Eaton EG-frame direct rotary handle mechanism Owner's Manual
Advertisement
Advertisement
1
IL0510TE0004
Instruction Leaflet for E-Frame Direct Rotary
Handle Mechanism
Warning
DO NOT ATTEMPT TO INSTALL OR PERFORM MAINTENANCE ON EQUIPMENT WHILE IT IS
ENERGIZED. DEATH OR SEVERE PERSONAL INJURY CAN RESULT FROM CONTACT WITH ENER-
GIZED EQUIPMENT. ALWAYS VERIFY THAT NO VOLTAGE IS PRESENT BEFORE PROCEEDING.
2
Included with
interlock version only
3
Reset
OFF/O
4
Remove wire tie after installationon
Remove covers to access breaker adjustments and push-to-trip button.
ON/I
Trip
Twist
Twist
Test full range of motion.
Effective Date 10/03 1
5
Customer supplied safety wire
Reset
OFF/O
ON/I Trip
IL0510TE0004
6
Customer-supplied padlock
Press down on tab
Make sure pin is seated in hole
2 Effective Date 10/03
9
IL0510TE0004
Effective Date 10/03
For din rail mounting,
add .34 to dimensions
2.77 and 4.20.
3
NOTES
Eaton Corporation
Cutler-Hammer business unit
Technology Center
170 Industry Drive
Pittsburgh, PA 15275
©2001 Eaton Corporation
All Rights Reserved
Printed Tech Center USA
Pulbication IL0510TE0004 H02
Effective : October 2003

Public link updated
The public link to your chat has been updated.
Advertisement