MPD8610 O/M.QXD 8/12/02 11:27 AM Page 23

MP3 PERSONAL COMPACT DISC

PLAYER WITH 45 SECOND DIGITAL ANTI

SKIP PROTECTION

MODEL: MPD8610

BEFORE OPERATING THIS PRODUCT, PLEASE

READ THESE INSTRUCTIONS COMPLETELY.

OPERATING INSTRUCTIONS

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 1

SAFETY PRECAUTIONS

DANGEROUS VOLTAGE

The lightning fl ash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

ATTENTION

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

DANGER:

This product utilizes a Class 1 laser to read Compact

Discs. This laser Compact Disk Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated.

Invisible and hazardous laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. Please do not attempt to defeat or bypass the safety switches.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

SURGE PROTECTORS:

It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product.

1

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 2

SAFETY PRECAUTIONS

• Do not open the CD compartment while the CD is rotating.

• Always keep the CD compartment closed when not in use.

• Keep all foreign objects out of the CD compartment.

• Place the unit on a stable surface.

• Avoid installing the unit is locations described below:

• Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.

• On top of other stereo equipment that radiates too much heat.

• Placed lacking ventilation or dusty places.

• Places subject to constant vibration.

• Humid or moist places.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

2

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 3

LOCATION OF CONTROLS

11

1

8

9

10

14

15

16

17

18

Many of the buttons have dual functions, meaning they will perform one function in the Normal mode and a different function in the File Search mode. The descriptions on the following page will indicate the function while in the Normal mode, followed by the function in the File Search mode (if applicable).

3

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 4

LOCATION OF CONTROLS (CONTINUED)

No. Name

1 Display

2 STOP

Normal Mode

LCD Function Display

Stops CD play, clears a program. Also turns the unit off.

File Search

2,D,E,F

3 PLAY/PAUSE Turns the unit on. Also starts and pauses playback.

4 LINE OUT Jack Connect to an external amplifier, such as a car stereo.

5 MODE Cycles between RANDOM,

1,A,B,C

5,M,N,O

INTRO,REPEAT A,REPEAT1.

6 PHONES Jack Connect 3.5mm headphones.

7 PROG/EQ Memorizes & reviews programs. 6,P,Q,R,S

EQ: Cycles between the

8

9

VOLUME

ESP

Equalizer modes.

Adjusts the volume.

E lectronic S hock P rotection 7,T,U,V

10 RESUME ensures continuous playback.

CD: Continues playback from 8,W,X,Y,Z last track played.

MP3: Continues playback from last position played.

11 DC4.5V Jack Use with external Power Supply.

12 SKIP/SEARCH+ Press & release:Skip forward.

3,G,H,I

Press & hold: Search forward.

13 SKIP/SEARCH– Press & release:Skip backward. 4,J,K,L

Press & hold: Search backward.

14 Battery Insert Batteries, see

Compartment page 5.

15 FILE SEARCH Search for MP3 files.

ENTER

16 DISPLAY

17 FILE/DIR.

18 OPEN Switch

MP3 Display select

Locate MP3 file

Slide to the right to open the CD compartment.

0, CLEAR

9, SPACE

4

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 5

INSTALLATION

This CD player can be powered by either 2 “AA” batteries or the provided AC adapter.

AC Operation

To operate the unit using AC power, connect an AC adapter (not included) to the DC4.5V jack on the rear of the CD Player and to a wall outlet having 120V, 60Hz AC only. The batteries are automatically disconnected when the AC adapter is used.

NOTE : There is no AC adapter provided with this unit.

Battery Installation

Batteries need to be replaced when “LOW BATTERY” appears in the display. Fresh Alkaline batteries will last approximately 8 hours with a standard music CD and 10 hours with an MP3 CD.

1. Open the battery compartment door on the bottom of the unit by sliding it out and then lifting it. To prevent the possibility of losing the cover, it cannot be removed.

2. Insert two (2) “AA” batteries (not included) according to the polarity diagram. Alkaline batteries are recommended for longer playing time.

+

+ –

–

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Do not mix different types of batteries together (e.g. Alkaline and

Carbon-zinc) or old batteries with fresh ones.

2. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

3. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

5

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 6

INSTALLATION (CONTINUED)

Playback Through a Home Audio System:

By using a home audio connection cable, superb CD sound can be heard through your home audio system. Before making any connections, turn off the power to all equipment.

Plug a connection cable (not included) between the LINE OUT jack on the side of the CD player and the ampli fi er’s CD or AUX input jacks. (Do not connect it to the ampli fi er’s PHONO jacks.)

NOTE: If the CD player interferes with TV or radio reception, move the CD player away from the TV or radio or turn off the power to the CD player.

Headphones:

Connect the supplied headphones into the green PHONES

(Headphones) jack.

VOLUME Level:

You can adjust the digital volume level from “00” to “32” by pressing the VOLUME UP or DOWN button.

Preset Equalizer:

WHILE A CD IS PLAYING, press the PROG/EQ button to cycle through the EQ settings (NORMAL, CLASSIC, POP, JAZZ and ROCK).

Use your common Sense when using headphones:

• Hearing Safety: Do not play your unit at high volume. Hearing experts advise against continuous extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

• Traffic Safety: Do not use while operating a motor vehicle. It may create a traffic hazard and it is illegal in many areas. You should use extreme caution or temporarily discontinue use in potentially hazardous situations. Even if your headset is an open-air type designed to let you hear outside sounds, do not turn up the volume so high that you can’t hear what’s around you.

6

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 7

OPERATION

TO INSERT AND PLAY A CD

This CD player is designed to play all kinds of Audio Discs and

MP3 CD ROMS, such as CD recordables and rewritables. Do not try to play CDI, CDV, DVD or computer CDs.

1

1

2

2

Press the PLAY/PAUSE button ❶ to turn the unit on.

Open the CD compartment lid by sliding the OPEN switch ❷ .

Gently press a disc, label side up, onto the spindle until it locks in place.Close the CD compartment lid; the total tracks and playing time (and folders, if using MP3) will appear in the display.

3 4

Press the PLAY/PAUSE button to begin playback; the current track, elapsed playing time and equalizer (and folder, if using MP3) will appear in the display.

1

2

Adjust the VOLUME ❶ and

EQ button ❷ as desired; the volume level will be shown on the display.

7

When the disc is through playing, it will stop. Press the STOP button to stop the disc before it is finished. Press the STOP button again to turn the unit off.

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 8

OPERATION (CONTINUED)

CD PLAYBACK NOTES:

• See page 15 for more information on MP3’s.

• When recording (“burning”) CDs, make sure the session is “finalized”, or simply record (“burn” only one session). You can find more information on “finalizing” in your CD recorder’s manual.

• This unit is capable of playing standard CDs or 3” singles; no adapter is required.

• If a disc is inserted incorrectly, dirty, damaged or not present at all,

“no disc” will appear in the display.

• If a disc is not recorded properly, a disc error will occur.

• Playback will stop when you open the CD compartment, but it is not recommended to open the compartment before the STOP button is pressed.

• If there is no activity for 60 seconds, the unit will turn itself off to save the batteries.

• It may take 10 to 30 seconds for the player to read an MP3 CD and begin playback, depending on the number of tracks burned on the CD.

CD PAUSE CONTROL

1 2

During CD playback, if you wish to pause the disc momentarily, press the

PLAY/PAUSE button. Playback stops but the disc continues to spin and the elapsed time flashes in the Display.

8

Press the PLAY/PAUSE button again to release Pause and resume playback. The sound returns and the elapsed time in the Display stops flashing.

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 9

OPERATION (CONTINUED)

TO BEGIN PLAYBACK FROM A SPECIFIC TRACK

1 2

After you insert the disc into the CD player and the total number of tracks appear on the display, you may press either the SKIP/SEARCH

➛➛ or ❿❿ button to select a specific track for playback.

When the desired track number (and file number if using MP3) appears in the display, press the PLAY/

PAUSE button. Playback will begin with the track (or file) you selected.

FORWARD/REVERSE SKIP TRACK

1 2

During playback, press and release the SKIP/SEARCH

❿❿ button once to advance the player to the beginning of the next track. Press the

SKIP/SEARCH ❿❿ button repeatedly to advance the player to higher number tracks.

During playback, press and release the SKIP/SEARCH ➛➛ button once to move the player back to the beginning of the currently playing track. Press the SKIP/SEARCH ➛➛ button repeatedly to move the player back to lower numbered tracks.

9

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 10

OPERATION (CONTINUED)

HIGH-SPEED MUSIC SEARCH

1 During playback, depress and hold either the SKIP/SEARCH ➛➛ or

❿❿ button to move the player forward or backward within a track to locate a specific musical passage. The player will move forward or backward at high speed as long as the buttons are depressed. When you release the

SKIP/SEARCH button, normal playback will resume at that point.

REPEAT PLAYBACK OF ONE TRACK

1

2

2

2

1 2

1

To repeat a single track, press the MODE button ❶ once; “REP 1” will appear in the display. Press the

SKIP/SEARCH ➛➛ or ❿❿ button ❷ to select the specific track that you wish to repeat.

When the desired track number appears in the display, press the PLAY/PAUSE button

❶ to begin playback. The specific track you selected will be repeated continuously. To cancel Repeat playback, press the MODE button ❷ repeatedly until the mode indicator disappears.

10

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 11

OPERATION (CONTINUED)

REPEAT PLAYBACK OF ALL TRACKS ON A CD

1 2

1

2

To repeat all the tracks on the

CD, press the MODE button twice; “REP A” will appear in the display.

Press the PLAY/PAUSE button

❶ to begin playback. All tracks on the disc will be repeated continuously. To stop Repeat playback, press the MODE button ❷ repeatedly until the mode indicator disappears.

REPEAT PLAYBACK OF A FOLDER (MP3 w/folders only)

1 2

2

2

1 2

1

To repeat all files in a directory

(MP3 CD only), press the

MODE button ❶ 3 times;

“REP D” will appear in the display. Press the

SKIP/SEARCH ➛➛ or ❿❿ button ❷ to select the specific folder that you wish to repeat.

11

Press the PLAY/PAUSE button

❶ to begin playback. All files in the selected directory will be repeated continuously. To stop

Repeat playback, press the

MODE button ❷ repeatedly until the mode indicator disappears.

See page 15 for more info on

MP3 format.

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 12

OPERATION (CONTINUED)

INTRO PLAYBACK

(Will play the first 10 seconds of each track)

1 2

1 2

While in the Stop mode, press the MODE button 3 times (4 times if an MP3 CD with multiple directories is inserted); “INT” will appear in the display.

Press the PLAY/PAUSE button

❶ to begin Intro playback. The first 10 seconds of all tracks on the disc will be played in sequence. Press the STOP button ❷ to stop Intro playback.

TO RANDOMLY PLAY BACK A CD

1 2

1 2

While in the Stop mode, press the MODE button 4 times (5 times if an MP3 CD with multiple directories is inserted); “RND” will appear in the display.

Press the PLAY/PAUSE button ❶ to begin playback.

The unit will play all the tracks in random order. When all the tracks have been played, the unit will stop.

Press the STOP button ❷ to stop Random playback.

12

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 13

OPERATION (CONTINUED)

TO PROGRAM THE MEMORY (UP TO 24 TRACKS)

Programming is the ability to preselect the order in which a series of tracks will be played.

1 2

1 2

While in the Stop mode, press the PROG/EQ button. The track number will blink and “P-

01” will appear in the display. If using a MP3 disc, see the notes on page 14.

Select a track to be programmed by directly entering it. For example, press

PLAY/PAUSE/1 ❶ and

STOP/2 ❷ to enter in track number 12.

NOTE: If an error is made while programming, hold the

DISPLAY/CLEAR button for 2 seconds to clear the memory.

3 4

2

1

Press the FILE SEARCH/

ENTER button to memorize the track. Repeat steps 2 and

3 to program additional tracks up to a maximum of 24 tracks.

Press the FILE SEARCH/

ENTER button ❶ again to finalize the program. Press the PLAY/PAUSE button ❷ to begin program playback.

See the top of the following page for notes on Program playback.

13

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 14

OPERATION (CONTINUED)

NOTES ON PROGRAM PLAYBACK

• MP3: If an MP3 CD is inserted, you will first select the directory number in step 1, and then the file.

• You can review the program by pressing the PROG/EQ button, then the SKIP/SEARCH button when playback is stopped.

• Press the REPEAT button twice during program playback to repeat the program repeatedly until the STOP button is pressed.

• Press the STOP button to stop and cancel the program before it is finished (the Program memory will be kept).

• Each file may be stored in the program memory as many times as desired (up to 24 files).

• If an error is made while programming, hold the

DISPLAY/CLEAR button for 2 seconds to clear it.

ESP (ELECTRONIC SKIP PROTECTION)

This feature protects against loss of sound caused by vibrations and shocks. Continuous playback is ensured once some of the music has been stored into memory.

ESP will automatically be activated when listening to standard or

MP3 CDs. You cannot deactivate ESP while listening to an MP3

CD. However, you can deactivate it when playing a standard CD by simply pressing the ESP button; the ESP indicator will disappear from the display. Deactivating the ESP will conserve battery life.

RESUME

This will allow you to resume playback of a CD that was previously stopped. If you stopped a CD in the middle of playing, simply press the RESUME button and the CD will continue at the start of the last played track location where the CD was stopped.

14

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 15

OPERATION (CONTINUED)

MP3 FAQs - Frequently Asked Questions

Please read before playing an MP3 CD.

Does the unit support packet write CD-RW?

Yes it can, you can ad or delete MP3 files without reformatting. It appears like a PC hard drive.

Can the unit read regular music CDs?

Yes it can. However you can not mix MP3s and WAV files on the same CD. If you do this your Portable MP3 CD Player will play only the MP3 files.

Does the unit have Electronic Skip Protection built-in?

Yes it has an anti-shock buffer (45 seconds for standard CD and

120 seconds for MP3 CD). What it means for the everyday user is that it can withstand road bumps, shaking, etc. There will be no skipping when you jog, or run on a tread mill or drive on a bumpy road.

Can I use the MP3 extension for non-audio data files?

No, this may result in serious malfunction and harmful noise interference.

Can I mix MP3 files with other file types on the CDR?

Yes, but your Portable MP3 CD Player will ignore those files and read only the MP3 files on the CDR.

Does the unit support multi-session CDRs?

If the MP3 CD is not finalized, you can burn a new group of MP3 files until the CD is full.

Does the unit support subdirectories (subfolders)?

Yes, the unit can read MP3 files from subfolders.

What appears on the display when playing back MP3 CDs??

The album, title and artist (if set when MP3 was recorded).

15

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 16

OPERATION (CONTINUED)

MP3 FAST FILE SELECT

If an MP3 CD without Multiple Directories is inserted, you can directly enter the desired file number as follows:

1 2

2 3

2

1

1

While the unit is in the Stop mode, press the FILE/DIR.

button ❶ once; the file number will blink. Then, press the ENTER button ❷ .

Select a file by directly entering it. For example, press PLAY/

PAUSE/1 ❶ and STOP/2 ❷ to enter in file number 12. Press the ENTER button ❸ to begin playback from that file.

MP3 FAST DIRECTORY SELECT

If an MP3 CD with Multiple Directories is inserted, you can directly enter the directory number as follows:

1 2

1

2 2

1

While the unit is in the Stop mode, press the FILE/DIR.

button ❶ twice; the directory number will blink. Then, press the ENTER button ❷ .

16

Select a directory by directly entering it. For example, press

STOP/2 ❶ to enter in directory number 2. Press the ENTER button ❷ to begin playback of that directory.

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 17

OPERATION (CONTINUED)

MP3 SELECTING SONGS BY TITLE

You can search for a song by title, using the letter buttons to enter the name of the song.

First, press the FILE SEARCH/ENTER button, followed by the appropriate letters to enter the name of the song. Remember that each letter button can enter 4 or 5 letters/numbers depending on the number of times you press the button. If you press the 1ABC button once, the number “1” appears. Press twice for “A”, 3 times for “B” and 4 times for “C”. For example, if the first word in the song title is

“Funny”, you would enter the word “Funny” on the display as follows:

1 2

1

2

Press the FILE SEARCH/

ENTER button once.

Press the STOP/2DEF button

❶ 4 times to select the letter

“F”, then press the FILE

SEARCH/ENTER button ❷ to enter the “F” and move the cursor to the next position.

3

1

2

Press the ESP/7TUV button

❶ 3 times to select the letter

“U”, then press the FILE

SEARCH/ENTER button ❷ to enter the “U” and move the cursor to the next position.

17

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 18

4

5

OPERATION (CONTINUED)

Continue to enter the word “Funny” as follows:

“N’-Press MODE/5MNO button 3 times, press FILE SEARCH/ ENTER.

“N’-Press MODE/5MNO button 3 times, press FILE SEARCH/ ENTER.

“Y’-Press 8WXYZ button 4 times, press FILE SEARCH/ ENTER.

When done entering the title, press the FILE SEARCH button once again and the player will search for the title.

Once found, playback will begin automatically.

To insert a space between 2 words in a song title, press the

9/SPACE button twice.

It may not be necessary to enter the entire song title to select the song. After entering the first few letters as described above, press the FILE SEARCH/ENTER button again. The player will search the disc for a song that begins with those letters and playback begins automatically if it finds only one song. If the player finds more than one song that begins with the same letters, the display will show the list of songs. Use the SKIP/SEARCH ➛➛ or ❿❿ button to scroll through the list, and press the ENTER button when the desired song is blinking to play it.

MP3 SELECTING DIRECTORIES BY TITLE

You can search for a directory by title, using the letter buttons to enter the name of the directory.

Simply press the FILE SEARCH/ ENTER button twice, then follow the the instructions for steps 2 to 5 in the Selecting Songs

By Title section.

18

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 19

OPERATION (CONTINUED)

SINGLE SESSION

The following chart is an example of a Windows Explorer display that will appear on your computer monitor for a single session MP3 CD ROM with Folders/Albums. Check the added notes to help you understand the MP3 CD unit display and the playback sequence of folders/albums and tracks on a single session MP3 CD .

MULTI SESSION

The computer user does not need to finalize the CDR disc as music is burned on the CD. Because of this, the music can be downloaded at different times until the whole CD is full.

(E) CD-ROM drive

Directory 01

Blur01.mp3

Blur02.mp3

Blur03.mp3

Blur04.mp3

Directory 02

Spice05.mp3

Spice06.mp3

Directory 03

2men07.mp3

2men08.mp3

Skipped

Abba01.wav

Abba02.wav

Skipped

Blur.jpg

Lyric.doc

Directory 04

Girl09.mp3

Girl10.mp3

Directory 05

Boyz11.mp3

Boyz12.mp3

Directory 06

Bread13.mp3

Directory 07

Marx14.mp3

Twain15.mp3

See the following page for notes regarding this diagram.

19

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 20

OPERATION (CONTINUED)

ABOUT THE DIAGRAM ON THE PREVIOUS PAGE:

•

The arrow pathway shows the sequence of MP3 directory and file playback.

• This example has a total of 7 MP3 directories.

• Based on this layout, the first file will be “Blur01.mp3” and the last file will be “Twain15.mp3”.

• “Skipped” denotes a directory which contains non-audio files only, e.g. jpg, wav, etc. These cannot be detected nor played on this player. When an album contains mixed format files, the non-MP3 files will be skipped.

SPECIFICATIONS:

MPEG Rate .....................................................32-384Kbps

Sampling Frequency ...........8/11.025/12KHz for MPEG2.5

..........................................16/22.05/24KHz for MPEG2

............................................32/44.1/48KHz for MPEG1

MP3 Playback .........................ISO9660 format compatible

Check the CD burner/recorder’s documentation to see if it complies with these specifications.

FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE

VISIT OUR WEBSITE AT WWW.MEMCORPINC.COM OR CONTACT

CUSTOMER SERVICE AT 1-800-919-3647

PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS

IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE

OF PURCHASE OR MEMOREX.

FOR PARTS AND ACCESSORIES, CONTACT FOX INT’L AT 1-800-321-6993.

20

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 21

TROUBLESHOOTING GUIDE

Should this unit exhibit a problem, check the following before seeking service.

SYMPTOM

Unit will not turn on.

CD will not play.

Erratic playback.

Playback does not start from track 1.

No sound, or poor sound.

POSSIBLE CAUSE

Batteries inserted incorrectly.

Batteries dead or weak.

Power connection loose, or not connected.

Power not on.

CD compartment not closed.

Disc inserted incorrectly.

Dirty or defective CD.

Condensation is on the lens.

Dirty or defective CD.

Error in the MP3 recording of the CD.

Unit locks up.

The Resume or Program function was activated.

Headphone or Line Out plugs not inserted properly.

The volume is set too low.

Plugs are dirty.

POSSIBLE SOLUTION

Insert batteries correctly.

Replace batteries.

Properly connect AC adapter securely.

Press the PLAY/PAUSE button to turn the power on.

Close CD compartment door.

Insert disc correctly.

Try another CD.

Wait until the lens has cleared.

Try another CD.

This is an error with the

CD/burner, not the unit. Try another CD.

Press and hold the

DISPLAY/CLEAR button for

2 seconds to reset.

Clear the program, and do not start with the resume function.

Check connections.

Raise the volume.

Clean plugs and reinsert.

21

MPD8610 O/M.QXD 8/12/02 11:27 AM Page 22

Memcorp, Inc.

Weston, Fl

Printed in Hong Kong

Visit our website at www.memcorpinc.com