Philips 653-103 TV Antenna User manual

Quick Use and Setup Guide
Projection
Television
TABLE OF CONTENTS
11
12
NOTE: This owner's manual is used with several
different television models. Not all features (and
drawings) discussed in this manual will necessarily match those found with your television set.
This is normal and does not require you contacting your dealer or requesting service.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.
Getting Started
1
2
10
IMPORTANT
3
9
Warning/Important Notice . . . . . . . . . . . . . .1
Making Basic Antenna/Cable Hookups . . . .1
Using the TV Buttons . . . . . . . . . . . . . . . . . . . . . . . .2
Using the Remote Control Buttons . . . . . . . . . . . . . .2
Setting the TV’s On-screen Menu Language . . . . . . .3
Setting the Tuner Mode Control . . . . . . . . . . . . . . . .3
Running Auto Program . . . . . . . . . . . . . . . . . . . . . . .3
Editing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Using AutoChron to Set the TV’s Clock . . . . . . . . . .4
Naming Channels . . . . . . . . . . . . . . . . . . . . . . . . . . .4
4
8
7
6
5
AutoChron, Incredible Surround, SmartPicture, and SmartSound are trademarks of Philips Consumer Electronics Company. Copyright © 2001 Philips Consumer
Electronics Company. All rights reserved.
HOOKING UP YOUR TV (BASIC TV CONNECTIONS)
CABLE TV
CABLE INPUT/CONVERTER
Y
our Cable TV input into
your home may be a
single (75 ohm) cable or a
converter box installation.
In either case, the connection to the TV is very easy.
Just put the threaded end of
the cable signal to the TV’s
antenna plug and screw it
down tightly.
If your Cable TV signal
comes from a single round
cable (75 ohm), then you're
ready to connect to the TV.
If you have a cable converter
box, connect the cable TV signal
to the cable signal IN(put) plug
on the converter.
SMART
HELP
Connect the cable TV cable to
the ANTENNA IN 75Ω plug on the TV.
If you have a cable converter box,
connect the OUT(put) plug from the
converter to the ANTENNA IN 75Ω
(ohm) plug on the TV.
Use the Auto
Program feature to
store in the TV’s memory only the channels
with active broadcast
stations. See page page
3 for details.
2
Cable TV Company
ANTENNA IN 75Ω
Cable TV Signal Input
MONITOR OUT
ANTENNA IN 75Ω
AV1 IN
AV2 IN
ANTENNA IN 75Ω
AV1 IN
AV2 IN
Y
VIDEO
Pb
AUDIO
S-VIDEO
Pr
R
VIDEO
OR
Pb
S-VIDEO
Back of TV
MONO/L
AUDIO
NOTE: The connecting cable
for the converter is supplied
by the cable TV company.
MONITOR OUT
MONO/L
Y
Pr
R
Cable TV
Converter Box
Connection
OUT
IN
Round Cable
75Ω (Ohm)
1
ANTENNA
COMBINATION UHF/VHF
A
combination antenna
receives normal broadcast channels (VHF 2–13
and UHF 14–69). Your connection is easy because
there is only one ANTENNA
IN 75Ω (ohm) plug on the
back of your TV, and that’s
where the antenna goes.
If your antenna has a
round cable (75 ohm) on the
end, then you're ready to connect it to the TV.
If your antenna has flat, twinlead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300- to 75ohm adapter.
Push the round end of
the adapter (or antenna) onto
the ANTENNA IN 75Ω plug on
the back of the TV. If the
round end of the antenna wire
is threaded, screw it down finger tight.
NOTE: For homes with separate UHF and
VHF antennas, you will need an optional combiner to connect to the TV.
U/V
Combiner
ANTENNA IN 75Ω
MONITOR OUT
AV1 IN
AV2 IN
Y
VIDEO
Pb
S-VIDEO
MONO/L
AUDIO
Pr
R
Back of TV
SMART
HELP
To get optional
accessories to make
the connections shown
here, contact your
dealer, or our Parts
Information Center at
1-800-851-8885.
300- to 75-Ohm Adapter
300Ω (Ohm) to
75Ω (Ohm) Adapter
1
2
ANTENNA IN 75Ω
ANTENNA IN 75Ω
MONITOR OUT
AV1 IN
AV2 IN
MONITOR OUT
ANTENNA IN 75Ω
AV1 IN
AV2 IN
Y
VIDEO
Pb
S-VIDEO
MONO/L
AUDIO
Pr
R
Y
Combination VHF/UHF
Antenna
(Outdoor or Indoor)
VIDEO
Twin–Lead
Wire
Pb
OR
S-VIDEO
Back of TV
MONO/L
AUDIO
Pr
R
Round Cable
75Ω (Ohm)
TV TO VCR
BASIC CONNECTION
F
ollow the steps to the
right to connect a
basic antenna or cable TV
signal to a VCR, and then
the VCR to the TV. For
information on other
hookups (possible when
cable/descrambler boxes
are included), refer to the
owner’s manuals for the
VCR and the cable converter.
Connect your antenna
or cable TV signal to the IN
FROM ANT(enna) plug on the
VCR.
Outdoor
VHF/UHF
Antenna
300Ω (Ohm) to
75Ω (Ohm) Adapter
Connect the OUT TO
TV plug on the VCR to the
ANTENNA IN 75Ω plug on
the TV (connecting cable supplied with the VCR).
1
Refer to the owner's
manual included with your
VCR for other possible connections and TV/VCR operating
details.
Round Cable
75Ω (Ohm) Supplied with VCR
2
OR
IN FROM ANT.
OUT TO TV
ANTENNA IN 75Ω
MONITOR OUT
AV1 IN
AV2 IN
Y
VIDEO
Cable TV signal
Pb
S-VIDEO
MONO/L
AUDIO
Pr
ANTENNA IN 75Ω
MONITOR OUT
AV1 IN
AV2 IN
Y
VIDEO
Pb
R
VCR
S-VIDEO
MONO/L
AUDIO
Pr
R
Back of TV
1
3135 035 20212
TV AND REMOTE CONTROL OPERATION
TELEVISION
Press the
POWER/STANDBY button
to turn the TV on. Allow about
10 seconds for the TV power
on.
Press the VOL (+) button to increase the sound level
or the VOL (–) button to
lower the sound level.
Pressing both buttons at the
same time will display the onscreen menu. After you are in
the menu, use these buttons to
make adjustments or selections.
VOL
Press the CH ▼ (down)
or ▲ (up) button to select TV
channels. Use these buttons to
make adjustments or selections
in the on-screen menu.
NOTE: Press three number
buttons on the remote control
for channels 100 or above. For
example: Press 1 then 2 then 5
for channel 125.
Point the remote control
toward the remote sensor window on the TV to use the
remote to operate the TV.
CH
MENU
Remote Sensor
Window
REMOTE
Battery Usage CAUTION—To prevent battery leakage which
may result in bodily injury or damage to the unit:
• Install ALL batteries correctly, + and – as marked on the unit.
• Do not mix batteries: (OLD and NEW or CARBON and
ALKALINE, etc.)
• Remove batteries when the unit is not used for a long time.
1
3
2
BATTERY INSTALLATION
SAP
i+
AV
TV
4
To load the supplied batteries into the remote:
T
SMAR
VCR
ACC
F
SUR
T
SMAR
U
MEN
CH
1. Remove the battery compartment lid
on the back of the remote.
A/CH
PIP
RR.
. SU
INCR
2. Place the batteries (2- AA) in the remote.
Be sure the (+) and (–) ends of the batteries line
up correctly (the inside of the case is marked).
PIP
CH
DN
UP
3. Reattach the battery lid.
Sleep Button
Power Button
Press to set the TV to automatically turn itself off. Press to
set the TV to automatically turn itself off after a period of
time. Choose 15, 30, 45, 60, 90, 120, 180, or 240 minutes
before the TV will automatically turn off.
Press to turn the TV on and off.
SAP Button
AV
A/V Button
TV
Press repeatedly to select the different signal sources connected to the TV.
VCR
TV/VCR/ACC Mode Switch
ACC
Slide to position of TV to control TV functions, VCR to control VCR functions and ACC for cable converter, satellite
receiver, DVD, and laser disc accessory device functions.
i+ (on-screen display) Button
Press to select an SmartSound control. Choose from three
factory-set controls (VOICE, MUSIC, and THEATRE) and
a PERSONAL control that you set according to your own
preferences through the on-screen Sound menu. The three
factory-set controls will tailor the TV sound to enhance the
type of program you are watching.
Press to select Second Audio Program (SAP) if available
with the program you are watching.
SAP
1
2
3
4
5
6
7
8
Clock Button
Press the CLOCK button to access the Timer menu, where
you can manually set the clock.
Number Buttons
9
SMART
SMART
0
Press to see the current channel number on the TV screen.
Also press to clear the TV screen after control adjustments.
SmartSound Button
i+
MENU
SURF
Menu Button
Press for the on-screen menu to appear. Pressing the menu
button after menu selections are made will eliminate the
menu from the display.
CH
SmartPicture Button
Press to select an SmartPicture control. Choose from four
factory-set controls (MOVIES, SPORTS, WEAK SIGNAL,
and MULTIMEDIA) and a PERSONAL control that you set
according to your own preferences through the on-screen
PICTURE menu. The four factory-set controls will tailor
the TV picture to enhance the particular type of program
you are watching or to improve the picture of a program
with a weak broadcast signal.
Surf Button
Press to quickly view a list of up to 10 channels you have
placed in memory. Go to the channels directly from the Surf
screen. (Details are in the Directions for Use manual. )
Cursor Buttons (Left, Right, Up, Down)
Press these buttons to highlight, select, and adjust items on
the TV's on-screen menu.
Volume (+) or (–) Buttons
Press the number buttons to select TV channels. When
selecting single-digit channels, press the number of the
desired channel. The TV will pause for a few seconds and
then tune to the selected channel. (Note: You can also press
0, then the number.) For channels 100 and above, first press
1 then the next two numbers of the desired channel.
CH(annel) Scan (+) or (–) Buttons
INCR. SURR.
Press to change the tuned channel.
PIP
A/CH
Press to adjust the TV sound level.
VCR §§, ■, ©, ©©, II Buttons
Mute Button
Press to rewind, stop, play, fast forward, or pause a videotape.
Press to turn the TV sound off. Press again to return the
sound to its previous level.
Incr. Surr. Button
A/CH Button
PIP CH
UP
DN
Press to toggle between the currently viewed channel and
the previously viewed channel.
Press to select various factory Surround Sound listening
modes.
SMART HELP
PIP Buttons
Press to operate Picture-In-Picture features. See the PIP section in the Directions for Use manual for details.
Remember, you can press any button on the
front of the TV to turn the TV on.
The tuned channel number will always briefly appear
on the screen when the TV is first turned on (and when
the channel is changed).
You also can press the i+ button (on the remote control) to see what channel the TV is on.
2
HOW TO USE THE INSTALLATION FEATURES
LANGUAGE
Press the MENU button
on the remote control to show
the on-screen menu.
or or Spanish- and
French-speaking TV
owners, an on-screen LANGUAGE option is present.
The LANGUAGE control
enables you to set the TVÕs
on-screen menu to be shown
in either English, Spanish, or
French.
F
Press the CURSOR
DOWN button repeatedly
until INSTALL is highlighted.
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
PICTURE
SOUND
FEATURES
INSTALL
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
6
VC
4
7
SM
5
0
M
ME
EN
NU
U
2
5
5
8
AR
T
P
Remember, the LANGUAGE control
makes only the TVÕs on-screen menu items
appear in English, Spanish, or French text. It does
not change the other on-screen text features, such as
Closed Captioning (CC), with TV shows.
4
CH
UR
R.
Press the CURSOR UP
or CURSOR DOWN button
to select ENGLISH,
ESPA„OL (Spanish), or
FRANCAIS (French).
Press the i+ button to
clear the menu from the
screen.
SMART HELP
AR
T
3
R. S
Press the CURSOR
RIGHT button to highlight
the LANGUAGE control
options area.
3
6
9
SM
SA
2
S
SU
UR
RFF
INC
ENGLISH
FRANCAIS
˜
ESPANOL
i+
1
R
AC
C
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
AV
TV
1
Press the CURSOR
RIGHT button to enter the
INSTALL menu.
PIP
A/C
Pressing the i+ button on your remote control after
making adjustments to the TV will remove the menu
from the screen. You also can back out of the menu
by repeatedly pushing the menu button on your
remote control.
H
U
UP
P
PIP
CH
TUNER MODE
Press the MENU button
on the remote control to show
the on-screen menu.
S
et the TUNER MODE
control according to the
type of signal you have connected to the TV: ANTENNA
or CABLE. If you select
AUTO, the TV will automatically detect the type of signal you have connected.
Press the CURSOR
DOWN button repeatedly until
INSTALL is highlighted.
Press the CURSOR
DOWN button once to highlight TUNER MODE.
Press the CURSOR
RIGHT button to enter the
INSTALL menu.
Press the CURSOR
RIGHT button to highlight the
tuner options area.
Press the i+ button to
clear the menu from the
screen.
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
7
AV
TV
1
VC
AC
C
4
7
0
SA
3
6
9
SM
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
P
2
5
8
AR
T
M
ME
EN
NU
U
i+
1
R
SM
Press the CURSOR
DOWN button until the dot
and triangle are to the left of
the option that matches your
signal connection. If you want
the TV to determine the type
of signal, select AUTO.
AR
T
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
AUTO
CABLE
ANTENNA
S
SU
UR
RFF
SMART HELP
3
INC
R. S
CH
UR
R.
2
PIP
A/C
H
U
UP
P
PIP
4
CH
5
When CABLE is
selected, channels 1–125
are available.
6
D
DN
N
When ANTENNA is selected,
channels 2–69 are available.
AUTO PROGRAM
Press the MENU button
on the remote control to show
the on-screen menu.
A
UTO PROGRAM will
scan for and store only
channels with active broadcast stations in th TV’s memory. After you run AUTO
PROGRAM, you can use the
CH(annel) Scan (+,–) buttons to quickly and easily
select stations.
Press the CURSOR
RIGHT button to enter the
INSTALL menu.
PICTURE
SOUND
FEATURES
INSTALL
VC
R
AC
C
SM
4
7
AR
T
M
ME
EN
NU
U
0
8
5
9
SM
P
6
CH
UR
R.
PIP
A/C
H
U
UP
P
PIP
CH
4
Press the i+ button to
clear the menu from the
screen.
Press the CURSOR
RIGHT button to start the
Auto Program scanning of
channels.
SEARCH
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
CABLE
PLEASE WAIT
CHANNEL 12
3
6
AR
T
2
Press the CURSOR
DOWN button repeatedly
until the AUTO PROGRAM
control is highlighted.
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
SA
2
3
R. S
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
i+
1
S
SU
UR
RFF
INC
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
AV
TV
1
Press the CURSOR
DOWN button repeatedly until
INSTALL is highlighted.
5
SMART HELP
After youÕve run Auto
Program, check the
results. Press the CH(annel) (+,
Ð) button and see which channels you can select.
D
DN
N
3
Remember, an antenna or cable
TV signal must first be connected to your TV (see instructions for making connections
on page 1 of this guide).
If you want to delete any
unwanted channels from the
TVÕs memory, see the ÒCHANNEL EDITÓ section on page 4.
HOW TO USE THE INSTALLATION FEATURES
CHANNEL EDIT
HANNEL EDIT makes
it easy for you to add or
delete channels from the list
of channels stored in the
TVÕs memory.
C
Press the MENU button
on the remote control to show
the on-screen menu.
Press the CURSOR
RIGHT button to enter the
INSTALL menu.
Press the CURSOR
RIGHT button to access the
CHANNEL EDIT menu.
Press the CURSOR
DOWN button repeatedly
until INSTALL is highlighted.
Press the CURSOR
DOWN button repeatedly
until the CHANNEL EDIT
control is highlighted.
Press the CURSOR UP
or CURSOR DOWN button
to scroll through the list of
available channels. Or press the
NUMBER buttons on your
remote control to select a specific channel (for example, press 0
and then 2 to select channel 2).
PICTURE
SOUND
FEATURES
INSTALL
8
AV
TV
1
VC
AC
C
SM
4
7
0
6
P
3
6
9
SM
SA
2
5
8
AR
T
M
ME
EN
NU
U
i+
1
R
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
AR
T
S
SU
UR
RFF
3
SU
CH
RR
2
.
PIP
A/C
H
5
4
PC
66
67
68
69
AV1
With the channel you
want to edit selected, press
the CURSOR RIGHT button
to mark the channel as
SKIPPED. The channel youÕve
marked SKIPPED will not
appear when you are changing
from channel to channel while
watching TV.
When you want to add a channel that has been marked
SKIPPED, press the CURSOR UP or CURSOR
DOWN button to highlight
the channel; then press the
CURSOR RIGHT button to
remove the word SKIPPED.
SKIPPED
SKIPPED
SKIPPED
SKIPPED
Press the i+ button to
clear the menu from the
screen.
7
6
H
D
DN
N
AutoChron
Press the MENU button on the remote to show the
on-screen menu.
utoChron can automatically set the TVÕs onscreen clock. Because the
time is received from a
broadcast signal, you must
be sure you have a signal
source connected before you
attempt to use the
AutoChron feature.You will
also need to know the channel number of your Public
Broadcasting Station.
A
Follow these
on-screen
instructions
to set
AutoChron
automatically.
Press the CURSOR
DOWN button repeatedly
until INSTALL is highlighted.
Press the CURSOR
RIGHT button again to
select AUTO. Within a few
seconds, a menu containing
the time zone options will
appear.
Press the CURSOR
RIGHT button to enter the
AutoChron SET TIME area.
INSTALL
LANGUAGE
LANGUAGE
TUNER MODE
AUTO PROGRAM TUNER MODE
CHANNEL EDIT AUTO PROGRAM
CHANNEL EDIT
AutoChron
AutoChron
INSTALL
INSTALL
ENGLISH LANGUAGE
FRANCAIS TUNER
ESPANOL AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
SET TIME
AUTO
MANUAL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
AUTO
MANUAL
ENTER TIME
11:00 AM
When finished, press
the i+ button to clear the
menu from the screen.
INSTALL
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
SET TIME
NOTE: When setting the
clock manually, press the
number buttons on the remote
control to enter the time.
Remember to set AM or PM
with the CURSOR UP or
DOWN button.
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
SET TIME LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AUTO
MANUAL AutoChron
Use the NUMBER buttons on your TV remote to
enter the channel number for
your PBS station.
NOTE: If you enter the wrong
channel number for your PBS
station, the time will not be
found and you will be prompted to enter another channel
number.
Press the CURSOR UP
or DOWN button to highlight your correct time zone.
Then press the CURSOR
RIGHT button. Go through
the same process for the
Daylight Savings time option.
Press the CURSOR
RIGHT button to enter the
INSTALL menu.
PICTURE
SOUND
FEATURES
INSTALL
Follow these
on-screen
instructions
to set
AutoChron
manually.
Press the CURSOR
DOWN button until the
AutoChron control is highlighted.
TIME ZONE?
CENTRAL
MOUNTAIN
PACIFIC
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
DAYLIGHT
SAVING TIME?
YES
NO
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
SEARCH FOR
TIME
ENTER CHANNEL
02
PBS
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
SEARCH FOR
TIME
PLEASE WAIT
15 PBS
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
SEARCH FOR
TIME
TIME FOUND
PRESS EXIT TO END
11:15 AM
NAME
he channel NAME feature allows you to list
the ÒcallÓ letters of your
favorite stations beside their
channel numbers when they
appear on the screen. The
TV has in memory a list of
the 50 most popular channel
names (ABC, NBC, FOX, for
example). You can also enter
a PERSONAL name of up to
five characters.
T
Press the MENU button
on the remote control to show
the on-screen menu.
Press the CURSOR
DOWN button repeatedly until
the NAME control is highlighted.
Press the CURSOR
DOWN button repeatedly until
INSTALL in highlighted.
Press the CURSOR
RIGHT button to highlight the
NAME options area.
Press the CURSOR
RIGHT button to enter the
INSTALL menu.
PICTURE
SOUND
FEATURES
INSTALL
1
AV
TV
VC
R
AC
C
SM
4
7
AR
T
M
ME
EN
NU
U
0
8
i+
1
SA
P
2
5
6
9
SM
3
8
LANGUAGE
TUNER MODE A
TUNER
MODE B
INSTALL
AUTO PROGRAM
LANGUAGE
CHANNEL EDIT
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
AR
T
INSTALL
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
NAME
PERSONAL
If you want to create
your own personal name for
the channel or edit a name you
chose previously, press the
CURSOR RIGHT button to
choose a PERSONAL option.
Then press the CURSOR UP
or DOWN button to select the
first character of the name.
You can input up to four more
characters in creating the
name. Press the MENU button
after you finish.
INSTALL
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
AutoChron
NAME
S
SU
UR
RFF
INC
R. S
R.
PIP
A/C
H
U
UP
P
PIP
CH
D
DN
N
3
2
Press the i+ button to
clear the menu from the
screen.
WXWXY-
CH
UR
PERSONAL
If you want to choose
from among the preset list of
name options, press the
CURSOR UP or DOWN
button to highlight the choice
you would like to select for
the name. Then press the
CURSOR RIGHT button.
4
7
WXYZ-
5
WXYZ3
6
SMART HELP
The five characters that the channel NAME feature allows you to
input can be letters, a dash character, or the numbers 0 through 9.
4
Up to 5 characters

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project