MSI P65 Creator (Intel® 9th Gen) (GeForce ) CONTENT CREATION Owner's Manual

TV @nywhere Satellite
User’s Manual
1
COPYRIGHT NOTICES The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take
every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are
under continual improvement and we reserve the right to make changes without notice.
TRADEMARKS
All trademarks are the properties of their respective owners.
MICRO-STAR INTERNATIONAL Statement
All contents are subject to change without notice.
One year guarantee is for the device only. Warranty for accessories expired within seven days of
purchase date.
WEEE Statement
lobal environment and as an environmentalist, MSI must remind you that...Under the European Union
("EU") Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005,
products of "electrical and electronic equipment" cannot be discarded as municipal waste anymore and manufacturers of covered
electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take
back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local
collection points.
Hinweis von MSI zur Erhaltung und Schutz unserer UmweltGemäß der Richtlinie 2002/96/EG über Elektro-und
Elektronik-Altgeräte dürfen Elektro-und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit
verschiedene Sammel-und Recyclingunternehmen beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am
Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer
lokalen Altgerätesammelstelle in Ihrer Nähe.
logiste et afin de protéger l’environnement, MSI tient à rappeler ceci...Au sujet de la directive européenne
(EU) relative aux déchets des équipement électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les
produits électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les
fabricants de ces équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte cette exigence
relative au retour des produits en fin de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner
localement ces matériels dans les points de collecte.
i zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da vas podesti
2
da…Po Direktivi Evropske unije ("EU") o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od
13. Avgusta 2005, proizvodi koji spadaju pod "elektronsku i električnu opremu" ne mogu više biti odbačeni kao običan otpad i
proizvo ači ove opreme biće prinu eni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. MSI će poštovati
zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode
možete vratiti na lokalnim mestima za prikupljanje.
ić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI przypomina,
e...Zgodnie z Dyrektywą
Unii Europejskiej ("UE") dotyczącą odpadów produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w
ycie 13 sierpnia 2005, tzw. “produkty oraz wyposa enie elektryczne i elektroniczne " nie mogą być traktowane jako śmieci
komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z
u ycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z u ycia.
Produkty MSI będzie mo na zwracać w wyznaczonych punktach zbiorczych.
i özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:Avrupa Birliği (AB) Kararnamesi Elektrik ve
Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve
elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten
sonra ürünleri geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI
ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.
leží nám na ochraně životního prostředí -společnost MSI upozorňuje...Podle směrnice Evropské unie ("EU") o likvidaci
elektrických a elektronických výrobků 2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat "elektrické a elektronické
výrobky" v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni
odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI,
prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat v místních sběrnách.
jük, illetve környezetvéd ként fellépve az MSI emlékezteti Önt,
hogy ...Az Európai Unió („EU") 2005. augusztus 13-án hatályba lép , az elektromos és elektronikus berendezések hulladékairól
szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhet ek lakossági hulladékként, és
az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az
MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek
esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gy jt helyre viheti.
l’ambiente, MSI, da sempre amica della natura, ti ricorda che….In base alla Direttiva dell’Unione Europea
(EU) sullo Smaltimento dei Materiali Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti
alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali
saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati
MSI che sono stati venduti all’interno dell’Unione Europea alla fine del loro ciclo di vita. È possibile portare i prodotti nel più vicino
punto di raccolta.
Компания MSI предпринимает активные действия по защите окружающей среды, поэтому напоминаем вам, что.... В соответствии с директивой
Европейского Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива
WEEE 2002/96/EC), вступающей в силу 13 августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут
рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки
по окончании срока службы. MSI обязуется соблюдать требования по приему продукции, проданной под маркой MSI на территории EC, в переработку
3
по окончании срока службы. Вы можете вернуть эти изделия в специализированные пункты приема.
ida con la protección del medio ambiente, recomienda: Bajo la directiva 2002/96/EC de la
Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos
clasificados como "eléctricos y equipos electrónicos" no pueden ser depositados en los contenedores habituales de su municipio,
los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI
estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al final de su periodo de vida.
Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa
autorizada para la recogida de estos residuos.
Om het milieu te beschermen, wil MSI u eraan herinneren dat….De richtlijn van de Europese Unie (EU) met
betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet
meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het
eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en
verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten
4
Table of Contents
Chapter 1 TV@nywhere Satellite Introduction .................................................. 6
Chapter 2 Installation Introduction..................................................................... 9
2.1 Hardware Installation............................................................................ 10
2.2 Software Installation............................................................................. 11
Chapter 3 Channel Scanning ............................................................................ 30
Chapter 4 TV@nywhere Satellite Application Programs ................................ 37
4.1 Control Panel......................................................................................... 37
4.2 Functions............................................................................................... 39
4.3 Configuration Page............................................................................... 42
4.5 Keyboard Shortcuts.............................................................................. 48
Appendix 1 Remote Controller Key Definition ................................................ 49
Appendix 2 Trouble Shooting ........................................................................... 53
5
CHAPTER
TV @nywhere Satellite
Product Introduction
This chapter provides a brief introduction of
hardware/software of TV@nywhere Satellite
products and includes information to help you
set up the system.
Outline:
Introduction
System Requirements
Features
Package contents
6
Chapter 1 TV@nywhere Satellite Introduction
1.1 Introduction
TV@nywhere Satellite series products allow you to watch digital TV & Radio
programs via PCI interface. With TV@nywhere, users are able to watch, record
& play back high quality digital TV program on their PC. Please read the
instructions carefully before you begin the installation.
1.2 System Requirements
• CPU :Pentium 4 2.0G HZ or above
• 256MB System RAM or above
• One Free PCI Slot
• VGA card with at least 32MB memory and DxVA support
• Sound card or on board sound chip
• Microsoft® Windows® XP SP2/ MCE 2005/ VISTA
• Microsoft® Windows® Media Player 9.0 or later
• Microsoft® DirectX9.0C or later
• Digital Satellite Dish & LNB
1.3 Features
• Digital TV & Radio receiving (DVB-S)
• Watch free-to-air digital satellite TV programs
• Listen to digital stereo radio
• High Definition & Crystal Clear Video Quality
• Support HDTV receiving
• 4:3 & 16:9 selectable aspect ratio
• High speed Internet via satelliteDVB data service
• High download speed via satellite bandwidth
• Personal Video Recording
• Instant & pre-scheduled record programs as MPEG II format
• Wake Up Schedule Recording
• Direct Burn to DVD format and Time-Shifting
• TV Function
• SAP (Language option)
• Electronic Program Guide (EPG)
• Transponder, region, and Frequency range Auto Scan
• Multiple Frame Capture
• Multi Channel Preview
• Favorite List
7
• Additional AV/ S-Video input for connecting other video sources
(Such as DVD Player/ VCD/ VHS/ camcorder)
• Compatible with Windows XP / MCE 2005
• Windows Vista Certified
1.4 Package Contents•
• TV@nywhere Satellite-PCI interface
• Quick installation guide
• User manual
• Software Pack CD *
• Infrared remote control with AAA batteries
• Infrared remote control receiver
Note:
Include MAGIX Goya Base software:
• Goya Base is XP and Vista compatible and is even running under the MCE 2005
version
• Some functions are unavailable; please upgrade to MAGIX Goya Multimedia for
more functions
8
CHAPTER
Installation
This chapter shows you how to easily install the
hardware and software of TV@nywhere
Satellite products.
Sections include：
Hardware installation
Software installation
9
Chapter 2 Installation Introduction
2.1 Hardware Installation
Step1: Install TV @nywhere Satellite card into your PC.
Step2: Connect the antenna cable.
Step3: Insert remote control receiver
Receiver with din connector: Please connect the remote control receiver to the
connector on the tuner card, and place it at a proper location where remote control
signal can be well received.
10
2.2 Software Installation
Driver Installation
Step1: Cancel “New Hardware Wizard”
After the computer is turned on, Windows will find New Hardware. Please
choose “Cancel” from the pop up windows. We will install the driver later by
the TV @nywhere Satellite installation program automatically.
Step2: Insert DIGITALTV CD-ROM
Insert the TV @nywhere Satellite driver CD into your CD-ROM drive, the
“Autorun” window should appear. Click on “Install Software and Driver”. If
the “Autorun” window does not appear, please open the “MSI TV @nywhere
Satellite” folder in CD-ROM and launch the “Setup” program manually.
STEP 3: Install finished
You will see MSI TV@nywhere Satellite icon on your desktop.
Installation Guide For DVBS4MCE
1. Install DVBS4MCE package.
1.1
Install Utility for Display Digital TV in MCE
You can also enjoy the Digital TV in Windows Media Center.
Press the icon and install the utility .Then you can display the
satellite program in MCE.
2. Manual for DVBS4MCE
11
2.1
“Double Click” or “Right Click then choose Open” to Popup DVBS4MCE.
2.2
Click Device to Select BDA Filter Device.
12
2.3
Click Drop List to Select Remote Control .
2.4
Click Drop List to Select Satellite.
13
2.5 Press “Setting” to Select Satellite.
14
2.5.1
15
Press “Select All TP”,“Select All Hor”, “Select All Ver”, “Un-Select All ” or “Click on
Transponder” to choose Transponders.
2.5.2
16
Press “OK” to select this Transponder.
Press “Cancel” to not select this Transponder.
2.6 Click Drop List to Select LNB POWER.
17
18
19
2.7
Click Drop List to Select DiSEqC.
20
2.8
Click Drop List to Select LNB TYPE.
21
2.9
Click Drop List to Select 22K Tone.
22
2.10
Press ”About” to Open About Dialog.
23
2.10.1
Press ”OK”,”Cancel” or “Close” to Close About Dialog.
24
2.11
Press ”Quit” to Close DVBS4MCE.
25
2.12
Press ”Apply” to make settings take effect and minimize DVBS4MCE.exe.
26
2.13
Press ”Cancel”, “Minimize”or “Close” to make settings not take effect and minimize
DVBS4MCE.
27
2.14
Press “Reboot Now” (suggest) or “Reboot Later”(reboot by yourself).
28
CHAPTER
Software Setup
This chapter describes that how to configure all the
parameters of the system in detail and lists the
guidelines you need for setting up the TV@nywhere
Satellite system.
29
Chapter 3 Channel Scanning
Step 3.1
When you launch TV @nywhere Satellite application, you will see a control panel
and a screen displaying TV program. Please click the green button located at the
very left side of control panel to pop up extended control panel.
After you click on extended panel button, you will see extend panel on your screen.
Please click the second left button at the first row for “Channel Scan”.
Step 3.2
There are two options in this configuration page. If you use BASIC setting
(meaning connecting LNB directly to PCI-Sat card without other STB; use fixed
motor without any switch), please choose “Easy Setup” for scanning satellite. If
you have used switch for connecting our card, please select the “Satellite Setup”
for advanced setting.
Note: Remember to click “Apply” every time after you change the satellite
setting.
“Easy Setup”
After you click on “Easy Setup”, please choose the satellite that you like to target
and click the “Scan” button. You may go to http://www.satcodx.com/eng/ for more
satellite information.
“Satellite Setup”
In satellite setup page, there are five options for you to set up your satellite: 22
30
KHz, Simple DiSEqC, and DiSEqC 1.0, DiSEqC 1.2/USALS).
your situation.
Choose one for
Note: You must choose which kind of LNB you are using out of these five
options. There are three types of LNB: Normal/Universal/Custom. If
you are using “ Custom ”, you need to fill in the parameters for LNB 1 and
LNB 2.
31
Configuration 1: None
If you only have one dish and LNB with fixed motor, you may choose this option.
Please choose the satellite that you like to target and click the “Scan” button
Configuration 2: 22 KHz
Please choose a satellite you like to scan and the kind of LNB you want to use.
Please click Scan button for start to scanning satellite. Please repeat above step
for 0 KHz if necessary.
32
Configuration 3: Simple DiSEqC
Please choose a satellite you like to scan and the kind of LNB you want to use.
Please click Scan button for start to scanning satellite. Please repeat above step
for 0 KHz if you need.
DiSEqC 1.0
Please choose a satellite you like to scan and the kind of LNB you want to use.
Please click Scan button for start to scanning satellite. Repeat above steps for
DiSEqC B, DiSEqC C, and DiSEqC D if needed.
scanning satellite.
Please click “Scan” button for
33
onfiguration 4: DiSEqC 1.2/USALS
Please choose the satellites and select power "ON" for LNB power option. If you
have USALS motor, please input the longitude and latitude of your location. You
may use driver east/west function to point it to the satellite you want.
Notes for USALS motor：
You could get more information about the longitude and latitude of your location from
this website – http://www.bcca.org/misc/qiblih/latlong.html
Motor：
The Functions of Motor Table
Drive East
Turn motor to east
Drive West
Turn motor to west
Set East limit
Set the limit for East angle turning
Set West limit
Set the limit for West angle turning
Cancel limit
Cancel the default limit
Go to Sat.
Start turning motor to the satellite you have selected (for
USALS Motor Only)
Go to Zero
return motor to original (zero) point
Note: If you like to set up Sat2, Sat3, Sat4, and Sat5, please repeat the above
steps.
34
Step3.3
When the Scanning is completed, you will see the summary window as shown
below.
It contains the TV and Radio channels that had been scanned. After scanning is
completed, click “OK” to finish this configuration.
35
CHAPTER
TV @nywhere Satellite Application
Programs
Powerful TV@nywhere Satellite Application
Program can let you watch DTV on your PC.
Please read this chapter to learn more about
TV@nywhere Satellite application programs.
Sections include:
Control Panel
Features
Right-Click Menu
Keyboard Shortcuts
36
Chapter 4
TV@nywhere Satellite Application Programs
4.1 Control Panel
Main control bar and control panel icons:
Icon
Function
Icon
Function
Open “Favorite List”
Open Extended Panel
Capture still image.
Language
Channel up
Subtitle
Channel down
On Line Help
Record
Pause
Rewind
Fast Forward
Time Shifting
Stop
Hibernate
Control Speaker on, off,
LL, RR
Signal strength
Mute
Volume
Signal quality
Configuration
Video Adjustment
37
Channel Scan
EPG Function
Multi-channel Preview
Hyper Links and Sat/Ter
list live update
Capture Pool
Record List
Teletext
Display Change
Other Information:
Clock (Set by host computer’s time clock)
Channel and program time
Stop/Play/Time Shifting
Electronic Program Guide/ AV switch
38
4.2 Functions
Video Recording
You can record video by clicking on . You can also schedule recordings in the
“Recording Setup” screen in the Properties menu
.
You may also setup
Once/Daily/Weekly schedule recording under Record Mode.
scheduling weekly recording.
Specify day when
Electronic Program Guide (EPG)
Click
on the extended control panel to see the electronic program guide
provided by the content provider. From here you are able to obtain detail
information about the broadcasting programs. EPG will basically show current
and next program info while playing. Internet EPG is not available.
Multi-Language
Please click on
to change language. (Not all channels support SAP)
Note: Check your content provider to see if the programs support multi-language
Teletext
The application “Teletext” is a simple teletext browser.
To start this function, click
39
on the control panel when your DIGITALTV is running.
Note: Teletext is not supported under UK standard
Time-shifting
When you click
, the live program you are watching can be paused. Click it
again, the program will play from the moment that you had paused it so that you
won’t miss any part of the program. If you like to go back to the live program, click
and it will stop time-shifting function.
Multi-Channel Preview
Click on
on the control panel to preview multiple channels at the same time.
To watch the program you want, select it and click “Play”.
Note: You may only preview FTA channels from the same transponder.
Video adjustment (Digital TV only)
40
Capture
Click on
to capture a still frame of the program you are currently watching.
41
4.3 Configuration Page
Recording setup
Recording Path
Select a file where you want to save recorded files.
Analog/Capture recording quality
You may select Analog/Capture recording quality as high or low (higher
recording quality takes more space)
42
Playback setting
MPEG2 accelerator setting
If your VGA card supports DxVA function, you may enable this function to share
CPU loading
VBI setting
If your TV program has pixel mixing in video edge, you may select here to cut it out
Force Decoding noisy video frames setting
You may select here to force software to play TV program with bad reception
AC3 Audio Pass_Through (SPDIF output)
If you have Dolby sound card, you may enable this function to get 5.1 channel
sound effects. (Not all TV program carry Dolby sound)
Subtitle setting
You may select here to show subtitle automatically or not.
OSD
Enable “Auto play on star up” and then the OSD will show on the screen when you
start the player.
Auto play setting
You may select to play TV program directly after launching software
Mute setting
You may mute it when software is in minimum mode
Aspect ratio setting/ Full screen setting
You may select TV program to show in different aspect ratio
Stop playback while signal quality below
You may stop playing TV program when signal strength is below a specific degree
43
System setting
Capture setting
You may select to capture signal or multiple frames in native resolution or aspect
ration (small size picture) format. You can set time and interval for multi-capture.
Power management
If you choose “Reject”, TV@nywhere Satellite will stop your system from getting
into hibernate mode.
Predefined Program Classes
You may change Predefined program classes to classify program in “Program List”
page.
Remote Controller LCN channel selection support
You may set remote controller as “Logic Channel Number” mode (Recommend for
UK, France) or “Normal” mode (Recommend for other areas).
Remote Controller channel switch waiting delay 2 seconds
Channel changes 2 seconds after you press on the up or down button.
Start in full screen mode
You may select to start program as “full screen” mode or “normal size” mode
Time-Shifting buffer size
You may select maximum Time-Shifting time; the longer time you set, the bigger
disk space will be required.
Parental control password
You may set password to specific channels to avoid children from watching adult
programs. Password will be required when anyone want to watch these specific
44
channels.
Control panel setting
You may the size of the screen as” Windows mode” or “Full screen mode”
TV Application Priority
You may select TV program as first priority program of your PC. If other application
programs are used when playing TV, they will take CPU resource and slow down
the player.
45
Recording setup
You may create/modify/delete schedule recording here
46
4.4 Right Click Menu
Right click your mouse over the TV@nywhere Satellite interface to open a pop up
menu:
Play: Play video
Pause: Pause the video you are currently watching
Stop: Stop the video you are currently watching
Record: Record the video program you are currently watching
Rewind: Rewind when you are watching recorded video
Fast Forward: Fast forward when you are watching recorded
video
Time Shifting: Start or pause the “Time Shifting” function
Channel Up: Change to previous channel
Channel Down: Change to next channel
Last Channel: Change to the last channel
EPG: Show EPG window
Preview: Multi-channel preview (only for FTA channels)
Capture: Capture a still frame of the video
Teletext: Show teletext window.
Apid (SAP): Switch audio from different sources
Mute: Turn the sound off
Configuration: Show configuration page
Channel Scan: Show Channel Scan setting page.
Record List: Open record list
Favorite List: Open favorites list
Control Panel: Show control panel
Top Most: Place TV@nywhere Satellite always on the top
About: Display version information of TV@nywhere Satellite
DIGITALTV.
Exit: Turn off TV@nywhere Satellite.
47
4.5 Keyboard Shortcuts
Function
Keyboard Shortcut
Play
Enter
Stop
End
Pause
Space bar
Full Screen
Z
Properties windows
O
Record
Home
Stop Record
End
Program list
L
Time Shifting
T
Channel up
Page up
Channel down
Page down
Volume up
Shift + Arrow up
Volume down
Shift + Arrow down
Help
F1
Key cancel
Esc
Key enter
Enter
DIGITALTV Exit
X
Mute
M
Right Speaker
Ctrl + R
Left Speaker
Ctrl + L
Favorites List
V
EPG
E
Preview
K
Fast Forward
F
Rewind
R
48
Appendix 1 Remote Controller Key Definition
Power
Favorite list
Preview
EPG
Teletext
Channel Number
Cancel
Recording list
Clear
Tab
Back
Channel + or Volume + or Play
Time-shifting
Stop
Record
Capture the picture
SAP
Skip
Full screen
Subtitle
Hibernate system
A/V switch
L/R audio
Mute
49
Key Definitions
Key
Description
Win XP/2000
TV@nywhere Satellite
Power
Y
Favorite List
Y
Teletext
Y
Preview
Y
Info/EPG
Y
Record List
Y
0-9
Y
Cancel
Y
Clear
Y
Back
Y
Tab
Y
50
Arrow keys – Go Up, Left,
Down, Right
Y
Enter/OK
Y
Volume up / down
Y
Channel up / down
Y
Record
Y
Play
Y
Pause
Y
Stop
Y
Fast Rewind
Y
Fast Forward
Y
Replay
Y
Skip
Y
Capture
Y
SAP
Y
Play in Full Screen
Y
51
Subtitle
Y
Mute
Y
L/R audio
Y
Hibernate system
Y
A/V switch
Y
Recall previous channel
Y
PIP
N/A
Zoom +/-
N/A
Color buttons
N/A
If you use MCE OS, the following keys can be applied.
52
Appendix 2 Trouble Shooting
General
1. Windows cannot recognize DVB card correctly
You may switch to a different PCI slot and try again. Please make sure that your
PCI slot and PCI part of card are clean
2. Error message shows up "Setting error! Fail to play the program!" or "Fail
to play your program":
Please check the driver of VGA card and sound card
Please make sure the hardware and software settings are correct, and try
scanning again
Please install Microsoft DirectX9.0C and Media Player 9.0 or higher version
Might be due to poor signal quality so that TV@nywhere Satellite can not
receive enough data of program or received wrong data.
It is a paid channel and you are not authorized to see
Make sure to use the latest TV@nywhere Satellite software version for decoder.
Register C:\Program Files\PC-TV\Common\Bin\claud.ax and CLVSD-dtv.ax
again with regsvr32.exe in C:\Windows\System32.
3. Screen blacked out when playing or playback freezes on first picture.
Find and install the latest VGA driver and DirectX 9.0C and check if any other DTV
players are installed, e.g. ProgDVB. If yes, remove them and uninstall all the filter
drivers
4. Which format is recorded by TV@nywhere Satellite? Why do I have
problem with converting/burning this file?
MPEG2. However, since some broadcasters have problems at Kpbs rate in their
TS (which is over DVD format limit), you will need to use MPEG editing software to
adjust Kpbs rate.
5. Error message “Hardware setting error”
Please reinstall driver
6. Video playing but Audio failed
Please checks the sound card or the volume setting.
7. Can I view and record different channels simultaneously?
Yes, but the channels must be from the same transponder
53
8. Why my EPG, Teletext and Subtitle cannot be shown?
In some areas, the broadcasters do not provide the mentioned services, please
contact you broadcaster for confirmation.
9. Cannot find driver for R/C receiver.
Please re-plug the receiver or change different PCI slot. You do not need to
install additional drivers because it will install the built-in HID driver in your OS.
10. Remote control does not work
Check remote control batteries. Check remote receiver: the red light on receiver
will remain ON as it is getting signal from the remote control. Also, point your
remote control to the receiver when in use.
SAT
1. Cannot lock any channels when doing auto scan?
Please click "Apply" button after you change any settings in "Dish Setup" before
scanning the satellite or transponders.
Check whether the dish aims to the right satellite or not.
Check the cable connection between TV@nywhere Satellite Card and the dish.
Please note that the cable should be connected to "LNB In" F-connector of the
card.
Set LNB power on for supplying power to LNB. Please note that most LNB
need power supply from tuner.
Check whether the voltage for LNB is correct or not. (18V-21V for Horizontal or
11V-14V for Vertical)
Check the settings of satellite; for example, LNB frequency is for C band or Ku
band.
Check the switch settings in "LNB - Switch" setting in "Properties".
Please re-insert the TV@nywhere Satellite Card to another PCI slot.
2. When the dialog "Unlock!" pops up.
Check the setting of polarization (H or V).
Check the cable connection between TV@nywhere Satellite Card and the dish.
Please note that the cable should be connected to "LNB In" F-connector of the
card.
3."22 KHz error" and "LNB Power Open Error"
Make sure that your TV@nywhere Satellite Card Driver was installed. (from
device manager)
54
Please note that any other TV tuner card equipped with Conexant BT878 and
you TV@nywhere Satellite Card can not be installed in the PC at the same time.
Please remove the analog TV tuner card and its driver.
Re-insert the TV@nywhere Satellite Card to another PCI slot. The previous
PCI slot might be damaged.
Clean up the golden finger of the TV@nywhere Satellite Card by pencil eraser.
4.Why can I not receive 18V program?
The LNB is 13V vertical LNB. IRD only receives 13V Program, TV@nywhere
Satellite only receive 18V Program. LNB is biased 2 cm. Please adjust the LNB
or contact the dish installer for service.
55

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project