UltraBrite Led Desk Lamp User Manual
Quảng cáo
Quảng cáo
Qi-Certified
Wireless Charging
Technology
LED DESK LAMP
with Wireless Charging & Mood Light
Chroma RGB Mood and Night Light
Wireless Charging
5 Levels of Brightness
Dimmer Function
3 Light Modes
Warm/Natural/Bright
Night Light
Touch Control
USER MANUAL
SAVE THESE INSTRUCTIONS
For Customer Care, product operation information or problem resolution, call toll-free 1-877-654-1991.
Item# 2311393
Model# UDL0856-SLV
Ultra-Brite, Long-Lasting LEDs
(Up to 35,000 hours)
Chroma RGB Color-Changing
Mood & Night Light
Wireless Charging
(5V, 1.0 Amp)
3 Light Modes
Warm/Natural/Bright
Power On/Off
5 Levels of Brightness
Dimmer Function
Night Light One-Touch
Chroma RGB Mood
Light Control
2
Charging Status
LED Indicator
(located near power adapter port)
UltraBrite ® LED Desk Lamp with Wireless Charging and Mood Light
User Manual
SAVE THESE INSTRUCTIONS
For Customer Care, production operation information or problem resolution, call toll-free 1-877-654-1991.
IMPORTANT SAFETY INSTRUCTION
WARNING - DO NOT EXPOSE THE ADAPTOR TO RAIN OR MOISTURE TO
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
WARNING!: USE THIS PRODUCT ONLY ON A FIRM, LEVEL SURFACE AND
PREVENT ANY OBJECTS OR MATERIALS FROM COVERING THE LIGHT SOURCE
AND/OR VENTILATION HOLES OF THE PRODUCT. PLEASE READ THE
INSTRUCTIONS BEFORE OPERATING THIS PRODUCT.
- LED module is not replaceable.
- Do not break or pull out LED bulbs.
- Indoor use only.
- Do not look directly at the light.
- LED module lamp head may get hot after several hours of continuous use,
AVOID placing your hands directly on LED light panel.
- Keep lamp away from materials that may burn.
- If the power cord or adaptor is damaged, replace the power supply cord and adapter. Call Customer Care for assistance.
Elevate your lifestyle!
3
Operation Instructions:
1. Use this product only on a firm, level surface and prevent any objects or materials from covering the light source and/or ventilation holes of the product.
2. Connect the AC adapter input into the connector in the rear of the lamp.
Plug the AC adapter into a standard household 120V AC outlet. Note: Use only with the supplied AC adapter to avoid damage or fire.
3. Touch On/Off to turn on the lamp.
4. Touch control button brightness.
to adjust brightness. There are five levels of
5. Touch to switch between 3 light temperature modes: Warm, Natural,
Bright light.
6. Touch to activate low level night light.
7. Touch once to activate Chroma RGB mood light. Touch once again to hold current color. Touch to deactivate Chroma RGB mood light.
8. Touch On/Off to turn off.
Wireless Charging Specifications:
Output: 1.0Amp, 5 Volt.
Place the Qi compatible device over the wireless charging icon ( ).
When the device begins charging, the device will indicate that charging is active. This feature will not charge all Qi compatible devices. Please refer to your device instructions for enabled capability. Device case or cover should be removed to ensure a stable connection.
Charging Status LED Indicator (located near power adapter port)
Without light - Wireless charging is on standby.
With light - Wireless charging is active. Device will indicate charging is active.
Fast flashing - Abnormal operation. Recheck device position, remove cover, or check Qi compatibility with your device.
The ‘Qi’ symbol is a trademark of the Wireless Power Consortium.
All rights reserved.
4
Specifications:
Light Bulbs: 56 LEDs + 7 RGB LEDs
Brightness Levels: 5 Levels of Brightness
Light Temperature Modes: 3 Modes (Warm/Natural/Bright Light)
LED Life: 35,000 hours
Wireless Charging pad: 1.0A (5V)
Light Output (Lumens): 700LM
Colour Rendering Index (CRI): 80 Ra
Correlated Colour Temperature (CCT):
Cold (5000K-6500K), Warm (2700K-3000K), Neutral (3000K-4500K)
Watts: 10W
Input Voltage: 100-240V 50/60Hz
Power: DC 12V 1.5A
Product Size: 10”L x 5.75”W x 16.77” H (254mm L x 146mm W x 426mm H)
Product Weight: 1.43 lbs (0.65kg)
Maintenance Instructions:
1. Read the instruction manual carefully before assembly or use in case of any risk.
2. Do not switch the light On/Off repeatedly in a short time to protect the lifetime of the LED.
3. LED module is not replaceable. Do not break or pull out LED bulbs.
4. Do not look directly at the light.
5. Keep lamp away from material that may burn.
6. Use a dry cloth for daily cleaning.
7. For product operation information or a problem resolution, call toll-free 1-877-654-1991.
Elevate your lifestyle!
5
Lamp FCC Instructions:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experience radio/TV technician for help.
Lamp transformer FCC instructions:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experience radio/TV technician for help.
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.”
6
One Year Limited Warranty / Product Registration
The manufacturer warrants the machine for a period of one year to be free from defects in material and workmanship; this warranty does NOT cover normal wear and tear. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at the manufacturer’s option and expense, of the defective part except for the shipping cost. It is the responsibility of the consumer to pay the shipping costs to return the machine to the manufacturer.
This warranty is valid for the original consumer only with original proof of purchase and is not transferable. This warranty does not apply in cases of abuse, mishandling or unauthorized repair. The machine contains no serviceable parts.
Do not attempt to service this product yourself, as opening or removing covers may expose you to risk of injury. The manufacturer disclaims all liability for injuries resulting from opening the machine. Mechanical damage resulting from opening the machine may void the warranty. ANY IMPLIED WARRANTY,
INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, IS HEREBY LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE. In no event shall the manufacturer be liable for any consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights that vary according to the laws of each territory.
Please retain original proof of purchase to ensure that your product is recorded and warranty information received.
Return Instructions
Call 877-654-1991 for a Return Authorization Number (RA#) in order to return a defective product.
Product Registration
Please register your new product by calling 877-654-1991.
Contact Us
For more information, please call 877-654-1991.
Elevate your lifestyle!
7
Elevate your lifestyle!
Chargement
à induction sans fil — technologie certifiée Qi
LAMPE DE BUREAU DEL
Avec chargeur sans fil et l’éclairage d’ambiance
Veilleuse de nuit
Manuel de l’utilisateur
CONSERVER CES INSTRUCTIONS
Pour le service à la clientèle, des renseignements sur le fonctionnement du produit ou le règlement d’un problème, composez le numéro sans frais 1-877-654-1991.
Article# 2311393
Modèle no UDL0856-SLV
Ampoules DEL de longue durée UltraBrite ®
(jusqu’à 35 000 heures)
Éclairage d’ambiance et veilleuse à couleur variable RGB Chroma
Recharge sans fil
(1 A, 5 V)
3 modes d’éclairage - lumière chaleureuse/naturelle/vive
Touche On/Off
5 niveaux de variateur de luminosité
Touche de veilleuse
One-Touch
Commande d’éclairage d’ambiance RGB Chroma
10
Voyant d’état decharge (situé près du port de l’adaptateur d’alimentation)
Lampe de bureau DEL UltraBrite ® d’ambiance
avec chargeur sans fil et l’éclairage
Manuel de l’utilisateur
CONSERVER CES INSTRUCTIONS
Pour le service à la clientèle, des renseignements sur le fonctionnement du produit ou le règlement d’un problème, composez le numéro sans frais 1-877-654-1991.
CONSIGNES DE SÉCURITÉ IMPORTANTES
AVERTISSEMENT - NE LAISSEZ PAS L’ADAPTATEUR À LA PLUIE OU À
L’HUMIDITÉ AFIN DE DIMINUER LE RISQUE D’INCENDIE, DE DÉCHARGE ÉLEC-
TRIQUE OU DE BLESSURES.
AVERTISSEMENT!: UTILISEZ CE PRODUIT UNIQUEMENT SUR UNE SURFACE
FERME ET PLANE ET EMPÊCHEZ QUE LA SOURCE DE LUMIÈRE ET/OU LES ORI-
FICES DE VENTILATION DU PRODUIT SOIENT OBSTRUÉS PAR DES OBJETS OU
DU TISSU. VEUILLEZ LIRE LE MODE D’EMPLOI AVANT D’UTILISER CE PRODUIT.
- Le module DEL n’est pas remplaçable.
- Ne brisez pas ou ne retirez pas les ampoules DEL.
- Utilisez le produit uniquement à l’intérieur.
- Ne regardez pas directement la lumière.
- Le module DEL de la lampe peut devenir chaud après plusieurs heures d’utilisation continue. ÉVITEZ de toucher directement le panneau lumineux
DEL.
- Ne placez pas la lampe près de matériaux susceptibles de brûler.
- Si le cordon d’alimentation ou l’adaptateur est endommagé, remplacez le cordon et l’adaptateur. Appelez le service à la clientèle pour de l’aide.
Elevate your lifestyle!
11
Mode d’emploi :
1. Utilisez ce produit uniquement sur une surface ferme et plane et empêchez que la source de lumière ET/OU LES ORIFICES DE VENTILATION du produit soient obstrués par des objets ou du tissu.
2. Branchez la fiche de l’adaptateur CA dans la borne d’entrée à l’arrière de la lampe. Branchez l’adaptateur CA dans une prise électrique standard
CA de 120 V. Remarque : Utilisez uniquement avec l’adaptateur CA fourni pour prévenir des dommages ou un incendie.
3. Appuyez sur la touche On/Off pour allumer la lampe.
4. Appuyez sur le bouton cinq niveaux de luminosité.
de commande pour régler la luminosité. Il y a
5. Appuyez sur le bouton de commande pour passer d’un mode d’éclairage à un autre : lumière chaleureuse, naturelle ou vive.
6. Appuyez sur le bouton de commande pour activer la fonction de veilleuse.
7. Appuyez une fois pour activer la fonction d’éclairage d’ambiance
Chroma RGB. Appuyez à nouveau pour conserver la couleur active.
Appuyez pour désactiver la fonction d’éclairage d’ambiance Chroma
RGB.
8. Appuyez sur la touche On/Off pour éteindre la lampe.
Chargement à induction sans fil — technologie certifiée Qi
Spécifications pour la recharge sans fil :
Sortie de tension : 1 A, 5 V.
Placez le dispositif compatible Qi sur l’icône de recharge ( ). Lorsque le dispositif lancera la recharge, le dispositif l’indiquera. Ce dispositif ne rechargera pas tous les appareils compatibles Qi. Référez-vous au mode d’emploi de votre dispositif pour en connaître les capacités. Retirez l’enveloppe ou le couvercle du dispositif pour assurer un raccordement stable.
Voyant DEL indiquant l’état de recharge (situé près du port de l’adaptateur)
Sans lumière - la recharge sans fil est en attente.
Avec lumière - la recharge sans fil est en cours. Le dispositif indiquera que la recharge est en cours.
Clignotement rapide - fonctionnement anormal. Vérifiez à nouveau la position du dispositif, retirez le couvercle ou vérifiez la compatibilité Qi de votre chargeur.
Le symbole « Qi » est la marque de commerce du Consortium sur l’alimentation sans fil. Tous droits réservés.
12
Spécifications :
Ampoules : 56 ampoules DEL et 7 ampoules DEL RGB
Niveaux de luminosité : 5 niveaux de luminosité
Modes d’éclairage : 3 modes d’éclairage (lumière chaleureuse/naturelle/vive)
Durée de vie des ampoules DEL : 35 000 heures
Spécifications de la plaque de recharge sans fil : 1 A (5 V)
Rendement lumineux (Lumens) : 700 lm
Indice de rendu des couleurs (IRC) : 80 Ra
Température de couleur corrélée (TCC) :
Froide (5000K à 6500K), chaude (2700K à 3000K), neutre (3000K à 4500K)
Watts : 10W
Tension d’entrée : 100 à 240 V 50/60 Hz
Alimentation : DC 12 V 1.5A
Taille du produit : 254mm L x 146mm W x 426mm H
Poids du produit : 0.65kg
Instructions pour l’entretien :
1. Lisez le mode d’emploi attentivement avant d’assembler le produit ou de l’utiliser afin d’éviter tout risque.
2. N’appuyez pas sur la touche On/Off à répétition sur une courte période afin de protéger la durée de vie de l’ampoule DEL.
3. Le module DEL n’est pas remplaçable. Ne brisez pas ou ne retirez pas les ampoules DEL.
4. Ne regardez pas directement la lumière.
5. Ne placez pas la lampe près de matériaux susceptibles de brûler.
6. Utilisez un linge sec pour le nettoyage quotidien.
7. Pour des renseignements sur le fonctionnement du produit ou le règlement d’un problème, composez le numéro sans frais 1-877-654-1991.
Elevate your lifestyle!
13
CAN ICES-005(B) / NMB-005(B)
14
Garantie limitée de un ans / Enregistrement du produit
Le fabricant garantit pour une période de un ans que l’appareil est exempt de tout défaut de matériel ou de main-d’œuvre. Cette garantie NE couvre PAS l’usure normale. Si toute pièce est défectueuse au cours de la période couverte par la garantie, votre seul et unique recours consiste à la faire réparer ou remplacer, au choix et aux frais du fabricant, à l’exception du coût d’expédition.
Le consommateur est responsable de payer les frais liés à l’expédition de l’appareil au fabricant.
Cette garantie n’est pas transférable et s’applique uniquement à l’acheteur initial, sur présentation d’une preuve d’achat originale. Cette garantie ne s’applique pas en cas de mauvais traitement, de mauvaise utilisation ou de réparation non autorisée. L’appareil ne contient aucune pièce réparable.
N’essayez pas de réparer vous-même ce produit : l’ouverture ou le retrait du couvercle présente un risque de blessure. Le fabricant renonce à toute responsabilité en matière de blessure découlant de l’ouverture de l’appareil.
Tout dommage mécanique lié à l’ouverture de l’appareil peut annuler la garantie. TOUTE GARANTIE IMPLICITE, Y COMPRIS TOUTE GARANTIE DE QUALITÉ
MARCHANDE OU DE BON FONCTIONNEMENT À UNE FIN PRÉCISE, EST PAR LA
PRÉSENTE LIMITÉE À LA DURÉE PRESCRITE SUSMENTIONNÉE. En aucun cas le fabricant n’est responsable de dommage immatériel ou accessoire attribuable à ce produit. La présente garantie vous accorde des droits légaux précis. Vos autres droits légaux peuvent varier selon les lois de chaque territoire.
Veuillez conserver la preuve d’achat originale pour assurer l’enregistrement de votre produit et la réception des renseignements sur la garantie.
Instructions relatives au retour
Appelez au 877-654-1991 pour obtenir un numéro d’autorisation de retour (#AR) vous permettant de renvoyer un produit défectueux.
Enregistrement du produit
Veuillez enregistrer votre nouveau produit en appelant au 877-654-1991.
Nous joindre
Pour obtenir de plus amples renseignements, veuillez nous appeler au
877-654-1991.
Elevate your lifestyle!
15
Élevez votre style de vie!
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
IC Caution:
RSS-Gen Issue 5 March 2019 "&" RSS-Gen numéro 5 mars 2019
- English:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
- French:
Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et
Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d'interférences.
(2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil.
Tout changement ou modification non expressément approuvé par la partie responsable de la conformité pourrait annuler
l'autorité de l'utilisateur à utiliser l'équipement.
Déclaration d'exposition RF:
L'équipement est conforme à la limite d'exposition aux radiations de la IC établie pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
Tải xuống
Quảng cáo