC
MUTE
PERS
ONAL
CLOC
K
SURF
MEN
U
SLEEP
7
SOU
ND
4
0
8
1
5
SW
AP
9
PICT
URE
2
TV/VC
R
SOU
RCE
ON/O
FF
UP
PIP
CH
DN
POSIT
PIP
ION
FREE
ZE
3
6
M-LI
NK
POW
ER
3
CH
5
2
4
S
MART
H
ELP
After youÕve run Auto
Program, check out the results. Press the CHANNEL
(+) or (Ð) button and see which channels you can select.
Remember, an antenna or cable
TV signal must first be connected to your TV (see instructions for making connections on page 1 of this guide).
If you want to delete any unwanted channels from the
TVÕs memory, see the ÒCHAN-
NEL EDITÓ section on page 4.
3
H
OW TO
U
SE THE
INSTALLATION F
EATURES
C
HANNEL
E
DIT
C HANNEL EDIT makes it easy for you to add or delete channels from the list of channels stored in the TVÕs memory.
1
VOL
ITR/R
EC
SOUR
CE
STATU
S/EXIT
HOM
E
HOM
E
VIDE
O
MOVI
ES
CC
PERS
ONAL
MUTE
CLOC
K
TUN
ER A
/B
SURF
MEN
U
SLEEP
7
SOU
ND
0
4
M-LI
NK
8
1
TV/VC
R
5
SW
AP
2
6
SOU
RCE
6
PICT
URE
9
ON/O
FF
UP
PIP
CH
DN
PIP
ION
FREE
ZE
3
POW
ER
3
CH
5
2 7
4
6
Press the MENU button on the remote control to show the onscreen menu.
Press the CURSOR
DOWN button repeatedly until INSTALL is highlighted.
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
Press the CURSOR
RIGHT button to shift the menu to the left. LANGUAGE will be highlighted.
Press the CURSOR
DOWN button repeatedly until the CHANNEL EDIT control is highlighted.
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
INSTALL
LANGUAGE
TUNER A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
Press the CURSOR
RIGHT button to access the
CHANNEL EDIT menu.
Press the CURSOR UP or CURSOR DOWN button to scroll through the list of available channels. Or press the number buttons on your remote control to select a specific channel (for example, press 0 and then 2 to select channel 2).
INSTALL
LANGUAGE
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
66 SKIPPED
67 SKIPPED
68 SKIPPED
69 SKIPPED
AV1
With the channel you want to edit selected, press the
CURSOR RIGHT button to mark the channel as SKIPPED.
The channel youÕve marked
SKIPPED will not appear when you are changing from channel to channel while watching TV.
NOTE: When you want to add a channel that has been marked SKIPPED, press the
CURSOR UP or CURSOR
DOWN button to highlight the channel; then press the
CURSOR RIGHT button to remove the word SKIPPED.
S
MART
H
ELP
The channels available for you to edit are the ones that the AUTO PROGRAM feature found through a search of your
TV antenna or cable TV signals. Channels not found during the search are marked SKIPPED.
NAME
T he channel NAME feature allows you to list the
ÒcallÓ letters of your favorite stations beside their channel numbers when they appear on the screen. The TV has in memory a list of the 50 most popular channel names (for example, ABC, NBC, FOX, etc.). You also can enter a custom name (up to five characters).
Press the MENU button on the remote control to show the onscreen menu.
Press the CURSOR
DOWN button repeatedly until INSTALL in highlighted.
Press the CURSOR
RIGHT button to shift the menu to the left. LANGUAGE will be highlighted.
Press the CURSOR
DOWN button repeatedly until the NAME control is highlighted.
Press the CURSOR
RIGHT button to highlight the
NAME options area.
P ress the CURSOR
RIGHT button again ; then press the CURSOR UP or
CURSOR DOWN button to scroll through a list of options for the first character (A through Z, 0 through 9). Press the CURSOR
RIGHT button and repeat for the second, third, fourth, and fifth characters.
After you have selected a name for the channel, press the MENU button to save the name in the TVÕs memory.
Press the
STATUS/EXIT button clear the menu from the screen.
to
7
1
VOL
ITR/R
EC
SOUR
CE
STATU
S/EXIT
HOM
E
VIDE
O
MOVI
ES
HOM
E
CC
PERS
ONAL
MUTE
SURR
.
PEN/C
LOSE
TUN
ER A
/B
SURF
SLEEP
MEN
U
7
SOU
ND
0
4
8
1
5
SW
AP
2
SOU
RCE
ON/O
FF
UP
POSIT
PIP
ION
FREE
ZE
PIP
CH
DN
3
6
9
PICT
URE
M-LI
NK
POW
ER
3
CH
5
2
8
4
6
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER MODE A
INSTALL
AUTO PROGRAM
CHANNEL EDIT
TUNER MODE A
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
INSTALL
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
AutoChron
NAME
INSTALL
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
AutoChron
NAME W-
S
MART
H
ELP
The five characters that the channel NAME feature allows you to input can be letters, a dash character, or the numbers 0 through 9.
WX-
WXY-
WXYZ-
WXYZ3
Up to 5 characters
AutoChron™ utoChron TM can automatA ically set the TVÕs onscreen clock. Because the time is received from a broadcast signal, you must be sure that a cable TV or antenna signal is present before you attempt to use the
AutoChron TM feature.
Press the MENU button on the remote to show the onscreen menu.
Press the CURSOR
DOWN button repeatedly until INSTALL is highlighted.
Press the CURSOR
RIGHT button to shift the menu to the left. LANGUAGE will be highlighted.
Press the CURSOR DOWN button until the AutoChron control is highlighted.
Press the CURSOR UP or CURSOR DOWN button to highlight your correct time zone.
Press the CURSOR
RIGHT button to start the
AutoChron™ feature. Then just follow the onscreen instructions to set the clock.
Press the CURSOR
RIGHT button
Within a few seconds, a menu for choosing your time zone will appear.
to select AUTO.
With your correct time zone highlighted, press the
CURSOR RIGHT button.
Within a few seconds, you will be given the option to choose whether you want to select
Daylight Savings Time.
Press the CURSOR UP or CUSOR DOWN button to navigate through the YES and
NO selection list; then with the item you want to select highlighted, press the CURSOR
RIGHT button.
Follow the onscreen instructions (shown below) to set the AutoChronª time either automatically or manually.
Follow these onscreen instructions to set
AutoChron™ automatically.
PICTURE
SOUND
FEATURES
INSTALL
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
STORE
PICTURE
SOUND
FEATURES
INSTALL
INSTALL
LANGUAGE
LANGUAGE
TUNER MODE A
TUNER MODE B
TUNER MODE A
AUTO PROGRAM
TUNER MODE B
AUTO PROGRAM
CHANNEL EDIT
CHANNEL EDIT
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
SET TIME
AUTO
MANUAL
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
TIME ZONE?
CENTRAL
MOUNTAIN
PACIFIC
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
DAYLIGHT
SAVING TIME?
YES
NO
Follow these onscreen instructions to set
AutoChron™ manually.
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
SET TIME
AUTO
MANUAL
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
ENTER TIME
11:00 AM
NOTE: When setting the clock manually, press the number buttons on the remote control to enter the time.
Don’t forget to set AM or PM with the CURSOR UP or
CURSOR DOWN button.
4
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
SEARCH FOR
TIME . . .
(Please wait)
12 PBS
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
SEARCH FOR
TIME . . .
Time Found
PRESS TO END
INSTALL
TUNER MODE B
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
SEARCH FOR
TIME . . .
Time Found
11:00 AM
