Cisco TelePresence PrecisionHD Camera - 1080p12x Installation Guide

Add to my manuals
8 Pages

advertisement

Cisco TelePresence PrecisionHD Camera - 1080p12x Installation Guide | Manualzz

Cisco TelePresence Precision Camera Bracket Kit

InstallatIon guIde

The camera bracket kit is designed for multiple mounting scenarios.

By combining the parts in various ways the camera can be wall mounted above or below the monitor, it can be mounted upside down on the wall as well as upside down in the ceiling.

78-100222-01C0 Cisco TelePresence Precision Camera Bracket Kit Installation Guide | JULY 2014. Copyright © 2014 Cisco Systems, Inc. All rights reserved.

Installation

Contents

A. 1 x Angle bracket for wall mount

B. 1 x Camera bracket

C. 1 x Interface bracket

D. 4 x Screw, M4x4

E. 4 x M3x14 T7,

thread lock screw a B

F. 1 x 1/4” UNC screw

G. 1 x Torx key, T7

H. 1 x Allen key, 4mm

I. 1 x Cable tie

C

Remove pre-mounted screws

Applies to camera model Precision 60 Camera , and all mounting options. You can skip this step if you have the PrecisionHD 1080p4x S2 Camera.

Place the Precision 60 Camera on a stable surface with the connectors turned up and remove the four pre-mounted screws. note: The original pre-mounted screws must be installed if the camera bracket is not in use.

note: The pre-mounted screws are too short for safe mounting of the camera bracket.

Model: Precision 60 Camera

ReMoVe sCReWs and do not use torx key t7 ( g ) d g e

H I

F not included

4 x Screws (M6) for attaching the interface bracket ( C ) are not included.

Cameras supported

The Precision Camera Bracket Kit can be used with the following cameras:

• Cisco TelePresence Precision 60 camera

• Cisco TelePresence PrecisionHD 1080p4x S2

Read before you start

safety information

Due to the size and mass of this product it is important that the wall/ ceiling mounted system is safely installed according to these installation instructions.

The wall/ceiling and mounting hardware must be able to safely support the product.

The wall/ceiling mounted system must be installed by qualified personnel, in accordance with state and local building regulations.

78-100222-01C0 Cisco TelePresence Precision Camera Bracket Kit Installation Guide | JULY 2014. Copyright © 2014 Cisco Systems, Inc. All rights reserved.

Mounting options

Having eye contact with remote participants is essential for a good user experience.

To achieve this the camera can be mounted above/below the monitor, in the ceiling, or upside down.

1) Wall mount

The camera is mounted on the wall, above the monitor.

2) Wall mount

The camera is mounted on the wall, below the monitor.

Ensure that there is enough space for the camera house to move freely.

3) Wall mount, upside down

The camera is mounted on the wall, upside down, above or below (not shown) the monitor.

Ensure that there is enough space for the camera house to move freely.

78-100222-01C0 Cisco TelePresence Precision Camera Bracket Kit Installation Guide | JULY 2014. Copyright © 2014 Cisco Systems, Inc. All rights reserved.

4) Ceiling mount

The camera is mounted in the ceiling, upside down. See the other side ot this sheet for mounting instructions.

Option 1-2: Wall mount

1) 2) 3) Model: Precision 60 Camera

Interface bracket ( C )

Select the type of fasteners suitable for the type of material the wall is made of (wood, concrete, gypsum).

Screws are not included.

4 ×

Camera bracket ( B ) angle bracket ( a )

M4x4 ( d ) allen key 4 mm ( H )

M3x14 t7 ( e ) thread lock screws torx key t7 ( g )

1/4” unC ( F ) allen key, 4mm ( H )

4)

Cabling

Connect the cables as described in the Installation Guide that is supplied with the codec, or check the user documentation on our web site.

• Cisco TelePresence SX80 Codec: www.cisco.com/go/sx-docs

• Cisco TelePresence C Series Codec: www.cisco.com/go/cseries-docs

• Cisco TelePresence Precision cameras: www.cisco.com/go/camera-docs the Codec

Installation guide

78-999999-01A0 | MONTH 2014.

Copyright © 2014 Cisco Systems, Inc Slide camera on place. The same principle applies to both camera models.

78-100222-01C0 Cisco TelePresence Precision Camera Bracket Kit Installation Guide | JULY 2014. Copyright © 2014 Cisco Systems, Inc. All rights reserved.

Option 3: Wall mount, upside down

1) 2) 3) Model: Precision 60 Camera Model: PrecisionHd 1080p4x s2 Camera

Interface bracket ( C )

Select the type of fasteners suitable for the type of material the wall is made of (wood, concrete, gypsum).

Screws are not included.

M6

4 ×

Camera bracket ( B ) angle bracket ( a )

M4x4 ( d ) allen key 4 mm ( H )

4 × M3x14 t7 ( e ) thread lock screws torx key t7 ( g )

1 × 1/4” unC ( F ) allen key, 4mm ( H )

4)

Cabling

Connect the cables as described in the Installation Guide that is supplied with the codec, or check the user documentation on our web site.

• Cisco TelePresence SX80 Codec: www.cisco.com/go/sx-docs

• Cisco TelePresence C Series Codec: www.cisco.com/go/cseries-docs

• Cisco TelePresence Precision cameras: www.cisco.com/go/camera-docs the Codec

Installation guide

78-999999-01A0 | MONTH 2014.

Copyright © 2014 Cisco Systems, Inc Slide camera on place. The same principle applies to both camera models.

78-100222-01C0 Cisco TelePresence Precision Camera Bracket Kit Installation Guide | JULY 2014. Copyright © 2014 Cisco Systems, Inc. All rights reserved.

Option 4: Ceiling mount

If not already done; follow instructions in the Remove pre-mounted screws section.

1) 2) Model: Precision 60 Camera

Interface bracket ( C )

Select the type of fasteners suitable for the type of material the ceiling is made of.

Screws are not included.

M6

Camera bracket ( C )

4 ×

M3x14 t7 ( e ) thread lock screws torx key t7 ( g )

3) Slide camera on place. The same principle applies to both camera models.

Model: PrecisionHd 1080p4x s2 Camera

1 ×

Camera bracket ( C )

1/4” unC ( F ) allen key, 4mm ( H )

Make sure the snap lock is engaged.

Secure the camera with a cable tie.

1 ×

Cable tie ( I )

Cabling

Connect the cables as described in the Installation Guide that is supplied with the codec, or check the user documentation on our web site.

• Cisco TelePresence SX80 Codec: www.cisco.com/go/sx-docs

• Cisco TelePresence C Series Codec: www.cisco.com/go/cseries-docs

• Cisco TelePresence Precision cameras: www.cisco.com/go/camera-docs

78-100222-01C0 Cisco TelePresence Precision Camera Bracket Kit Installation Guide | JULY 2014. Copyright © 2014 Cisco Systems, Inc. All rights reserved.

the Codec

Installation guide

78-999999-01A0 | MONTH 2014.

Copyright © 2014 Cisco Systems, Inc

Cable management

Use a cable management of your choice to make it look nice and tidy.

How to release camera from the bracket

If using the angle bracket, route the cables through the hole.

Press and hold to release the snap lock.

Carefully lift the camera off the bracket.

78-100222-01C0 Cisco TelePresence Precision Camera Bracket Kit Installation Guide | JULY 2014. Copyright © 2014 Cisco Systems, Inc. All rights reserved.

Where to find additional support and information for your Cisco TelePresence product

user documentation

For more information about Cisco TelePresence Precision 60 Camera see the user documentation that is available on our web site: http://www.cisco.com/go/camera-docs support

For support, go to: http://www.cisco.com/support

Room design and room setup

We invite you to explore the Project Workplace guide to inspire you on room design and room setup. http://www.cisco.com/go/projectworkplace

Contact

Contact Cisco or find an overview of the Cisco offices.

http://www.cisco.com/go/offices

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this

URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

78-100222-01C0 Cisco TelePresence Precision Camera Bracket Kit Installation Guide | JULY 2014. Copyright © 2014 Cisco Systems, Inc. All rights reserved.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement