Advertisement
Advertisement
ENGLISH
Digital Video Camcorder
SC-D351/D352/D353/
D354/D355
AF
Auto Focus
CCD
Charge Coupled Device
LCD
Liquid Crystal Display
Owner’s Instruction Book
Before operating the unit, please read this
Instruction Book thoroughly, and retain it for future reference.
SC-D351/D352/D353/
D354/D355
AF
CCD
LCD
, ,
,
AD68-00839F
ENGLISH
Contents
Notes and Safety Instructions .............................................. 6
Getting to Know Your Camcorder ..................................... 11
Features .............................................................................................................. 11
Accessories Supplied with Camcorder .................................................................12
Front & Left View ...................................................................................................13
Left Side View........................................................................................................14
Right & Top View ...................................................................................................15
Rear & Bottom View..............................................................................................16
Remote Control (SC-D354/D355 only) .................................................................17
Preparation ......................................................................... 18
Adjusting the Hand Strap ......................................................................................18
Hand Strap ..................................................................................................... 18
When You carry Your Camcorder ....................................................................18
Attaching the Lens Cover................................................................................18
Lithium Battery Installation....................................................................................19
Battery Installation for the Internal Clock........................................................19
Battery Installation for the Remote Control (SC-D354/D355 only) ................19
Connecting a Power Source .................................................................................20
To use the AC Power Adapter and DC Cable................................................20
To select the Camcorder Mode (SC-D353/D354/D355 only) ........................20
Using the Lithium Ion Battery Pack ......................................................................21
Charging the Lithium Ion Battery Pack...........................................................21
Table of continuous Recording Time based on Model and Battery Type ......22
Battery Level Display ......................................................................................23
OSD (On Screen Display in Camera/Play Modes)...............................................24
OSD (On Screen Display in M.Cam/M.Player Modes)
(SC-D353/D354/D355 only) ..................................................................................25
Turning the OSD (On Screen Display) On/Off ....................................................25
System Menu Setting .......................................................... 26
Selecting the OSD Language ...............................................................................26
Setting the Clock ...................................................................................................27
Setting the Wireless Remote Control Acceptance (Remote) (SC-D354/D355 only) ..28
Setting the Beep Sound ........................................................................................29
Setting the Shutter Sound (SC-D353/D354/D355 only).......................................30
Viewing the Demonstration ...................................................................................31
Display Menu Setting.......................................................... 32
Adjusting the LCD Screen.....................................................................................32
Displaying the Date/Time ......................................................................................33
Setting the TV Display...........................................................................................34
..............................................................6
........................................................11
........................................................................................................................11
..................................................................................12
.....................................................................................................13
....................................................................................................................14
(
.....................................................................................................15
.....................................................................................................16
SC-D354/D355) .................................................................................17
......................................................................................18
................................................................................................................18
..................................................................................................................18
................................................................................................18
....................................................................................................18
............................................................................................................19
.....................................................................................19
( SC-D354/D355) .............................................................19
. ...............................................................................................................20
..................................................................20
( SC-D353/354/D355) ......................................................20
.................................................................................................21
.........................................................................................21
...................................................22
............................................................................................23
OSD(
OSD( M.Cam/M.Player
(
) ....................................................................24
)( SC-D353/D354/D355) .25
/ OSD( )......................................................................................25
.......................................................................26
..............................................................................................26
................................................................................................................27
Remote(
Beep Sound(
SC-D354/D355).............................................................28
)......................................................................................29
Shutter Sound(
Demonstration(
) ( SC-D353/D354/D355).....................................30
)...............................................................................31
...................................................................32
.........................................................................................................32
Date/Time(
TV Display(
/ ) ....................................................................................33
).....................................................................................34
ENGLISH
Contents
Basic Recording................................................................... 35
Using the Viewfinder .............................................................................................35
Adjusting the Focus ........................................................................................35
Inserting and Ejecting a Cassette.........................................................................36
Hints for Stable Image Recording.........................................................................37
Recording with the LCD Screen.....................................................................37
Recording with the Viewfinder ........................................................................37
Various Recording Techniques..............................................................................38
Making your First Recording .................................................................................39
Using EASY.Q Mode (for Beginners)....................................................................40
Record Search (REC SEARCH) ....................................................................41
Setting the Zero Memory (SC-D354/D355 only) ..................................................42
Self Record using the Remote Control (SC-D354/D355 only).............................43
Zooming In and Out ..............................................................................................44
Using the Tele Macro ............................................................................................44
Using the Fade In and Out....................................................................................45
To Start Recording ..........................................................................................45
To Stop Recording (use Fade In/Fade Out) ...................................................45
Using Back Light Compensation Mode (BLC)......................................................46
Using the Color Nite Shutter .................................................................................47
Using the Color Nite Shutter with LED Light (SC-D352/D354/D355 only) ..........48
Nite Pix (0 lux recording) (SC-D352/D354/D355 only) .......................................49
Power Nite Pix (SC-D352/D354/D355 only) .........................................................50
Advanced Recording........................................................... 51
Use of various Functions ......................................................................................51
Setting Menu Items.........................................................................................51
Availability of Functions in each Mode ...........................................................53
Selecting the Record Mode ..................................................................................54
Selecting Audio Mode ...........................................................................................55
Cutting Off Wind Noise (Wind Cut).......................................................................56
Setting the Shutter Speed & Exposure.................................................................57
Recommended Shutter Speeds when Recording .........................................57
Auto Focus/Manual Focus.....................................................................................58
Auto Focusing .................................................................................................58
Manual Focusing.............................................................................................58
Setting the White Balance.....................................................................................59
Using Quick Menu: White Balance .................................................................60
Setting the Digital Image Stabilizer (DIS) .............................................................61
Using Quick Menu: Digital Image Stabilizer (DIS) .........................................62
Programed Automatic Exposure Modes (Program AE) .......................................63
Setting the Program AE..................................................................................64
Using Quick Menu: Program AE.....................................................................64
........................................................................35
Viewfinder ( )........................................................................................35
...........................................................................................................35
.................................................................................................36
.........................................................................................................37
................................................................................................37
....................................................................................................37
.........................................................................................................38
EASY. Q (
................................................................................................................39
) ( ).....................................................................40
(REC SEARCH)........................................................................41
Zero Memory ( ) ( SC-D354/D355)........................................42
(
Zooming In and Out (
SC-D354/D355) .................................................................43
) ........................................................................44
................................................................................................................44
Fade In and Out ( ) ..............................................................................45
...........................................................................................................45
BLC (
( / ) .................................................................................45
) ..............................................................................................46
.................................................................................................47
(0 LUX
Power Nite Pix (
LED (
) (
SC-D352/D354/D355) .....................................48
SC-D352/D354/D355) .............................................49
) ( SC-D352/D354/D355)................................50
........................................................................51
.....................................................................................................51
................................................................................................51
.....................................................................................53
Rec Mode (
Audio Mode (
) ....................................................................................54
)..................................................................................55
Wind Cut ( ) .............................................................................................56
Shutter Speed & Exposure ( ) ..............................................57
.................................................................................57
Auto Focus /Manual Focus ( / ) .................................................58
...........................................................................................................58
...........................................................................................................58
White Balance (
:
) .................................................................................59
........................................................................................60
DIS (Digital Image Stabilizer )......................................................61
: DIS (Digital Image Stabilizer ) ................................62
(Program AE). ................................................................................63
(Program AE).....................................................................64
: (Program AE)....................................................64
ENGLISH
Contents
Applying Digital Effects..........................................................................................65
Selecting the Digital Effects ............................................................................66
Zooming In and Out with Digital Zoom.................................................................67
Setting the Digital Zoom .................................................................................67
Photo Image Recording ........................................................................................68
Searching for a Photo Image..........................................................................68
Playback.................................................................................. 69
Playing Back a Tape You have recorded on the LCD Screen ..............................69
Adjusting the LCD Bright/Color during Playback ...........................................69
Controlling Sound from the Speaker ....................................................................70
Tape Playback .......................................................................................................71
Playback on the LCD Screen .........................................................................71
Playback on a TV Monitor...............................................................................71
Connecting to a TV which has Audio/Video Input Jacks ...............................71
Connecting to a TV which has no Audio and Video Input Jacks ...................72
Playback..........................................................................................................72
Various Functions while in Player Mode...............................................................73
Playback Pause ..............................................................................................73
Picture Search (Forward/Reverse) .................................................................73
Slow Playback (Forward/Reverse) (SC-D354/D355 only) .............................73
Frame Advance (To play back frame by frame) (SC-D354/D355 only)............74
X2 Playback (Forward/Reverse) (SC-D354/D355 only).................................74
Reverse Playback (SC-D354/D355 only) .......................................................74
Zooming during Playback (PB ZOOM) .................................................................75
AV In/Out (SC-D355 only).....................................................................................76
Audio Dubbing (SC-D354/D355 only)...................................................................77
Dubbing Sound ...............................................................................................77
Dubbed Audio Playback ........................................................................................78
IEEE 1394 Data Transfer......................................................... 79
USB Interface (SC-D352/D353/D354/D355 only)............... 81
Digital Still Camera Mode (SC-D353/D354/D355 only)...... 87
Memory Stick (Optional Accessory) .....................................................................87
Memory Stick Functions .................................................................................87
Inserting and Ejecting the Memory Card .......................................................88
Structure of Folders and Files on the Memory Card .....................................89
Image Format..................................................................................................89
Selecting the Camcorder Mode ............................................................................89
Selecting the Built-in Memory (SC-D354/D355 only)...........................................90
Using Quick Menu: Memory Type...................................................................90
Digital Effects ...........................................................................65
............................................................................................66
Digital Zoom( ) ...............................................................67
....................................................................................................67
................................................................................................................68
...........................................................................................................68
.......................................................................................69
..........................................................................................69
/ .....................................................................69
.................................................................................................70
............................................................................................................71
............................................................................................71
.......................................................................................................71
A/V
A/V
............................................................71
....................................................................72
........................................................................................................................72
Player ( ) ............................................................................73
( /
(
...........................................................................................................73
...................................................................................73
) ( SC-D354/D355) ............................................................73
SC-D354/D355) .......................................................................74
X2 ( / ) ( SC-D354/D355).......................................................74
PB ZOOM (
(
AV In/Out (AV
Audio dubbing (
SC-D354/D355) .......................................................................74
/
)........................................................................................75
) (
)(
SC-D355) .............................................................76
SC-D354/D355) .................................................77
..................................................................................................................77
.....................................................................................................78
IEEE 1394 . ............................................................79
USB ( SC-D352/D353/D354/D355).......................81
( SC-D353/D354/D355)......................87
Memory Stick ( )....................................................................................87
....................................................................................................87
............................................................................................88
......................................................................89
...........................................................................................................89
.....................................................................................................89
(
:
SC-D354/D355) ..................................................................90
........................................................................90
ENGLISH
Contents
Selecting the Image Quality ..................................................................................91
Select the Image Quality ................................................................................91
Number of Images on the Memory Card .......................................................91
Using Quick Menu: Photo Quality...................................................................92
Memory File Number ............................................................................................93
Taking Photos........................................................................................................94
Viewing Still Images ..............................................................................................95
To view a Single Image...................................................................................95
To view a Slide Show......................................................................................95
To view the Multi Display ................................................................................96
Protection from accidental Erasure.......................................................................97
Using Quick Menu: Protect .............................................................................98
Deleting Still Images and Moving Images ............................................................99
Using Quick Menu: Delete ............................................................................100
Formatting the Memory Card..............................................................................101
MPEG Recording ................................................................................................102
Saving Moving Pictures Files onto a Memory Card ....................................102
MPEG Playback ..................................................................................................103
Using Quick Menu: M.Play Select ................................................................104
Recording an Image from a Cassette as a Still Image ......................................105
Copying Still Images from a Cassette to Memory Card.....................................106
Copy to (Copies Files from the Memory Card to the Built-in Memory)
(SC-D354/D355 only)..........................................................................................107
Marking Images for Printing................................................................................108
Using Quick Menu: Print Mark......................................................................109
PictBridge TM (SC-D353/D354/355 only) ............................. 110
Maintenance ......................................................................... 112
After Finishing a Recording.................................................................................112
Cleaning and Maintaining the Camcorder ..........................................................113
Using Your Camcorder Abroad ...........................................................................114
Troubleshooting .................................................................... 115
Specifications ........................................................................ 118
Index...................................................................................... 119
.........................................................................................................91
....................................................................................................91
............................................................................................91
: ...............................................................................92
.....................................................................................................93
................................................................................................................94
................................................................................................................95
............................................................................................95
............................................................................................95
............................................................................................96
/
.........................................................................................................97
: ...........................................................................................98
........................................................................................................99
: .........................................................................................100
.......................................................................................................101
MPEG
MPEG
............................................................................................102
...........................................................................102
............................................................................................103
: M.Play Select ( )............................................104
..................................................................105
..................................................................106
Copy To ( ) ( SC-D354D/355)............................107
..............................................................................................................108
: ..................................................................................109
PictBridge TM ( SC-D353/D354/D355).........................110
.....................................................................................112
..........................................................................................................112
...................................................................................................113
............................................................................................114
.............................................................................115
.............................................................................118
.....................................................................................119
ENGLISH
Notes and Safety Instructions
Notes regarding the Rotation of the LCD Screen
Please rotate the LCD screen carefully as illustrated.
Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the
Camcorder.
1
1. LCD screen closed.
2. Standard recording using the LCD screen.
■ Open the LCD screen with your finger.
2
3. Recording when looking at the
LCD screen from the top.
3
4. Recording when looking at the
LCD screen from the front.
4
5. Recording when looking at the
LCD screen from the left.
5
6. Recording with the LCD screen closed.
6
,
1.
2.
■
LCD open knob
3.
4.
5.
6.
.
ENGLISH
Notes and Safety Instructions
Notices regarding Copyright
Television programs, video tapes, DVD titles, films, and other program materials may be copyrighted.
Unauthorized copying of copyrighted material may be against the law.
All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung product are trademarks or registered trademarks of their respective holders.
Notes regarding Moisture Condensation
1. A sudden rise in atmospheric temperature may cause condensation to form inside the Camcorder.
1.
for example:
■ When you move the Camcorder from a cold location to a warm location (e.g. from outside to inside during the winter.)
■ When you move the Camcorder from a cool location to a hot location (e.g. from inside to outside during the summer.)
2. If the (DEW) protection feature is activated, leave the
Camcorder for at least two hours in a dry, warm room with the cassette compartment opened and the Battery pack removed.
2.
■
■
Notes regarding Camcorder
1. Do not leave the Camcorder exposed to high temperatures (above
60°C or 140°F).
For example, in a parked car in the sun or exposed to direct sunlight.
2. Do not let the Camcorder get wet.
Keep the Camcorder away from rain, sea water, and any other form of moisture. If the Camcorder gets wet, it may get damaged.
Sometimes a malfunction due to exposure to liquids cannot be repaired.
1.
2.
:
DVD
)
)
(DEW )
,
,
,
(
(
(60°C 140°F )
, ,
ENGLISH
Notes and Safety Instructions
■
■
■
■
■
■
■
Notes regarding the Battery Pack
It is recommended to use original battery pack that is available at
SAMSUNG service center.
Make sure that the Battery pack is fully charged before starting to record.
To preserve battery power, keep your Camcorder turned off when you are not operating it.
If your Camcorder is in CAMERA mode, and it is left in STBY mode without being operated for more than 5 minutes with a tape inserted, it will automatically turn itself off to protect against unnecessary battery discharge.
Make sure that the Battery pack is fitted firmly into place.
Do not drop the Battery pack. Dropping the Battery pack may damage it.
A brand new Battery pack is not charged.
Before using the Battery pack, you need to charge it completely.
Fully discharging a Lithium-Ion battery damages the internal cells.
The Battery pack may be prone to leakage when fully discharged.
When the battery reaches the end of its life, please contact your local dealer. The batteries have to be dealt with as chemical waste.
■
■
■
■
■
■
■
■
■
Notes regarding the Video Head Cleaning
To ensure normal recording and a clear picture, clean the video heads regularly.
If a square block-shape distorts playback, or only a blue screen is displayed, the video heads may be dirty.
If this happens, clean the video heads with a dry type cleaning cassette.
Do not use a wet-type cleaning cassette. It may damage the video heads.
■
■
5
,
,
,
CAMERA
,
,
,
STBY( )
, ,
ENGLISH
Notes and Safety Instructions
Note regarding the Lens
Do not film with the camera lens pointing directly at the sun.
Direct sunlight can damage the CCD(Charge Coupled Device).
Notes regarding electronic Viewfinder
1. Do not position the Camcorder such that the Viewfinder is pointing towards the sun.
Direct sunlight can damage the inside of the Viewfinder. Be careful when placing the Camcorder under sunlight or near a window exposed to sunlight.
2. Do not pick up the Camcorder by holding the Viewfinder.
3. Applying excessive force to the Viewfinder may damage it.
Notes regarding ‘Record’ or ‘Playback’ Using the LCD Screen
1. The LCD screen has been manufactured using high precision technology. However, there may be tiny dots (red, blue or green in color) that appear on the LCD screen.
These dots are normal and do not affect the recorded picture in any way.
2. When you use the LCD screen under direct sunlight or outdoors, it maybe difficult to see the picture clearly.
If this occurs, we recommend using the Viewfinder.
3. Direct sunlight can damage the LCD screen.
1.
2.
3.
3.
■
■
Notes regarding the Hand Strap
To ensure a steady picture while filming, check that the hand strap is properly adjusted.
Do not force your hand into the hand strap as you could damage it.
,
■
■
CCD( )
,
,
,
"RECORD"
1.
"PLAYBACK"
(
,
,
,
)
,
2.
,
,
ENGLISH
Notes and Safety Instructions
Precaution regarding the Lithium Battery
1. The Lithium battery maintains the clock function and user settings; even if the Battery pack or AC adapter is removed.
2. The Lithium battery for the Camcorder lasts about 6 months under normal operation from time of installation.
3. When the Lithium battery becomes weak or dead, the date/time indicator will display 12:00 AM JAN.1,2005 when you set the
Date/Time to on.
When this occurs, replace the Lithium battery with a new one
(type CR2025).
4. There is a danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Warning: Keep the Lithium battery out of reach of children.
Should a battery be swallowed, consult a doctor immediately.
Servicing
Do not attempt to service this Camcorder yourself.
Opening or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
1.
2.
3.
/ ,
"12:00 AM JAN.1,2005" ,
4.
: ,
Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer and having the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
,
, ,
,
,
(CR2025)
ENGLISH
Getting to Know Your Camcorder
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Features
Multi OSD Language
You can select the desired OSD language from OSD List.
Digital Data Transfer Function with IEEE1394
By incorporating the IEEE 1394 (i.LINK™: i.LINK is a serial data transfer protocol and interconnectivity system, used to transmit DV data) high speed data transport port, both moving and still images can be transferred to a PC, making it possible to produce or edit various images.
USB Interface for Digital Image Data Transfer (SC-D352/D353/D354/D355 only)
You can transfer images to a PC using the USB interface without an add-on card.
PHOTO
The photo function lets you capture an object as a still along with sound, while in camera mode.
900x Digital Zoom
Allows you to magnify an image up to 900 times its original size.
Color TFT LCD
A high-resolution color TFT LCD gives you clean, sharp images as well as the ability to review your recordings immediately.
Digital Image Stabilizer (DIS)
The DIS compensates for any handshake, reducing unstable images particularly at high magnification.
Various Digital Effects
The digital effects allows you to give your films a special look by adding various special effects.
Back Light Compensation (BLC)
The BLC function compensates for the bright background behind a subject you're recording.
Program AE
The program AE enables you to alter the shutter speed and aperture to suit the type of scene/action to be filmed.
NITE PIX (SC-D352/D354/D355 only)
The NITE PIX function enables you to record a subject in a dark place.
Digital Still Camera Function (SC-D353/D354/D355 only)
Using Memory card, you can easily record and playback standard still images.
You can transfer standard still images on the Memory card to your PC using the USB interface.
MPEG Recording (SC-D353/D354/D355 only)
MPEG recording makes it possible to record video onto a Memory card.
Multi Memory Card Slot (SC-D355 only)
Multi Memory card slot is able to use Memory Stick, Memory Stick PRO, MMC and SD.
Built-in Memory (SC-D354/D355 only)
You can use digital still camera functions without a separate external Memory card, using the built-in memory installed in your Camcorder.
(SC-D354: 32MB/SC-D355: 64MB)
■
■ IEEE1394
IEEE1394(i.LINK
TM :Ilink
DV ( ),
■
USB
■
,
■ 900
■ Color TFT LCD (
USB
TFT )
(
(SC-D354:32MB; SC-D355:64MB)
SC-D352/D353/D354/D355)
,
900
■ DIS
DIS
■
DSE(Digital Special Effects
,
)
■ BLC
,
■
■
Program AE
Program AE
NITE PIX (
,
SC-D352/D354/D355)
■
■
■
■
-
-
MPEG
( SC-D353/D354/D355)
MEMORY STICK
USB
(
MPEG
SC-D353/D354/D355)
( SC-D355)
MMC,SD,Memory Stick,Memory Stick Pro
( SC-D354/D355)
BLC
,
,
,
ENGLISH
Getting to Know Your Camcorder
Accessories Supplied with Camcorder
Make sure that the following basic accessories are supplied with your digital video camera.
Basic Accessories
1. Lithium Ion Battery Pack
2. AC Power Adapter
(AA-E8 TYPE)
3. AC Cord
4. Audio/Video Cable
5. Instruction Book
6. Lithium Battery for
Remote Control
(SC-D354/D355 only) or
Clock. (TYPE: CR2025)
7. Remote Control
(SC-D354/D355 only)
8. USB Cable
(SC-D352/D353/D354/D355 only)
9. Software CD
(SC-D352/D353/D354/D355 only)
10. Lens Cover
11. Lens Cover Strap
1. Lithium Ion Battery Pack
4. Audio/Video Cable
7. Remote Control
10. Lens Cover
2. AC Power Adapter
(AA-E8 TYPE)
5. Instruction Book
8. USB Cable
11. Lens Cover Strap
3. AC Cord
6. Lithium Battery
(CR2025)
9.Software CD
Optional Accessories
12. S-Video Cable
13. Memory Stick
(SC-D353/D354/D355 only)
12. S-Video Cable 13. Memory Stick
1.
2.
3.
4. AUDIO/VIDEO
( / )
5.
6.
(AA-E8 )
( SC-D354/D355)
( :CR2025)
7.
9.
( SC-D354/D355)
8. USB ( SC-D352/
D353/D354/D355)
CD( SC-D352/
D353/D354/D355)
10.
11.
.
.
12. S
13.
( SC-D353/354/D355)
ENGLISH
Getting to Know Your Camcorder
Front & Left View
1. Lens
2. LED light
(SC-D352/D354/D355 only)
3. Remote sensor
(SC-D354/D355 only)
4. S-Video jack
5. Internal MIC
1. Lens
2. LED light (see page 48) (SC-D352/D354/D355 only)
3. Remote sensor (SC-D354/D355 only)
4. S-Video jack
5. Internal MIC
6. EASY.Q button (see page 40)
7. Function buttons
PLAYER CAMERA M.Player (SC-D353/D354/D355 only)
-
: REW
EASY.Q
REC SEARCH – REV
-
: FF REC SEARCH + FWD
: PLAY/STILL FADE S.SHOW (SLIDE SHOW)
: STOP BLC MULTI DISP.
8. TFT LCD screen
9. IR (Infrared) light (SC-D352/D354/D355 only)
6. EASY.Q button
7. Function buttons
8. TFT LCD screen
9. IR (Infrared) light
(SC-D352/D354/D355 only)
1.
2. LED
.
3.
4. S
5.
6. EASY Q (
7.
.
.
( 48 ) (
. (
SC-D352/D354/D355)
SC-D354/D355)
) ( 40 ).
8.
9.
M.Player
:
:
EASY.Q
(REW) REC SEARCH – REV
(FF) REC SEARCH + FWD
FADE S.SHOW
: /
(PLAY/STILL)
: (STOP) BLC(
.
(
(
SC-D352/D354/D355)
-
SC-D353/D354/D355)
ENGLISH
Getting to Know Your Camcorder
Left Side View
1. DISPLAY
2. MACRO/PB ZOOM
3. Speaker
4. Mode switch
(SC-D353/D354/D355 only)
1. DISPLAY (see page 25)
2. MACRO/PB ZOOM (see page 44/see page 75)
3. Speaker
4. Mode switch (MEMORY CARD/TAPE)
(SC-D353/D354/D355 only)
5. Focus adjustment knob
6. Viewfinder
7. COLOR NITE SHUTTER (see page 47)
(SC-D351/D353 only)
7. COLOR NITE/LED LIGHT (see page 48)
(SC-D352/D354/D355 only)
5. Focus adjustment knob
6. Viewfinder
7. COLOR NITE
SHUTTER
(SC-D351/D353 only)
7. COLOR NITE/
LED LIGHT
(SC-D352/D354/
D355 only)
5.
6.
7.
7.
3.
4.
1.
( 25 )
2. MACRO /PB ZOOM
(
(MEMORYCARD
SC-D353/D354/D355)
47
( 48 ) (
( 44 /75 )
/ TAPE
SC-D351/D353
)
SC-D352/D354/D355)
ENGLISH
Getting to Know Your Camcorder
Right & Top View
1. NITE PIX switch
(SC-D352/D354/D355 only)
2. Menu selector (VOL/MF)
3. MENU button
4. Start/Stop button
5. Power switch
6. DC jack
1. NITE PIX switch (SC-D352/D354/D355 only)
2. Menu selector (VOL/MF)
3. MENU button
4. Start/Stop button
5. Power switch (CAMERA or PLAYER)
6. DC jack
7. TAPE EJECT
8. Zoom lever
9. PHOTO button (see page 68)
10. Jacks
11. Hand strap hook
12. Jack cover
13. Cassette door
DV
USB
AV
MIC
7. TAPE EJECT
8. Zoom lever
9. PHOTO button
10. Jacks
11. Hand strap hook
12. Jack cover
13. Cassette door
DV
IEEE1394
USB
AV
USB
(SC-D352/D353
D354/ D355 only)
AV
MIC
External
MIC
1.
2.
(
(
3.
4. START/STOP (
/
SC-D352/D354/D355)
(CAMERA
/ )
)
PLAYER 5.
6. DV
7.
8.
9. PHOTO
10.
11.
( 68 )
12.
13.
)
ENGLISH
Getting to Know Your Camcorder
Rear & Bottom View
3. Memory card slot
(SC-D353/D354/D355 only) 4. Battery release
1. Lithium battery cover
2. Charging indicator
1. Lithium battery cover
2. Charging indicator
3. Memory card slot (SC-D353/D354/D355 only)
4. Battery release
5. Tripod receptacle
Memory Card Slot (Usable Memory Card)
SC-D353/D354 only SC-D355 only
Memory Stick
Memory Stick PRO
Memory Stick
Memory Stick PRO
SD/MMC
1.
2.
3.
4.
5.
5. Tripod receptacle
( SC-D353/D354/D355)
SC-D353/D354
Memory Stick
Memory Stick PRO
SC-D355
Memory Stick
Memory Stick PRO
SD/MMC
ENGLISH
Getting to Know Your Camcorder
Remote Control (SC-D354/D355 only)
1. PHOTO
2. START/STOP
3. SELF TIMER
4. ZERO MEMORY
5. PHOTO SEARCH
6. A.DUB
7.
(FF)
8.
9.
(REW)
(PLAY)
10. Direction
SC-D354/D355
18. DISPLAY
17. Zoom
16. X2
15. DATE/TIME
14.
(SLOW)
13.
(STILL)
12.
(STOP)
11. F. ADV
1. PHOTO (see page 68)
2. START/STOP
3. SELF TIMER (see page 43)
4. ZERO MEMORY
(see page 42)
5. PHOTO SEARCH
6. A.DUB (see page 77)
7.
(FF)
8.
(REW)
9.
(PLAY)
10. Direction ( / )
(see page 73)
11. F. ADV (see page 74)
12.
(STOP)
13.
(STILL)
14.
(SLOW)
15. DATE/TIME
16. X2 (see page 74)
17. Zoom
18. DISPLAY
8.
9.
10.
1. PHOTO ( ) ( 68 )
2. START/STOP ( / )
3. SELF TIMER (
( 43 )
)
4. ZERO MEMORY (
( 42 )
5. PHOTO SEARCH (
6. A.DUB( ) ( 77 )
)
)
7.
(FF) ( )
11. F.ADV ( 74 )
12.
(STOP) (
13.
(STILL) (
14.
15.
16. X2
)
)
SLOW
/
( 74 )
17. ZOOM
18. DISPLAY
(REW) (
(PLAY)
)
( / ) ( 73 )
ENGLISH
Preparation
Adjusting the Hand Strap
It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording.
The Hand strap enables you to:
- Hold the Camcorder in a stable, comfortable position.
- Press the ZOOM and Start/Stop button without having to change the position of your hand.
Hand Strap
1
1. Insert the Hand strap into the
Hand strap hook on the front side of the Camcorder and pull its end through the hook.
2. Insert your hand into the hand strap and adjust its length for your convenience.
3. Close the Hand strap.
When You carry Your
Camcorder
1
1. Pull and open the Hand strap cover to release the Hand strap.
2. Remove it from the ring and adjust its length.
3. Put your hand through the
Hand Strap and close the cover of Hand Strap.
2
Attaching the Lens Cover
1. Hook up the Lens cover with the Lens cover strap as illustrated.
2. Hook up the Lens cover strap to the Hand strap, and adjust it following the steps as described for the Hand strap.
3. Close the Hand strap.
1
-
-
2
3
2
:
,
3
, ZOOM , START/STOP( / )
1.
2.
3.
,
3
1.
2.
3.
1.
2.
3.
,
,
,
,
ENGLISH
Preparation
Lithium Battery Installation
Battery Installation for the Internal Clock
✤
The Lithium battery maintains the clock function and preset contents of the memory; even if the Battery pack or AC Power adapter is removed.
✤ The Lithium battery for the Camcorder lasts about 6 months under normal operation from the time of installation.
✤ When the Lithium battery becomes weak or dead, the date/time indicator will display 12:00 AM JAN.1,2005 when you set the Date/Time to on.
When this occurs, replace the Lithium battery with
CR2025 type.
1. Remove the Lithium-ion battery from the rear of the
Camcorder.
2. Open the Lithium battery cover on the rear of the
Camcorder.
3. Position the Lithium battery in the Lithium battery holder, with the positive ( ) terminal face up.
4. Close the Lithium battery cover.
Battery Installation for the Remote Control
(SC-D354/D355 only)
✤ You need to insert or replace the Lithium battery when:
You purchase the Camcorder.
The remote control doesn’t work.
✤
Position the Lithium battery in the Lithium battery holder, with the positive ( ) terminal face up.
✤
Be careful not to reverse the polarity of the battery.
[ Note ]
The Lithium battery must be inserted in the correct direction.
Warning: Keep the Lithium battery out of the reach of the children.
Should any battery be swallowed, consult a doctor immediately.
✤
✤
✤
,
,
"12:00 AM JAN.1,2005" ,
1.
2.
3.
4.
✤
✤
✤
-
-
(
,
,
/
CR2025
6
SC-D354/D355)
:
,
AC
ENGLISH
Preparation
Connecting a Power Source
There are two types of power source that can be connected to your
Camcorder.
- The AC Power adapter and AC Cord: used for indoor recording.
- The Battery pack: used for outdoor recording.
To use the AC Power Adapter and DC Cable
1. Connect the AC Power adapter to the
AC Cord.
2. Connect the AC Cord to a wall socket.
[ Notes ]
■ You must use an AA-E8 TYPE AC
Power adapter.
■ The plug and wall socket type may differ according to your resident country.
Power Switch
3. Connect the DC cable to the DC jack socket of the Camcorder.
4. Set the Camcorder to each mode by holding down the tab on the Power switch and turning it to the CAMERA or
PLAYER mode.
<CAMERA mode>
To Select the Camcorder Mode (SC-D353/D354/D355 only)
✤ If you want to use this unit as a Camcorder, set the
Mode switch to TAPE .
✤ If you want to use this unit as a DSC (Digital Still
Camera), Set the Mode switch to MEMORY CARD.
1.
2.
■
■ ,
3.
4.
CAMERA
,
PLAYER
<PLAYER mode>
(
✤
✤
CARD
SC-D353/D354/D355)
,
TAPE
MEMORY
ENGLISH
Preparation
Using the Lithium Ion Battery Pack
✤ The amount of continuous recording time available depends on
The type and capacity of the Battery pack you are using.
How often the zoom function is used.
It is recommended that you have several batteries available.
Charging the Lithium Ion Battery Pack
1. Attach the Battery pack to the Camcorder.
2. Connect the AC Power adapter to an AC Cord and connect the AC Cord to a wall socket.
3. Connect the DC cable to the DC jack socket on the
Camcorder.
4. Turn the Power switch to Off , and the charging indicator will start to flash, showing that the battery is charging.
Blinking time
Once per second
Twice per second
Three times per second
Blinking stops and stays on
On for a second and off for a second
Power Switch
Charging rate
Less than 50%
50% ~ 75%
75% ~ 90%
90% ~ 100%
Error - Reset the Battery pack and the DC cable
✤
-
ZOOM(
5. When the battery is fully charged, disconnect the Battery pack and the AC Power adapter from the Camcorder.
Even with the Power switched Off , the Battery pack will still discharge.
4
[ Notes ]
■
■
The Battery pack may be charged a little at the time of purchase.
To prevent reduction in the life and capacity of the Battery pack, always remove it from the Camcorder after it is fully charged.
■ The amount of continuous recording time available depends on:
The type and capacity of the Battery pack you are using.
■
How often the zoom is used.
Type of use (Camcorder/Camera/With LCD screen etc.).
Ambient temperature.
It is recommended to have additional battery packs available.
< Charging indicator>
Even when the Power switched Off, the Battery pack will still discharge if it is left attached to the device.
■
■
1 1
1 2
1 3
,
1 , 1 (
5.
■
■
ZOOM(
1
1.
2.
3.
4.
,
,
,
,
)
,
50%
50%~75%
75%~90%
90%~100%
-
,
,
,
,
,
,
ENGLISH
Preparation
Table of continuous Recording Time based on Model and Battery
Type.
✤
If you close the LCD screen, it switches off and the Viewfinder switches on automatically.
✤ The continuous recording times given in the table below are approximations.
Actual recording time depends on usage.
Time
Battery
Charging time
Continuous recording time
LCD ON VIEWFINDER ON
SB-LSM80
Approx.
1hr 20min
Approx.
1hr 20min
Approx.
1hr 30min
✤
✤
SB-LSM80
SB-LSM160
SB-LSM160
Approx.
3hr
Approx.
2hr 40min
Approx.
3hr
3
,
1
20
■
■
■
■
■
[ Notes ]
The Battery pack should be recharged in an environment between
32 °F (0 °C)and 104 °F (40 °C).
■ The Battery pack should never be charged in a room with a
■ temperature that is below 32 °F (0 °C).
The life and capacity of the Battery pack will be reduced if it is used in temperatures below 32 °F (0 °C) or left in temperatures above 104 °F (40 °C)for a long period of time, even when it is fully
■ recharged.
Do not put the Battery pack near any heat source (i.e.fire or a heater).
Do not disassemble, apply pressure to or heat the Battery pack.
Do not allow the + and – terminals of the Battery pack to be shortcircuited.
It may cause leakage, heat generation, induce overheating or fire.
Use SB-LSM80 or SB-LSM160 Battery pack only.
It is recommended to use original battery pack that is available at
SAMSUNG service center.
■
■
■
■
■
■
■
■
1 20
2 40
,
,
32°F(0°C) 104°F(40°C)
32°F(0°C)
32°F(0°C)
,
104°F(40°C)
( )
,
+ ,
SB-LSM80 SB-LSM160
,
1 30
3
ENGLISH
Preparation
Battery Level Display
The battery level display indicates the amount of power remaining in the Battery pack.
a. Fully charged b. 20~40% used c. 40~80% used d. 80~95% used e. Completely used (Blinking)
(The Camcorder will turn off soon, change the battery as soon as possible.)
(Blinking)
[ Notes ]
■ Please refer to the Table on page 22 for approximate continuous recording time.
■ The recording time is affected by temperature and environmental
■ conditions.
The recording time shortens dramatically in a cold environment.
The continuous recording times in the operating instructions are measured using a fully charged Battery pack at 77 °F (25 °C).
As the environmental temperature and conditions vary.
The remaining battery time may differ from the approximate continuous recording times given in the instructions.
■
■
■
77 °F(25 °C)
,
,
, a.
b.
c.
d.
e.
(
20~40%
40~80%
80~95%
(
,
)
)
22
,
,
ENGLISH
Preparation
OSD (On Screen Display in Camera/Player Modes) OSD ( )
1. Battery level (see page 23)
2. Digital effects mode (see page 65)
3. EASY.Q (see page 40)
4. DIS (see page 61)
5. Program AE (see page 63)
6. White balance mode (see page 59)
7. Shutter speed (see page 57)
8. Exposure (see page 57)
9. Manual focus (see page 58)
10. Date/Time (see page 33)
11. Zoom position (see page 44)
12. NITE PIX (see page 49)
(SC-D352/D354/D355 only)
13. Color Nite (see page 47)
14. USB (SC-D352/D353/D354/D355 only)
15. Remote (see page 28) (SC-D354/D355 only)
OSD in Camera Mode
1
2
3
4
5
6
7
8
9
10
11
7
8
Art
27
S. 1/50
[29]
26 25 24
STBY
10Sec
12:00 AM JAN.1,2005
W
S. 1/60 †
[29] †
23 22
SP
No Tape !
Nite Pix
T
…
…
0:00:11
14min
16BIt
Color N.1/25
21
20
19
18
17
16
15
14
13
12
1.
2.
3. EASY Q (
4. DIS (
( 23 )
( 65 )
)
) ( 61 )
( 40 )
5. PROGRAM AE
6. White Balance (
7.
( 57 )
)
( 63 )
( 59 )
8.
9.
( 57 )
( 58 )
10. DATE/TIME (
11.
12.
( 44 )
( 49 )
/ ) ( 33 )
(
13.
14. USB (
SC-D352/D354/D355)
( 47 )
SC-D352/D353/D354/D355)
15. REMOTE (
(
) ( 28 )
SC-D354/D355) 16. Wind cut (see page 56)
17. BLC (Back Light Compensation)
(see page 46)
18. LED LIGHT (SC-D352/D354/D355 only)
(see page 48)
19. Audio recording mode (see page 55)
20. Remaining tape (measured in minutes)
21. Tape counter
22. Zero memory (SC-D354/D355 only)
(see page 42)
23. Record speed mode
24. Operating mode
25. Self timer (SC-D354/D355 only)
26. Photo image
27. Tele MACRO (see page 44)
28. Audio playback
29. Volume control (see page 70)
30. DV IN (DV data transfer mode) (see page 80)
31. AV IN (SC-D355 only)
OSD in Player Mode
32. Audio dubbing (SC-D354/D355 only) (see page 77)
33. DEW (see page 7)
34. Warning indicator (see page 115)
35. Message line (see page 115)
28
33
34
35
29
32
Sound[2]
√ SP 0:00:00:10
14min
16. WIND CUT ( ) ( 56 )
17. BLC (Back Light Compensation
( 46 )
18. LED LIGHT (LED ) ( 48 )
( SC-D352/D354/D355)
[10]
†
No Tape !
12:00 AM JAN.1,2005
…
16BIt
AV In 31
33. DEW (
34.
) ( 7 )
( 115 )
35. Message Line (
19.
( 55 )
20. Remaining Tape (
21. Tape Counter (
22.
(
( 42 )
SC-D354/D355)
30 23.
24.
25.
26. PHOTO (
(
27.
28.
( 44 )
29.
30. DV IN (DV
31. AV
32.
(
(
( 70 )
) ( 80 )
SC-D355)
SC-D354/D355) ( 77 )
) ( 115 )
)
) (
SC-D354/D355)
)
)
)
ENGLISH
Preparation
OSD (On Screen Display in M.Cam/M.Player Modes)
(SC-D353/D354/D355 only)
1. Photo quality
2. CARD (Memory Card) indicator
3. Image counter
Total number of recordable still images.
4. Image recording and loading indicator
5. Erase protection indicator (see page 97)
6. Print mark (see page 108)
7. Folder number-file number (see page 89)
8. JPEG image size
9. Slide show
(
OSD ( M.Cam/M.Player
OSD in M.Cam Mode
1
[29]
4
No Memory Card !
Nite Pix
12:00 AM JAN.1,2005
SC-D353/D354/D355)
3
46
3 min
2
1.
2.
3.
4.
5.
6.
7.
8. JPEG
9.
W T
Turning the OSD
(On Screen Display) On/Off
[29] † …
OSD in M.Player Mode ■
/
-
(
( 97 )
-
( 108 )
( 89 )
OSD ( )
■
DISPLAY(
■
Turning OSD on/off
Press the DISPLAY button on the left side control panel.
Each press of the button toggles the OSD function on and off.
When you turn the OSD off,
In CAMERA Mode : The STBY, REC modes are always displayed on the OSD, even when the OSD is turned off and the key input is displayed for 3 seconds then turned off.
In PLAYER Mode : When you press any
5
6
001 function button, the function is displayed on the OSD for
3 seconds before it turns off.
9
Slide
No Memory Card !
12:00 AM JAN.1,2005
■
2/46
800x600
100-0002
( 33 )
Turning the Date/Time on/off
To turn the Date/Time on or off, access the menu and change the
Date/Time mode.(see page 33)
8
7
-
DATE/TIME (
/
CAMERA
STBY( ),REC(
3
/
,
,
PLAYER
)
:
:
),
DATE/TIME
)
3
ENGLISH
System Menu Setting
Selecting the OSD Language
✤ The Language function works in Camera/Player/M.Cam/M.Player
modes.
✤
Select the appropriate OSD language among from OSD List.
✤
✤
Camera,Player,M.Cam,M.Player
1. Set the Power switch to CAMERA or PLAYER .
2. Set the Mode switch to TAPE or MEMORY CARD .
(SC-D353/D354/355 only)
1
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select System , then press the Menu selector .
4
5. Move the Menu selector to the left or right to select Language , then press the Menu selector .
■ The available language options are listed.
6. Move the Menu selector to the left or right to select desired OSD language, then press the
Menu selector .
■ The OSD language is refreshed in selected language.
Camera Mode
√ System
Clock Set
Beep Sound
Language
Demonstration
√ On
√ English
√ On
Move Select MENU Exit
7.
7. To exit, press the MENU button.
1.
2.
Mode
CARD(
3.
■
4.
MENU
CAMERA PLAYER
) (
TAPE( ) MEMORY
SC-D353/D354/D355)
System ,
5.
Language ,
■
6.
■
[ Note ]
The word “Language” in the menu is always indicated in English.
[ ]
"Language"
ENGLISH
System Menu Setting
Setting the Clock
✤ Clock setup works in Camera/Player/M.Cam/M.Player modes.
✤ The Date/Time is automatically recorded onto a tape.
Before recording, please set the Date/Time.
1. Set the Power switch to CAMERA or PLAYER .
2. Set the Mode switch to TAPE or MEMORY
CARD . (SC-D353/D354/D355 only)
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select System , then press the Menu selector .
4
5. Move the Menu selector to the left or right to select Clock Set , then press the Menu selector .
■ The year will highlight first.
6. Move the Menu selector to the left or right to set current Year, then press the Menu selector .
■ The month will be highlighted.
7. You can set the month, day, hour and minute following the same procedure for setting the year.
8. Press the Menu selector after setting the minutes.
■
■
The message Complete!
will be displayed.
To adjust the clock, select the Year, Month,
5
Day, Hour or Min by pressing the Menu selector , then move the Menu selector to the left or right to set respective values.
9. To exit, press the MENU button.
8
Move
Camera Mode
Back
Clock Set
Beep Sound
Language
Demonstration
…
JAN 1 2005
†
12 : 00 AM
Adjust
✤ Camera
✤ Date/Time(
/
/
Camera Mode
√ System
Clock Set
Beep Sound
Language
Demonstration
√ On
√ English
√ On
Select MENU Exit
Select MENU Exit
)
Player ,M.Cam,M.Player
.
1.
2.
Mode
5.
CAMERA
TAPE(
CARD(
3.
MENU(
■
4.
)
)
(
Menu selector (
System
SC-D353/D354/D355)
)
Menu selector(
Menu selector(
)
PLAYER
) MEMORY
Menu selector
)
)
Clock Set(
(
■
)
6.
Menu selector(
Menu selector(
)
)
7.
■
,
,
Camera Mode
Back
Clock Set
Beep Sound
Language
Demonstration
JAN 1 2005
12 : 00 AM
Complete!
8.
9.
■
■
(
,
,
, Menu selector(
Complete!( !)
Menu selector
)
MENU(
, , ,
)
)
Move
■
■
[ Notes ]
■ After the Lithium battery loses its charge (after about 6 months), the date/time appears on the screen as 12:00 AM JAN.1,2005.
You can set the year up to 2037.
If the Lithium battery is not installed, any input data will not be backed up.
Select MENU Exit
■
■
■
12:00 AM JAN.1,2005
2037
,
, /
ENGLISH
System Menu Setting
Setting the Wireless Remote Control Acceptance (Remote)
(SC-D354/D355 only)
✤ The Remote function works in Camera/Player/M.Cam/M.Player
modes.
✤
The Remote option allows you to enable or disable the remote control for use with the Camcorder.
✤
✤
1. Set the Power switch to CAMERA or PLAYER .
2. Set the Mode switch to TAPE or MEMORY CARD .
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select System , then press the Menu selector .
4
5. Move the Menu selector to the left or right to select Remote , then press the Menu selector .
6. Move the Menu selector to the left or right to select On or Off , then press the Menu selector .
7. To exit, press the MENU button.
6
1
Camera Mode
√ System
Clock Set
Remote
Beep Sound
Language
Demonstration
√ On
√ On
√ English
√ On
Move Select MENU Exit
[ Note ]
If you set the Remote to Off in the menu and try to use it, the remote control icon( ) will blink for 3 seconds on the LCD screen and then disappear.
Camera Mode
Back
Clock Set
Remote
Beep Sound
Language
Demonstration
O
On
Move Select MENU Exit
Remote (
Camera Player
SC-D354/D355)
,M.Cam,M.Player
1.
CAMERA
2.
Mode
CARD(
3.
MENU(
■
)
)
TAPE(
4.
Menu selector(
System
)
Menu selector(
PLAYER
) MEMORY
)
5.
Remote
6.
(
On
Menu selector(
Menu selector(
Off
Menu selector( )
Menu selector
)
)
)
7.
, MENU( )
, ( )
Off( )
3 ,
ENGLISH
System Menu Setting
Setting the Beep Sound
✤ The Beep Sound function works in Camera/Player/M.Cam/M.Player
modes.
✤
You can turn the Beep Sound on or off, when on, each press of a button sounds a beep.
Beep Sound ( )
✤
✤
Camera
Beep Sound(
Player
)
Beep Sound(
,M.Cam,M.Player
) .
,
1. Set the Power switch to CAMERA or PLAYER .
2. Set the Mode switch to TAPE or MEMORY CARD .
(SC-D353/D354/D355 only)
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select System , then press the Menu selector .
4
5. Move the Menu selector to the left or right to select Beep Sound , then press the Menu selector .
6. Move the Menu selector to the left or right to select On or Off , then press the Menu selector .
6
7. To exit, press the MENU button.
1
Camera Mode
√ System
Clock Set
Beep Sound
Language
Demonstration
√ On
√ English
√ On
Move Select MENU Exit
Camera Mode
Back
Clock Set
Beep Sound
Language
Demonstration
Off
On
1.
2.
Mode
CARD( )
CAMERA PLAYER
TAPE(
(
) MEMORY
SC-D353/D354/D355)
3.
MENU(
■
)
4.
Menu selector(
System
)
Menu selector( )
5.
(
Beep Sound
)
Menu selector(
Menu selector
)
6.
(
On
7.
,
Off
)
Menu selector(
,
)
Menu selector
MENU( )
Move Select MENU Exit
ENGLISH
System Menu Setting
Setting the Shutter Sound (SC-D353/D354/D355 only)
✤ The Shutter Sound function works in both Player and M.Cam
modes.
✤
You can turn the Shutter Sound on or off, when on, with each press of the PHOTO button the Shutter will Sound.
✤
✤
Shutter Sound (
Player ,M.Cam
) ( SC-D353/D354/D355)
,
, PHOTO
1. Set the Power switch to CAMERA or PLAYER .
2. If the Power switch is set to CAMERA mode, set the Mode switch to MEMORY CARD .
If the Power switch is set to PLAYER mode, set the Mode switch to TAPE .
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select System , then press the Menu selector .
4
5. Move the Menu selector to the left or right to select Shutter Sound , then press the Menu selector .
6. Move the Menu selector to the left or right to select On or Off , then press the Menu selector .
6
7. To exit, press the MENU button.
1
Player Mode
√ System
Clock Set
Beep Sound
Shutter Sound
USB Version
Language
√ On
√ On
√ USB 2.0
√ English
Move Select MENU Exit
Player Mode
Back
Clock Set
Beep Sound
Shutter Sound
USB Version
Language
Off
On
Move Select MENU Exit
1.
CAMERA PLAYER
2.
MEMORY CARD(
CAMERA , Mode
)
, Mode
TAPE( )
PLAYER
3.
MENU(
■
)
4.
Menu selector(
System
)
Menu selector( )
5.
(
Menu selector(
Shutter Sound
)
Menu selector
)
6.
(
On
7.
,
Off
)
Menu selector(
,
)
Menu selector
MENU( )
ENGLISH
System Menu Setting
Viewing the Demonstration
✤ Before you begin: Make Sure that there is no tape inserted in the
Camcorder. (see page 36)
✤
Demonstration automatically shows you the major functions that are included with your Camcorder so that you may use them more easily.
✤ The Demonstration function may only be used in the
Camera mode without a tape inserted in the
1
Camcorder.
✤
The Demonstration operates repeatedly until the
Demonstration mode switched Off.
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select System , then press the Menu selector .
5. Move the Menu selector to the left or right to select Demonstration , then press the Menu selector .
6. Move the Menu selector to the left or right to
4 select On , then press the Menu selector .
7. Press the MENU button.
■ The Demonstration will begin.
8. To quit the Demonstration, press the MENU button.
6
[ Notes ]
■ The Demonstration mode is automatically activated when the Camcorder is left idle for more than 10
■ minutes after switching to the Camera mode (no tape is inserted in the Camcorder).
If you press other buttons (FADE, BLC, PHOTO,
EASY.Q) during the Demonstration mode, the
■ demonstration stops temporarily and resumes 10 minutes later if you do not operate any other functions.
While setting the NITE PIX to ON, the Demonstration function does not work. (SC-D352/D354/D355 only)
Move
Camera Mode
Back
Clock Set
Beep Sound
Language
Demonstration
Move
✤
✤
Select MENU Exit
Samsung Camcorder is...
[Digital Camcorder]
Demonstration
Off
On
Demonstration (
Camera Mode
√ System
Clock Set
Beep Sound
Language
Demonstration
√ On
√ English
√ On
Select MENU Exit
,
✤
Demonstration(
,
✤
( )
)
Off(
1.
CAMERA
2.
Mode TAPE(
( SC-D353/D354/D355)
3.
MENU( )
■
4.
Menu selector(
5.
)
(
)
System
Demonstration
Menu selector(
Menu selector( )
Menu selector
)
6.
On ,
Menu selector(
Menu selector(
)
)
)
7.
MENU(
■
8.
)
Demonstration(
( )
■
■
■
)
,
( 36 )
Camera v
Demonstration
)
),
Camera(
10
)
, Demonstration(
MENU
),BLC(
,
),PHOTO(
10
,
NITE PIX
(
,
,
SC-D352/D354/D355)
FADE(
),EASYQ(
)
),
ENGLISH
Display Menu Setting
Adjusting the LCD Screen
✤ This function works in Camera/Player/M.Cam/M.Player modes.
✤
Your Camcorder is equipped with a 2.36 inch color Liquid Crystal
Display(LCD) screen, which enables you to view what you are recording or playing back directly.
✤ Depending on the conditions under which you are using the
Camcorder (indoors or outdoors for example), you can adjust;
LCD Bright
LCD Color
1. Set the Power switch to CAMERA or PLAYER .
1
2. Set the Mode switch to TAPE or MEMORY CARD .
(SC-D353/D354/D355 only)
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Display , then press the Menu selector .
5. Move the Menu selector to the left or right to select the item you want to adjust ( LCD Bright or
LCD Color ), then press the Menu selector .
4
6. Move the Menu selector to the left or right to adjust the value of the selected item ( LCD Bright or LCD
Color ), then press the Menu selector .
■ You can set values for LCD Bright and LCD
Color between 0~35.
6
7. To exit, press the MENU button.
■ LCD Bright & LCD Color functions do not affect the brightness and color of the image to be recorded.
Camera Mode
√ Display
LCD Bright
LCD Color
Date/Time
TV Display
√ Off
√ On
Move
Camera Mode
Back
LCD Bright
LCD Color
Date/Time
TV Display
✤
✤
Camera
✤
LCD Bright (
LCD Color(
2.36
)
)
Player
(
Select MENU Exit
[18]
1.
POWER(
PLAYER(
2.
Mode
CARD(
3.
MENU(
■
4.
Display
6.
■
0~35
Menu selector( )
LCD Bright LCD Color
7.
■
)
)
5.
,
( LCD Bright LCD Color ),
Menu selector( )
,
)
)
,M.Cam,M.Player
,
),
CAMERA( )
TAPE(
(
) MEMORY
SC-D353/D354/D355)
Menu selector(
Menu selector(
MENU
)
)
:
,
Adjust Select MENU Exit
ENGLISH
Display Menu Setting
Displaying the Date/Time Date/Time ( / )
✤ The Date/Time function works in Camera/Player/M.Cam/M.Player
modes.
✤
The date and time are automatically recorded on a special data area of the tape.
1. Set the Power switch to CAMERA or PLAYER .
2. Set the Mode switch to TAPE or MEMORY CARD .
(SC-D353/D354/D355 only)
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select
Display , then press the Menu selector .
5. Move the Menu selector to the left or right to select Date/Time , then press the Menu selector .
6. Move the Menu selector to the left or right to select the display type of the Date/Time, then press the
Menu selector .
■ Display type of the Date/Time: Off, Date, Time,
Date&Time
7. To exit, press the MENU button.
4
1
Camera Mode
√ Display
LCD Bright
LCD Color
Date/Time
TV Display
Move
✤ Camera
✤ Date/Time( /
√ Off
√ On
Select MENU Exit
)
Player
1.
POWER(
PLAYER(
2.
Mode
CARD(
3.
MENU(
■
4.
5.
6.
Display
■
)
)
)
)
,M.Cam,M.Player
CAMERA(
TAPE(
(
) MEMORY
SC-D353/D354/D355)
Menu selector(
Menu selector(
Menu selector(
,
, Menu selector(
-,Off( ),Date(
Date&Time( )
6
Camera Mode
Back
LCD Bright
LCD Color
Date/Time
TV Display
[ Notes ]
■ The Date/Time will read 12:00 AM JAN.1,2005 in the following conditions.
During playback of a blank section of a tape.
■
Move
If the tape was recorded before setting the
Date/Time in the Camcorder.
When the Lithium battery becomes weak or dead.
Before you use the Date/Time function, you must set the clock.
See Setting the Clock on page 27.
Select
■
Off
Date
Time
Date&Time
MENU Exit
7.
■
-
Date/Time(
-
-
, Date/Time(
"12:00 AM JAN.1,2005"
Date/Time(
/
,
)
MENU
,
/
/
)
/
)
),TIME(
)
)
Date/Time
,
)
)
,
)
27
),
ENGLISH
Display Menu Setting
Setting the TV Display
✤ The TV Display function works in Camera/Player/M.Cam/M.Player
modes.
✤
You can select the output path of the OSD (On Screen Display).
Off: The OSD appears in the LCD screen and Viewfinder only.
On: The OSD appears in the LCD screen, Viewfinder and TV.
Use the DISPLAY button located at the left side of the
Camcorder to turn the OSD on/off on the LCD screen
/Viewfinder/TV.
1. Set the Power switch to CAMERA or PLAYER .
2. Set the Mode switch to TAPE or MEMORY CARD .
(SC-D353/D354/D355 only)
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Display , then press the Menu selector .
5. Move the Menu selector to the left or right to select TV Display , then press the Menu selector .
4
6. To activate TV Display function, move the
Menu selector to the left or right to select
On or Off , then press the Menu selector .
7. To exit, press the MENU button.
6
1
Camera Mode
√ Display
LCD Bright
LCD Color
Date/Time
TV Display
√ Off
√ On
Move
TV Display ( )
✤
✤
Camera
OSD(
- OFF( ):
- ON( ):
-
/
Player
)
DISPLAY(
OSD( )
,M.Cam,M.Player
)
,
Select MENU Exit
Camera Mode
Back
LCD Bright
LCD Color
Date/Time
TV Display Off
On
Move Select MENU Exit
/
1.
POWER(
PLAYER( )
)
2.
Mode
CARD( )
CAMERA( )
TAPE(
(
) MEMORY
SC-D353/D354/D355)
3.
MENU(
■
)
4.
Display
5.
Menu selector(
Menu selector(
,
Menu selector(
)
)
)
TV Display
6.
,
Menu selector(
, Menu selector(
)
7.
, MENU
On
)
Off
ENGLISH
Basic Recording
Using the Viewfinder
✤ In the PLAYER mode, the Viewfinder will work when the LCD screen is closed.
✤
In the CAMERA mode, the Viewfinder will work when the LCD screen is closed or rotated counterclockwise 180°.
Adjusting the Focus
The focus adjustment knob of the Viewfinder enables individuals with vision problems to see clearer images.
1. Close the LCD screen and pull out the Viewfinder.
2. Use the focus adjustment knob of the Viewfinder to focus the picture.
Viewfinder (
✤ PLAYER
✤
CAMERA
,
,
)
1.
2.
,
[ Notes ]
■ Viewing the sun or any strong light source through the Viewfinder for a prolonged period may be harmful, or cause temporary
■ impairment.
The Viewfinder will work either in PLAYER mode with LCD screen closed or in CAMERA mode with LCD screen closed or facing the front.
■
■ PLAYER
,
180°,
ENGLISH
Basic Recording
Inserting and Ejecting a Cassette
✤ When inserting a tape or closing the cassette compartment, do not apply excessive force. As it may cause a malfunction.
✤
Do not use any tape other than Mini DV cassettes.
1. Connect a power source and slide the
TAPE EJECT switch.
■ The cassette door opens automatically.
2. Insert a tape into the cassette compartment with the tape window facing outward and the protection tab toward the top. (Inserting a Cassette)
■ Remove the cassette tape, which is automatically ejected by pulling the cassette out. (Ejecting a Cassette)
1
3-1
3. Press the area marked PUSH on the cassette door until it clicks into place.
■ Be careful to keep the hand strap away
■ from the cassette door when closing it.
Closing the cassette door with the hand strap inside may cause a damage to the set.
The cassette is loaded automatically.
√
✤
✤
2
3-2
[ Note ]
When you have recorded something that you wish to keep, you can protect it so that it will not be accidentally erased.
a. Protecting a tape:
Push the safety tab on the cassette so that the hole is uncovered.
b. Removing the tape protection:
If you no longer wish to keep the recording on the cassette, push the safety tab back so that it covers the hole.
How to store a tape a. Avoid places with magnets or magnetic interference.
b. Avoid humidity and dust prone places.
c. Keep the tape in an upright position and avoid storing it in direct sunlight.
d. Avoid dropping or knocking your tapes.
a
SAVE b
REC a.
b.
c.
d.
a.
b.
,
MiniDV
1.
(
■
2.
■
PUSH
3.
■
■
:
:
,
,
,
)
,
,
,
TAPE EJECT
,
,
PUSH( ) ,
.
,
ENGLISH
Basic Recording
Hints for Stable Image Recording
✤ While recording, it is very important to hold the Camcorder correctly.
✤ Fix the lens cover firmly by clipping it to the hand strap.
(see page 18)
Recording with the LCD Screen
1. Hold the Camcorder firmly using the hand strap.
2. Place your right elbow against your side.
3. Place your left hand under or beside the LCD screen to support and adjust it.
Do not touch the built-in microphone.
4. Choose a comfortable, stable position for the shots that you are taking.
You can lean against a wall or on a table for greater stability.
Do not forget to breathe gently.
5. Use the LCD frame as a guide to determine the horizontal plane.
6. Whenever possible, use a tripod.
Recording with the Viewfinder
1. Hold the Camcorder firmly using the hand strap.
2. Place your right elbow against your side.
3. Place your left hand under the Camcorder to support it.
Be sure not to touch the built-in microphone.
4. Choose a comfortable, stable position for the shots that you are taking.
You can lean against a wall or on a table for greater stability.
5. To view an object through the Viewfinder, pull it out until you hear the click sound. Excessive force may cause damage to the Viewfinder.
6. Place your eye firmly against the Viewfinder eyecup.
7. Use the Viewfinder frame as a guide to determine the horizontal plane.
8. Whenever possible, use a tripod.
✤
✤
1.
2.
3.
4.
5.
6.
5.
6.
7.
8.
1.
2.
3.
4.
,
,
,
( 18 )
,
" "
ENGLISH
Basic Recording
Various Recording Techniques
✤ In some situations different recording techniques may be required for more dramatic results.
✤
1. General recording.
2. Downward recording.
Making a recording with a top view of the
LCD screen.
3. Upward recording.
Making a recording viewing the LCD screen from below.
4. Self recording.
Making a recording viewing the LCD screen from the front.
5. Recording with the Viewfinder.
In circumstances where it is difficult to use the LCD screen, the Viewfinder can be used as a convenient alternative.
1
3
5
[ Note ]
Please rotate the LCD screen carefully as excessive rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder.
2
4
,
3.
4.
1.
2.
5.
.
,
ENGLISH
Basic Recording
Making your First Recording
1. Connect a power source to the
Camcorder. (see page 20)
(A Battery pack or a AC Power adapter) Insert a cassette.
(see page 36)
2. Remove the Lens cover.
1
3. Set the Power switch to
CAMERA .
■ Open the LCD screen.
■ Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
■
Make sure that STBY is displayed.
4
√
If the write protection tab of the cassette is open(set to save),
■
■
STOP and Protection !
will be displayed. Release the write protection tab to record.
Make sure the image you want to record appears on the LCD screen or Viewfinder.
Make sure the battery level indicates that there is enough remaining power for your expected recording time.
4. To start recording, press the Start/Stop button.
■ REC
● is displayed on the LCD screen.
To stop recording, press the Start/Stop button again.
■ STBY is displayed on the LCD screen.
√
2
1.
(
( 20 )
)
( 36 )
2.
3
3.
CAMERA
(
■
■
)
TAPE
(
.
SC-D353/D354/D355)
STBY
■
Protection!
,
,
STOP
■
■
4.
■
■ STBY
,
,
Start/Stop(
REC
●
( )
Start/Stop(
)
)
[ Note ]
Detach the Battery pack when you are finished recording to prevent unnecessary battery power consumption.
,
ENGLISH
Basic Recording
Using EASY.Q Mode (for Beginners)
✤ The EASY.Q mode works only in Camera mode.
✤
The EASY.Q mode allows a beginner to easily make good recordings.
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. By pressing the EASY.Q button, all functions on the
Camcorder will be set to off and the recording settings will be set to the following basic modes:
■ Battery level, recording mode, counter, date/time,
■ and DIS ( ) will be displayed.
The word EASY.Q
will appear on the LCD screen at the same time. However, the
Date/Time will only be seen if it has been previously set. (see page 33)
4. Press the Start/Stop button to start recording.
Recording will begin using the basic automatic settings.
5. Press the EASY.Q
button again in the STBY mode and then turn the EASY.Q mode off.
■ The EASY.Q function will not turn off while you are recording.
■ The camcorder will return to the settings that were set prior to activating EASY.Q mode.
1
3
√
EASY. Q ( )
✤
✤ EASY. Q(
Camera
)
STBY SP 0:00:10
60min
( )
EASY. Q(
EASY. Q
)
1.
2.
Mode
(
TAPE(
SC-D353/D354/D355).
3.
EASY. Q(
OFF(
CAMERA(
)
),
,
)
)
:
■
■
/ Date/Time,DIS( )
"EASY.Q"
,
/
,
Date/Time(
,
( 33 ) ,
4.
Start/Stop(
■
)
/
,
)
5.
STBY(
,
■
■
) EASY. Q( )
■
■
[ Notes ]
■ In EASY.Q mode, certain functions are not available, such as Menu, BLC, Manual focus.
■
If you want to use these functions, you must first turn the EASY.Q mode off.
The EASY.Q mode settings are deleted when the Battery pack is removed from the Camcorder and must be reset when the Battery pack is replaced.
EASY.Q mode will not turn off during a recording.
Taking a photo image using the PHOTO button while EASY.Q is
■ set releases DIS function.
Digital Zoom, COLOR NITE SHUTTER or Digital Effect is not available in the EASY.Q mode.
■
■
■
EASY.Q
EASY.Q
■
■
EASY. Q(
,BLC
,
)
,
EASY. Q
,
,
,MF
EASY. Q(
, EASY. Q(
)
,
, MENU
)
PHOTO
ENGLISH
Basic Recording
When a cassette is loaded and the Camcorder is left in the STBY mode for more than 5 minutes without being used, it will switch off automatically.
To use it again, press the Start/Stop button or set the Power switch to Off and then back to CAMERA.
This auto power off feature is designed to save battery power.
CAMERA
■
Record Search (REC SEARCH)
You can view a recording using the
+, function in STBY mode.
REC SEARCH
REC SEARCH enables you to play the recording backwards and REC SEARCH + enables you to play it forwards, for as long as you keep each button pressed down.
■ If you press the REC SEARCH button in STBY mode, your Camcorder will play in reverse for 3 seconds and return to the original position automatically.
[ Note ]
Mosaic shaped distortion may appear on the screen while in Record Search mode.
,
STBY
Start/Stop
5
) ,
Off
,
(REC SEARCH)
■ STBY(
-
REC SEARCH +
REC SEARCH -
)
■
(
,
STBY(
) ,
)
, REC SEARCH + ,
REC SEARCH -
3
REC SEARCH(
ENGLISH
Basic Recording
Setting the Zero Memory (SC-D354/D355 only)
✤ The ZERO MEMORY function works in both Camera and Player modes.
✤ You can mark a point on a tape that you want to return to following playback.
Zero Memory (
✤
✤
Camera(
ZERO MEMORY(
) Player(
)
1.
POWER(
PLAYER( )
)
1. Set the Power switch to CAMERA or PLAYER .
2. Set the Mode switch to TAPE .
3. Press the ZERO MEMORY button on the remote control before the recording or during playback at the point where you wish to return.
■ The time code is changed to a tape counter that is set to ZERO MEMORY with the 0:00:00
1
■
(ZERO MEMORY indicator).
If you want to cancel the ZERO MEMORY function, press the ZERO MEMORY button again.
4. Finding the zero position.
■ When you have finished playback, fast forward or rewind the tape in stop mode.
The tape stops automatically when it reaches the
■ zero position.
When you have finished recording, set the
Power switch to PLAYER and press the
(REW) button. The tape stops automatically when it reaches the zero position.
5. The tape counter with the (ZERO MEMORY indicator) disappears from the display and the tape counter is changed to the time code.
œ
5.
(
2.
Mode
3.
ZERO MEMORY(
■
,
4.
■
)
■
ZERO MEMORY(
■
PLAYER(
)
) (
)
,
) ,
TAPE(
,
,
,
SC-D354/D355)
CAMERA(
)
,
0:00:00 (
,
)
)
(REW)( )
,
)
[ Notes ]
■ In the following situations, ZERO MEMORY mode may be canceled automatically:
At the end of the section marked with the ZERO MEMORY
■ function.
When the tape is ejected.
When you remove the Battery pack or power supply.
The ZERO MEMORY may not function correctly where there is a break between recordings on the tape.
■
■
-
-
-
,
,
:
ENGLISH
Basic Recording
Self Record using the Remote Control (SC-D354/D355 only)
✤ The SELF TIMER function works only in Camera mode.
✤ When you use the Self Timer function on the remote control, the recording begins automatically in 10 seconds.
✤
✤
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE .
3. Press the SELF TIMER button until the appropriate indicator is displayed in the LCD screen.
1
4. Press the Start/Stop button to start the timer.
Self Timer starts counting down from 10 with a beep sound.
In the last one second of the countdown, the beep sound gets faster, then recording starts automatically.
If you want to cancel the Self Timer function before recording, press the SELF TIMER button.
5. Press the Start/Stop button again when you wish to stop recording.
3
4
■
■
[ Notes ]
■ Do not obstruct the remote control sensor by putting obstacles between the remote control and
Camcorder.
The remote control range is 4 ~5m (13 ~17 ft).
The effective remote control angle is up to 30
■ degrees left /right from the center line.
Using a tripod is recommended for delayed recording.
œ
œ
Camera(
(
)
SC-D354/D355)
, 10
SELF TIMER( )
■
■
■
■
1.
2.
Mode
3.
SELF TIMER
CAMERA(
TAPE(
)
)
4.
-
-
-
Start/Stop
,
,
SELF TIMER
,
5.
,
10
Start/Stop
,
,
4~5
.
30
ENGLISH
Basic Recording
Zooming In and Out Zooming In and Out (
✤ The Zoom function works in both Camera and M.Cam modes.
✤
Zooming is a recording technique that lets you change the size of the subject in a scene.
✤
You can zoom using variable zoom speeds.
✤ Use these features for different shots. Please note that over-use of the Zoom feature can lead to unprofessional looking results and a reduction of battery usage time.
1. Move the Zoom lever slightly for a gradual zoom, move it further for a high-speed zoom.
■ Your zooming is monitored on the
OSD.
TELE
✤
✤
✤
✤
1.
2. T(Telephoto) side: Subject appears closer.
3. W(Wide angle) side: Subject appears farther away.
■ You can record a subject that is about
10mm (about 0.5 inch) away from the lens surface in the
Wide position.
W
WIDE
T
Camera(
,
.
) M.Cam
,
■
2. T(Telephoto,
)
3. W(Wide angle
■
, ,
;
) :
) :
Using the Tele Macro
✤ Tele Macro Function works in both Camera and M.Cam mode.
✤
Effective focal distance in tele macro mode is 50Cm
(19.7inches)~100Cm (39.4 inches).
1. Press the MACRO button.
■ Tele Macro Icon ( ) will be displayed.
2. If you want to cancel the Tele Macro function, press the
MACRO button again.
■
■
■
[ Notes ]
■ When recording in Tele Macro mode, the focus speed may be slow.
■ When you operate the Zoom function in the Tele Macro
■ mode, the recording subject may be out of focus.
Use a tripod to prevent hand shake in the Tele Macro mode.
Avoid shadows when recording in the Tele Macro mode.
As the distance to the subject decreases, focusing area narrows.
When you can not get proper focus, use the Zoom lever.
œ
STBY
SP
✤ Camera
✤
0:39:40
25min
M.Cam
1.
■
MACRO
2.
■
■
■
■
■
■
50
( )
,
~100
,
,
,
,
,
MACRO
,
,
10
ENGLISH
Basic Recording
Using the Fade In and Out
✤ The FADE function works only in Camera mode.
✤ You can give your recording a professional look by using special effects such as fade in at the beginning of a sequence or fade out at the end of a sequence.
To Start Recording
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. Before recording, hold down the FADE button.
■ The picture and sound gradually disappear (fade out).
4. Press the Start/Stop button and at the same time release the FADE button.
Recording starts and the picture and sound gradually appear (fade in).
3
4
5
√
To Stop Recording
(use Fade In/Fade Out)
6
√
5. When you wish to stop recording, hold down the FADE button.
■ The picture and sound gradually disappear (fade out).
6. When the picture has disappeared, press the Start/Stop button to stop recording.
Hold down the FADE button a. Fade Out
(Approx. 4 seconds)
Fade In and Out(
✤ Camera
✤
STBY SP 0:00:05
60min
REC ● SP 0:00:20
60min
REC ● SP 0:00:25
60min
STBY SP 0:00:30
60min
,
)
a. Fade Out Gradual disappearance a.
( 4
Fade In and Out(
,
1.
CAMERA(
2.
Mode
(
TAPE(
SC-D353/D354/D355)
3.
■
, FADE(
(
4.
)
(
Start/Stop(
FADE( ) ,
)
(
5.
■
6.
Start/Stop(
/
,
)
)
)
,
)
)
FADE(
( )
)
)
,
,
)
) b. Fade In
(Approx. 4 seconds)
Gradual appearance b. Fade In Release the FADE button b.
( 4 )
ENGLISH
Basic Recording
Using Back Light Compensation Mode (BLC)
✤ BLC works in both Camera and M.Cam
modes.
✤
Back lighting exists when the subject is darker than the background:
The subject is in front of a window.
The person to be recorded is wearing white or shiny clothes and is placed against a bright background; the person’s face is too dark to
<BLC off> distinguish his/her features.
The subject is outdoors and the background is overcast.
The light sources are too bright.
The subject is against a snowy background.
3
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE or
MEMORY CARD . (SC-D353/D354/D355 only)
3. Press the BLC button.
■ BLC icon ( ) will be displayed.
4. To exit BLC mode, press the BLC button again.
■ Each press of the BLC button toggles:
Normal ➝ BLC ➝ Normal.
4
BLC (
<BLC on>
)
✤
✤
BLC(
Camera(
)
:
-
-
,
-
-
-
,
) M.Cam
,
,
STBY SP
1.
CAMERA
2.
Mode
CARD( ) (
TAPE( ) MEMORY
SC-D353/D354/D355)
3.
■
BLC(
BLC(
)
)
0:00:10
60min
œ
4.
■
,
BLC(
BLC-Nomal(
■
-
BLC(
)
)
)
Nomal-
[ Notes ]
■ When NITE PIX to set to ON, the BLC function does not work. (SC-D352/D354/D355 only)
■ The BLC function will not operate in EASY.Q mode.
■
■
(
NITE PIX
SC-D352/D354/D355)
EASY Q( ) ,
, BLC(
BLC(
)
)
ENGLISH
Basic Recording
Using the Color Nite Shutter
✤ COLOR NITE SHUTTER function works only in Camera mode.
✤ Shutter speed can be controlled, allowing you to record slow moving objects.
✤
COLOR NITE SHUTTER function may produce a brighter image.
1. Set the Power switch to CAMERA .
1
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
✤
✤
✤
3. Press the COLOR NITE SHUTTER button.
4. Each time you press the COLOR NITE SHUTTER button, shutter speed is changed to;
√ Color N. 1/30 , Color N. 1/15 and off.
(SC-D351/D353 only)
√ Color N. 1/30 , Color N. 1/15 , Color N. 1/15 ( ) and off. (SC-D352/D354/D355 only)
3
[ Notes ]
■ The COLOR NITE SHUTTER will not turn ON or
OFF while you are recording.
■ When using COLOR NITE SHUTTER the
■ image takes on a slow motion like effect.
When using the COLOR NITE SHUTTER function,
4 the focus adjusts slowly and the white dots may
■ appear on the screen, this is not a defect.
COLOR NITE SHUTTER is not available while DIS,
Photo image recording or EASY.Q is in use.
■
■
Digital Zoom, Photo image recording,16:9 Wide,
Emboss2, Pastel2, Mirror or Mosaic is not available in the COLOR NITE SHUTTER mode.
If DIS or EASY.Q is set, COLOR NITE SHUTTER mode will be released.
STBY SP
■
0:00:10
60min
œ
Color N.1/30
Camera(
,
)
1.
CAMERA(
2.
Mode
(
TAPE(
SC-D353/D354/D355)
)
)
3.
COLOR NITE SHUTTER( ) .
4.
COLOR NITE SHUTTER( )
;
√ Color N. 1/30 , Color N.1/15 .
( SC-D351/D353)
√ Color N. 1/30 , Color N.1/15 , Color N.1/15
( ) ( SC-D352/D354/D355)
■
■ ,
■
■
,
, ,
, , EASY. Q
■
,16:9 Wide (16:9
Pastel2 ( 2), Mirror (
), Emboss2 (
) Mosaic (
,
2),
EASY.Q
,
)
ENGLISH
Basic Recording
Using the Color Nite Shutter with LED Light
(SC-D352/D354/D355 only)
✤
COLOR NITE SHUTTER function works only in Camera mode.
✤ The LED light enables you to record a subject in dark places without sacrificing color.
✤ The LED light can be used with COLOR NITE SHUTTER function only.
1 1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE .
3. Press the COLOR NITE/LED LIGHT button until
Color N. 1/15 ( ) appears on the display.
✤
✤
✤
LED
LED
Camera(
LED ( SC-D352/D354/D355)
)
,
1.
2.
Mode
3.
CAMERA(
TAPE(
)
)
COLOR NITE /LED LIGHT(
Color N.1/15 ( )
/LED )
[ Notes ]
■ The COLOR NITE/LED LIGHT will not turn ON or
OFF while you are recording.
■ The range of the LED light is limited.
(up to 6.6ft (2m))
3
■
■ LED ( 2 )
LED
■
■
■
■
Danger
The LED light can become extremely hot.
Do not touch it while in operation or soon after turning it off, otherwise serious injury may result.
Do not place the Camcorder into the carrying case immediately after using the LED light, since it remains extremely hot for some time.
Do not use near flammable or explosive materials.
STBY SP 0:00:10
60min
œ
■
■
■
LED
Color N. 1/15
■
LED ,
LED ,
,
,
ENGLISH
Basic Recording
Nite Pix (0 lux recording) (SC-D352/D354/D355 only)
✤ The Nite Pix function works in both Camera and M.Cam modes.
✤ The Nite Pix function enables you to record a subject in darkness.
✤
✤
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE or MEMORY CARD .
(SC-D354/D355 only)
3. Slide the NITE PIX switch to ON.
■ Nite Pix indicator ( ) appears on the LCD
■ screen.
The infrared light is turned on automatically.
4. To cancel the Nite Pix function, slide the NITE PIX switch to OFF .
1
3
(0 LUX ) (
Camera(
SC-D352/D354/D355)
) M.Cam
(0 LUX )
1.
2.
Mode
CARD(
3.
■
■
4.
,
CAMERA( )
) (
TAPE( ) MEMORY
SC-D354/D355)
ON
( )
OFF
■
■
■
■
[ Notes ]
■ The maximum recording distance using the infrared light is about 3 m (about 10 feet).
■ If you use the Nite Pix function in normal recording situations (ex. outdoors by day), the recorded picture may be tinted green.
Nite Pix is not available while taking a photo image.
In the Nite Pix mode, certain functions are not available, such as Exposure, White Balance,
Program AE, Digital Effect and BLC.
■ If focusing is difficult in the auto focus mode when using the Nite Pix function, focus manually.
Do not cover the Infrared Light with your hand.
Do not set the NITE PIX to ON in bright lighting.
It might damage the CCD (Charge Coupled Device).
STBY SP 0:00:10
60min
Nite Pix
œ
■
■
),
■
■
■
Balance(
,BLC(
■
■
CCD
,
),
)
,
,
,
,
3 ( 10
(
)
,
,
:White
ENGLISH
Basic Recording
Power Nite Pix (SC-D352/D354/D355 only)
✤ The Power Nite Pix function works only in Camera mode.
✤
The Power Nite Pix function can record a subject more brightly in darkness than the Nite Pix function.
✤
When you work in Power Nite Pix mode, the Power Nite Pix icon remains on the LCD screen.
✤
Power Nite Pix is not available while taking a photo image or with
EASY.Q is in use.
Power Nite Pix (
✤
✤
✤
✤
Camera
,
EASY.Q
) ( SC-D352/D354/D355)
,
1.
CAMERA( )
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE . (SC-D354/D355 only)
3. Turn on the NITE PIX switch, and then press the
COLOR NITE/LED LIGHT button.
4. Press the COLOR NITE/LED LIGHT button to set shutter speed.
■ When using Power Nite Pix, the image takes on a slow motion like effect.
■ The slow shutter function enables you to record a subject more brightly.
5. Each time you press the COLOR NITE/LED LIGHT button, the shutter speed is changes to Color N.
1/30, Color N. 1/15, Color N. 1/15 ( ) and off in order.
6. To cancel the Power Nite Pix function, press the
COLOR NITE/LED LIGHT button to set to off and then turn off the NITE PIX switch.
1
3
2.
Mode
(
TAPE(
SC-D354/D355)
3.
NITE PIX(
NITE/LED LIGHT
4.
)
COLOR NITE/LED LIGHT
,
[ Notes ]
■ The Power Nite Pix function will not turn ON or
■
4
OFF while you are recording.
The maximum recording distance using the infrared light is about 3 m (about 10 feet).
■ If you use the Power Nite Pix function in normal recording situations (ex. outdoors by day), the
■ recorded picture may contain unnatural colors.
In the Power Nite Pix mode, certain functions are not available, such as Exposure, White Balance,
Program AE, Digital Effect, BLC, Digital Zoom and Manual Focus.
STBY
■
œ
SP
Power Nite Pix
0:00:10
60min
Color N.1/15
6.
■
■
■
White Balance(
,
(
■ ,
)
:
,BLC(
,
COLOR
■
5.
COLOR NITE/LED LIGHT
:
Color N. 1/30 ,Color N.1/15 ,Color N. 1/15
( )
,
, COLOR NITE/LED LIGHT
NITE PIX( ) Off
),
,
),
3
,
( 10 )
),
ENGLISH
Advanced Recording
Use of various Functions
Setting menu items
Available mode
Main
Menu
Sub Menu Functions
Camera
Tape
Program AE
White Balance
Digital Effect
DIS
Digital Zoom
Photo Search
Photo Copy
Record
Memory
!
Audio Select
Rec Mode
Audio Mode
Wind Cut
AV In/Out @
Memory Type #
Photo Quality
M.Play Select
Delete
Delete All
Protect
Print Mark
Copy To
Format
File No.
#
Selecting the Program AE Function
Setting White Balance
Setting the Digital special effect
Selecting the Digital Image Stabilizing
Selecting Digital Zoom
Searching pictures recorded in Tape
Copying still images from a cassette to Memory card
Selecting the Audio playback channel
Selecting the recording speed
Selecting Sound Quality for recording
Minimizing wind noise
Selecting the AV input/output
Selecting the memory type
Selecting Image Quality
Selecting Storage Media (Photo,
Movie) to playback
Deleting Files
Deleting All files
Preventing Accidental Erasure
Print images recorded on a Memory
Card
Copying the image of Memory card to int. memory
Formatting the Memory Card
File Naming Options
Camera Player M.Cam !
M.Player !
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Page
105
✔
103, 104
✔
✔
✔
99, 100
99
97, 98
✔
108, 109
107
101
93
78
54
55
56
76
90
91, 92
63, 64
59
65, 66
61
67
68
( !
): SC-D353/D354/D355 only
( @ ): SC-D355 only
( # ): SC-D354/D355 only
!
( !
):
( @ ):
( # ):
@
#
#
SC-D353/D354/D355
SC-D355
SC-D354/D355
M.Cam !
M.Player !
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
63, 64
59
65, 66
61
67
✔
91, 92
✔
✔
✔
✔
✔
✔
✔
103, 104
99, 100
99
97, 98
108, 109
107
101
93
68
56
76
90
105
78
54
55
ENGLISH
Advanced Recording
Main
Menu
Sub Menu Functions
Display LCD Bright
LCD Color
System
Date/Time
TV Display
Clock Set
Remote #
Beep Sound
Shutter Sound !
USB Version $
USB Connect $
Language
Demonstration
Setting the Brightness tone of the
LCD screen
Setting the Color tones of the LCD screen
Setting the Date and Time
Selecting OSD on/off of TV
Setting the time
Using the remote control
Setting the Beep sound
Setting the Shutter sound
Setting the USB Version
Setting the USB
Selecting the OSD language
Demonstration
Available mode
Camera Player M.Cam !
M.Player !
Page
✔ ✔ ✔ ✔
32
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
32
30
83
82
26
31
33
34
27
28
29
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
( !
): SC-D353/D354/D355 only
( # ): SC-D354/D355 only
( $ ): SC-D352/D353/D354/D355 only
( !
):
( # ):
( $ ):
!
$
$
#
SC-D353/D354/D355
SC-D354/D355
SC-D352/D353/D354/D355
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
M.Cam !
M.Player !
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
30
83
82
26
31
32
32
33
34
27
28
29
ENGLISH
Advanced Recording
Function availability in each Mode
Operating
Mode
DIS
Requested
Mode
Digital Zoom
PHOTO (TAPE)
Color Nite Shutter
16:9 Wide
Digital
Effects
Emboss2
Pastel2
Mirror
Mosaic the other
Digital Effect
Nite Pix !
DIS
✕
O
O
Digital functions
Digital Zoom
✕
PHOTO
(TAPE)
✩
✩
✕
✕
✕
✕
✕
Color Nite
Shutter
✕
✩
✕
✕
O
16:9
Wide
✕
✩
✕
✕
Digital Effects
Emboss2, Pastel2
Mirror, Mosaic
✕
✩
✕
✕ the other
Digital Effect
O
Nite Pix !
O
O
✕
O
O
✕
O
DIS
Digital Zoom
PHOTO (TAPE)
O
O
O
O
O
O ✕ ✕ ✕
O : The requested mode will work in this operating mode.
✕
: You can not change the requested mode.
: The requested mode will work.
✩
: The requested mode will work.
(operating mode data will be backed up.)
! : This Function works on models SC-D352/D354/D355 only.
O :
X :
✩
:
!
:
:
(
2
!
2
✕
O
O
,
✕
✕
✕
✕
✕
O
O
,
PHOTO(TAPE)
✩
✩
O
O
✕
✕
O
SC-D352/D354/D355.
✕
✩
✕
✩
)
O
O
✕
✕
✕
✩
✕
✕
✕
✕
✩
✕
O
O
✕
O
!
O
O
✕
O
✕
[ Note ]
When you select an item that cannot be changed, an error message will be displayed.
,
ENGLISH
Advanced Recording
Selecting the Record Mode Record Mode ( )
✤ The Record Mode function works in both Camera and Player
(DV IN) modes.
✤ This Camcorder records and plays back in SP (standard play) mode and in LP (long play) mode.
SP (standard play): This mode permits 60 minutes of recording
✤
(
✤ SP(
SP(
Camera
) (DV IN)
)
) time with a DVM60 tape.
LP (long play): This mode permits 90 minutes of recording time with a DVM60 tape.
4
1. Set the Power switch to CAMERA or PLAYER .
Camera Mode
√ Record
Rec Mode 2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
Audio Mode
Wind Cut
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Record , then press the Menu selector .
Move Select
LP(
√ SP
√ 12Bit
√ Off
MENU Exit
1.
3.
):
:
LP(
PLAYER(
■
Player(
MENU( )
)
)
,
DVM60
DVM60
CAMERA(
)
2.
Mode
(
TAPE(
SC-D353/D354/D355)
)
Record Mode
)
90
:
60
5. Move the Menu selector to the left or right to select Rec Mode , then press the Menu selector .
6. Move the Menu selector to the left or right to select desired record mode( SP or LP ), then press the Menu selector .
7. To exit, press the MENU button.
■ The selected icon will be displayed.
6
Camera Mode
Back
Rec Mode
Audio Mode
Wind Cut
Move Select
SP
LP
MENU Exit
4.
5.
6.
Record ,
Menu selector(
Menu selector(
Menu selector(
Rec Mode , Menu selector(
Menu selector(
( SP LP ), Menu selector(
)
)
)
)
)
)
[ Notes ]
■ We recommend that you use this Camcorder to play back any tapes recorded on this Camcorder.
Playing back a tape recorded in other equipment may produce mosaic shaped distortion.
■
7
When you record a tape in SP and LP modes, or LP mode only, the playback picture may be distorted or
■ the time code may not be written properly if there is a gap between scenes.
Record using SP mode for best picture and sound quality.
STBY SP
œ
60min
■
7.
■
■
■
LP
, MENU(
,
SP LP
,
SP(
)
)
,
ENGLISH
Advanced Recording
Selecting Audio Mode
✤ The Audio Mode function works in both Camera and Player modes.
✤ This Camcorder records sound in two ways. (12Bit, 16Bit)
12Bit: You can record two 12Bit stereo sound tracks.
The original stereo sound can be recorded onto the Main
(Sound1) track. Additional stereo sound can be dubbed onto the Sub (Sound2) track.
16Bit: You can record one high quality stereo sound using the
16Bit recording mode.
Audio dubbing is not possible when using this mode.
Audio Mode (
✤
(
✤
12
Camera
)
:
16 :
)
Player( )
16
12
. (12 ,16 )
MAIN( )(SOUND 1)
SUB( )(SOUND 2)
,
Audio Mode
,
1. Set the Power switch to CAMERA or PLAYER .
4
1.
( )
CAMERA( ) PLAYER
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
Camera Mode
√ Record
Rec Mode
Audio Mode
Wind Cut
√ SP
√ 12Bit
√ Off
2.
Mode
(
TAPE(
SC-D353/D354/D355)
)
3. Press the MENU button.
■ The menu list will appear.
)
Move Select MENU Exit
3.
■
MENU(
4. Move the Menu selector to the left or right to select Record , then press the Menu selector .
6
5. Move the Menu selector to the left or right to select Audio Mode , then press the Menu selector .
6. Move the Menu selector to the left or right to select desired audio mode( 12Bit or 16Bit ), then press the Menu selector .
7
7. To exit, press the MENU button.
[ Note ]
When 12Bit is selected, no 12Bit indication will be displayed on the screen.
Camera Mode
Back
Rec Mode
Audio Mode
Wind Cut
Move Select
STBY SP
4.
Record ,
Menu selector(
Menu selector(
12Bit
16Bit
5.
(
Menu selector(
Audio Mode( ) ,
)
MENU Exit
0:00:10
60min
16Bit
œ
6.
7.
Menu selector(
( 12 16 ),
Menu selector( )
, MENU( )
)
)
)
)
Menu selector
12 ,
ENGLISH
Advanced Recording
Cutting Off Wind Noise (Wind Cut)
✤ The Wind Cut function works in both Camera and Player (Audio dubbing) modes.
Use the Wind Cut when recording in windy places such as the beach or near buildings.
✤
The Wind Cut function minimizes wind noise or other noise while recording.
When the wind cut is on, some low pitched tones are eliminated along with the sound of the wind.
1. Set the Power switch to CAMERA or PLAYER .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Record , then press the Menu selector .
5. Move the Menu selector to the left or right to select Wind Cut , then press the Menu selector .
6. To activate the Wind Cut function, move the
Menu selector to the left or right to select On , then press the Menu selector .
7. To exit, press the MENU button.
■ Wind Cut ( ) icon will be displayed on the
LCD screen when you turn the Wind Cut
On.
4
6
7
Move
Camera Mode
Back
Rec Mode
Audio Mode
Wind Cut
Move
Wind Cut (
✤ Camera
)
Wind Cut(
✤
Wind Cut(
Wind Cut(
)
)
Camera Mode
√ Record
Rec Mode
Audio Mode
Wind Cut
√ SP
√ 12Bit
√ Off
Select MENU Exit
Off
On
Select MENU Exit
STBY SP 0:00:10
60min
)
)
1.
PLAYER(
Player(
,
2.
Mode
(
TAPE(
SC-D353/D354/D355)
3.
■
MENU( )
5.
(
Menu selector( ind Cut( ) ,
)
6.
( )
Menu selector(
,
On
)
CAMERA(
)
,
)
Wind Cut(
4.
Record ,
Menu selector(
Menu selector(
)
)
)
Menu selector
Menu selector
,
)
)
[ Note ]
Make sure Wind Cut is set to off when you want the microphone to be as sensitive as possible.
œ 7.
■
, MENU(
Wind Cut(
)
) ,
, Wind Cut( )
ENGLISH
Advanced Recording
Setting the Shutter Speed & Exposure
✤ You can set Shutter Speed only in Camera mode.
✤ The Exposure function works in both Camera and M.Cam modes.
✤
Quick menu is used to access Camcorder functions by simply using the
Menu selector.
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. Press the Menu selector .
■ Quick menu list will appear.
4. Move the Menu selector to the left or right to select
Shutter or Exposure , then press the Menu selector .
5. Move the Menu selector to the left or right to select
3
Manual , then press the Menu selector .
6. Move the Menu selector to the left or right to select desired shutter speed or exposure, then press the
Menu selector .
■ Shutter speed can be set to 1/60 , 1/100 , 1/250 ,
■
1/500 , 1/1000 , 1/2000 , 1/4000 or 1/10000 .
Exposure value can be set between
7. To exit, press the MENU button.
00 and 29 .
■ Selected settings are displayed on the screen.
5
DIS
Program AE
White Balance
Shutter
Exposure
Manual Focus
MENU Exit
DIS
Program AE
White Balance
Shutter
Exposure
Manual Focus
MENU Exit
STBY
Off
STBY
✤
✤
✤
SP
SP
…
Manual
†
Recommended Shutter Speeds when Recording
✤ Outdoor sports such as golf or tennis: 1/2000 or 1/4000
✤ Moving cars or trains or other rapidly moving vehicles such as roller coasters: 1/1000, 1/500 or
6
1/250
✤
Indoor sports such as basketball: 1/100
S. 1/60 †
…
Shutter Speed&Exposure (
Camera
Camera
Menu selector(
M.Cam
)
0:00:10
60min
0:00:10
60min
✤
✤
✤
)
1.
2.
Mode
3.
4.
CAMERA(
TAPE(
( SC-D353/D354/D355)
Menu selector(
■
Menu selector(
Shutter
Menu selector(
Exposure
)
5.
6.
7.
)
)
,
)
)
( ) ,
Menu selector(
Menu selector(
Menu selector(
Exposure ,
)
) Manual
)
Menu selector(
■
)
1/60,1/100,1/250,1/500,1/1000,1/2000,1/4000
1/10000
■ 00 29
, MENU( )
■
,
:1/1000,1/500,1/250
:1/100
:1/2000 1/4000
[ Notes ]
■ If you manually change the Shutter Speed and the
Exposure value when Program AE option is selected,
■ manual changes are applied first.
The image may not seem as smooth when a high Shutter
■
[29] †
Speed is set.
The Camcorder returns to the auto shutter and auto exposure settings
■ when you set the NITE PIX to ON, or change to the EASY.Q mode.
(SC-D352/D354/D355 only)
When recording with a Shutter Speed of 1/1000 or higher, make sure the sun is not shining into the lens.
■
■
■
■
…
■
,
EASY Q( ) NITE PIX( )
( SC-D352/D354/D355)
SHUTTER SPEED( ) 1/1000
1/1000
Program AE
,
,
,
,
,
ENGLISH
Advanced Recording
Auto Focus/Manual Focus
✤ The Auto Focus/Manual Focus function works in both Camera and
M.Cam modes.
✤
In most situations, it is better to use the automatic focus feature, as it enables you to concentrate on the creative side of your recording.
✤ Manual focusing may be necessary under certain conditions that make automatic focusing difficult and/or unreliable.
Manual Focus can be set in the Quick Menu.
Auto Focusing
✤ If you are inexperienced in the use of
Camcorders, we recommend that you make use of Auto Focus.
a
Manual Focusing
✤ In the following situations, you may obtain better results by adjusting the focus manually.
c a. A picture containing several objects, some close to the Camcorder, others further away.
b. A person enveloped in fog or surrounded by snow.
c. Very shiny or glossy surfaces like a car.
d. People or objects moving constantly or quickly like an athlete or a crowd.
4
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE or MEMORY CARD .
(SC-D353/D354/D355 only)
3. Press the Menu selector .
4. Move the Menu selector to the left or right to select Manual Focus , then press the Menu selector .
5
5. Move the Menu selector to the left or right to select On , then press the Menu selector .
■ M.Focus ( ) icon will blink.
6. Move the Menu selector to the left or right until the object is in focus.
DIS
Program AE
White Balance
Shutter
Exposure
Manual Focus
MENU Exit
œ
STBY
On
STBY
Auto Focus /Manual Focus (
✤ Camera
✤
✤ b d
SP
…
†
SP
0:00:10
60min
0:00:10
60min
,M.Cam
✤
✤ a.
b.
c.
d.
,
,
MF/AF(
,
,
,
,
,
/
)
1.
2.
3.
4.
5.
6.
Mode
CARD( )
CAMERA
(
TAPE( ) MEMORY
SC-D353/D354/D355)
)
■
Menu selector(
Menu selector(
Manual Foucs( ) ,
Menu selector( )
Menu selector(
Menu selector(
M.Focus( )
Menu selector(
)
)
)
)
On
)
,
[ Note ]
Manual Focus is not available in the EASY.Q mode.
EASY Q
ENGLISH
Advanced Recording
Setting the White Balance White Balance
✤ The White Balance function works in both Camera and M.Cam
modes.
✤ The White Balance is a recording function that preserves the unique image color of the object in any recording condition.
✤ You may select the appropriate White Balance mode to obtain good quality image color.
■ Auto (
A
): This mode is generally used to control the White
■
Balance automatically.
Hold ( ):This holds the current White Balance
■ value.
Indoor ( ): This controls the White
Balance according to the indoor ambience.
Camera Mode
√ Camera
Program AE
- Under halogen or studio/video lighting
- Subject is of one dominant color
White Balance
Digital Effect
■
- Close up
Outdoor ( ): This controls the White Balance
4
DIS
Digital Zoom according to the outdoor ambience.
In daylight, especially for close up and where
Move
✤
✤
✤
■
■
■
√ Auto
√ Auto
√ Off
√ Off
√ Off
Select MENU
Auto(
A
)(
Exit
Camera
Hold( )(
Indoor( )(
1.
■ the subject is of one dominant color.
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE or MEMORY CARD .
(SC-D353/D354/D355 only)
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Camera , then press the Menu selector .
5. Move the Menu selector to the left or right to select White Balance , then press the Menu selector .
6. Move the Menu selector to the left or right to
6
7 select desired mode( Auto , Hold , Indoor or
Outdoor ), then press the Menu selector .
7. To exit, press the MENU button.
■ When the Auto mode is selected, no icon will be displayed on the screen.
œ
Camera Mode
Back
Program AE
White Balance
Digital Effect
DIS
Digital Zoom
Move
STBY
Select
SP
Auto
Hold
Indoor
Outdoor
A
MENU Exit
0:00:10
60min
<When the Outdoor option was selected>
):
):
-
-
-
):
M.Cam
-
Outdoor( )(
,
):
White Balance(
CAMERA
2.
3.
4.
5.
Mode TAPE(
CARD( ) (
Menu selector(
SC-D353/D354/D355)
)
■
Camera ,
Menu selector(
Menu selector(
)
Menu selector(
White Balance ,
) MEMORY
)
Menu selector
)
( )
6.
7.
( ,
Menu selector(
, ),
Menu selector(
, MENU(
■ Auto( ) ,
)
)
)
)
ENGLISH
Advanced Recording
Using Quick Menu: White Balance
✤ Quick menu is used to access Camcorder functions by using the
Menu selector.
✤ Quick menu provides easier access to frequently used menus without using the MENU button.
✤
✤
Menu selector(
, MENU
),
,
1. Press the Menu selector .
1
STBY SP 0:00:10
60min
2. Move the Menu selector to the left or right to select
White Balance , then press the Menu selector .
Off
3. Move the Menu selector to the left or right to select desired mode( Auto , Hold , Indoor or Outdoor ), then press the Menu selector .
DIS
Program AE
White Balance
Shutter
Exposure
Manual Focus
MENU Exit
3
STBY SP 0:00:10
4. To exit, press the MENU button.
60min
DIS
Program AE
White Balance
Shutter
Auto
…
†
A
■
■
[ Notes ]
■ When NITE PIX is set to ON, the White Balance function does not work.
■
■
(SC-D352/D354/D355 only)
The White Balance function will not operate in
4
EASY.Q mode.
Turn the Digital Zoom off (if necessary) to set a more accurate white balance.
Reset the white balance if lighting conditions change.
Exposure
Manual Focus
MENU Exit
œ
STBY SP 0:00:10
60min
During normal outdoor recording, setting to Auto may provide better results.
<When the Outdoor option was selected>
1.
4.
■
■
■
■
■
Menu selector(
, MENU(
,
,
)
)
2.
Balance ,
Menu selector(
Menu selector(
)
3.
(
( Auto (
Menu selector(
) , Hold (
Outdoor (
)
) ),
) ,
)
Indoor (
Menu selector
)
NITE PIX(
(
) ,
SC-D352/D354/D355)
EASY.Q
, Digital Zoom
Auto(
,
White
)
) ,
ENGLISH
Advanced Recording
Setting the Digital Image Stabilizer (DIS) DIS (Digital Image Stabilizer )
✤ The DIS function works only in Camera mode.
✤
DIS (Digital Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the Camcorder
(within reasonable limits).
✤ It provides more stable pictures when:
- Recording with the zoom (DIS is not available in Digital Zoom mode.)
- Recording a small object close-up
- Recording and walking at the same time
- Recording through the window of a vehicle
4
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
Camera Mode
√ Camera
Program AE
White Balance
Digital Effect
DIS
Digital Zoom
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Camera , then press the Menu selector .
Move
✤
✤ DIS(
✤
√ Auto
√ Auto
√ Off
√ Off
√ Off
Select
-
-
-
-
MENU Exit
5. Move the Menu selector to the left or right to select DIS , then press the Menu selector .
6
6. To activate the DIS function, move the Menu selector to the left or right to select On , then press the Menu selector .
■ If you do not want to use the DIS function, set the DIS menu to Off .
Camera Mode
Back
Program AE
White Balance
Digital Effect
DIS
Digital Zoom
Move Select
Off
On
MENU Exit
7. To exit, press the MENU button.
■ DIS( ) icon is displayed on the LCD screen.
7
STBY SP 0:00:10
60min œ
[ Notes ]
■ Digital Zoom, COLOR NITE SHUTTER, 16:9 Wide,
Emboss2, Pastel2, Mirror or Mosaic is not available in the DIS mode.
■ When you press the PHOTO button while the DIS function is enabled, the DIS will be released shortly and resume automatically after the photo recording.
(
Camera
)
,
5.
6.
7.
■
■
.(
)
DIS(
:
1.
2.
Mode
3.
(
CAMERA
TAPE(
SC-D353/D354/D355)
MENU( )
■
4.
Menu selector(
Camera Menu selector(
)
(
Menu selector(
) , Menu selector(
DIS(
Menu selector(
Menu selector(
■
) ,
)
)
,
)
On
DIS
,
■
Off( )
,
DIS( )
MENU( )
DIS
Wide (16:9
2), Mirror (
DIS
,
), Emboss2 (
) Mosaic (
,
PHOTO
)
)
)
)
DIS
)
,16:9
2), Pastel2 (
)
,DIS
ENGLISH
Advanced Recording
Using Quick Menu: Digital Image Stabilizer (DIS)
✤ Quick menu is used to access Camcorder functions by simply using the Menu selector.
✤
Quick menu provides easier access to the frequently used menus without using the MENU button.
✤
✤
: DIS(Digital Image Stabilizer
Menu selector( ),
, MENU
)
,
1. Press the Menu selector .
2. Move the Menu selector to the left or right to select DIS , then press the Menu selector .
1
3. Move the Menu selector to the left or right to select On or Off , then press the Menu selector .
4. To exit, press the MENU button.
2
[ Notes ]
■ It is recommended that you deactivate the DIS
■ function when using a tripod.
If you use the DIS function, the picture quality may
■ deteriorate.
EASY.Q mode automatically sets the DIS to On.
STBY SP
DIS
Program AE
White Balance
Shutter
Exposure
Manual Focus
MENU Exit
Off
0:00:10
60min
DIS
Program AE
White Balance
Shutter
Exposure
Manual Focus
MENU Exit
STBY
On
SP
…
†
0:00:10
60min
œ
STBY SP 0:00:10
60min
■
■
■
1.
2.
(
3.
(
(
4.
Menu selector( )
Menu selector(
) , Menu selector(
) DIS
)
) Off(
)
Menu selector(
) ,
)
Menu selector
On
, MENU( )
DIS
EASY.Q
,
,
,
ENGLISH
Advanced Recording
Programmed Automatic Exposure Modes (Program AE) (Program AE)
✤ The Program AE function works only in Camera mode.
✤
The Program AE mode allows you to adjust shutter speeds and apertures to suit different recording conditions.
✤
They give you creative control over the depth of field.
✤
✤ Program AE(
(Program AE)
)
✤
,
■
Auto mode ( A )
Auto balance between the subject and the background.
To be used in normal conditions.
The shutter speed automatically varies from 1/60 to 1/250 per second, depending on the scene.
œ
STBY
■ Sports mode ( )
For recording people or objects moving quickly.
■
Portrait mode ( )
For focusing on the background of the subject, when the background is out of focus.
The Portrait mode is most effective when used outdoors.
The shutter speed automatically varies from 1/60 to 1/1000 per second.
SP 0:00:10
60min
■
Portrait(
-
-
-
■ Auto(
-
-
-
A
1/250
■ Sport(
-
)
1/60
)
)
1/1000
Camera
,
■ Spotlight mode ( )
For recording correctly when there is only light on the subject and not the rest of the picture.
■ Sand/Snow mode ( )
For recording when people or objects are darker than the background because of reflected light from sand or snow.
■ High Speed(High Shutter Speed) mode ( )
For recording fast-moving subjects such as players in golf or tennis games.
■ Spotlight(
-
■
Sand/Snow(
-
■ High Speed(
-
)
)
,
)
,
,
[ Notes ]
■ While setting the NITE PIX to ON, the Program AE function does not work. (SC-D352/D354/D355 only)
■ The Program AE function will not operate in EASY.Q mode.
■
■
(
NITE PIX( )
SC-D352/D354/D355)
EASY Q( ) ,
,
Program AE(
,
1/60
,
)
ENGLISH
Advanced Recording
Setting the Program AE
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
4
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Camera , then press the Menu selector .
6
5. Move the Menu selector to the left or right to select Program AE , then press the Menu selector .
■ The available options are listed.
6. Move the Menu selector to the left or right to select desired Program AE option, then press the
Menu selector .
7. To exit, press the MENU button.
■ The icon of the selected mode will be
■ displayed on the LCD screen.
When the Auto mode is selected, no icon will be displayed on the screen.
1
Camera Mode
√ Camera
Program AE
White Balance
Digital Effect
DIS
Digital Zoom
√ Auto
√ Auto
√ Off
√ Off
√ Off
Move Select MENU Exit
Camera Mode
Back
Program AE
White Balance
Digital Effect
DIS
Digital Zoom
Move Select
Auto
Sports
Portrait
Spotlight
Sand/Snow
High Speed
A
MENU Exit
STBY SP
DIS
Program AE
White Balance
Shutter
Exposure
Manual Focus
MENU Exit
Off
0:00:10
60min
Using Quick Menu: Program AE
1. Press the Menu selector .
2. Move the Menu selector to the left or right to select Program AE , then press the
Menu selector .
3. Move the Menu selector to the left or right to select desired Program AE option, then press the
Menu selector .
4. To exit, press the MENU button.
3
DIS
Program AE
White Balance
Shutter
Exposure
Manual Focus
MENU Exit
STBY SP
Auto
…
†
A
0:00:10
60min
(Program AE)
1.
3.
■
CAMERA
2.
Mode
(
TAPE(
SC-D353/D354/D355)
MENU( )
4.
Camera
Menu selector(
Menu selector(
)
)
5.
Menu selector(
Program AE
■
, Menu selector(
)
6.
(
Menu selector(
,
)
Menu selector
)
7.
■
■
, MENU(
Auto ,
)
(Program AE)
1.
2.
3.
4.
(
Menu selector( )
(
Menu selector(
Program AE , Menu selector
)
)
,
Menu selector(
,
)
Menu selector
)
MENU( )
)
) .
ENGLISH
Advanced Recording
Applying Digital Effects
✤ The Digital Effect function works only in Camera mode.
✤
The Digital Effects enable you to give a creative look to your recording.
✤
Select the appropriate Digital Effect for the type of picture that you wish to record and the effect you wish to create.
✤ There are 11 Digital Effect modes.
1
1. Art mode
This mode gives the images a coarse effect.
2. Mosaic mode
This mode gives the images a mosaic effect.
3
3. Sepia mode
This mode gives the images a reddish-brown pigment.
4. Negative mode
This mode reverses the colors, creating a negative image.
5. Mirror mode
This mode cuts the picture in half, using a mirror effect.
6. BLK & WHT mode
This mode changes the images to black and white.
7. Emboss1 mode
This mode creates a 3D effect (embossing).
8. Emboss2 mode
This mode creates a 3D effect (embossing) on surrounding area of an image.
9. Pastel1 mode
This mode applies a pale pastel drawing effect to an image.
10. Pastel2 mode
This mode applies a pale pastel drawing effect to surrounding area of an image.
11. 16:9 Wide mode
Select to record a picture to be played back on a 16:9 Wide TV.
5
7
9
11
Digital Effects
✤
✤
✤
✤
11
Camera
,
2 1. Art(
4
6
8
10
10. Pastel2(
11. 16:9 Wide(
16:9
2)
2. Mosaic (
3. Sepia(
)
4. Negative(
5. Mirror(
7. Emboss1(
8. Emboss2(
9. Pastel1(
16:9)
)
,
)
6. BLK &WHT(
1)
)
)
)
,
1)
3D
2)
,
3D
ENGLISH
Advanced Recording
Selecting the Digital Effects
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Camera , then press the Menu selector .
5. Move the Menu selector to the left or right to select Digital Effect , then press the
Menu selector .
6. Move the Menu selector to the left or right to select the desired Digital Effect mode, then press the Menu selector .
■ The display mode is set to the selected mode.
7. To exit, press the MENU button.
4
1
Camera Mode
√ Camera
Program AE
White Balance
Digital Effect
DIS
Digital Zoom
√ Auto
√ Auto
√ Off
√ Off
√ Off
1.
2.
Mode
3.
(
CAMERA(
TAPE(
SC-D353/D354/D355)
MENU( )
■
4.
Menu selector(
Camera Menu selector(
)
5.
6.
)
)
)
(
Menu selector(
Digital Effect( ) ,
)
Menu selector(
.
Menu selector
Menu selector(
)
)
)
■
[ Notes ]
■ The Pastel2, Emboss2, Mirror, Mosaic or 16:9
Wide modes are not available while DIS or
■
■
6
COLOR NITE SHUTTER is in use.
Digital Effect modes are not available while EASY.Q
or NITE PIX (SC-D352/D354/D355 only) is in use.
Once DIS, EASY.Q or COLOR NITE SHUTTER is set, 16:9 Wide, Emboss2, Pastel2, Mirror or Mosaic modes will be released.
■
■
■
Digital Zoom is not available in the 16:9 Wide, Emboss2, Pastel2,
Mirror or Mosaic modes.
Digital Effect modes other than 16:9 Wide, Emboss2, Pastel2,
Mirror or Mosaic are available while DIS is in use.
Setting the NITE PIX (SC-D352/D354/D355 only) while Digital
Effect is in use releases the Digital Effect, and releasing the NITE
PIX (SC-D352/D354/D355 only) will set the Digital Effect to Off
■ mode.
Photo image recording is not available in the 16:9 Wide mode.
Move Select MENU Exit
Camera Mode
Back
Program AE
White Balance
Digital Effect
DIS
Digital Zoom
Move
Off
Art
Mosaic
Sepia
Negative
Select
Mirror
▼
MENU Exit
■
■
7.
■
■
, MENU( )
(
Pastel2 (
Wide (16:9
2), Emboss2 (
), Mirror ( ) Mosaic (
2), 16:9
)
, DIS
EASY Q( ) NITE PIX( )
SC-D352/D354/D355) ,
■
SHUTTER(
Emboss2 (
EASY Q(
) MOSAIC (
)
2),Pastel 2 (
)
) COLOR NITE
,16:9WIDE (16:9
2) , MIRROR(
(
16:9 Wide (16:9
) Mosaic (
), Emboss2 (
)
2),Pastel2 (
Digital Zoom
) NITE PIX(
( SC-D352/D354/D355)
NITE PIX( ) ( SC-D352/D354/D355)
,
2), Mirror
),
■ , 16:9 Wide( 16:9)
ENGLISH
Advanced Recording
Zooming In and Out with Digital Zoom
✤ Zoom works only in Camera mode.
✤
Digital Zoom (
Camera
)
Selecting the Digital Zoom
✤
Zooming more than 20x is achieved digitally, up to 900x when combined with optical zoom.
✤
The picture quality may deteriorate depending on how much you zoom in on the subject.
✤
We recommend that you use the DIS feature with
Digital Zoom for picture stability. (see page 61)
1
✤
✤
✤
)
2X(20 )
Digital Zoom
( 61 ).
,
,
900
DIS(
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Camera , then press the Menu selector .
5. Move the Menu selector to the left or right to
4 select Digital Zoom , then press the Menu selector .
6. Move the Menu selector to the left or right to select desired zoom mode( Off , 100x , 200x , 400x or 900x ), then press the Menu selector .
7. To exit, press the MENU button.
Camera Mode
√ Camera
Program AE
White Balance
Digital Effect
DIS
Digital Zoom
Move
√ Auto
√ Auto
√ Off
√ Off
√ Off
Select MENU Exit
1.
2.
Mode
3.
(
CAMERA(
TAPE(
SC-D353/D354/D355)
MENU( )
■
4.
Camera
Menu selector(
Menu selector(
)
5.
6.
7.
(
Menu selector(
Digital Zoom( ) ,
(
)
Menu selector(
Off (
)
Menu selector
)
, 100 , 200 , 400 900
).
Menu selector( )
, MENU( )
)
)
)
[ Notes ]
■ Maximum zooming may result in lower picture
■ quality.
Digital Zoom is not available while DIS, EASY.Q,
■
6 taking a photo image, COLOR NITE SHUTTER, 16:9
Wide, Emboss2, Pastel2, Mirror or Mosaic is in use.
Once taking a photo image, COLOR NITE
SHUTTER, 16:9 Wide, Emboss2, Pastel2, Mirror or
Mosaic is set, Digital Zoom mode will be released.
■
Camera Mode
Back
Program AE
White Balance
Digital Effect
DIS
Digital Zoom
Move
(The Digital Zoom mode will be backed up.)
Once DIS or EASY.Q is set, Digital Zoom mode will be released.
Select
■
■
Off
100x
200x
400x
900x
MENU Exit
■
■ DIS
SHUTTER(
Emboss2 (
Mosaic (
,
,EASY.Q
,
),16:9 Wide (16:9
2),Pastel2 (
, COLOR NITE
),
2),Mirror ( )
) Digital Zoom
(16:9
MOSAIC (
)
, COLOR NITE SHUTTER(
), Emboss2 ( 2), Pastel 2 (
) ,
DIS ,EASY.Q
,
(
), 16:9 WIDE
2), MIRROR( )
ENGLISH
Advanced Recording
Photo Image Recording
✤ Photo image recording works only in Camera mode.
1. Set the Power switch to CAMERA .
2. Set the Mode switch to TAPE . (SC-D353/D354/D355 only)
3. Press the PHOTO button.
■ The still picture is recorded for about 6~7 seconds.
4. After the PHOTO has been recorded, the Camcorder returns to its previous status.
Searching for a Photo Image
✤ The Photo Search works only in Player mode.
1. Set the Power switch to PLAYER .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select
Tape , then press the Menu selector .
5. Move the Menu selector to the left or right to select
Photo Search , then press the Menu selector .
4
6. Press the / (REW/FF) buttons to select the photo.
■ The photo search process appears on LCD screen
■
6 while you are searching.
After completing the search, the Camcorder displays the still image.
7. To exit, press the (STOP) or MENU button.
Player Mode
√ Tape
Photo Search
Photo Copy
Audio Select
Move
Photo Search
√ Sound[1]
Select MENU Exit
SP 0:41:56:10
25min
[ Notes ]
■ Taking a photo image while recording a video is not
■ available.
You can use the remote control to take a photo by using the
PHOTO button on the remote control. Pressing the PHOTO button on the remote control records the still image at once
■ with automatic focusing. (SC-D354/D355 only)
When there are no still images recorded on the tape, it will be fully rewound or forwarded.
■
■
Taking a photo image is not available while COLOR NITE
SHUTTER or 16:9 Wide is in use.
DIS, Digital Zoom, COLOR NITE SHUTTER, Digital Effect and Nite Pix (SC-D352/D354/D355 only) are not available,
■
œ √ when take a photo image.
Taking a photo image while EASY.Q, DIS or Digital Zoom mode is in use will the mode.
(After a photo image is taken, the mode will return automatically.)
œ /
Search
Photo Search
Cancel
Photo searching...
Search
SP
Cancel
■
MENU Exit
0:44:38:03
25min
MENU Exit
✤
1.
2.
Mode
(
3.
Camera
SC-D353/D354/D355)
PHOTO( )
■
CAMERA(
TAPE(
4.
,
,
)
)
6~7
✤
1.
Player(
Photo Search(
)
)
,
PLAYER(
2.
Mode
3.
(
TAPE(
SC-D353/D354/D355)
MENU( )
■
4.
(
)
) ,
Menu selector(
Menu selector(
)
)
) 5.
6.
7.
■
■
Menu selector(
Photo Search(
Menu selector(
) ,
)
/ ( REW (
))
,
,
,
(STOP )
Tape
)/ FF (
)
■
■
■
■
■
PHOTO
(
.
SC-D354/D355)
,
COLOR NITE SHUTTER(
16:9Wide
DIS
COLOR NITE SHUTTER(
,NITE PIX( ) (
)
, ,
) ,
SC-D352/D354/D355)
EASY.Q,DIS
)
(
ENGLISH
Playback
Playing Back a Tape You have recorded on the LCD Screen
✤ The playback function works only in Player mode.
✤
You can monitor the playback picture on the LCD screen.
1. Set the Power switch to PLAYER .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. Insert the tape you wish to view. (see page 36)
4. Open the LCD screen.
■ Adjust the angle of the LCD screen and set the brightness or color if necessary.
5. Press the (REW) button to rewind the tape to the starting point.
■
■
To stop rewinding, press the (STOP) button.
The Camcorder stops automatically after rewinding is complete.
6. Press the (PLAY/STILL) button to start playback.
■ You can view the picture you recorded on the
LCD screen.
■ To stop the play operation, press the (STOP) button.
Adjusting the LCD Bright/Color during Playback
✤
You can adjust the LCD Bright/Color during playback.
✤ The adjustment method is the same procedure as used in Camera mode. (see page 32)
1
3
5
✤
✤
Player(
1.
6.
■
■
[ Notes ]
■ You can also view the picture on a TV screen, after connecting the
Camcorder to a TV or VCR. (see page 71~72)
Various functions are available in Player mode. (see page 73)
For searching and viewing still images recorded onto tape.
(see page 68)
■
■
■
( 71~72 )
✤
✤
4.
■
5.
■
■
■
■
)
73
(REW(
,
,
,
,
PLAYER(
2.
Mode
(
TAPE(
SC-D353/D354/D355)
3.
( 36 )
))
(PLAY/STILL(
,
(STOP(
/
(STOP(
/
( 32 )
68
)
))
,
))
)
))
,
ENGLISH
Playback
Controlling Sound from the Speaker
✤ The Speaker works only in Player mode.
✤ When you use the LCD screen for playback, you can hear recorded sound from the built-in Speaker.
- Take the following steps to lower the volume or mute the sound while playing a tape on the Camcorder.
✤
✤
-
1. Set the Power switch to PLAYER .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. Press the (PLAY/STILL) to play the tape.
4. When you hear sounds once the tape is in play, use the Menu selector to adjust the volume.
■ A volume level display will appear on the LCD
■ screen.
Levels may be adjusted from anywhere between
00 to 19 and you will not hear any sound when the volume is set on 00.
If you close the LCD screen while playing, you will not hear sound from the speaker.
3
4
√ SP 0:46:00:11
60min
[ Notes ]
■ When the AV cable is connected to the Camcorder, you cannot hear sound from the Built-In Speaker
■ and cannot adjust the volume.
The sound will return when you remove the connected AV cable from the jack of your
Camcorder.
[05]
†
…
■
■
Player ( )
,
1.
PLAYER(
2.
Mode
(
TAPE(
SC-D353/D354/D355)
3.
(PLAY/STILL(
)
)
))
4.
■
■
AV
00 19
00
,
,
ENGLISH
Playback
Tape Playback
✤ The playback function works only in Player mode.
Playback on the LCD Screen
✤ It is practical to view a tape using the LCD screen when in a car or outdoors.
✤
✤
Player(
Playback on a TV Monitor
✤
To play back a tape, the television must be NTSC compatible.
(see page 114)
✤
We recommend that you use the AC Power adapter as the power source for the Camcorder.
✤
✤
A/V
Connecting to a TV which has
S-Video input Video input-Yellow
Audio/Video Input Jacks
Audio input
(left)-White
TV
1. Connect the Camcorder to your TV with the
Audio/Video cable.
■
■
■
The yellow jack: Video
The white jack: Audio(L)-mono
The red jack: Audio(R) If you connect to a monaural TV, connect the yellow jack
(Video) to the video input of the TV and the white jack
(Audio L) to the audio input of the TV.
2. Set the Power switch to PLAYER .
Audio input
(right)-Red
Audio/Video
3. Set the Mode switch to TAPE . (SC-D353/D354/D355 only)
4. Turn on the TV and set the TV/VIDEO selector on the TV to Video.
Refer to the TV user’s manual.
5. Play the tape.
S-Video
2.
3.
4.
5.
Mode
Camcorder
[ Notes ]
■ You may use an S-Video (optional) cable to obtain better quality pictures if you have a S-Video connector on your TV.
■ Even if you use an S-Video (optional) cable, you need to connect an audio cable.
■ If you connect the cable to the Audio/Video jack, you will not hear sound from the Camcorder's speakers.
■ If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
■
■
■
■
S
S-Video (
A/V ,
,
,
)
1.
,
)
A/V
■
■
■
-
:Video(
:Audio(L)[
:Audio(R)[
,
Video(
Audio[ ]
) ,
)
PLAYER(
TAPE( ) (
TV/VIDEO(
)
S-Video ,
, NTSC ( 114 )
A/V
]-
]
/
SC-D353/D354/D355)
) VIDEO
:Audio(L)[ ]
ENGLISH
Playback
Connecting to a TV which has no Audio and Video Input Jacks
✤ You can connect your Camcorder to a TV through a VCR.
✤
1. Connect the Camcorder to your VCR with the Audio/Video cable.
■
■
■
The yellow jack: Video
The white jack: Audio(L) - Mono
The red jack: Audio(R)
2. Connect a TV to the VCR.
VCR
S-Video input
3. Set the Power switch to PLAYER .
4. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
TV
5. Turn on both the TV and VCR.
■ Set the input selector on the VCR to Antenna
Line.
■ Select the channel reserved for your VCR on the TV set.
6. Play the tape.
Playback
✤
You can play the recorded tape in Player mode.
1. Connect a power source and set the Power switch to PLAYER .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. Insert the tape you wish to play back.
4. Using the / (REW/FF) buttons, find the first position you wish to play back.
5. Press the
■
(PLAY/STILL) button.
The images you recorded will appear on the TV after a few seconds.
■ If a tape reaches its end while being played back, the tape will rewind automatically.
Video input-Yellow
Audio input
(left)-White
Audio input
(right)-Red
Audio/Video
S-Video
5.
■
■
[ Notes ]
■
■
The playback mode (SP/LP) is selected automatically.
If the VCR has an S-Video input terminal, you may use S-Video for better quality.
■ The S-Video terminal transmits video only. Connect audio cables for sound.
■ If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
■
■
■
■
Camcorder
✤
1.
2.
3.
4.
(
1.
A/V A/V
■
■
■
:Video(
:Audio(L)[
:Audio(R)[
)
2.
3.
4.
Mode
5.
(
PLAYER(
TAPE(
SC-D353/D354/D355)
.
■
■
6.
)
]-
]
)
LINE
Mode
(PLAY/STILL(
,
SP LP
S
S-Video (
,
,
,
)
Player(
,
A/V
(REW(
/
)
TAPE(
SC-D353/D354/D355)
))
))
S-Video ,
.
PLAYER(
(FF(
:Audio(L)[
)
))
]
)
ENGLISH
Playback
Various Functions while in Player Mode
✤ This function works only in Player mode.
✤
The PLAY, STILL, STOP, FF, REW buttons are located on the
Camcorder and the remote control. (SC-D354/D355 only)
✤
The F.ADV(Frame advance), X2, SLOW buttons are located on the remote control only. (SC-D354/D355 only)
✤
To prevent tape and head-drum wear, your Camcorder will automatically stop if it is left in still or slow modes for more than
3 minutes.
Playback Pause
■
■
Press the playback.
(PLAY/STILL) button during
To resume playback, press the button.
(PLAY/STILL)
Player ( )
✤
✤
✤
REW(
( )
✤
Player(
)
(
Picture Search (Forward/Reverse)
■
■
Press the / (REW/FF) buttons during playback or still mode.
To resume normal playback, press the
(PLAY/STILL) button.
Keep pressing / (REW/FF) buttons during playback or still mode.
To resume normal playback, release the button.
œ
œ
Slow Playback (Forward/Reverse)
(SC-D354/D355 only)
œ
■
Forward Slow playback
Press the SLOW button on the remote control
<SC-D354/D355 only>
during playback.
To resume normal playback, press the (PLAY/STILL) button.
■
Reverse Slow Playback
Press the (-) button during forward slow play back.
■
-
- To resume forward slow playback, press the (+) button.
To resume normal playback, press the
(PLAY/STILL) button.
-
■
■
■
■
■
(
-
-
)
PLAY/STILL(
. (
/
SC-D354/D355)
:F.ADV(
),STOP(
),X2(
SC-D354/D355)
, 3
),FF(
),SLOW
),
(
,
,
(
/
/
/
,
))
,
) (
))
(PLAY/STILL(
(-)
(+)
(PLAY/STILL(
(PLAY/STILL
SC-D354/D355)
,
SLOW( )
(PLAY/STILL
/ ))
/
(
.
Player( )
/ (REW(
/
Player(
))
)
/ (REW(
STILL (
))/ (FF(
STILL (
)) (FF(
) ,
))
(PLAY/STILL
)
))
,
))
ENGLISH
Playback
■
■
Frame Advance (To play back frame by frame) (SC-D354/D355 only)
Press the still mode.
F.ADV
button on the remote control while in
- Video sequence advances frame by frame each time you press the F.ADV
button.
- The F.ADV function works in still mode only.
To resume normal playback, press the
(PLAY/STILL) button.
- Forward frame advance
Press the F.ADV
button on the remote control in still mode.
- Reverse frame advance
Press the (-) button on the remote control to change the direction in F.ADV mode.
Press the F.ADV
button on the remote control.
œ
œ
<SC-D354/D355 only>
(
X2 Playback (Forward/Reverse) (SC-D354/D355 only)
■
■
Forward X2 playback
- Press the X2 button on the remote control during playback.
- To resume normal playback, press the button.
Reverse X2 playback
(PLAY/STILL)
- Press the (-) button during forward X2 playback.
- To resume normal playback, press the (PLAY/STILL) button.
Reverse Playback (SC-D354/D355 only)
X2
■
■
-
-
-
-
(
X2
X2
X2
/
■
■
SC-D354/D355)
-
-
-
-
(
-
) ( still( still(
F.ADV(
)
) still(
F.ADV(
)
,
F.ADV(
,
)
)
)
,
SC-D354/D355)
,
,
)
( - )
(PLAY/STILL(
F.ADV
(PLAY/STILL(
,
F.ADV(
X2
(PLAY/STILL(
/
/
)
))
))
■
■
To playback in reverse at normal speed, press the (-) button during normal forward playback.
Press the (PLAY/STILL) or (+) button to return to normal forward playback.
■
■
( SC-D354/D355)
(PLAY/STILL( /
,
)) (+) ,
(-)
[ Notes ]
■ Mosaic shaped distortion may appear on the screen while in some of the various playback modes.
Mosaic shaped distortion or noise may be experienced when you
■ play back tapes recorded in LP which contain various playback functions.
Sound will only be heard during normal SP or LP playback.
■
■
LP(
SP(
)
,
) LP( ) ,
/
( - )
))
ENGLISH
Playback
Zooming during Playback (PB ZOOM)
✤ The Playback Zoom function works in Player mode.
✤ The Playback Zoom function enables you to magnify the playback or still image.
1. Set the Power switch to PLAYER .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3
3. Press the PB ZOOM button in playback mode or in still mode.
4. The image is magnified starting from the center of image.
5. You can zoom in from 1.2x
to 8.0x
by moving the
Zoom lever.
■ Zoom ratio is not displayed on the screen.
6. To cancel the playback Zoom function, press the
PB ZOOM or (STOP)
5
PB ZOOM (
✤ Player
✤
PB ZOOM( )
,
)
1.
PLAYER(
2.
Mode
(
TAPE(
SC-D353/D354/D355)
3.
4.
PLAYER
PB ZOOM(
STILL(
)
)
)
)
5.
8.0x
■
6.
(
1.2x
PB ZOOM(
) (STOP(
),
))
PB ZOOM
■
■
[ Notes ]
■
■
The PB ZOOM function enlarges the center of the screen only.
You cannot apply the Playback Zoom function to pictures which are being input from an external video source.
■ The Playback Zoom image cannot be imported to your PC from the Camcorder’s DV jack.
The PB ZOOM images cannot be exported to a PC.
OSD will not be displayed on the LCD screen while the PB ZOOM function is being operated.
To display OSD, press the PB ZOOM button once to stop operating
PB ZOOM function, or press the (STOP) button to stop playback.
■
■
■
■
■
PB ZOOM(
PB ZOOM(
PB ZOOM(
)
DV
)
,
) ,
,
PB ZOOM (STOP( ))
ENGLISH
Playback
AV In/Out (SC-D355 only)
AV In/Out (AV
✤ AV In/Out function works only in Player mode.
✤
AV in/out setting enables you to record signal from external sources and display it on LCD screen.
Also, you can direct your video or image to external devices to record or play back.
✤ AV
✤ AV /
/
1. Connect the Camcorder to your VCR or TV with the
Audio/Video cable. (See pages 71~72)
2. Set the Mode switch to TAPE .
3. Set the Power switch to PLAYER .
4. Turn on the VCR or TV.
5. Insert the blank tape with protection tab closed into the Camcorder.
■ If you want to record from a connected VCR, insert a recorded VHS tape into the VCR.
6. Press the MENU button.
■ The menu list will appear.
7. Move the Menu selector to the left or right to 7 select Record , then press the Menu selector .
8. Move the Menu selector to the left or right to select
AV In/Out , then press the Menu selector .
9. Move the Menu selector to the left or right to select
In , then press the Menu selector .
■ If you want to see the Camcorder picture with a
TV, set AV In/Out menu to Out.
10. To exit, press the MENU button.
11. Press the Start/Stop button to set the
9
Camcorder to REC PAUSE mode.
■ PAUSE appears on the LCD screen.
12. Select the TV program or playback the VHS tape.
13. Press the Start/Stop button to start recording.
■ If you want to pause recording for a while, press the Start/Stop button again.
1
Player Mode
√ Record
Rec Mode
Audio Mode
Wind Cut
AV In/Out
Move
Player Mode
Back
Rec Mode
Audio Mode
Wind Cut
AV In/Out
14. To stop recording, press the (STOP) button.
Move
[ Note ]
When you record the images being played back on an analog VCR, if they are not being played back at normal speed, (for example, more than double speed or slow playback), only a gray image appears on the Camcorder.
Select
Select
14.
√ SP
√ 12Bit
√ Off
√ Out
Out
In
MENU Exit
MENU Exit
VHS
( 2
/ ) ( SC-D355)
Player
1.
A/V
2.
Mode
3.
4.
5.
DV
■
VHS
6.
MENU(
■
7.
)
Menu selector(
Record ,
VHS
Menu selector(
( 71~72 )
8.
9.
10.
11.
12.
13.
,
Out ,
Menu selector(
Menu selector(
Menu selector(
Menu selector( )
■
Out AV In/Out
, MENU(
Start/Stop(
PAUSE(
■ "PAUSE"
)
)
)
Start/Stop(
VHS
)
■ ,
,
,
,
)
)
Start/Stop
( /
(STOP(
)
))
) ,
,
TAPE(
PLAYER(
,
)
)
)
,
,
)
)
AV In/
In
REC
ENGLISH
Playback
Audio Dubbing (SC-D354/D355 only)
✤ The Audio Dubbing function works only in Player Mode.
✤
You can not dub sound on a pre-recorded tape in LP or 16 bit mode.
✤ You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound.
✤ Use the internal or an external microphone(not supplied) or other audio equipment.
✤
The original sound will not be erased.
Dubbing Sound
1. Set the Power switch to PLAYER .
■ If you want to use an external microphone, connect the microphone to the external MIC input jack on the
Camcorder.
2. Set the Mode switch to TAPE .
3. Press the (PLAY/STILL) button and find the timeframe of the scene to be dubbed.
1
4. Press the (PLAY/STILL) button to pause the scene.
3 4
5. Press the A.DUB
button on the remote control.
■ Audio Dubbing icon ( ) will be
■ displayed on the LCD screen.
The Camcorder is ready for dubbing.
6. Press the (PLAY/STILL) button to start dubbing.
■ Press the (STOP) button to stop the dubbing.
DV
USB
MIC
AV
[ Notes ]
■ You can not use the Audio Dubbing function while playing a write
■ protected video tape.
To utilize an external MIC or sound source, connect a microphone to the MIC jack or use the AV cable to connect external sound source input.
■ To dub an external sound source, set the AV In/Out function to In
(SC-D355 only). (see page 76).
Audio dubbing (
✤
✤
✤
✤
✤
(
Player
LP
)
5
√
16
1.
■
) ( SC-D354/D355)
Audio dubbing (
2.
Mode
3.
TAPE(
(PLAY/STILL( /
4.
5.
■
■
6.
■
(
,
)
PLAYER(
,
(PLAY/STILL(
12
))
)
/
/
A.DUB(
A.DUB( )
(PLAY/STILL(
■
■
■
(
Audio/Video(
,
External MIC(
/ )
,
MIC)
AV In/Out
SC-D355) ( 76 )
(STOP(
,
In(
,
SP
)
))
))
)
)
))
)
,
ENGLISH
Playback
Dubbed Audio Playback
1. Set the Power switch to PLAYER .
4
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. Insert the dubbed tape and press the MENU button.
4. Move the Menu selector to the left or right to select Tape , then press the Menu selector .
6
5. Move the Menu selector to the left or right to select Audio Select , then press the Menu selector .
6. Move the Menu selector to the left or right to select the audio playback channel, then press the
Menu selector .
■
■
■
Sound[1]: play the original sound.
Sound[2]: play the dubbed sound.
MIX[1+2]: play back sound1 and 2 equality mixed.
7
7. To exit, press the MENU button.
8. Press the dubbed tape.
(PLAY/STILL) button to playback the
Player Mode
√ Tape
Photo Search
Photo Copy
Audio Select √ Sound[1]
1.
PLAYER(
2.
Mode
(
TAPE(
SC-D353/D354/D355)
3.
,
)
)
MENU( )
Move Select MENU Exit
Player Mode
Back
Photo Search
Photo Copy
Audio Select
Move
Sound[1]
Sound[2]
MIX[1+2]
Select MENU Exit
4.
5.
(
Tape ,
Menu selector(
)
Menu selector(
Menu selector(
Audio Select , Menu selector
)
Sound[2]
√
8.
SP 0:01:53:10
20min
6.
■
■
■
,
Menu selector(
Menu selector(
Sound [1] (
Sound [2] (
MIX[1+2] (
1):
2):
1+2):
7.
, MENU( )
(PLAY/STILL( / ))
)
)
)
)
1 2
[ Note ]
When you playback added sound (Sound[2] or MIX[1+2] mode), you may experience a loss of sound quality.
(Sound [2] MIX[1+2] ),
ENGLISH
IEEE 1394 Data Transfer IEEE 1394
Transferring IEEE1394 (i.LINK)-DV Standard Data Connections
Connecting to a DV Device (DVD Recorder, Camcorder, etc.)
■
■
Connecting to other DV standard products.
A standard DV connection is quite simple.
If a product has a DV port, you can transfer data by connecting to the DV port using the correct cable.
!!! Please be careful since there are two types of DV ports, (4pin,
6pin). This Camcorder has a 4pin terminal.
With a digital connection, video and audio signals are transmitted in digital format, allowing high quality images to be transferred.
Connecting to a PC
■
■
If you want to transmit data to a PC, you must install an IEEE 1394 add-on card into the PC. (not supplied)
The frame rate for video capture is dependent on the capacity of the PC.
■
■
DV
■
■ DV
■
!!!
IEEE 1394(i.LINK)-DV
DV
,
,
DV
DV
,
,
(4
DV
,6
,
).
,
4
IEEE1394 (
■
■
■
[ Notes ]
■ When you transmit data from the Camcorder to another DV device, some functions may not work.
If this occurs, please reconnect the DV cable or turn the power
■
■
■
OFF and ON again.
When you transmit data from the Camcorder to PC, PC function button is not available in M.Player mode.
Do not use the Camcorder and IEEE1394 together as this will cause IEEE1394 to shut off.
Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.
■ Operation is not guaranteed for all computer environments recommended above.
The IEEE1394 cable (DV cable)is sold separately.
Video Capture software is commercially available.
Most DV enabled PCs have a 6 pin socket. In this case, a 6pin/4pin
■
■
■ cable is required for the connection.
Most DV enabled Notebooks and Laptops have a 4 pin socket.
Use a 4pin/4pin cable for the connection.
DIS and COLOR NITE SHUTTER are not available when in DV
(IEEE1394) mode.
If DV (IEEE1394) mode is set, DIS and COLOR NITE SHUTTER modes will be released.
■
■
DV ,
■
■
■
■
■
IEEE 1394
DV
,
DV
■
■
IEEE 1394
IEEE 1394
IEEE 1394
,
(DV )
6PIN ,
DV
,
, M.Player
USB
6PIN/4PIN
4PIN ,
■
■
DIS COLOR NITE SHUTTER
DV(IEEE1394)
DV(IEEE1394) , DIS
SHUTTER
,
,
.
4PIN/4PIN
COLOR NITE
)
ENGLISH
IEEE 1394 Data Transfer
■
■
■
■
System Requirements
CPU: faster Intel ® Pentium III™ 450MHz compatible.
Operating system: Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
Main memory: more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV Connection Cable
1. Set the Power switch to PLAYER .
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
3. Connect the DV cable (not supplied) from the DV jack of the Camcorder to the DV jack of the other DV device.
■ Make sure that is displayed on the LCD screen.
4. Press the Start/Stop button to begin
REC PAUSE mode.
■ PAUSE is displayed on the LCD screen.
5. Start playback on the other DV device while you monitor the picture.
6. Press the Start/Stop button to start recording.
■ If you want to pause recording momentarily, press the
Start/Stop button again.
7. To stop recording, press the (STOP) button.
IEEE 1394
■
■
■
■
CPU:Intel ® Pentium III TM 450Mhz .
:
:Windows ® 98SE, ME, XP, Mac OS(9.1~10.2)
64MB RAM
IEEE 1394
DV
DV
USB
AV
MIC
DV
USB
AV
MIC
1.
PLAYER
(
3.
DV
)
2.
Mode
(
TAPE(
SC-D353/D354/D355)
( )
DV
DV
DV
)
/
■
) REC PAUSE( )
/
4.
Start/Stop(
■ PAUSE(
5.
6.
■
Start/Stop(
)
7.
,
/
, DV
/
,
)
(STOP(
Start/Stop(
))
/ )
[ Notes ]
■ When using this Camcorder as a recorder, the pictures that appear on a monitor may seem uneven, however recorded pictures will not
■ be affected.
Operation is not guaranteed for all the recommended computer
■ environments mentioned above.
While transmitting data from the Camcorder to PC at strong electric field and strong magnetic field, VIDEO signal or AUDIO signal may transmit with noise.
■
■
■ video audio
,
(PC),
,
ENGLISH USB Interface
(SC-D352/D353/D354/D355 only) (
USB
SC-D352/D353/D354/D355)
Transferring a Digital Image through a USB Connection
✤
The camcorder supports both USB 1.1 and 2.0 standards.
(Depends on the PC specification)
✤
You can easily transfer a image from a Memory card to a PC without additional add-on cards via a USB connection.
✤
You can transfer a recorded file in memory card to a PC via a USB connection. (SC-D353/D354/D355 only)
✤
If you transfer data to a PC, you need to install the software (DV Driver,
Video Codec, DirectX 9.0) supplied with the Camcorder.
USB Connection speed depending on the System
High speed USB connection is supported by Microsoft (Windows) device drivers only.
■
■
■
Windows 98SE/ME - Full Speed USB
Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
Windows XP - High speed USB on a system with Service Pack 1 or later installed.
System Requirements
Minimum
CPU
OS (operating system)
Intel ® Pentium III™, 600MHz
Windows ® 98SE/ME
Memory
HDD capacity
Resolution
128MB
1GB or more
1024 x 768 dots
USB
24bit Color
USB 1.1
Windows System
Recommended
Intel ®
512MB
Pentium 4™ , 2GHz
Windows ® 2000/XP
2GB or more
1024 x 768 dots
24bit Color
USB 2.0 High Speed
■ It is not available for Macintosh systems.
■
■
■
■
■
■
[ Notes ]
■
■
USB 2.0 works only for removable disk functions.
On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time.
■ On a slower PC than recommended, movie playback may skip frames or operate unexpectedly.
Intel ® Pentium III™ or Pentium 4™ is a trademark of the Intel Corporation.
Windows ® is a registered trademark of the Microsoft mentioned above.
® Corporation.
All other brands and names are property of their respective owners.
Operations are not guaranteed for all of the recommended computer environments
■ Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.
■ In M.Cam or M.Player mode, be sure that the Memory card is inserted into
Camcorder before connecting USB cable. If no Memory card or an unformatted
Memory card is inserted, PC will not recognize your Camcorder as a removable disk. (SC-D353/D354/D355 only)
USB Streaming requires Video Codec, DV Driver and DirectX 9.0.
If you disconnect the USB cable from the PC or the Camcorder during the data
■ transfer, the data transfer will stop and the data may be damaged.
If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work properly. If this occurs, remove all other USB devices and try the connection again.
CPU
USB
■
USB
✤
✤
USB ,
USB 1.1
USB2.0
✤
(
✤
(
USB
)
USB ,
SC-D353/D354/D355)
, USB
USB
USB
■
■
■
Microsoft(windows)
Windows 98SE/ME-
Windows 2000-Service Pack4
Windows XP-Service Pack1
,
Intel ® Pentium III™, 600MHz
Windows ® 98SE/ME
128MB
USB 1.1
Macintosh
(
DirectX 9.0
Intel ® Pentium 4™ , 2GHz
Windows ® 2000/XP
512MB
■
■
■
■
■
■
■
■
■
■
■
■
USB2.0
Intel ® Pentium II TM Pentium 4
Windows ® Micorsoft ®
M.Cam(
,
IEEE 1394
,
,
TM
) M.Player(
Intel
USB
USB
USB HUB
,
)
( SC-D353/D354/D355)
Video Codec, DV
USB
DirectX9.0
,
,
,
,
,
USB
USB
,
,
,
)
ENGLISH USB Interface
(SC-D352/D353/D354/D355 only)
Selecting the USB Device (SC-D353/D354/D355 only)
✤
USB Connect function works only in M.Player mode.
✤
Using the USB cable, you can connect your Camcorder to a computer to copy your movies and images from the Memory card
(or built-in memory; SC-D354/D355), or to a printer to print your images.
1
1. Set the Power switch to PLAYER .
2. Set the Mode switch to MEMORY CARD .
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select System , then press the Menu selector .
5. Move the Menu selector to the left or right to select USB Connect , then press the Menu selector .
4
6. Move the Menu selector to the left or right to select Computer or Printer , then press the
Menu selector .
■ You can select Computer to use the
Camcorder as a PC Camera, USB Stream or removable disk.
■ You can select Printer to use the Pictbridge feature (see page 110).
5
7. To exit, press the MENU button.
(
USB
SC-D352/D353/D354/D355)
USB (
✤
USB
✤ USB ,
SC-D354/D355)
SC-D353/D354/D355)
M.Player
,
M.Player Mode
√ System
Clock Set
Remote
Beep Sound
USB Version
USB Connect
Language
Move
√ On
√ On
√ USB 1.1
√ Computer
√ English
Select MENU Exit
M.Player Mode
Back
Clock Set
Remote
Beep Sound
USB Version
USB Connect
Language
Move Select
Computer
Printer
MENU Exit
1.
2.
Mode
3.
■
MENU(
4.
System ,
Menu selector(
Menu selector(
5.
(
Menu selector(
USB Connect ,
)
Menu selector
)
6.
Menu selector(
Computer( ) Printer(
Menu selector(
■ Computer( )
)
PC
) ,
)
■ Printer(
( 110 )
)
PLAYER(
(
,
MEMORY CARD(
) Pictbridge
)
)
)
)
,USB
7.
, MENU( )
ENGLISH USB Interface
(SC-D352/D353/D354/D355 only) (
USB
SC-D352/D353/D354/D355)
Setting the USB Communication Speed (SC-D353/D354/D355 only)
✤
To ensure proper communication between the camcorder and a
PC, please set the USB Version before connecting the camcorder to a PC.
✤ It is available only in M.Cam and M.Player modes only.
✤
✤
USB
USB
( SC-D353/D354/D355)
,
M.Cam M.Player
1. Set the Power switch to CAMERA or PLAYER .
1
1.
PLAYER(
CAMERA(
)
)
2. Set the Mode switch to MEMORY CARD .
2.
Mode MEMORY CARD( )
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select System , then press the Menu selector .
3.
■
MENU( )
4.
System ,
Menu selector(
Menu selector(
)
5. Move the Menu selector to the left or right to select USB Version , then press the Menu selector .
4
5
M.Player Mode
√ System
Clock Set
6. Move the Menu selector to the left or right to select USB 1.1
or USB 2.0
, then press the
Menu selector .
■ Set the USB Version to USB 2.0 when it is
■ supported by both PC and its OS (Operating
System).
If either the PC or OS does not support
USB 2.0, set the USB Version to USB 1.1.
Remote
Beep Sound
USB Version
USB Connect
Language
Move
Clock Set
Remote
√ On
√ On
√ USB 1.1
√ Computer
√ English
Select
M.Player Mode
Back
MENU Exit
7. To exit, press the MENU button.
specifications.
In this case, choose the USB1.1 for USB connection.
When selected USB 2.0 is not supported by the PC, the USB1.1
will be used for the USB connection automatically.
Beep Sound
USB Version
USB Connect
Language
[ Notes ]
■ When the USB Version is not set properly, the USB connection may not be established.
■
Move
USB 2.0 may not be supported by certain PCs depending on their
■
Select
■
■
■
USB 1.1
USB 2.0
MENU Exit
USB
5.
(
Menu selector(
USB Version , Menu selector
)
)
6.
(
■
Menu selector(
USB1.1 USB2.0
,
)
USB2.0
■
USB2.0 ,
Menu selector
USB1.1
,
)
USB2.0 ,
7.
USB2.0,
, MENU(
USB2.0.
,
,USB
,
)
USB1.1
USB1.1
)
ENGLISH USB Interface
(SC-D352/D353/D354/D355 only) (
USB
SC-D352/D353/D354/D355)
Installing DV Media Pro 1.0 Program
✤ To play back MPEG moving pictures recorded by the camcorder or streaming data transferred through the USB connection on a PC, the
Video Codec program should be installed.
✤
Do not connect the Camcorder to PC before installing the program.
✤ If another Camcorder or scanner is connected, please disconnect it in advance.
✤ This explanation is based on Windows ® 98SE OS.
✤
DV Media Pro User's Manual is included on the accompanying CD(D:\ help\) in Adobe's Portable Document Format(PDF) The user's manual can be viewed using Acrobat Reader software, which is also included on the CD D\Support\AcrobatReader\AcroReader51_ENU_ full.exe).
(The Acrobat Reader is a freeware product of AdobeSystems,Inc.)
✤
DV Media Pro User’s Manual is in English.
Program Installation 3
1. Insert the software CD into the CD-ROM drive of your computer. Installation selection screen appears on the monitor.
2. If the installation selection screen does not appear after inserting the CD, click “Run” in the Windows
“Start” menu and execute Autorun.exe file to begin installation. When CD-ROM drive is set to “D:drive”, type “D:\autorun.exe” and press Enter.
3. Click the icons listed below to install the selected software.
■ DV Driver Click
- USB removable Disk Driver (Windows ® 98SE only)
- USB PC CAMERA & STREAMING Driver (CAPTURE DRIVER)
- Connect a Camcorder to your PC to complete the DV Driver installation.
1) Set the camcorder Power switch to CAMERA.
2) Set the camcorder Mode switch to TAPE.
(SC-D353/D354/D355 only)
3) Connect the camcorder to the PC using the USB cable.
4) The SAMSUNG A/V Capture driver installation begins on the
PC.
■ DirectX 9.0 Click
■ Video Codec Click
The Video Codec needs to be installed in order to playback the
MPEG4 Movies (stored in the Memory Card) on a PC or to use the
USB Streaming/PC Camera functions.
DVC Media PRO 1.0
✤
MPEG
✤
✤
Video Codec
,
✤ Windows 98SE
✤
DVC Media Pro
(D:\help\)
USB
,
Adobe'
Acrobat Reader
(D:\Support\AcrobatReader\AcroReader51_ENU_ full.exe)
(Acrobat Reader
✤ DVC Media Pro
Adobe System , Inc.
1.
CD-ROM
,
(PDF)
,
2.
Autorun.exe
, " " ➔
➔
2) Mode
(
TAPE(
SC-D353/D354/D355)
3) USB
4)
■ DirectX 9.0
AV
■ Video Codec
Video Codec
USB /USB PC
D , "D:\
Autorun.exe"
3.
■
DV Driver:
- USB
- USB PC CAMERA
-
1)
(
(
Enter
CAMERA(
Windows 98SE)
)
)
MPEG4
)
)
ENGLISH USB Interface
(SC-D352/D353/D354/D355 only) (
USB
SC-D352/D353/D354/D355)
Using the PC Camera Function
✤
To use the PC Camera function, the DV Driver, Video Codec and
DirectX 9.0. programs must be installed in the PC.
✤
You can use this Camcorder as a PC CAMERA.
✤ When you connect to a Web site that provides video chatting functions, you can use your Camcorder for such functions.
✤ When using this camcorder for video conferencing (such as
NetMeeting), voice communication may not be supported depending on the video conferencing software. In this case, connect an external microphone to the soundcard of the PC to enable voice communication.
✤ Using the Camcorder with PC Net-meeting program installed, you can participate in video conference.
✤ The PC CAMERA's screen size (Transferred video frame rate for the PC Camera function is max 15 fps.)
■ 320X240 (QVGA) pixels for USB 1.1 connection.
✤
If PC is connected with the USB to the Camcorder, only the Power,
Mode, Zoom and NITE PIX switches can be operated.
(SC-D352/D354/D355 only)
1. Set the Power switch to CAMERA .
1
✤
✤
✤
✤
PC
PC
DirectX 9.0
PC
DV driver, Video Codec,
PC
,
✤ Net-Meeting
✤
PC
■
✤
USB 1.1
USB
,NITE PIX
(
.
15 / )
320X240 (QVGA)
(
, ,Mode ,ZOOM
SC-D352/D354/D355)
,
1.
CAMERA( )
2. Set the Mode switch to TAPE .
(SC-D353/D354/D355 only)
2.
Mode
(
TAPE(
SC-D353/D354/D355)
)
3. Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB connector on your computer.
3.
USB
USB
USB ,
2
ENGLISH USB Interface
(SC-D352/D353/D354/D355 only) (
USB
SC-D352/D353/D354/D355)
Using the USB Streaming Function
✤
To use USB streaming, the DV Driver, Video Codec and DirectX 9.0. programs must be installed in the PC.
✤
You can view Camcorder video on your PC using USB streaming.
✤
You can also store it as a moving picture in the "avi" file format, or as a still image in the "jpg" file format on a PC.
1.
Set the Mode switch to TAPE (SC-D353/D354/D355 only), set the Power switch to
CAMERA or PLAYER .
2.
Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB port on your computer.
3.
Setup and execute Windows Movie Maker or the Ulead VIDEO Studio Software application provided on the CD.
- For detailed instructions for Ulead VIDEO Studio use, refer to the program’s
Help function.
- Windows Movie Maker is used for WINDOWS ME and XP users. (C:\program files\Movie maker\moviemk.exe)
Using the removable Disk Function (SC-D353/D354/D355 only)
✤
You can easily transfer data from a Memory card to a PC without additional add-on cards via a USB connection.
1.
Set the Mode switch to MEMORY CARD , set the Power switch to CAMERA or
PLAYER .
2.
Connect one end of the USB cable to the USB jack on the Camcorder and the other end to the USB port on your computer.
3 To verify whether the removable disk has been properly recognized, open
Windows Explorer and locate the removable disk.
Connecting to a PC
1.
Connect a USB cable to the USB port on the PC.
■ If a USB cable is connected to the Camcorder's USB port, nothing is displayed on a TV.
2.
Connect the other end of the USB cable into the USB jack on the Camcorder.
(USB jack)
■ If a PC is connected to the Camcorder with a USB cable only, Zoom switch and NITE PIX (SC-D352/D354/D355 only) operate.
Disconnecting the USB Cable
✤
After completing the data transmission, you must disconnect the cable in the following way:
1.
Select the removable disc icon and click the right mouse button to select [Eject].
2.
Select [Confirm] and disconnect the USB cable when the Windows Splash screen appears.
[ Notes ]
■ If you disconnect the USB cable from the PC or the
Camcorder while transferring, the data transmission will stop and the data may be damaged.
■ If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB devices, the Camcorder may not work
■ properly. If this occurs, remove all USB devices from the PC and reconnect the
Camcorder.
While transmitting data from the Camcorder to PC at strong electric field and strong magnetic field, VIDEO signal or AUDIO signal may transmit with noise.
1.
2.
■
■
USB
USB
USB
■
USB Cable
DV
USB
AV
MIC audio
✤
✤
✤
USB
USB
"avi"
DV Driver, Video Codec, DirectX 9.0
, "jpg"
1.
2.
3.
✤
Mode TAPE(
CAMERA(
) ( SC-D353/D354/D355)
) PLAYER( )
, USB USB USB
Ulead VIDEO Studio
-
- Windows Movie Maker
HELP
WINDOWS ME XP.(C:\program files\Movie maker\moviemk.exe)
( SC-D353/D354/D355)
USB ,
1.
2.
3.
Mode
USB
MEMORY CARD(
CAMERA(
USB
,
)
) PLAYER(
,
)
USB
DV
USB
AV
MIC
✤
1.
2.
■
■
USB
USB
USB
,
,Zoom NITE PIX(
USB
"
"
",
,
",
USB
(PC),
USB
,
USB
SC-D352/D354/D355)
,
,
USB
"
USB
USB HUB
USB video
,
"
,
,
:
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
Memory Stick (Optional Accessory)
✤ The Memory Stick stores and manages images recorded by the Camcorder.
■
■
■
■
■
■
Memory Stick Functions
Recording still images and MPEG4 movies
Viewing still images and MPEG4 movies
- Single
- Slide show (Still images only)
- Multi display (Still images only)
Protecting images against accidental erasure
Deleting images recorded on a Memory Stick
Print marking still images
Formatting a Memory Stick
[ Notes ]
■ You can use most of the Camcorder’s functions when recording to
■ the Memory Stick.
appears on the screen while recording to the Memory
■
Stick.
While recording or loading an image, do not eject or insert the
Memory Stick.
Inserting or ejecting a Memory Stick while recording or loading an
■ image can cause data damage.
If you want to save all images on the Memory Stick, set the write protect tab on the Memory Stick to LOCK.
( SC-D353/D354/D355)
■
■
■
Memory Stick
✤
Terminal
Protection tab
■
■
-
-
-
■
( )
(
(
MPEG4
MPEG4
)
)
■
■
■
■
-
LOCK
,
" "
,
■
■
TM
“Memory Stick” and are trademarks of Sony Corporation.
All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies.
Furthermore, “™” and “ ® ” are not mentioned in each case in this manual.
■
■
TM
"Memory stick" SONY
TM
" TM " " ® "
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only) ( SC-D353/D354/D355)
Inserting and Ejecting the Memory Card
Inserting the Memory card
1. Set the Power switch to Off .
2. Open the Memory card cover.
3. Insert the Memory card in the direction of the arrow into the Memory card slot located on the bottom of the Camcorder.
■
■
Ejecting the Memory card
1. Set the Power switch to Off .
2. Open the Memory card cover.
3. Push the Memory card, then it comes out of the Camcorder automatically.
4. Pull out the Memory card.
Do not attempt to pull the Memory card out without first pushing it in.
SC-D353/D354 only
Memory Stick
Memory Stick PRO
SC-D355 only
[ Notes ]
■ Memory Stick Duo type or RS-MMC
(SC-D355 only) should be inserted by using the Adaptor (not supplied).
■ If you set the Camcorder to M.Player mode, the last recorded still image appears.
■
If there are no recorded images on the
Memory card, No image!
will display on the screen.
While recording, loading, erasing or formatting, do not
■
Memory Stick
Memory Stick PRO
(Usable Memory card)
turn off the power or change the mode.
Please turn the power off before you insert or eject the Memory card. You could lose data on the Memory card.
SD/MMC
■
■
, ,
■
■
■
Do not allow metal substances to come in contact with the terminals of the Memory card.
Do not bend, drop or apply strong shock to Memory card.
After pulling the Memory card out from the Camcorder, please keep the Memory card in a soft case to prevent static shock.
The stored contents may be changed or lost as a result of misuse, static electricity, electric noise or repair. Save important images separately.
Samsung is not responsible for data loss due to misuse.
■
■
■
■
■
.
,
,
,
1.
2.
3.
4.
1.
2.
3.
,
■
■
(
Memory Stick DUO RS-MMC
SC-D355)
M.Player
,
(
, "No Image!"
)
,
,
,
,
Off
Off
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only) ( SC-D353/D354/D355)
Structure of Folders and Files on the Memory Card
✤ The still images that you recorded are saved in
JPEG file format on the Memory card.
✤ The moving images that you recorded are saved in MPEG4 file format on the Memory card.
✤ Each file has a file number and all files are assigned to a folder.
A file number from DCAM0001 is sequentially assigned to each recorded image.
Each folder is numbered from 100SSDVC and recorded on the Memory card.
Image Format
Still Image
■ Images are compressed in JPEG
(Joint Photographic Experts Group) format.
■ The picture size is 800x600
(Tape Capture 640x480).
DCIM
100 SSDVC
DCAM 0001
DCAM 0002
..
..
101SSDVC
<Still image>
MSAMSUNG
SSMOV
100SSMOV
Moving Image
■ Images are compressed in MPEG 4
■
(Moving Picture Experts Group) format.
The picture size is 720x480.
M.Cam mode (Memory record mode)
1. Set the Power switch to CAMERA .
2. Set the Mode switch to MEMORY CARD .
<Moving image>
Selecting the Camcorder Mode
✤
You can use this Camcorder as a Digital Still
Camera (DSC).
✤
You have to set the Mode switch to Memory card to use this
Camcorder as Digital Still Camera.
000-0000
File number
Folder number
M.Cam(
1.
2.
Mode
M.Player mode (Memory playback mode)
1. Set the Power switch to PLAYER .
2. Set the Mode switch to MEMORY CARD .
M.Player(
1.
2.
Mode
■
■
■
■
✤
✤
✤
✤
✤
-
-
JPEG
800X600,(
MPEG4
720X480
)
CAMERA(
MEMORY CARD(
)
)
PLAYER(
MEMORY CARD(
)
JPEG
MPEG4
)
)
DCAM0001
100SSDVC
640X480)
Memory Card( )
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
Selecting the Built-in Memory (SC-D354/D355 only)
✤ Built-in memory setting is available in the Player/M.Cam/M.Player
modes. (SC-D354: 32MB/SC-D355: 64MB)
✤
Images can be stored and played back using the built-in memory.
Hence, set the memory type before storing and playing back images.
1. Set the power switch to CAMERA or PLAYER .
2. Set the Mode switch to TAPE or MEMORY
CARD .
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Memory , then press the Menu selector .
5. Move the Menu selector to the left or right to select Memory Type , then press the Menu selector .
6. Move the Menu selector to the left or right to select Int. Memory or Memory card , then press the Menu selector .
7. To exit, press the MENU button.
4
6
Move
M.Cam Mode
Back
Memory Type
Photo Quality
File No.
Move
(
M.Cam Mode
√ Memory
Memory Type
Photo Quality
File No.
√ Int. Memory
√ Fine
√ Series
Select MENU Exit
Int. Memory
Memory card
Select MENU Exit
SC-D353/D354/D355)
( SC-D354/D355)
✤
✤
Player/M.Cam/M.Player
(SC-D354:32MB/SC-D355:64MB)
.
1.
2.
3.
4.
PLAYER(
Mode
MEMORY CARD(
MENU( )
■
CAMERA(
)
TAPE(
)
Memory ,
Menu selector(
Menu selector(
5.
Menu selector(
Memory Type( ) ,
)
6.
7.
)
)
Menu selector(
Menu selector(
, MENU( )
)
Memory(
Menu selector( )
) Memory card(
)
)
Using Quick Menu: Memory Type
1. Press the Menu selector .
2. Move the Menu selector to left or right to select
Memory Type , then press the Menu selector .
3. Move the Menu selector to the left or right to select
Int. Memory or Memory card , then press the
Menu selector .
4. To exit, press the MENU button.
Memory Type
White Balance
Photo Quality
Exposure
Manual Focus
MENU Exit
…
Int. Memory
On
†
46
2min
:
1.
2.
3.
4.
Menu selector( )
Menu selector(
Memory Type(
Menu selector( )
) ,
)
Menu selector(
Int. Memory(
Menu selector(
)
) Memory card(
)
, MENU( )
)
Int.
) ,
) ,
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only) ( SC-D353/D354/D355)
Selecting the Image Quality
✤ Photo Quality function works in Player/M.Cam modes.
✤
You can select the quality of a still images to be recorded.
Select the Image Quality
1. Set the Power switch to CAMERA or PLAYER .
2. If the Power switch is set to CAMERA mode, set the Mode switch to MEMORY CARD .
If the Power switch is set to PLAYER mode, set the Mode switch to TAPE .
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Memory , then press the Menu selector .
4
5. Move the Menu selector to the left or right to select
Photo Quality , then press the Menu selector .
6. Move the Menu selector to the left or right to select desired image quality ( Super Fine , Fine , Normal ), then press the Menu selector .
7. To exit, press the MENU button.
■ The selected icon will be displayed
Number of lmages on the Memory Card
2
M.Cam Mode
√ Memory
Photo Quality
File No.
Move
✤
√ Super Fine
√ Series
Select MENU Exit
7.
■
/M. Cam
✤
,
1.
2.
CAMERA( ) PLAYER
( )
MEMORY CARD(
CAMERA , Mode
)
PLAYER , Mode
TAPE ( )
3.
4.
MENU(
)
)
(
■
Memory(
Menu selector(
) ,
Menu selector(
)
Menu selector
) 5.
6.
Photo Quality(
Menu selector(
MENU(
) ),
)
) ,
)
Menu selector(
( Super Fine( ) , Fine(
Menu selector(
) ,
)
Normal(
)
QUALITY
Super Fine
Fine
Normal
8MB
Approx. 34
Approx. 45
Approx. 74
The actual number of images that you can record varies depending on the nature of the subject to be recorded.
5
16MB
Approx. 68
Approx. 90
Approx. 148
M.Cam Mode
Back
Photo Quality
File No.
[ Notes ]
■ The above approximation is based on a 8MB
Memory Stick under normal recording conditions.
■ The number of pictures that can be stored on a memory card depends on various conditions.
Move Select
Super Fine
Fine
Normal
MENU Exit
■
■
8MB
34
45
74
16MB
68
90
148
8MB Memory Stick
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
Using Quick Menu: Photo Quality
✤
Quick menu is used to access Camcorder functions by using the Menu selector.
✤ Quick menu provides easier access to frequently used menus without using the MENU button.
1
1. Press the Menu selector .
White Balance
Photo Quality
Exposure
Manual Focus
MENU Exit
Auto
(
2. Move the Menu selector to left or right to select Photo Quality , then press the Menu selector .
3
3. Move the Menu selector to the left or right to select desired image quality ( Super Fine , Fine ,
Normal ), then press the Menu selector .
White Balance
Photo Quality
Exposure
Manual Focus
MENU Exit
…
Super Fine
†
A
46
1min
SC-D353/D354/D355)
:
✤
✤
Menu selector(
,
,
MENU
46
1min
1.
Menu selector(
2.
Menu selector(
Photo Quality( ) ,
Menu selector( )
3.
Menu selector(
( Super Fine(
),
, Fine(
Menu selector(
)
)
),
)
, Normal(
)
4. To exit, press the MENU button.
4.
, MENU( )
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
Memory File Number
✤ File number setting works only in M.Cam mode.
✤ File numbers are given to images in the order they were recorded when they are stored on the Memory card.
✤
Memory file numbers may be set as follows:
■ Series: When there are existing files, the new image will be named as the next number in the sequence.
■ Reset: When there are no files stored on the Memory card, the file numbering starts from 0001.
( SC-D353/D354/D355)
✤
✤
✤
■
M.Cam
Series :
■ Reset :
,
:
,
,
1. Set the Power switch to the CAMERA .
2. Set the Mode switch to MEMORY CARD .
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Memory , then press the Menu selector .
5. Move the Menu selector to the left or right to select File No.
, then press the Menu selector .
4
6
6. Move the Menu selector to the left or right to select desired option( Series or Reset ), then press the Menu selector .
7. To exit, press the MENU button.
0001
M.Cam Mode
√ Memory
Photo Quality
File No.
√ Fine
√ Series
Move Select MENU Exit
M.Cam Mode
Back
Photo Quality
File No.
Series
Reset
Move Select MENU Exit
1.
2.
Mode
3.
■
MENU(
CAMERA
)
MEMORY CARD(
4.
(
Memory(
Menu selector(
) ,
)
Menu selector
)
5.
(
File No.(
Menu selector(
) ,
)
)
Menu selector
6.
Series
Menu selector(
Reset
Menu selector(
,
)
)
)
7.
, MENU( )
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
Taking Photos
✤ You may take still images while in M.Cam mode and store the images on the Memory card.
This function is useful when you want to take a snapshot of a subject while you are using the
Camcorder.
✤
You can take photos using the remote control.
(SC-D354/D355 only)
✤ Audio will not be recorded with a Still image on to the Memory Card.
1
3
1. Set the Power switch to CAMERA .
2. Set the Mode switch to MEMORY CARD .
3. After framing your object to record, fully press the
PHOTO button to take the picture.
■ The picture is taken and saved into the Memory card within a few seconds.
■ Taking another picture within this interval is not possible.
■ The indicator appears LCD screen during the time it takes to save the image.
[ Notes ]
■
■
Still images are saved in the Memory card in an 800x600 format.
The number of still images that can be stored depends on the quality of the image.
■
■
( SC-D353/D354/D355)
✤ M.Cam
✤
✤
( SC-D354/D355)
,
46
1min
1.
2.
Mode
3.
■
■
■
800X600
,
,
,
,
CAMERA
MEMORY CARD(
PHOTO
)
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only) ( SC-D353/D354/D355)
Viewing Still Images
✤ This function works only in M.Player mode. You can playback and view still images recorded on the Memory card.
✤
Be sure that the M.Play Select is set to Photo in the Menu.
✤
There are 3 ways to view recorded images.
Single: To view an image frame by frame.
Slide show: To view all images automatically and in consecutive order.
Multi display: To view 6 images at once.
To view a Single Image
1. Set the Power switch to PLAYER .
2. Set the Mode switch to MEMORY CARD .
■
■
The last recorded image appears.
If there are no recorded images on the
Memory card, No image! will display on the screen.
REV FWD
3. Using the / (REV/FWD) buttons, search for the desired still image.
■
■
■
To view the next image: press the (FWD) button.
To view the previous image: press the (REV) button.
Pressing (FWD) when you are on the last image will take you to the first image and pressing (REV) when you are on
■ the first image will take you to the last image.
Keep pressing (FWD) or (REV) to search for an image quickly.
To view a Slide Show
1. Set the Power switch to PLAYER .
2. Set the Mode switch to MEMORY CARD .
■ The last recorded image appears.
3. Press the
■
(S.SHOW) button.
■ The “Slide” will be display on the LCD screen.
4. To stop the slide show, press the (S.SHOW)
3
All images will be played back consecutively for
2~3 seconds each.
button again.
[ Notes ]
■
■
■
Loading time may vary depending on the image size.
The Slide Show will start from the current picture.
Any large sized image taken with another device will be displayed as a thumbnail image.
Slide
✤
✤
✤
-
-
-
S.SHOW
MULTI DISP.
3.
■
■
■
■
■
■
■
2/46
800x600
100-0002
.
M.Cam
:
:
1.
2.
3.
4.
1.
2.
M.Play Select
:
/ (REV(
(FWD(
■
■
■
:
(
■
■
))
Mode
)
"No Image!"
)/FWD( ))
:
:
,
,
(FWD(
(REV(
,
(FWD(
(REV(
))
))
))
))
Mode
6
))
PLAYER
MEMORY CARD
(REV(
Photo
PLAYER
MEMORY CARD(
(S.SHOW (
2~3
"Slide"
,
,
))
))
,
(S.SHOW(
)
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
To view the Multi Display
1. Set the Power switch to PLAYER .
100-0007
2. Set the Mode switch to MEMORY CARD .
■ The last recorded image appears.
œ
œœ √√
3. To view six stored images on single screen, press the ( MULTI DISP.) button.
■ A selection mark ( ) appears under
■ the image.
Press / (REV/FWD) button to select an image.
4. To return to single playback mode, press the
( MULTI DISP.) button again.
■ Selected picture is displayed in full screen mode.
REV FWD
( SC-D353/D354/D355)
7/25
√
1.
PLAYER
2.
■
Mode
3.
MEMORY CARD(
(MULTI DISP.(
■
■ /
))
(REV(
,
(
)/FWD(
)
))
)
6
S.SHOW
MULTI DISP.
4.
(
■
))
, (MULTI DISP.
[ Notes ]
■ To display the previous six images, press and hold the (REV)
■ button for about 3 seconds.
To display the next six images, press the (FWD) button for
■ about 3 seconds.
In order to use Delete, Protect or Print Mark functions in Multi
Display view mode, use the Quick Menu by pressing the Menu
Selector.
■
■
■
) ,
6
6 ,
,
Delete(
Menu selector(
(REV(
(FWD(
),Protect(
)
))
))
3
3
),Print Mark(
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only) (
Protection from accidental Erasure
✤
The protection function works only in M.Player mode.
✤
You can protect important images from accidental erasure.
If you execute format, all images including protected images will be erased.
✤
✤
1. Set the Power switch to PLAYER .
5
2. Set the Mode switch to MEMORY CARD .
■
■
The last recorded image appears.
If there are no recorded images on the Memory card, No image!
will display on the screen.
3. Using the / (REV/FWD) buttons, search for the still image that you want to protect.
4. Press the MENU button.
■ The menu list will appear.
5. Move the Menu selector to the left or right to select
Memory , then press the Menu selector .
7
6. Move the Menu selector to the left or right to select
Protect , then press the Menu selector .
7. Move the Menu selector to the left or right to select On , then press the Menu selector .
8. To exit, press the MENU button.
■ The protection ( ) icon will be displayed.
8
√
M.Player Mode
√ Memory
M.Play Select
Delete
Delete All
Protect
Print Mark
Format
Move
√
√
Select
Photo
Off
MENU Exit
[ Notes ]
■ Protected pictures will show the ( ) mark when they are displayed.
■ If the write protection tab on the Memory card is set to LOCK, you cannot set image protection.
M.Player Mode
Back
M.Play Select
Delete
Delete All
Protect
Print Mark
Format
Move Select
Off
On
MENU Exit
■
■
SC-D353/D354/D355)
2/46
800x600
M.Player
100-0002
1.
2.
3.
,
■
■
Mode
/
PLAYER
MEMORY CARD(
(REV(
(
( )
LOCK ),
)/FWD(
, "No Image!"
))
4.
■
MENU(
.
)
5.
(
Memory(
Menu selector(
) ,
)
Menu selector
)
6.
(
Protect(
Menu selector(
) ,
)
Menu selector
)
7.
8.
(
■
Menu selector(
On( )
)
)
Menu selector
, MENU(
( )
)
,
)
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
Using Quick Menu: Protect
✤ Quick menu is used to access Camcorder functions by simply using the Menu selector.
✤
Quick menu provides easier access to the frequently used menus without using the MENU button.
(
✤
✤
SC-D353/D354/D355)
Menu selector(
, MENU
),
1. Press the Menu selector .
2. Move the Menu selector to left or right to select
Protect , then press the Menu selector .
1
3. Move the Menu selector to the left or right to select Off or On , then press the Menu selector .
4. To exit, press the MENU button.
3
M.Play Select
Delete
Protect
Print Mark
MENU Exit
Photo
2/46
800x600
100-0002
2/46
800x600
1.
3.
Menu selector(
Menu selector(
Off( ) On( )
Menu selector(
)
2.
(
Protect(
Menu selector(
) ,
)
Menu selector
)
)
)
4.
, MENU( )
M.Play Select
Delete
Protect
Print Mark
MENU Exit
On
…
†
100-0002
2/46
800x600
√
,
100-0002
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
Deleting Still Images and Moving Images
✤ The Delete function works only in M.Player
mode.
✤ You can erase the still images and moving images recorded on the Memory card.
✤ If you want to delete protected images, you must first deactivate the image protection.
✤ An image which has been deleted cannot be recovered.
5
1. Set the Power switch to PLAYER .
6
2. Set the Mode switch to MEMORY CARD .
3. Using the / (REV/FWD) buttons, search for the still image that you want to delete.
4. Press the MENU button.
■ The menu list will appear.
5. Move the Menu selector to the left or right to select Memory , then press the Menu selector .
7
6. Move the Menu selector to the left or right to select
Delete , then press the Menu selector .
■ A message Do you want to delete? appears.
7. Move the Menu selector to the left or right to select
Yes or No , then press the Menu selector .
8. To exit, press the MENU button.
Previous
M.Player Mode
√ Memory
M.Play Select
Delete
Delete All
Protect
Print Mark
Format
Move
√
√
Select
Photo
Off
MENU Exit
M.Player Mode
Back
M.Play Select
Delete
Delete All
Protect
Print Mark
Format
Move Select MENU Exit
Next
(
Do you want to delete?
Yes No
7.
2/46
800x600
SC-D353/D354/D355)
100-0002
/
✤
✤
✤
✤
1.
2.
3.
Mode
4.
■
MENU(
5.
(
Memory(
Menu selector(
) ,
)
Menu selector
)
6.
Delete(
(
■
(
Menu selector(
) ,
)
Menu selector
)
"Do you want to delete?"
?)
Menu selector(
Menu selector(
M.Player
)
/
PLAYER
/ (REV(
)
)
/
)/FWD(
,
MEMORY CARD(
)) ,
Yes( ) No( ) ,
)
8.
, MENU( )
Deleting All images at once
Move the Menu selector to the left or right to select Delete All, then press the Menu selector. A message Do you want to delete all?
appears.
all?" (
Menu selector(
Menu selector(
?)
)
)
.
Delete All( )
"Do you want to delete
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
Using Quick Menu: Delete
✤ Quick menu is used to access Camcorder functions by simply using the Menu selector.
✤
Quick menu provides easier access to the frequently used menus without using the MENU button.
1
1. Press the Menu selector .
M.Play Select
Delete
Protect
Print Mark
MENU Exit
2. Move the Menu selector to left or right to select
Delete , then press the Menu selector .
3
3. Move the Menu selector to the left or right to select
Cancel or Delete , then press the Menu selector .
4. To exit, press the MENU button.
(
M.Play Select
Delete
Protect
Print Mark
MENU Exit
Delete
…
†
2/46
800x600
100-0002
2/46
800x600
SC-D353/D354/D355)
100-0002
✤
✤
Menu selector(
,
Menu selector(
, MENU
1.
)
2.
(
Delete(
Menu selector(
),
)
Menu selector
)
) 3.
Delete(
Menu selector(
) Cancel(
Menu selector( )
) ,
4.
, MENU( )
),
[ Notes ]
■ When there is no stored picture on the Memory card, the message
No image!
will be displayed.
■ If an erroneous image file is found on the Memory card, the message Memory card error!
will be displayed.
It may be caused by copying images from different digital devices.
■ Formatting the Memory card will delete all the stored images.
(see page 101)
■ To protect important pictures from accidental deletion, activate the image protection (refer to page 97).
■ Deleting all files using the Delete All menu may take a while.
To delete all files much faster, format the memory card after backing up the files into other storage device.
■
■
■
■
■
(" !")
,
,
, "No Image!"
, "Memory card error!"
.
,
,
( 101 )
( 97 )
,
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only) ( SC-D353/D354/D355)
Formatting the Memory Card
✤ The Format function works only in M.Player mode.
✤ You can use the memory format functions to completely delete all images and options on the Memory card, including protected images.
✤
The format function restores the Memory card to its initial state.
✤
✤
,
M.Player
Memory Format /
✤
Attention
✤ If you execute the memory format function, all images will be erased completely and erased images cannot be recovered.
✤ , ,
1. Set the Power switch to PLAYER .
2. Set the Mode switch to MEMORY CARD .
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select
Memory , then press the Menu selector .
Menu selector . (SC-D354/D355 only)
■ If you select Int. Memory or Memory card, a message All files are deleted! Do you want to format?
appears.
7. Move the Menu selector to the left or right to select Yes , then press the Menu selector .
■ Complete !
appears when the format is completed.
8. To exit, press the MENU button.
4
5. Move the Menu selector to the left or right to select
Format , then press the Menu selector .
6. Move the Menu selector to the left or right to select desired option( Int. Memory or Memory card ), then press the
5
M.Player Mode
√ Memory
M.Play Select
Delete
Delete All
Protect
Print Mark
Format
Move
M.Play Select
Delete
Delete All
Protect
Print Mark
Format
Move
√ Photo
√ Off
Select
M.Player Mode
Back
Select
MENU
MENU
Exit
Exit
1.
2.
3.
4.
5.
6.
7.
■
■
■
■
[ Notes ]
■ If you execute the Format function,all still images/motion clips will be erased completely and
■ erased still images/motion clips cannot be recovered.
Formatting the Memory card using a different device will cause Memory card read errors.
Formatting the Memory card deletes all the stored data in the Memory card.
Do not turn the power off in the middle of the formatting.
A Memory Stick with the protection tab set to save will not be formatted. (see page 87)
7
Yes
Do not format the Memory Card on a PC.
“Not Formatted” message may appear if a Memory Card formatted on a PC was inserted.
No
■
2/46
800x600
All files are deleted !
Do you want to format?
100-0002
8.
■
■
■
■
■
■
"Not Formatted" (
(
■
(
Mode
MENU(
PLAYER
)
MEMORY CARD(
■
(
Memory(
Menu selector(
) ,
)
)
Menu selector
Format(
Menu selector(
) ,
)
Menu selector(
( Int.memory
)
Menu selector
Menu selector(
SC-D354/D355)
)
)
, Memory Card
, are deleted! Do you want to format?"(
, )
)
)
"All files
Yes ( ) , Menu selector(
Menu selector(
, MENU(
)
)
"Complete!" (
)
) .
.
)
,
,
(
( 87 )
LOCK ),
,
,
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only) ( SC-D353/D354/D355)
MPEG Recording
✤ You can record moving picture images with audio on the Memory card.
✤ The screen format of the moving picture to be recorded is 720x480.
Saving Moving Picture Files onto a Memory Card
1. Check whether Memory card is inserted into the Camcorder.
If it is not in the Camcorder, insert it into the slot.
2. Set the Power switch to CAMERA .
3. Set the Mode switch to MEMORY CARD .
4. Press the Start/Stop button, the images are recorded on the Memory card in MPEG4.
You can record a Camcorder still image on Memory card by pressing the PHOTO button instead of the
Start/Stop button.
5. Press the Start/Stop button to stop the recording.
2
✤
✤
MPEG
■
■
[ Notes ]
■ MENU button and Menu selector are not available while MPEG recording.
To use MENU button and Menu selector, stop recording.
MPEG recording is not available when a menu or
Quick menu is displayed on the screen.
■
■
■
To start recording, press the MENU button to make it disappear.
Before using the MPEG REC function, check whether the Memory card is inserted into the Camcorder.
Moving images that you recorded are saved in *.avi (avi
1.0) file format on the Memory card.
The files that you recorded are saved in a following folder. (see illustration low right hand corner)
■
■
■
■
4
√
The moving picture images on a Memory card are a smaller size and lower definition than images on tape.
The sound is recorded in mono.
The following functions are not allowed in M.Cam Mode.
MSAMSUNG
DIS (Digital Image Stabilizer), Digital Zoom, Fade,
Program AE, Digital Effect, Slow Shutter.
While recording on a Memory card, don’t insert or eject the tape as it may record noise.
SSMOV
100SSMOV
While a Memory card, don’t eject the card or it may break the data on the Memory card or Memory card itself.
<Moving image>
Turning the power off while accessing the memory card may damage the data stored on the memory card.
■
■
MPEG
MPEG
5.
720X480
1.
2.
3.
4.
.
Mode
Start/Stop(
MPEG4
CAMERA
MEMORY CARD(
) .
PHOTO
,
Start/Stop(
,
)
■
■
(
MPEG
Menu selector(
MENU
) ,
,
MPEG
.
MENU
)
Menu selector
MPEG
,
,
■
■
■
(
■
■
■
M.Cam
DIS
,
MPEG
,
".avi"(avi 1.0)
)
,
,
,
,
,
, ,
)
,
,
:
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only) ( SC-D353/D354/D355)
MPEG Playback
MPEG
✤ The MPEG Playback function works only in M. Player mode.
✤ You can play the moving picture images on the Memory card.
Stereo audio is played back at the same time.
✤
Playing back on a PC shows better quality than on a TV.
✤
✤
M.Player
✤
1. Set the Power switch to PLAYER .
2. Set the Mode switch to MEMORY CARD .
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select
Memory , then press the Menu selector .
5. Move the Menu selector to the left or right to select
M.Play Select , then press the Menu selector .
■
2 provided with the camcorder) should be installed.
- You need Microsoft Windows Media Player Version 9 or higher version in order to play MPEG4 file on the Memory card on your PC.
- You can download the Microsoft Windows Media Player applied each languages on Microsoft Website, “http://www.microsoft.com/windows/ windowsmedia/download/default.asp”.
Memory Stick PRO provides better image quality than Memory Stick.
■
1.
2.
3.
4.
5.
Memory Stick PRO
■
(
Mode
MENU(
) ,
PLAYER
)
MEMORY CARD(
Menu selector(
Menu selector(
Menu selector(
) ,
)
Menu selector(
) ,
, MENU(
Menu selector(
)
/ (REV( )/FWD(
Memory Stick
)
) Memory
)
) M.play
Menu selector
6. Move the Menu selector to the left or right to select
Movie , then press the Menu selector .
7. To exit the menu, push the MENU button.
8. Using the / (REV/FWD) buttons, search for the
4 moving picture that you want to playback.
9. Press the
■
(PLAY/STILL) button.
The moving pictures recorded on the Memory card will playback.
■ You can control playback using the (PLAY/STILL)
/ (REW/FF)/ (STOP) buttons.
M.Player Mode
√ Memory
M.Play Select
Delete
Delete All
Protect
Print Mark
Format
Move
√ Photo
√ O
Select
-
-
MENU
[ Notes ]
■ MENU button and Menu selector are not available while MPEG playback. To use MENU button and
6
Menu selector, stop playback. MPEG playback is not available when a menu or Quick menu is displayed on the screen. To start playback, press the MENU button
■
■
■
■
M.Player Mode
Back
M.Play Select
Delete
Delete All to make it disappear.
There may be broken or mosaic pictures while playing the
MPEG4 moving picture images, but it is not malfunction.
The moving picture images that you recorded on the
Protect
Print Mark
Format
Move
Memory card may not play on other manufacturer’s.
The MPEG4 file recorded by another Camcorder may not play on by this
Camcorder.
To playback MPEG4 moving pictures on a PC, the Video Codec (in the CD
Select
■
■
■
Photo
Movie
MENU
Exit
Exit
6.
7.
8.
9.
■
■
Select(
(
(
■
■
(PLAY/STILL(
(REW(
MPEG
Menu selector(
Menu selector(
MPEG4
MPEG4 ,
,
,
/ ))
))
) Movie
)
(PLAY/STILL(
)/FF( )) /
/
(STOP(
)) , /
))
MENU
) .
) ,
MENU
MPEG
,
MPEG4
MPEG ,
,
Video Codec (
)
, WINDOWS Media Player Version 9
MPEG4
Microsoft WINDOWS Media Player
"http://www.microsoft.com/windows/windowsmedia/download/default.asp"
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
Using Quick Menu: M.Play Select
✤ Quick menu is used to access Camcorder functions by simply using the Menu selector.
✤
Quick menu provides easier access to the frequently used menus without using the MENU button.
(
✤
✤
SC-D353/D354/D355)
: M.Play Select(
Menu selector(
, MENU
)
),
1. Press the Menu selector .
1
2. Move the Menu selector to the left or right to select
M.Play Select , then press the Menu selector .
3. Move the Menu selector to the left or right to select
Photo or Movie , then press the Menu selector .
4. To exit, press the MENU button.
3
M.Play Select
Delete
Protect
Print Mark
MENU Exit
Photo
2/46
800x600
100-0002
2/46
800x600
M.Play Select
Delete
Protect
Print Mark
MENU Exit
Movie
…
†
100-0002
1.
Menu selector(
3.
Photo(
Menu selector(
) Movie(
Menu selector(
)
)
)
2.
Menu selector(
M.Play Select(
Menu selector( )
) ,
)
)
4.
, MENU( )
,
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
Recording an Image from a Cassette as a Still Image
✤ This function works only in Player mode.
✤ You can record still images from a cassette on a
Memory card.
✤
If you want to move recorded multiple still images from a cassette to a Memory card, use the COPY function.
1
1. Set the Power switch to PLAYER .
2
2. Set the Mode switch to TAPE .
3. Playback the cassette.
4. Press the PHOTO button.
■
■
The still image is recorded on the Memory card.
During the time it takes to save an image, the play back screen is paused and the OSD is displayed as illustrated in the lower right hand corner.
4
[ Notes ]
■ Still images copied from the cassette to the memory
■ card are saved in a 640x480 format.
Number of images you can save varies depending on the image resolution.
Now copying...
(
2/46
25min
SC-D353/D354/D355)
■
■
✤
✤
✤
Player
COPY
1.
2.
Mode
3.
4.
■
■
PHOTO
PLAYER
TAPE(
,
)
640X480
,
Digital Still Camera Mode
(SC-D353/D354/D355 only) (
Copying Still Images from a Cassette to Memory Card
✤ The photo copy function works only in Player mode.
✤
You can copy still images recorded with photo function on a cassette onto a Memory card.
✤
Rewind the tape to the point which you wants.
4
Player Mode
√ Tape
Photo Search
Photo Copy
Audio Select √ Sound[1]
SC-D353/D354/D355)
✤
✤
✤
Player
1.
PLAYER
1. Set the Power switch to PLAYER .
Move Select MENU Exit
2.
Mode TAPE(
2. Set the Mode switch to TAPE .
5
3. Press the MENU button.
■ The menu list will appear.
Player Mode
Back
Photo Search
Photo Copy
Audio Select
3.
■
MENU
4. Move the Menu selector to the left or right to select Tape , then press the Menu selector .
Move
4.
(
Tape(
)
Menu selector(
) ,
)
Menu selector
)
Select MENU Exit
5. Move the Menu selector to the left or right to select Photo Copy , then press the
Menu selector .
■ All still images that recorded on a cassette will be copied into a Memory card.
6
Photo Copy
Photo searching...
SP 0:44:38:03
25min
5.
Menu selector(
Photo Copy( selector
(
■
)
) ,
)
Menu
6. The Camcorder automatically performs the photo search to find still images and copy starts.
Back MENU Exit
6.
7. Press the (STOP) button to stop copying.
■ Copy stops when the cassette is finished or
Memory card is full.
Photo Copy
2/46
25min
7.
■
(STOP( ))
Now copying...
[ Note ]
Still images copied from the cassette to the memory card are saved in 640x480 format.
640X480
Back MENU Exit
,
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
Copy to (Copies Files from the Memory Card to the Built-in
Memory) (SC-D354/D355 only)
✤
The Copy To function works only in M.Player mode.
✤ You can copy selected or all images stored in the Memory card to the built-in memory.
( SC-D353/D354/D355)
✤
✤
Copy To(
( SC-D354/D355)
M.Player
1.
PLAYER
1. Set the Power switch to PLAYER .
2. Set the Mode switch to MEMORY CARD .
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select Memory , then press the Menu selector .
4
1
M.Player Mode
√ Memory
Memory Type
M.Play Select
Delete
Delete All
Protect
Print Mark
†
Move
√
√
√
Select
Int. Memory
Photo
Off
MENU Exit
5. Move the Menu selector to the left or right to select
Copy to , then press the Menu selector .
6. Move the Menu selector to the left or right to select options( Back , This File or All Files ), then press Menu selector .
■ To go back to the previous mode, select
Back .
■ If This File or All Files is selected, Now copying… is displayed on the screen and copying starts.
6
7. To exit, press the MENU button.
M.Player Mode
Back †
Copy to
Format
Back
This File
All Files
Move Select MENU Exit
2.
Mode MEMORY CARD(
3.
■
MENU
4.
(
Memory(
Menu selector(
) ,
)
Menu selector
)
)
5.
(
Copy to(
Menu selector(
) ,
)
)
Menu selector
6.
( Back(
■
■
) ),
Back
Menu selector(
) , This File(
-
Menu selector(
)
) , All Files(
This File( ) All Files(
"Now copying..." (
)
...) ,
) ,
7.
, MENU( )
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only) ( SC-D353/D354/D355)
Marking Images for Printing
✤
This Camcorder supports the DPOF (Digital Print Order Format) print format.
✤
You can automatically print images recorded on a Memory card with a printer supporting DPOF.
✤
There are 2 ways to make a Print Mark.
This File: You can set a print mark on the photo image displayed on the LCD screen. It can be set up to 999.
All Files: To print 1 copy each of all of the stored images.
1. Set the Power switch to PLAYER .
2. Set the Mode switch to MEMORY CARD .
■ The last recorded image appears.
3. Using the / (REV/FWD) buttons, search for the still image that you want to mark.
4. Press the MENU button.
■ The menu list will appear.
5. Move the Menu selector to the left or right to select Memory , then press the Menu selector .
5
7
6. Move the Menu selector to the left or right to select Print Mark , then press the Menu selector .
7. Move the Menu selector to the left or right to select desired option( All Off , This File or All Files ), then press the Menu selector .
8. If you select This File , move the Menu selector to the left or right to select the quantity, then press the Menu selector .
9. To exit, press the MENU button.
9
✤
✤
✤
-
-
1.
M.Player Mode
√ Memory
M.Play Select
Delete
Delete All
Protect
Print Mark
Format
Move
√
√
Select
Photo
Off
MENU Exit
M.Player Mode
Back
M.Play Select
Delete
Delete All
Protect
Print Mark
Format
Previous Next
All Off
This File
All Files
2/46
800x600
√
Removing the Print Mark
To remove all Print Marks select All Off , to remove individual file’s Print Mark, select the file and set This
FILE to 000 .
002
100-0002
DPOF(
DPOF
:
:
2.
PLAYER
Mode
■
3.
/ (REV(
MEMORY CARD(
)/FWD( )) ,
4.
■
MENU( )
5.
(
Memory(
Menu selector(
) ,
)
Menu selector
)
6.
(
Menu selector(
Print Mark( ) ,
)
7.
Off(
)
Menu selector
) ),
Menu selector(
) , This File(
Menu selector(
) ( All
) All Files(
)
8.
This File(
Menu selector(
Menu selector(
9.
, MENU( )
000
:
,
,
)
,
)
) ,
)
All Off(
This FILE
) ;
,
) .
ENGLISH Digital Still Camera Mode
(SC-D353/D354/D355 only)
Using Quick Menu: Print Mark
✤
Quick menu is used to access Camcorder functions by simply using the Menu selector.
✤ Quick menu provides easier access to the frequently used menus without using the MENU button.
✤
It can be set on the selected file only.
1. Press the Menu selector .
2. Move the Menu selector to left or right to select
Print Mark , then press the Menu selector .
1
3. Move the Menu selector to the left or right to select the quantity, then press the Menu selector .
M.Play Select
Delete
Protect
Print Mark
MENU Exit
Photo
(
✤
✤
✤
4. To exit, press the MENU button.
3
[ Notes ]
■ If the Print Mark is set to This File, you can set the
■ number of copies from 999.
If the Print Mark is set to All Files, you can set the
■ number of copies to 1.
The All Files option may require extended operation time depending on the number of stored images.
■ DPOF supporting printers are commercially available.
■ Use the USB cable provided with the Camcorder.
√
M.Play Select
Delete
Protect
Print Mark
MENU Exit
002
2/46
800x600
2/46
800x600
SC-D353/D354/D355)
100-0002
2/46
800x600
100-0002
3.
4.
Menu selector(
, MENU
),
Menu selector(
Menu selector(
, MENU( )
)
)
■
■
■
■
1
0 999
This File(
All Files
■
,
DPOF
USB
,
,
,
ALL FILES(
,
1.
Menu selector( )
2.
(
Mark(
Menu selector(
) ,
)
)
Menu selector
,
002
100-0002
ENGLISH
PictBridge TM (SC-D353/D354/D355 only) PictBridge TM ( SC-D353/D354/D355)
Printing Your Pictures – Using the PictBridge
TM
✤ PictBridge TM function works only in M.Player mode.
✤
By connecting the Camcorder to printers with PictBridge support (sold separately), you can send images from the Memory card directly to the printer with a few simple operations.
✤
With the PictBridge Support, you can control the printer directly through your Camcorder in order to print out stored pictures. For direct printing of your stored pictures using the PictBridge function, you must connect your Camcorder to a PictBridge printer using a USB cable.
Connecting To a Printer
1. Turn your printer power off.
Turn your Camcorder on by setting the Power switch to PLAYER .
2. Set the Mode switch to MEMORY CARD .
3. Press the MENU button.
■ The menu list will appear.
4. Move the Menu selector to the left or right to select
System , then press the Menu selector .
4
5. Move the Menu selector to the left or right to select
USB Connect , then press the Menu selector .
6. Move the Menu selector to the left or right to select Printer , then press the Menu selector .
■
■
Computer: Connect to a computer.
6
Printer: Connect to a printer. (To use the PictBridge function, connect to a printer.)
7. Connect your Camcorder to the printer using the provided USB cable.
8. Turn your printer power on.
■ The PictBridge menu screen appears automatically
■ after a short period.
The cursor highlights Printer.
Selecting Images
1. In the PictBridge settings menu, press the /
(REV/FWD) buttons to select an image to print.
Setting the Number of Prints
2. Move the Menu selector to the left or right to select
Copies , then press the Menu selector .
3. Move the Menu selector to the left or right to set the number of prints, then press the Menu selector .
M.Player Mode
√ System
Clock Set
Remote
Beep Sound
USB Version
USB Connect
Language
Move
Previous
✤
✤
✤
1.
Next
√ On
√ On
√ USB 1.1
√ Computer
√ English
Select MENU Exit
M.Player Mode
Back
Clock Set
Remote
Beep Sound
USB Version
USB Connect
Language
Move Select
Computer
Printer
MENU Exit
M.Player Mode
Back
Copies
Date/Time
Num.
002
100-0002
M.Player
PictBridge TM
PictBridge TM
USB
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
■
■
,
(
Player
Mode MEMORY CARD(
MENU
(
■
Menu selector(
System( ) ,
)
Menu selector
)
Menu selector(
USB Connect(USB ) ,
(
■
■
Menu selector(
Menu selector(
) ,
Computer :
)
Menu selector(
Printer : (
)
)
)
)
Printer
)
PictBridge TM
.
USB
,
,PictBridge TM
Printer
PictBridge TM
(REV( )/FWD( ))
,
(
Copies(
Menu selector(
)
) ,
Menu selector(
Menu selector( )
/
),
)
Menu selector
) ,
ENGLISH
PictBridge TM (SC-D353/D354/D355 only) PictBridge TM ( SC-D353/D354/D355)
Setting the Date/Time Imprint Option
4. Move the Menu selector to the left or right to select Date/Time , then press the Menu selector .
5. Move the Menu selector to the left or right to select the Date/Time display type, then press the Menu selector .
■ Date/Time display type: Off, Date, Time,
Date&Time
Printing Images
5
M.Player Mode
Back
Copies
Date/Time
Previous Next
Off
Date
Time
Date&Time
100-0002
4.
(
Menu selector(
Date/Time(
)
/ ) ,
)
Menu selector
5.
■
)
/
Date(
Menu selector(
,
)
Menu selector (
,Time(
:Off( ,
,Date&Time(
Move the Menu selector to the left or right to select
Print , then press the Menu selector , and selected image files will be printed.
M.Player Mode
Back
Copies
Date/Time
( ) ,
Menu selector(
Menu selector(
) ,
Previous
■
■
■
■
■
[ Notes ]
■ The Date/Time Imprint Option may not supported by all printers.
Check with your printer manufacturer.
■
The DATE/TIME Menu cannot be setup if the printer does not support this option.
The PictBridge TM is a registered trademark of CIPA(Camera &
Imaging Products Association), an image transfer standard developed by Canon, Fuji, HP, Olympus, Seiko Epson, and Sony.
PictBridge supporting printers are commercially available.
Use the USB cable provided with the Camcorder.
Use the AC power adapter for your Camcorder during PictBridge
Direct Printing.
Turning your Camcorder off during the printing might damage data
■ on the Memory card.
Printing still images is supported. Motion clips are not available for printing.
You can set various printing options depending on the printer.
Please refer to the user’s manual of the printer.
Next
■
100-0002
/ ,
■
■
■
■
■
■
■
PictBridge TM
,
Epson, and Sony
PictBridge TM
/ , /
CIPA(Camera & Imaging Products Association)
Canon, Fuji, HP, Olympus, Seiko
PictBridge
,
TM
USB
,
,
,
/
ENGLISH
Maintenance
After Finishing a Recording
✤ At the end of a recording you must remove the power source.
✤ When recording with a Lithium ion Battery pack, leaving the pack on the Camcorder can reduce the life span of the battery. The Battery pack should be release after recording is completed.
1
✤
✤
1. Slide the TAPE EJECT switch in the direction of the arrow.
■ Opening the cassette door ejects the tape
■ automatically.
Please wait while the tape is completely ejected.
2. After removing the tape, close the door and store the Camcorder in a dust free environment.
Dust and other foreign materials can cause squareshaped noise or jerky images.
3. Set the Power switch to the Off .
4. Disconnect the power source or remove the lithium ion Battery pack.
Press the BATTERY RELEASE button located on the bottom of the Camcorder and slide the Battery pack in the direction of the arrow.
2
3
4
, ,
1.
■
■
2.
,
,
TAPE EJECT
,
3.
4.
BATTERY RELEASE ,
ENGLISH
Maintenance
Cleaning and Maintaining the Camcorder
Cleaning the Video Heads
To ensure normal recording and clear pictures, clean the video heads when the playback pictures display square block-shaped noise or distortion, or a blue screen appears.
,
,
1. Set the
2. Set the
Power
Mode switch to switch to
3. Insert the cleaning tape.
4. Press the
5. Press the
PLAYER
TAPE
.
. (SC-D353/D354/D355 only)
(PLAY/STILL) button.
(STOP) button after 10 seconds.
■
■
[ Notes ]
■ Check the quality of the picture using a videocassette.
If the picture quality has not improved, repeat the operation.
Clean the video heads with a dry type cassette cleaner.
Some cleaning cassette products stop automatically. Refer to the cleaning cassette’s instructions for detailed information.
If the problem continues after the cleaning, consult your nearest
Samsung dealer or Authorized Service Center.
■
■
■
-
1.
2.
(
Mode TAPE(
SC-D353/D354/D355)
3.
(blue screen)
PLAYER
4.
5.
10
(PLAY/STILL(
(STOP(
/
))
))
)
,
,
,
,
ENGLISH
Maintenance
Using Your Camcorder Abroad
✤ Each country or region has its own electric and color systems.
✤
Before using your Camcorder abroad, check the following items.
✤
✤
,
■
■
Power sources
You can use your Camcorder in any country or area with the supplied AC Power adapter within 100V to 240V, 50/60 Hz.
Use a commercially available AC jack adapter, if necessary, depending on the design of the local wall outlet.
Color system
You can view your recording in the Viewfinder.
However, to view it on a television or copy it to a videocassette recorder, the television or VCR must be NTSC-compatible and have the appropriate audio/video jacks.
Otherwise, you may need to use a transcoder.
PAL-compatible Countries/Regions
Australia, Austria, Belgium, Bulgaria, China, CIS, Czech Republic,
Denmark, Egypt, Finland, France, Germany, Greece,
Great Britain, Holland, Hong Kong, Hungary, India, Iran, Iraq, Kuwait,
Libya, Malaysia, Mauritius, Norway, Romania,
Saudi Arabia, Singapore, Slovak Republic, Spain, Sweden,
Switzerland, Syria, Thailand, Tunisia, etc.
NTSC-compatible Countries/Regions
Bahamas, Canada, Central America, Japan, Korea, Mexico,
Philippines, Taiwan, United States of America, etc.
[ Note ]
You can make recordings with your Camcorder and view pictures on the LCD screen from anywhere in the world.
■
■
,
,
,
, ,
NTSC
,
100v 240v,50/60Hz
,
,
PAL
,
,
,
,
,
,
,
,
,
NTSC
, ,
,
/
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
, ,
,
,
,
/
, , , , ,
,
/
,
ENGLISH
Troubleshooting
Troubleshooting
✤ Before contacting a Samsung authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
✤
Self Diagnosis Display
Display Blinking
Tape end !
Tape end !
No Tape !
slow slow no slow
Informs that...
Action the Battery pack is almost discharged. Change to a charged one.
When the remaining time on the tape is about 2 minutes.
Prepare a new one.
Change to a new one.
the tape reached its end.
there is no tape in Camcorder.
Insert a tape.
Protection !
....D
L
C
R slow slow slow the tape is protected from recording.
the Camcorder has some mechanical fault.
If you want to record, release the protection.
1. Eject the tape.
2. Set to OFF.
3. Detach the battery.
4. Reattach the battery.
* If unresolved contact your local samsung service center.
moisture condensation has formed in the Camcorder.
see below.
Moisture Condensation
✤
If the Camcorder is brought directly from a cold place to a warm place, moisture may condense inside the Camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the unit may not operate correctly.
To prevent possible damage under these circumstances, the
Camcorder is fitted with a moisture sensor.
✤ If there is moisture inside the Camcorder, (DEW) is displayed.
If this happens, none of the functions except cassette ejection will work.
Open the cassette compartment and remove the battery.
Leave the Camcorder for at least two hours in a dry warm room.
✤
✤
Tape end !
Tape end !
No Tape !
Protection !
....D
L
C
R
)
.
,
,
2
,
,
1.
2.
3.
4.
*
OFF( )
,
(
(DEW
,
),
,
ENGLISH
Troubleshooting
Self Diagnosis Display in M.Cam/M.Player Modes
(SC-D353/D354/D355 only)
Display
No Memory Card!
Blinking slow
Informs that...
There is no Memory card in the Camcorder.
Memory Full!
slow
There is not enough memory to record.
Action
Insert a Memory card.
Change to a new Memory card. Erase recorded image.
No image!
slow
There are no images recorded on the Memory card.
Record new images.
Write protect!
Protect!
Read error!
Write error!
Not Formatted!
Now deleted...
Memory Card error!
slow slow slow slow slow
The Memory card is record protected.
When you try to delete to protected image.
slow When progressing file delete.
slow
The Camcorder can not playback.
The Camcorder can not record.
The Memory card needs to format.
If inserted Memory Card is not recognized by the Camcorder.
Release the write protect tab on the Memory card.
Cancel the protection of image.
Format a Memory card or insert Memory card recorded on this Camcorder.
Format a Memory card or change to a new Memory card.
Format a Memory card.
(see page 101)
Wait until delete has been finished.
Eject and re-insert the memory card
Try another Memory Card
(
M.Cam/M.Player
SC-D353/D354/D355)
No Memory Card!
Memory Full!
No Image!
Write Protect!
Protect!
Read error!
Write error!
Not Formatted!
Now deleted....
Memory Card error!
,
,
( 101 )
ENGLISH
Troubleshooting
✤ If these instructions do not solve your problem, contact your nearest Samsung authorized service center.
✤
Symptom
You cannot switch the
Camcorder on.
Start/Stop button does not operate while recording.
The Camcorder shuts off automatically.
Charge runs out quickly.
Explanation/Solution
Check the Battery pack or the AC Power adapter.
Check the Power switch is set to CAMERA.
You have reached the end of the cassette.
Check the record protection tab on the cassette.
You have left the Camcorder set to STBY for more than 5 minutes without using it.
The Battery pack is fully exhausted.
The atmospheric temperature is too low.
The Battery pack has not been charged fully.
The Battery pack is completely dead, and cannot be recharged, Use another Battery pack.
When you see a blue screen during playback.
The video heads may be dirty.
Clean the head with a cleaning tape.
A vertical strip appears on the screen when recording a dark background.
The image in the
Viewfinder is blurred.
Auto focus does not work.
Play, FF or REW button does not work.
When you see a mosaic pattern during playback search.
The contrast between the subject and the background is too great for the Camcorder to operate normally.
Make the background bright to reduce the contrast or use the BLC function while you are recording in bright
Surroundings.
The Viewfinder lens has not been adjusted.
Adjust the Viewfinder control lever until the indicators displayed on the Viewfinder come into sharp focus.
Check the Manual Focus menu.
Auto focus does not work in the Manual Focus mode.
Check the Power switch. Set the Power switch to PLAYER.
You have reached the beginning or end of the cassette.
This is normal operation and it is not a failure or defect.
The tape may be damaged. Replace the tape.
Cleaning the video heads (see page 113).
Start/Stop
( )
,
,
.
Record search(
) ,
,
STBY
CAMERA
5
,
,
Power ,
,
BLC(
,
)
,
,
PLAYER( );
,
113
ENGLISH
Specifications
Model Name: SC-D351/D352/D353/D354/D355
System
Video signal
Video recording system
Audio recording system
Usable cassette
Tape speed
Tape recording time
FF/REW time
Image device
Lens
Filter diameter
LCD screen/Viewfinder
Size/dot number
LCD screen Method
Viewfinder
Connectors
Video output
S-video output
Audio output
DV input/output
USB output
External mic
NTSC
2 rotary heads, Helical scanning system
Rotary heads, PCM system
Digital video tape (6.35mm width): Mini DV cassette
SP: approx. 18.81mm/s LP: approx. 12.56mm/s
SP: 60 minutes (when using DVM 60), LP: 90 minutes (when using DVM 60)
Approx. 150 sec. (using DVM60 tape)
CCD (Charge Coupled Device) (680k pixels)
F1.6 20x(Optical), 900x(Digital) Electronic zoom lens
Ø30
2.36 inchs 112k
TFT LCD
B/W LCD (SC-D351/D352/D353/D354 only), Color LCD (SC-D355 only)
1Vp-p (75
Ω terminated)
Y: 1Vp-p, 75
Ω
, C: 0. 286Vp-p, 75
Ω
-7.5dBs (600
Ω terminated)
4pin special in/out connector
Mini-B type connector
Ø3.5 stereo
General
Power source
Power source type
Power consumption
(Recording)
Operating temperature
Storage temperature
External dimension
Weight
Internal MIC
Remote control
(SC-D354/D355 only)
DC 8.4V, Lithium Ion Battery Pack 7.4V
Lithium Ion Battery Pack, Power supply (100V~240V) 50/60Hz
4.3W(LCD), 4.0W(Viewfinder)
0˚~40˚C (32˚F~104˚F)
-20˚C ~ 60˚C (-4˚F ~ 140˚F)
Height 3.62inches(92mm), Length 4.63inches(117.5mm),
Width 2.52inches(64mm)
410g (0.904lb, 14.46oz) (Except for Lithium Ion Battery Pack and tape)
Omni-directional stereo microphone
Indoors: greater than 49ft(15m) (straight line), Outdoors: about 16.4ft(5m)
(straight line)
- These technical specifications and design may be changed without notice.
(
-
-
/
/
: SC-D351/D352/D353/D354/D355
S-VIDEO
DV(
USB
( )
/
SC-D354/D355)
NTSC
2 ,
,PCM
SP
SP
LP
( 6.35MM):Mini DV
: 18.81mm/ LP
:60
: 90
(
(
DVM60 )
DVM60 )
150 (
CCD(
F1.6 20x(
Ø30
DVM60 )
)(680K )
),900x(
: 12.56mm/
)
2.36
TFT
112K
LCD(
LCD(
SC-D351/D352/D353/D354),
SC-D355)
)
1Vp-p(75 )
Y: 1Vp-p 75 , C:0.286Vp-p, 75
-7.5dBs (600 )
4
Ø3.5
B
DC 8.4V,
,
7.4V
(100V~240V) 50/60Hz
) 4.3W( ),4.0W(
0˚C ~40˚C (32˚F~104˚F)
-20˚C ~60˚C (-4˚F~140˚F)
92mm
410g(
117.5mm,
)
64mm
:
:
,
15
5
.
.
ENGLISH
Index
- A -
Accessories ................................................12
AF/MF ..........................................................58
Audio Dubbing ............................................ 77
Audio Mode ................................................ 55
- B -
Battery Pack .............................................. 21
BLC..............................................................46
- C -
Cassette .................................................... 36
Cleaning .................................................. 113
Clock Set .................................................... 27
Connecting ................................................ 71
- D -
Date/Time .................................................. 33
DC Cable .................................................... 20
Deleting ...................................................... 99
Demonstration ............................................ 31
DIS.............................................................. 61
Digital Effect................................................ 65
DV ..........................................................79, 80
- E -
EASY.Q Mode ............................................ 40
Exposure .................................................... 57
- F -
Fade............................................................ 45
Formatting ................................................ 101
Frame advance .......................................... 74
Function buttons ........................................ 13
- H -
Hand Strap ................................................ 18
- I -
IEEE1394 .................................................. 79
- M -
Memory card .............................................. 88
Memory Stick.............................................. 87
MPEG Recording .................................... 102
- O -
OSD...................................................... 24, 25
- P -
Photo Copy .............................................. 106
Photo Quality ............................................ 91
Photo Search.............................................. 68
Program AE ........................................ 63, 64
Protection .................................................. 97
- R -
Rec Mode .................................................. 54
Rec Search ................................................ 41
Remote ...................................................... 28
Remote control .................................... 17, 43
- S -
Shutter Speed .......................................... 57
Sound ........................................................ 70
Speaker .................................................... 70
Still images ................................................ 95
- T -
Tele MACRO .............................................. 44
TV Display .................................................. 34
- U -
USB ...................................................... 81~86
- V -
Viewfinder ....................................................35
- W -
White Balance ............................................ 59
Wind Cut .................................................... 56
- L -
LCD ............................................................ 32
- Z -
ZERO MEMORY ........................................ 42
Zoom .......................................................... 44
Accessories (
AF/MF ( /
Audio dubbing (
Audio Mode (
- A -
.....................................12
..............................58
..................................77
..............................55
- B -
Battery Pack (
BLC (
.................................21
.......................................... 46
Cassette (
Cleaning (
Clock Set (
Connecting (
- C -
.......................................36
.........................................113
..................................27
.......................................71
- D -
Date/Time ( / ................................33
DC Cable (DC ........................................20
Deleting ( ............................................99
Demonstration ( .................................31
DIS ( ...............................................61
DIigital Effect ( ............................65
DV ..........................................................79,80
- E -
EASY Q Mode (
Exposure (
..........................40
.........................................57
- F -
Fade (
Formatting (
).........................................45
.................................101
Frame advance (
Function buttons (
.........................74
..........................13
Hand Strap (
- H -
......................................18
- I -
IEEE1394 ................................................. 79
LCD monitor (
- L -
.............................32
- M -
Memory card ( ................................88
Memory Stick............................................. 87
MJPEG Recording ( MJPEG) ............102
- O -
OSD ( ....................................24,25
- P -
Photo copy (
Photo quality (
Photo Search (
Program AE (
Protection (
.............................106
.............................91
.......................... 68
.................63,64
).........................................97
Rec Mode (
Rec Search (
Remote control (
- R -
................................54
.......................41
..........................17, 43
- S -
Shutter Speed (
Sound (
..........................57
...............................................70
Speaker (
Still images (
......................................... 70
...............................95
Tele MACRO (
TV Display (
- T -
.............................44
................................34
- U -
USB .....................................................81~86
Viewfinder (
- V -
. ..................................35
White Balance (
Wind Cut (
- W -
.............................59
......................................56
- Z -
ZERO MEMORY (
Zoom (
......................42
........................................44
ENGLISH
MEMO
ENGLISH
MEMO
ENGLISH
THIS CAMCORDER IS MANUFACTURED BY:
*Samsung Electronics’ Internet Home Page
United States
United Kingdom
France
Australia
Germany
Sweden
Poland
Canada
Panama
Italia
Spain http://www.samsungusa.com
http://www.samsungelectronics.co.uk
http://www.samsung.fr
http://www.samsung.com/au http://www.samsung.de
http://www.samsung.se
http://www.samsung.com/pl http://www.samsungcanada.com
http://www.samsung.com.pa
http://www.samsung.it
http://www.samsung.es
* http://www.samsungusa.com
http://www.samsungelectronics.com.tw
Public link updated
The public link to your chat has been updated.
Advertisement